V375B24T300BS3 [VICOR]
DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, PACKAGE-9;型号: | V375B24T300BS3 |
厂家: | VICOR CORPORATION |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, PACKAGE-9 局域网 |
文件: | 总13页 (文件大小:830K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Mini Family
375 V Input
Actual size:
2.28 x 2.2 x 0.5 in
57,9 x 55,9 x 12,7 mm
S
®
C
NRTL US
C
US
DC-DC Converter Module
Features
Applications
• DC input range: 250 – 425 V
• Isolated ouput
Off-line systems with auto-ranging or PFC front ends, industrial and process control,
distributed power, medical, ATE, communications, defense, aerospace
• Input surge withstand: 500 V for 100 ms
• DC output: 2 – 48 V
For details on proper operation please refer to:
• Programmable output: 10 to 110%
• Regulation: 0.3% no load to full load
• Efficiency: Up to 89%
Design Guide & Applications Manual for Maxi, Mini, Micro Family.
•
•
Maximum operating temp: 100°C, full load
Power density: up to 120 W per cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture
Absolute Maximum Ratings
Parameter
Rating
-0.5 to +525
-0.5 to +7.0
-0.5 to +7.0
-0.5 to +1.5
1.0
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Notes
+In to –In voltage
PC to –In voltage
PR to –In voltage
SC to -Out voltage
-Sense to -Out voltage
• RoHS Compliant (with F or G pin option)
Product Overview
These DC-DC converter modules use
advanced power processing, control and
packaging technologies to provide the
performance, flexibility, reliability and cost
effectiveness of a mature power component.
High frequency ZCS/ZVS switching
provides high power density with low
noise and high efficiency.
Isolation voltage
in to out
3000
1500
500
Vrms
Vrms
Vrms
°C
°C
Test voltage
Test voltage
Test voltage
M-Grade
in to base
out to base
Operating Temperature
Storage Temperature
-55 to +100
-65 to +125
500 (260)
750 (390)
5 (0.57)
M-Grade
°F (°C)
°F (°C)
in-lbs (N-m)
<5 sec; wave solder
<7 sec; hand solder
6 each
Pin soldering temperature
Mounting torque
Part Numbering
e.g. V375B12T300BL2
V375B
B
Baseplate
Blank: Slotted
2: Threaded
Output Power
Pin Style
Finish
Tin/Lead
Tin/Lead
Product Grade Temperatures (°C)
Output Voltage
2 = 2 V
Vout
2 V
3.3 V
5 V
Pout
100 W
Blank: Short
Grade
Operating
Storage
L: Long
E
C
T
H
M
=
=
=
=
=
-
10 to +100
20 to +100
40 to +100
40 to +100
55 to +100
-
-
-
-
-
20 to +125
40 to +125
40 to +125
55 to +125
65 to +125
3V3 = 3.3 V
5 = 5 V
3: Through-hole
100 W, 150 W
150 W, 200 W
200 W
200 W, 300 W
200 W, 300 W
200 W, 300 W
200 W, 300 W
200 W, 300 W
200 W, 300 W
S: Short ModuMate Gold
-
-
-
-
N: Long ModuMate
F: Short RoHS
Gold
Gold
Gold
8 = 8 V
8 V
12 = 12 V
15 = 15 V
24 = 24 V
28 = 28 V
36 = 36 V
48 = 48 V
12 V
15 V
24 V
28 V
36 V
48 V
G: Long RoHS
375 V Mini Family
Page 1 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
MODULE FAMILY ELECTRICAL CHARACTERISTICS
Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature,
unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate.
ꢀOdUꢃꢄ ꢅNPUT ꢁPꢄcꢅFꢅcꢂTꢅONꢁ
Parameter
ꢀin
Typ
ꢀax
425
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
mA
Notes
Operating input voltage
Input surge withstand
Undervoltage turn-on
Undervoltage turn-off
Overvoltage turn-off/on
Disabled input current
250
375
500
<100 ms
242.5
212.2
446.3
247.5
204.7
429.2
467.5
1.1
PCꢀpin low
ꢀOdUꢃꢄ OUTPUT ꢁPꢄcꢅFꢅcꢂTꢅONꢁ
Parameter
ꢀin
Typ
ꢀax
1
Unit
% Vout nom.
