V24C48E300BS3 [VICOR]
DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid,;型号: | V24C48E300BS3 |
厂家: | VICOR CORPORATION |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, |
文件: | 总13页 (文件大小:501K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet
24V Input Maxi Family
DC-DC Converter Module
Features
• RoHS Compliant (with F or G pin option)
• DC input range: 18 – 36 V
• Input surge withstand: 50 V for 100 ms
• DC output: 3.3 – 48 V
• Programmable output: 10 to 110%
• Regulation: 0.5% no load to full load
• Efficiency: Up to 88%
•
Maximum operating temp: 100°C, full load
• Power density: up to 80 W per cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture
Shown actual size:
4.6 x 2.2 x 0.5 in
117 x 56 x 12,7 mm
Absolute Maximum Ratings
Product Overview
These DC-DC converter modules use
advanced power processing, control and
packaging technologies to provide the
performance, flexibility, reliability and cost
effectiveness of a mature power component.
High frequency ZCS/ZVS switching
provides high power density with low
noise and high efficiency.
Parameter
Rating
-0.5 to +36
-0.5 to +7.0
-0.5 to +7.0
-0.5 to +1.5
1.0
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Notes
+In to –In voltage
PC to –In voltage
PR to –In voltage
SC to -Out voltage
-Sense to -Out voltage
See Module Output
Specifications
+Out to -Out, +Sense to -Out
Applications
Isolation voltage
in to out
in to base
out to base
Operating Temperature
Storage Temperature
Industrial and process control, distributed
power, medical, ATE, communications,
defense, aerospace
3000
1500
500
Vrms
Vrms
Vrms
°C
°C
Test voltage
Test voltage
Test voltage
M-Grade
-55 to +100
-65 to +125
500 (260)
750 (390)
5 (0.57)
M-Grade
°F (°C)
°F (°C)
in-lbs (N-m)
<5 sec; wave solder
<7 sec; hand solder
6 each
Pin soldering temperature
Mounting torque
Part Numbering
e.g. V24A12T400BL2
V24A
B
For a description of pin
options, see page 10.
Baseplate options include
slotted flanges, threaded
and through-hole.
Product Grade Temperatures (°C)
Grade Operating Storage
Output Power
Pin Style
Blank: Short Tin/Lead
L: Long Tin/Lead
S: Short ModuMate
N: Long ModuMate
F: Short RoHS
Baseplate
Blank: Slotted
2: Threaded
Output Voltage
Vout
3.3 V
5 V
Pout
264 W, 200 W
400 W, 300 W
300 W
400 W, 300 W
400 W, 300 W
400 W, 300 W
400 W, 300 W
400 W, 300 W
400 W, 300 W
3 V 3 = 3.3 V
5 = 5 V
E
C
T
=
=
=
=
=
-
-
-
-
-
10 to +100
20 to +100
40 to +100
40 to +100
55 to +100
-
20 to +125
40 to +125
40 to +125
55 to +125
65 to +125
See page 11 for dimensions.
For other package sizes and
power levels, see the Mini
(half size) and Micro
-
-
-
-
3: Through-hole
8 = 8 V
8 V
12 = 12 V
15 = 15 V
24 = 24 V
28 = 28 V
36 = 36 V
48 = 48 V
H
M
12 V
15 V
24 V
28 V
36 V
48 V
G: Long RoHS
(quarter size) datasheets.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 1 of 13
Set your site on VICOR at www.vicorpower.com
MODULE FAMILY ELECTRICAL CHARACTERISTICS
Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature,
unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate.
MODULE INPUT SPECIFICATIONS
Parameter
Min
18
Typ
24
Max
36
Unit
Vdc
Vdc
Vdc
Notes
Operating input voltage
Input surge withstand
Undervoltage turn-on
See undervoltage turn-off note
<100 ms
50
17.5
15.3
37.8
17.9
Modules will operate down to 16 Vin at 75% rated power
after startup at >17.9 V except the following models:
3.3 V/264 W, 5 V/400 W, 12 V/400 W, 15 V/400 W, 28 V/400 W
Undervoltage turn-off
Overvoltage turn-off/on
14.8
36.3
Vdc
Vdc
39.6
MODULE OUTPUT SPECIFICATIONS
Parameter
Output voltage setpoint
Line regulation
Min
Typ
Max
1%
Unit
Vout nom
%
Notes
Nominal input; full load; 25°C
Low line to high line; full load
Over operating temperature range
10 to 100% of full load
0.02
0.002
2
0.20
0.005
5
Temperature regulation
Power sharing accuracy
% / °C
%
Of nominal output voltage. For trimming below 90%
of nominal, a minimum load of 10% of maximum
rated power may be required.