%
Notes
Output voltage setpoint
Line regulation
Nominal input; full load; 25°C
Low line to high line; full load
Over operating temperature range
10 to 100% of full load
0.02
0.002
2
0.20
0.005
5
Temperature regulation
Power sharing accuracy
% / °C
%
Of nominal output voltage. For trimming below 90%
of nominal, a minimum load of 10% of maximum
rated power may be required.
Programming range
10
110
%
+Out to –Out, +ꢁense to –Out — ꢂbsolute ꢀaximum Ratings
2 V
-0.5 to 3.1
-0.5 to 4.7
-0.5 to 7.0
-0.5 to 10.9
-0.5 to 16.1
-0.5 to 20.0
-0.5 to 31.7
-0.5 to 36.9
-0.5 to 47.1
-0.5 to 62.9
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
3.3 V
5 V
8 V
12 V
15 V
24 V
28 V
36 V
48 V
Note: For important information relative to applications where the converter modules are subject to continuous dynamic loading,
contact Vicor applications engineering at 800-927-9474.
ThꢄRꢀꢂꢃ RꢄꢁꢅꢁTꢂNcꢄ ꢂNd cꢂPꢂcꢅTꢆ
Parameter
ꢀin
Typ
0.16
0.14
8.0
ꢀax
Unit
°C/Watt
°C/Watt
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20264)
Baseplate to ambient
°C/Watt
Baseplate to ambient; 1000 LFM
Thermal capacity
1.9
83
°C/Watt
Watt-sec/°C
375 V Mini Family
Page 2 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
MODULE FAMILY ELECTRICAL CHARACTERISTICS (CONT.)
ꢀOdUꢃꢄ cONTROꢃ ꢁPꢄcꢅFꢅcꢂTꢅONꢁ
Parameter
ꢀin
Typ
ꢀax
Unit
Notes
PRꢅꢀꢂRꢆ ꢁꢅdꢄ (PC = Primary Control; PR = Parallel)
PC bias voltage
current limit
5.50
1.5
5.75
2.1
6.00
3.0
Vdc
mA
PC current = 1.0 mA
PC voltage = 5.5 V
During normal operation
PC module disable
PC module enable delay
PC module alarm
2.3
2.6
4
2.9
7
Vdc
ms
Switch must be able to sink ≥4 mA. See Fig. 2
0.5
1.1
6.1
Vavg
MΩ
UV, OV, OT, module fault. See Figs. 3 and 5
See Fig. 3, converter off or fault mode
PR load >30 Ω, <30 pF
PC resistance
0.9
5.7
1.0
5.9
PR emitter amplitude
PR emitter current
PR receiver impedance
PR receiver threshold
PR drive capability
Volts
mA
150
375
2.4
500
2.5
625
2.6
12
Ω
25°C
Volts
modules
Minimum pulse width: 20 ns
Without PR buffer amplifier
ꢁꢄcONdꢂRꢆ ꢁꢅdꢄ (SC = Secondary Control)
SC bandgap voltage
SC resistance
1.21
990
1.23
1000
0.033
1.25
Vdc
Ω
Referenced to –Sense
1010
SC capacitance
µF
SC module alarm
0
Vdc
With open trim; referenced to –Sense. See Fig. 7
ꢀOdUꢃꢄ GꢄNꢄRꢂꢃ ꢁPꢄcꢅFꢅcꢂTꢅONꢁ
Parameter
ꢀin
Typ
ꢀax
Unit
Notes
Remote sense (total drop)
0.5
Vdc
0.25 V per leg (sense leads must be connected to
respective, output terminals)
Isolation test voltage (in to out)*
Isolation test voltage (in to base)*
Isolation test voltage (out to base)*
3000
1500
500
Vrms
Vrms
Vrms
Complies with reinforced insulation requirements
Complies with basic insulation requirements
Complies with operational insulation requirements
Isolation resistance
10
MΩ
in to out, in to baseplate, out to baseplate
3.1
3.5
3.9
ounces
(grams)
Weight (E, C, T grade)
(89.3)
(100.3)
(111.3)
3.5
3.9
4.3
ounces
(grams)
Weight (H, M grade)
(99.6)
(110.6)
(121.6)
Temperature limiting
Agency approvals
100
115
°C
See Figs. 3 and 5. Do not operate coverter >100C.
UL60950-1, EN60950-1, CSA60950-1, IEC60950-1.
With appropriate fuse in series with the +Input
cURus, cTÜVus, CE
* Isolation test voltage, 1 minute or less.
Note:
Specifications are subject to change without notice.
375 V Mini Family
Page 3 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
ꢀOdUꢃꢄ ꢁPꢄcꢅFꢅc OPꢄRꢂTꢅNGꢇꢁPꢄcꢅFꢅcꢂTꢅONꢁ
2 Vout, 100 W (e.g. V375B2c100Bꢃ)
Parameter
ꢀin
Typ
74.6
100
2.8
ꢀax
Unit
%
Notes
Efficiency
73.6
Nominal input; full load; 25°C
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
125
2.9
5.3
0.3
50
mV
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
2.7
Volts
Watts
%
5.1
0.02
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
51
35
57.5
57.5
70
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
70
3.3 Vout, 150 W (e.g. V375B3V3c150Bꢃ)
Parameter
ꢀin
Typ
79
ꢀax
Unit
%
Notes
Efficiency
77.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
100
4.3
125
4.46
7.7
mV
4.14
Volts
Watts
%
5.1
0.02
0.2
No load to full load; nominal input
0
45.45
63.7
63.7
Amps
Amps
Amps
Current limit
45.5
31.8
53.8
54.5
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
3.3 Vout, 100 W (e.g. V375B3V3c100Bꢃ)
Parameter
ꢀin
Typ
79.2
108
4.3
ꢀax
Unit
%
Notes
Efficiency
77.9
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
135
4.46
5.5
mV
4.14
Volts
Watts
%
3.8
0.02
0.2
No load to full load; nominal input
0
30.3
41
Amps
Amps
Amps
Current limit
30.9
17.4
34.8
34.8
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
41
5 Vout, 200 W (e.g. V375B5c200Bꢃ)
Parameter
ꢀin
Typ
83
ꢀax
Unit
%
Notes
Efficiency
82
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
110
6.25
5.4
138
6.47
8.1
0.2
40
mV
6.03
Volts
Watts
%
0.02
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
40.8
28
46
46
52
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
52
5 Vout, 150 W (e.g. V375B5c150Bꢃ)
Parameter
ꢀin
Typ
83.4
120
6.25
5.5
ꢀax
Unit
%
Notes
Efficiency
82
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
150
6.47
6.5
mV
6.03
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
30
Amps
Amps
Amps
Current limit
30.6
21
34.5
34.5
40.5
40.5
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
375 V Mini Family
Page 4 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
ꢀOdUꢃꢄ ꢁPꢄcꢅFꢅc OPꢄRꢂTꢅNGꢇꢁPꢄcꢅFꢅcꢂTꢅONꢁ (cONT.)