Programming range
10
110
%
+Out to -Out, +Sense to -Out – Absolute Maximum Ratings
3.3 V
5 V
-0.5 to 4.7
-0.5 to 7.0
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
8 V
-0.5 to 10.9
-0.5 to 16.1
-0.5 to 20.0
-0.5 to 31.7
-0.5 to 36.9
-0.5 to 47.2
-0.5 to 62.9
12 V
15 V
24 V
28 V
36 V
48 V
Note: For important information relative to applications where the converter modules are subject to continuous dynamic loading,
contact Vicor applications engineering at 800-927-9474.
THERMAL RESISTANCE AND CAPACITY
Parameter
Min
Typ
0.08
0.07
4.9
Max
Unit
°C/Watt
°C/Watt
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20265)
Baseplate to ambient
°C/Watt
Baseplate to ambient; 1000 LFM
Thermal capacity
1.1
165
°C/Watt
Watt-sec/°C
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 2 of 13
Set your site on VICOR at www.vicorpower.com
MODULE FAMILY ELECTRICAL CHARACTERISTICS (CONT.)
MODULE CONTROL SPECIFICATIONS
Parameter
Min
Typ
Max
Unit
Notes
PRIMARY SIDE (PC = Primary Control; PR = Parallel)
PC bias voltage
current limit
5.50
1.5
5.75
2.1
6.00
3.0
Vdc
mA
PC current = 1.0 mA
PC voltage = 5.5 V
PC module disable
PC module enable delay
PC module alarm
2.3
2.6
4
2.9
7
Vdc
ms
Must be able to sink ≥4 mA. See Fig. 1
0.5
6.1
Vavg
Volts
mA
UV, OV, OT, module fault. See Figs. 2 and 4
PR load >30 ohms, <30 pF
PR emitter amplitude
PR emitter current
5.7
150
375
2.4
5.9
PR receiver impedance
PR receiver threshold
PR drive capability
500
2.5
625
2.6
12
ohms
Volts
modules
25°C
Minimum pulse width: 20 ns
Without PR buffer amplifier
SECONDARY SIDE (SC = Secondary Control)
SC bandgap voltage
SC resistance
1.21
990
1.23
1000
0.033
1.25
Vdc
ohms
μF
Referenced to –Sense
1010
SC capacitance
SC module alarm
0
Vdc
With open trim; referenced to –Sense. See Fig. 6
MODULE GENERAL SPECIFICATIONS
Parameter
Min
Typ
Max
Unit
Notes
Remote sense (total drop)
Isolation voltage (in to out)
Isolation voltage (in to base)
Isolation voltage (out to base)
0.5
Vdc
0.25 V per leg (senses must be closed)
3000
1500
500
Vrms
Vrms
Vrms
Complies with reinforced insulation requirements
Complies with basic insulation requirements
Complies with operational insulation requirements
Isolation resistance (in to out)
Weight
10
megohms
8.2
8.3
ounces
(grams)
(232.5)
(235.3)
Temperature limiting
Agency approvals
100
115
°C
See Figs. 2 and 4
cURus, TÜV, CE
UL60950-1, EN60950-1, CSA60950-1, IEC60950-1
With appropriate fuse in series with the +Input
Note:
Specifications are subject to change without notice.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 3 of 13
Set your site on VICOR at www.vicorpower.com
MODULE SPECIFIC OPERATING SPECIFICATIONS
3.3 Vout, 264 W (e.g. V24A3V3C264BL)
Parameter
Min
Typ
78.5
75
Max
Unit
%
Notes
Efficiency
75.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
94
4.46
12
mV
4.14
4.3
8
Volts
Watts
%
0.02
0.2
80
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
81.6
56
92
92
108
108
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
3.3 Vout, 200 W (e.g. V24A3V3C200BL)
Parameter
Min
Typ
79.9
43
Max
Unit
%
Notes
Efficiency
73.9
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
54
mV
4.48
4.65
6.2
4.82
10
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
60.6
81.9
81.9
Amps
Amps
Amps
Current limit
61.8
42.4
69.7
69.7
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
5 Vout, 400 W (e.g. V24A5C400BL)
Parameter
Min
Typ
82
Max
Unit
%
Notes
Efficiency
80
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
152
6.25
6.8
190
6.47
10.1
0.25
80
mV
6.03
Volts
Watts
%
0.02
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
81.6
56
92
92
104
104
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
5 Vout, 300 W (e.g. V24A5C300BL)
Parameter
Min
Typ
84.4
120
6.25
7.2
Max
Unit
%
Notes
Efficiency
82.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