8 Vout, 200 W (e.g. V375B8c200Bꢃ)
Parameter
ꢀin
Typ
84.2
320
9.7
ꢀax
Unit
%
Notes
Efficiency
83
Nominal input; full load; 25°C
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
400
10.1
6.9
mV
p-p; Nominal input; full load; 20MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
9.36
Volts
Watts
%
6
0.02
0.2
No load to full load; nominal input
0
25
Amps
Amps
Amps
Current limit
25.5
17.5
28.8
28.8
33.8
33.8
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
12 Vout, 300 W (e.g. V375B12c300Bꢃ)
Parameter
ꢀin
Typ
86.6
280
14.3
6
ꢀax
Unit
%
Notes
Efficiency
84.3
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
360
14.9
9
mV
13.7
Volts
Watts
%
0.02
0.3
25
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
25.5
17.5
28.8
28.8
35
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
35
12 Vout, 200 W (e.g. V375B12c200Bꢃ)
Parameter
ꢀin
Typ
85.4
258
14.3
8.5
ꢀax
Unit
%
Notes
Efficiency
84
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
323
14.9
10
mV
13.7
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
16.67
22.6
22.6
Amps
Amps
Amps
Current limit
17
19.2
19.2
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
11.6
15 Vout, 300 W (e.g. V375B15c300Bꢃ)
Parameter
ꢀin
Typ
87.5
140
17.8
5.6
ꢀax
Unit
%
Notes
Efficiency
85
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
175
18.5
8.4
0.3
20
mV
17.1
Volts
Watts
%
0.02
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
20.4
14
23
23
26
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
26
15 Vout, 200 W (e.g. V375B15c200Bꢃ)
Parameter
ꢀin
Typ
87.7
222
17.8
7.7
ꢀax
Unit
%
Notes
Efficiency
86.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
278
18.5
9
mV
17.1
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
13.33
18
Amps
Amps
Amps
Current limit
13.5
9.31
15.3
15.3
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
18
375 V Mini Family
Page 5 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
ꢀOdUꢃꢄ ꢁPꢄcꢅFꢅc OPꢄRꢂTꢅNGꢇꢁPꢄcꢅFꢅcꢂTꢅONꢁ (cONT.)
24 Vout, 300 W (e.g. V375B24c300Bꢃ)
Parameter
ꢀin
Typ
88
ꢀax
Unit
%
Notes
Efficiency
86.5
Nominal input; full load; 25°C
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
494
28.1
4.5
618
29.1
6.8
mV
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
27.1
Volts
Watts
%
0.02
0.3
No load to full load; nominal input
0
12.5
16.9
17.8
Amps
Amps
Amps
Current limit
12.7
8.75
14.4
14.4
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
24 Vout, 200 W (e.g. V375B24c200Bꢃ)
Parameter
ꢀin
Typ
86.8
240
28.1
6.8
ꢀax
Unit
%
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
300
29.1
7.2
mV
27.1
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
8.33
11.3
11.3
Amps
Amps
Amps
Current limit
8.49
5.83
9.58
9.58
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
28 Vout, 300 W (e.g. V375B28c300Bꢃ)
Parameter
ꢀin
Typ
87.5
420
32.7
5.5
ꢀax
Unit
%
Notes
Efficiency
86.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
525
33.9
8.2
mV
31.5
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
10.71
14.1
14.1
Amps
Amps
Amps
Current limit
11
12.4
12.4
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
7.56
28 Vout, 200 W (e.g. V375B28c200Bꢃ)
Parameter
ꢀin
Typ
87.5
100
32.7
6.6
ꢀax
Unit
%
Notes
Efficiency
86.6
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
125
33.9
10.6
0.2
mV
31.5
Volts
Watts
%
0.02
No load to full load; nominal input
0
7.14
9.64
9.64
Amps
Amps
Amps
Current limit
7.28
4.99
8.21
8.21
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
36 Vout, 300 W (e.g. V375B36c300Bꢃ)
Parameter
ꢀin
Typ
86.9
280
41.9
6.9
ꢀax
Unit
%
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
350
43.4
12.1
0.2
mV
40.4
Volts
Watts
%
0.02
No load to full load; nominal input
0
8.33
11.3
11.3
Amps
Amps
Amps
Current limit
8.49
5.83
9.58
9.58
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
375 V Mini Family
Page 6 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
ꢀOdUꢃꢄ ꢁPꢄcꢅFꢅc OPꢄRꢂTꢅNGꢇꢁPꢄcꢅFꢅcꢂTꢅONꢁ (cONT.)