150
6.47
8.8
0.2
60
mV
6.03
Volts
Watts
%
0.02
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
61.2
42
69
69
81
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
81
8 Vout, 300 W (e.g. V24A8C300BL)
Parameter
Min
Typ
82.5
215
9.7
Max
Unit
%
Notes
Efficiency
79.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
269
10.1
13.9
0.2
mV
9.36
Volts
Watts
%
8.7
0.02
No load to full load; nominal input
0
37.5
50.7
50.7
Amps
Amps
Amps
Current limit
38.2
26.2
43.1
43.1
Output voltage 95% of nominal
Output voltage <300 mV
Short circuit current
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 4 of 13
Set your site on VICOR at www.vicorpower.com
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
12 Vout, 400 W (e.g. V24A12C400BL)
Parameter
Min
Typ
86.8
70
Max
Unit
%
Notes
Efficiency
85
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
88
14.9
10.2
0.2
mV
13.7
14.3
6.8
Volts
Watts
%
0.02
No load to full load; nominal input
0
33.33
43.5
43.5
Amps
Amps
Amps
Current limit
34
38.4
38.4
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
23.3
12 Vout, 300 W (e.g. V24A12C300BL)
Parameter
Min
Typ
87
Max
Unit
%
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
196
14.3
6.9
245
14.9
8.6
mV
13.7
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
25
Amps
Amps
Amps
Current limit
25.5
17.5
28.8
28.8
33.8
33.8
Output voltage 95% of nominal
Output voltage < 250mV
Short circuit current
15 Vout, 400 W (e.g. V24A15C400BL)
Parameter
Min
Typ
87.5
60
Max
Unit
%
Notes
Efficiency
86.1
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
75
18.5
9.4
mV
17.1
17.8
6.3
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
26.67
34.8
37.9
Amps
Amps
Amps
Current limit
27.2
18.6
30.7
30.7
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
15 Vout, 300 W (e.g. V24A15C300BL)
Parameter
Min
Typ
86.2
160
17.8
8.1
Max
Unit
%
Notes
Efficiency
85
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
200
18.5
10
mV
17.1
Volts
Watts
%
0.02
0.2
20
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
20.4
14
23
23
27
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
27
24 Vout, 400 W (e.g. V24A24C400BL)
Parameter
Min
Typ
88.5
80
Max
Unit
%
Notes
Efficiency
87
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
100
29.1
12
mV
27.1
28.1
11
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
16.67
21.7
21.7
Amps
Amps
Amps
Current limit
17
19.2
19.2
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
2.25
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 5 of 13
Set your site on VICOR at www.vicorpower.com
MODULE SPECIFIC OPERATING SPECIFICATIONS
24 Vout, 300 W (e.g. V24A24C300BL)
Parameter
Min
Typ
88.2
85
Max
Unit
%
Notes
Efficiency
86.8
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
107
29.1
10
mV
27.1
28.1
7.8
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
12.5
16.9
16.9
Amps
Amps
Amps
Current limit
12.7
8.75
14.4
14.4
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
28 Vout, 400 W (e.g. V24A28C400BL)
Parameter
Min
Typ
87.8
172
32.7
6.3
Max
Unit
%
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
215
33.9
9.5
mV
31.5
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
14.29
19.4
19.4
Amps
Amps
Amps
Current limit
14.5
10
16.4
16.4
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
28 Vout, 300 W (e.g. V24A28C300BL)
Parameter
Min
Typ
88
Max
Unit
%
Notes
Efficiency
87
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
100
32.7
7.1
125
33.9
9.3
mV
31.5
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
10.9
3
10.71
14.5
14.5
Amps
Amps
Amps
Current limit
12.3
12.3
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
36 Vout, 400 W (e.g. V24A36C400BL)
Parameter
Min
Typ
88
Max
Unit
%
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
120
41.9
10
150
43.4
13
mV
40.4