36 Vout, 200 W (e.g. V375B36c200Bꢃ)
Parameter
ꢀin
Typ
87.5
166
41.9
6.4
ꢀax
Unit
%
Notes
Efficiency
86.5
Nominal input; full load; 25°C
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
208
43.4
6.7
mV
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
40.4
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
5.55
7.51
7.51
Amps
Amps
Amps
Current limit
5.67
3.89
6.39
6.39
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
48 Vout, 300 W (e.g. V375B48c300Bꢃ)
Parameter
ꢀin
Typ
89
ꢀax
Unit
%
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
170
55.7
5.2
213
57.7
7.8
mV
53.7
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
6.25
8.13
8.13
Amps
Amps
Amps
Current limit
6.37
4.37
7.19
7.19
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
48 Vout, 200 W (e.g. V375B48c200Bꢃ)
Parameter
ꢀin
Typ
88.4
220
55.7
8.3
ꢀax
Unit
%
Notes
Efficiency
87
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
275
57.7
9.1
mV
53.7
Volts
Watts
%
0.02
0.2
No load to full load; nominal input
0
4.17
5.63
5.63
Amps
Amps
Amps
Current limit
4.25
2.91
4.8
4.8
Output voltage 95% of nominal
Output voltage <250 mV
Short circuit current
375 V Mini Family
Page 7 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
BASIC MODULE OPERATION
C2*
4.7nF
C4*
4.7nF
+IN
PC
PR
+OUT
+S
F1*
SC
C1*
0.2µF
–S
–IN
–OUT
C3*
4.7nF
C5*
4.7nF
For C1 – C5, keep leads and connections short.
Figure 1 — Basic module operation requires fusing, grounding, bypassing capacitors.
* See Maxi, Mini, Micro Design Guide.
Comprehensive Online Application Information
The Design Guide and Applications Manual includes:
• Application circuits
• Design requirements
• EMC considerations
• Current sharing in power arrays
• Thermal performance information
• Recommended soldering methods
• Accessory modules – filtering, rectification, front-ends
• Mounting options
...and more.
cꢃꢅcKꢇhꢄRꢄ TOꢇVꢅꢄW
dꢄꢁꢅGN GUꢅdꢄ
Also at vicorpower.com
• PowerBench online configurators
• Over 20 Application Notes
• Online calculators – thermal, trimming, hold-up
• PDF data sheets for ALL Vicor products
375 V Mini Family
Page 8 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
PRIMARY CONTROL - PC PIN
Module Enable/Disable
Module Alarm
The module may be disabled by pulling PC to 0 V (2.3 V
max) with respect to the –Input. This may be done with an
open collector transistor, relay, or optocoupler. Converters
may be disabled with a single transistor or relay either directly
or via “OR’ing” diodes for 2 or more converters. See Figure 2.
The module contains “watchdog” circuitry which monitors
input voltage, operating temperature and internal operating
parameters. In the event that any of these parameters are
outside of their allowable operating range, the module will
shut down and PC will go low. PC will periodically go high
and the module will check to see if the fault (as an example,
Input Undervoltage) has cleared. If the fault has not been
cleared, PC will go low again and the cycle will restart. The
SC pin will go low in the event of a fault and return to its nor-
mal state after the fault has been cleared. See Figures 3 and 5.
Primary Auxiliary Supply
During normal operation only, the PC Pin can source 5.7 V @
1.5 mA. In the example shown in Figure 4, PC powers a mod-
ule enabled LED.
Input Undervoltage
Input Overvoltage (See Note 1)
+OUT
+IN
PC
+In
PC
+Out
Overtemperature
Module Faults
Auto
Restart
SW1
+S
SC
–S
+S
SC
–S
2-20 ms typ.
50 Ω
f (V
IN
)
SW1, 2, & 3
shown in
"Fault" position
1 K
6 K
SW2
SW3
1 M
PR
Disable
PR
–In
5.7 Vdc
(0-3 mA)
–IN
1.23
Vdc
– OUT
–Out
Disable = PC <2.3V
1
Not applicable for 300 Vdc input family
Figure 2 — Module enable/disable.
Figure 3 — PC/SC module alarm logic.
+In
PC
+Out
Fault
PC
40 μs typ.
5.7 V
+S
SC
–S
4kΩ
"Module
PR
–In
Enabled"
1.23 V
2–20 ms typ.
SC
–Out
Figure 4 — LED on-state indicator.
Figure 5 — PC/SC module alarm timing.
Optocoupler
+In
PC
+In
PC
+Out
+Out
+S
SC
–S
+S
SC
–S
4 kΩ
Alarm
PR
–In
PR
–In
1.00V
–Out
–Out
Figure 6 — Isolated on-state indicator.
Figure 7 — Secondary side on-state indicator.
375 V Mini Family
Page 9 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
SECONDARY CONTROL - SC PIN
PARALLEL BUS - PR PIN
Output Voltage Programming
Parallel Operation
The output voltage of the converter can be adjusted or
programmed via fixed resistors, potentiometers or voltage
DACs. See Figure 8.
The PR pin supports paralleling for increased power with N+1
(N+M) redundancy. Modules of the same input voltage, output
voltage, and power level will current share if all PR pins are
suitably interfaced.
Compatible interface architectures include the following:
+OUT
+S
AC coupled single-wire interface. All PR pins are connected
to a single communication bus through 0.001 µF (500 V)
capacitors. This interface supports current sharing and is fault
tolerant except for the communication bus. Up to three
converters may be paralleled by this method. See Figure 9.
Error Amplifier
Ru
Trim Up
–
SC
+
Load
1 kΩ
Transformer coupled interface. For paralleling four or more
converters a transformer coupled interface is required. See
Figure 10.
Rd
Trim Down
0.033 uF
-S
1.23 V
100 Ω typ.
For details on parallel operation please refer to the
–OUT
Design Guide & Applications Manual for Maxi, Mini, Micro Family.
1,000 Vout
Vnom – Vout
Rd (ohms) =
RU (ohms) =
4.7 nF
+
–
+IN
PC
PR
–IN
0.2 µF
Z1*
1,000 (Vout –1.23) Vnom
1.23 (Vout – Vnom)
– 1,000
Module 1
Module 2
0.001 µF
Figure 8 — Output voltage trim down and trim up circuit.
4.7 nF
4.7 nF
0.2 µF
Low inductance
ground plane
or bus
Trim Down
+IN
PC
PR
–IN
1. This converter is not a constant power device – it has a
constant current limit. Hence, available output power is
reduced by the same percentage that output voltage is
trimmed down. Do not exceed maximum rated output current.
0.001 µF
Z1*
2. The trim down resistor must be connected between the SC
and -S pins. Do not bypass the SC pin directly with a
capacitor.
4.7 nF
Parallel
Bus
Figure 9 — AC coupled single-wire interface.
* See Maxi, Mini, Micro Design Guide.
Trim Up
1. The converter is rated for a maximum delivered power. To
ensure that maximum rated power is not exceeded, reduce
maximum output current by the same percentage increase in
output voltage.
4.7 nF
+
–
+IN
PC
PR
–IN
0.2 µF
Z1*
Module 1
Module 2
T1
2. The trim up resistor must be connected between the SC
and +S pins. Do not bypass the SC pin directly with a
capacitor.
4.7 nF
4.7 nF
3. Do not trim the converter above maximum trim range
(typically +10%) or the output over voltage protection
circuitry may be activated.
+IN
PC
PR
–IN
0.2 µF
Z1*
T2
Trim resistor values calculated automatically:
On-line calculators for trim resistor values are available on the
vicor website at:
asp.vicorpower.com/calculators/calculators.asp?calc=1
Resistor values can be calculated for fixed trim up, fixed trim
down and for variable trim up or down.
4.7 nF
Parallel
Bus
Figure 10 — Transformer-coupled interface.
375 V Mini Family
Page 10 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
PARALLEL BUS OUTPUT
•
•
The +Out and –Out power buses should be designed to
+OUT
+S
minimize and balance parasitic impedance from each
module output to the load.
SC
Module 1
The +Sense pins must be tied together to form a
+Sense bus. This must be Kelvin connected to +Out
at a single point. The –Sense pins should be tied
together to form a –Sense bus. This must be Kelvin
connected to –Out at a single point.
At the discretion of the power system designer,
a subset of all modules within an array may be
configured as slaves by connecting SC to –S.