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
11.11
15
Amps
Amps
Amps
Current limit
11.3
7.77
12.8
12.8
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
15
36 Vout, 300 W (e.g. V24A36C300BL)
Parameter
Min
Typ
88.3
80
Max
Unit
%
Notes
Efficiency
87
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
100
43.4
12
mV
40.4
41.9
9.8
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
8.33
11.3
11.3
Amps
Amps
Amps
Current limit
8.49
5.83
9.58
9.58
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 6 of 13
Set your site on VICOR at www.vicorpower.com
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
48 Vout, 400 W (e.g. V24A48C400BL)
Parameter
Min
Typ
86.7
160
Max
Unit
%
Notes
Efficiency
84.7
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
200
57.8
12.7
0.2
mV
53.8
55.8
11.8
0.02
Volts
Watts
%
No load to full load; nominal input
0
8.33
11.3
11.3
Amps
Amps
Amps
Current limit
8.49
4.79
9.58
9.58
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
48 Vout, 300 W (e.g. V24A48C300BL)
Parameter
Min
Typ
87.1
180
55.7
7.7
Max
Unit
%
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (1 minute off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
225
57.7
10
mV
53.7
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
6.25
8.44
8.44
Amps
Amps
Amps
Current limit
6.37
4.37
7.19
7.19
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 7 of 13
Set your site on VICOR at www.vicorpower.com
CONTROL FUNCTIONS - PC PIN
Module Enable/Disable
Module Alarm
The module may be disabled by pulling PC below 2.3 V with
respect to the –Input. This may be done with an open collector
transistor, relay, or optocoupler. Multiple converters may be
disabled with a single transistor or relay either directly or via
“OR’ing” diodes. See Figure 1.
The module contains “watchdog” circuitry which monitors
input voltage, operating temperature and internal operating
parameters. In the event that any of these parameters are
outside of their allowable operating range, the module will
shut down and PC will go low. PC will periodically go high
and the module will check to see if the fault (as an example,
overtemperature) has cleared. If the fault has not been cleared,
PC will go low again and the cycle will restart. The SC pin
will go low in the event of a fault and return to its normal
state after the fault has been cleared. See Figures 2 and 4.
Primary Auxiliary Supply
At 5.7 V, PC can source up to 1.5 mA. In the example shown
in Figure 3, PC powers a module enabled LED.
Input Undervoltage
Input Overvoltage (See Note 1)
+IN
PC
+OUT
+IN
PC
Overtemperature
Module Faults
Auto
Restart
SW1
+S
SC
–S
2-20 ms typ.
50 Ω
f (V )
IN
SW1, 2, & 3
shown in
"Fault" position
SW2
1K
6K
SW3
PR
PR
Disable
5.7 Vdc
(0-3 mA)
–IN
1.23
Vdc
– OUT
–IN
1
Not applicable for 300 Vdc input family
Disable = PC <2.3 V
Figure 1 — Module enable/disable.
Figure 2 — PC/SC module alarm logic.
+IN
Fault
PC
40 μs typ.
5.7 V
PC
4 kΩ
"Module
Enabled"
PR
1.23 V
2–20 ms typical
SC
–IN
Figure 3 — LED on-state indicator.
Figure 4 — PC/SC module alarm timing.
+IN
PC
Optocoupler
+OUT
Comparator
+S
SC
–S
4 kΩ
Alarm
PR
1.00V
–IN
–OUT
Figure 5 — Isolated on-state indicator.
Figure 6 — Secondary side on-state indicator.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 8 of 13
Set your site on VICOR at www.vicorpower.com
CONTROL FUNCTIONS - SC PIN
Output Voltage Programming
The output voltage of the converter can be adjusted or
programmed via fixed resistors, potentiometers or voltage
DACs. See Figures 7 and 8.
+OUT
+OUT
+S
+S
RU
Trim Up
Error
Error
Amp
SC
–S
Load
SC
–S
Load
RD
Trim Down
Amp
1 kΩ
0.033 μF
1 kΩ
0.033 μF
–OUT
–OUT
1.23 V
1.23 V
1,000 (Vout –1.23) Vnom
1.23 (Vout – Vnom)
RU (ohms) =
– 1,000
1,000 Vout
Vnom – Vout
R
D (ohms) =
Figure 7 — Output voltage trim down circuit.
Figure 8 — Output voltage trim up circuit.
Trim Up
Trim Down
1. The converter is rated for a maximum delivered power. To
ensure that maximum rated power is not exceeded, reduce
maximum output current by the same percentage increase in
output voltage.
1. This converter is not a constant power device – it has a
constant current limit. Hence, available output power is
reduced by the same percentage that output voltage is
trimmed down. Do not exceed maximum rated output current.
2. The trim up resistor must be connected to the +Sense pin.
2. The trim down resistor must be connected to the –Sense pin.
3. Do not trim the converter above maximum trim range
(typically +10%) or the output over voltage protection
circuitry may be activated.
Trim resistor values calculated automatically:
On-line calculators for trim resistor values are available
on the vicor website at: vicorpower.com/tools.
Resistor values can be calculated for fixed trim up,
fixed trim down and for variable trim up or down.
In addition to trimming information, the web site and
the Applications Manual also include design tips,
applications circuits, EMC suggestions, thermal design
guidelines and PDF data sheets for all available Vicor
products.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 9 of 13
Set your site on VICOR at www.vicorpower.com
CONTROL FUNCTIONS - PR PIN
Parallel Operation
+IN
PC
The PR pin supports paralleling for increased power with N+1
(N+M) redundancy and phased array capability. Modules of
the same input voltage, output voltage, and power level will
current share if all PR pins are suitably interfaced.
Module 1
PR
–IN
Compatible interface architectures include the following:
+IN
PC
DC coupled single-wire interface. All PR pins are directly
connected to one another. This interface supports current
sharing but is not fault tolerant. Negative In pins must be tied
to the same electric potential. Up to three converters may be
paralleled by this method. See Figure 9.
Module 2
(up to 12)
PR
–IN
Ground plane
Figure 9 — DC coupled single-wire interface.
AC coupled single-wire interface. All PR pins are connected
to a single communication bus through 0.001 µF (500 V)
capacitors. This interface supports current sharing and is fault
tolerant except for the communication bus. Up to three
converters may be paralleled by this method. See Figure 10.
+IN
0.001μF
PC
Module 1
Transformer coupled interface. For paralleling four or more
converters a transformer coupled interface is required. For
details on this configuration please refer to the design guide
referenced in the following technical information section.
PR
–IN
+IN
0.001μF
PC
Module 2
(up to 12)
PR
Technical Information
–IN
For additional technical information contained in the Design
Guide and Applications Manual for Maxi, Mini, Micro Family
DC-DC Converters and Accessory Modules, click on the link
below:
Ground plane
Figure 10 — AC coupled single-wire interface.
http://www.vicorpower.com/mmmguide
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 10 of 13
Set your site on VICOR at www.vicorpower.com
CONTROL FUNCTIONS - PR PIN (CONT.)
+OUT
• The +Out and –Out power buses should be
+S
–S
+S
SC
–S
designed to minimize and balance parasitic
Module 1
Module 2
impedance from each module output to the load.
–OUT
+OUT
• The +Sense pins should be tied to the same
point on the +Out power bus; the –Sense pins
should be tied to the same point on the –Out
power bus.
+S
+OUT
+S
SC
–S
+S
–S
+S
SC
–S
Load
• At the discretion of the power system designer,
a subset of all modules within an array may be
configured as slaves by shorting SC to –S.
–OUT
–S
–OUT
+Sense from
other modules
in the array
+OUT
+S
SC
–S
• ORʼing diodes may be inserted in series with
the +Out pins of each module to provide
module output fault tolerance.
Module N+1
–OUT
Figure 11 — N+1 module array output connections.
Figure 12 — OR’ing diodes connections.
PIN STYLES*
Designator
(None)
Description
Short solder
Long solder
Short ModuMate
Long ModuMate
Short RoHS
Notes
Requires in-board, mounting
On-board mounting for 0.065" boards
SurfMate or in-board socket mounting
On-board socket mounting
Select for RoHS compliant in-board solder, socket, or SurfMate mounting
Select for RoHS compliant on-board solder or socket mounting
L
S
N
F
G
Long RoHS
*
Pin style designator follows the “B” after the output power and precedes the baseplate designator.
Ex. V24A12T400BN2 — Long ModuMate Pins
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 11 of 13
Set your site on VICOR at www.vicorpower.com
MECHANICAL DRAWINGS
0.50 0.02
12,7 0,5
Converter Pins
No. Function Label
1
2
+In
+
0.300 0.015
7,62 0,38
2.20
55,9
0.01
0.50
12,7
style 2 & 3
baseplates only
(4X)***
0.12* 0.20**
3,1 5,08
2.00
50,8
0.10
2,5
Primary
0.23
(REF)
5,8
1.74
44,2
PC
Control
0.15
3,81
CHAMFER
X 45°
3
4
5
6
Parallel
–In
–Out
PR
–
–
Pin C
L
0.38
9,6
1
2
3
4
(2X)
0.300 0.015
7,62 0,38
1.80
45,7
–Sense
–S
ALUMINUM
BASEPLATE
Secondary
FULL R (6X)
7
SC
3.60
91,4
Control
4.60
116,8
4.200
Pin C
L
106,68
0.13
3,3
8
9
+Sense
+Out
+S
+
(6X)
9
8
7
6
5
Use a
4-40 Screw (6x)
Torque to:
5 in-lbs
0.43
10,9
0.400
10,16
0.06
1,5
0.180
R
(3X)
DIA,(2X)
4,57
2.20
55,9
(REF)
0.57 N-m
0.700
17,78
1.000
25,40
1.400
35,56
0.080
0.54
(9X)
DIA,(7X)
2,03
Short Pin
Long Pin
13,7
Slotted
or
0.62
15,7
(9X)
Threaded
4-40 UNC-2B (6X)
*
Slotted baseplate only
or
** Threaded & thru-hole (style 2 & 3) baseplates
Thru Hole
#30 Drill Thru (6X)
(0.1285)
*** Reserved for Vicor accessories. Not for mounting
C
Center line
L
Figure 13 — Module outline
ALL MARKINGS
THIS SURFACE
ONBOARD
SOLDER
MOUNT
INBOARD
SOLDER
MOUNT
LONG PIN STYLE
SHORT PIN STYLE
0.062 0.010
PCB THICKNESS
0.094 0.003
2,39 0,08
0.094 0.003
2,39 0,08
(7X)
(2X)
1,57 0,25
PLATED
THRU HOLE
DIA
0.194 0.003
4,93 0,08
0.194 0.003
4,93 0,08
1.790**
45,47
0.06
R
(4X)
0.178
4,52
1,5
1
2
3
4
ALUMINUM
BASEPLATE
PINS STYLES
SOLDER:TIN/LEAD
HOT SOLDER DIPPED
MODUMATE: GOLD PLATED COPPER
RoHS: GOLD PLATED COPPER
4.200*
106,68
3.844**
97,64
Consult Vicor Application Note:
SOLDERING METHODS AND PROCEDURES FOR
VI-200/VI-J00 & MAXI, MINI AND MICRO MODULES
9
8
7
6
5
Unless otherwise specified,
dimensions are in inches
mm
0.400*
10,16
Decimals
0.XX
Tol.
Angles
0.01
0,25
0.005
0,127
0.43
10,9
0.53
13,5
0.700*
17,78
1.000*
25,40
1.400*
35,56
1°
0.003
0,08
* DENOTES TOL =
**PCB WINDOW
0.XXX
0.195
4,95
Figure 14 —PCB mounting specifications
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
Page 12 of 13
Set your site on VICOR at www.vicorpower.com
Warranty
Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal
use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or
maintenance. Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original
purchaser only.
EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE.
Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the
buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products
returned without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the
product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty.
Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability,
function, or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither
does it convey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of
its components in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor
Terms and Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and
indemnifies Vicor against all damages.
Vicor’s comprehensive line of power solutions includes high density AC-DC
and DC-DC modules and accessory components, fully configurable AC-DC
and DC-DC power supplies, and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its
use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or
malfunction could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available
upon request.
Specifications are subject to change without notice.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent
applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual
Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
24V Maxi Family
Rev. 3.8
11/07
Set your site on VICOR at www.vicorpower.com
相关型号:
©2020 ICPDF网 联系我们和版权申明