OR’ing diodes may be inserted in series with the
+Out pins of each module to provide module
output fault tolerance.
The +Sense and -Sense leads should be routed in close
proximity to each other on the printed circuit board. If
wires are used to connect the converters on a PCB to
an external load, the Sense leads should be twisted
together to reduce noise pickup.
–S
–OUT
+S
–S
+OUT
+S
•
•
•
Load
Module 2
SC
–S
–OUT
+OUT
+S
SC
Module N+1
–S
–OUT
Figure 11 — N+1 module array output connections.
PꢅNꢇꢁTꢆꢃꢄꢁ*
designator
desꢈription
Short
Finisꢉ
Notes
(None)
Tin/Lead
Tin/Lead
Gold
Requires in-board, mounting
L
S
N
F
Long
On-board mounting for 0.065" boards
Short ModuMate
Long ModuMate
Short RoHS
Long RoHS
SurfMate or in-board socket mounting
Gold
On-board socket mounting
Gold
Select for RoHS compliant in-board solder, socket, or SurfMate mounting
Select for RoHS compliant on-board solder or socket mounti
G
Gold
*
Pin style designator follows the “B” after the output power and precedes the baseplate designator.
Ex. V375B12T200BN2 — Long ModuMate Pins
375 V Mini Family
Page 11 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
MECHANICAL DRAWINGS
converter Pins
No. Function Label
1
2
+In
+
Primary
PC
Control
3
4
5
6
Parallel
–In
PR
–
–Out
–
–Sense
–S
Secondary
7
SC
Control
8
9
+Sense
+Out
+S
+
Figure 12 — Module outline
ALL MARKINGS
THIS SURFACE
INBOARD
SOLDER
MOUNT
ONBOARD
SOLDER
MOUNT
SHORT PIN STYLE
0.094 0.003
LONG PIN STYLE
0.062 0.010
PCB THICKNESS
0.094 0.003
2,39 0,08
(7X)
1,57 0,25
2,39 0,08
PLATED
THROUGH HOLE
DIA
0.164 0.003
4,16 0,08
0.164 0.003
4,16 0,08
(2X)
1.790**
45,47
0.06
1,5
ALUMINUM
BASEPLATE
R
(4X)
0.158
4,01
PINS STYLES
SOLDER:TIN / LEAD PLATED
MODUMATE: GOLD PLATED COPPER
RoHS: GOLD PLATED COPPER
1
2
3
4
1.575**
40,00
1.900*
48.,26
FORꢀSOLDERING METHODS AND PROCEDURES
PLEASE REFERꢀTOꢀTHEꢀMAXI, MINI, MICRO
DESIGN GUIDE.
9
8
7
6
5
0.400*
10,16
0
0.45
11,5
0.53
13,5
Unless otherwise specified,
dimensions are in inches
mm
0.700*
17,78
deꢈimals
0.XX
Tol.
ꢂngles
1.000*
25,40
1.400*
35,56
0.01
0.25
0.005
0.127
0.003
0,08
* DENOTES TOL =
** PCB WINDOW
0.195
4,95
1°
0.XXX
Figure 13 —PCB mounting specifications
375 V Mini Family
Page 12 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
375 V Input
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and
accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom
power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor makes no
representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves the right to make
changes to any products, specifications, and product descriptions at any time without notice. Information published by Vicor has been checked and
is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies. Testing and other quality controls are
used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
Specifications are subject to change without notice.
Vicor’s Standard Terms and Conditions
All sales are subject to Vicor’s Standard Terms and Conditions of Sale, which are available on Vicor’s webpage or upon request.
Product Warranty
In Vicor’s standard terms and conditions of sale, Vicor warrants that its products are free from non-conformity to its Standard Specifications (the
“Express Limited Warranty”). This warranty is extended only to the original Buyer for the period expiring two (2) years after the date of shipment
and is not transferable.
UNLESS OTHERWISE EXPRESSLY STATED IN A WRITTEN SALES AGREEMENT SIGNED BY A DULY AUTHORIZED VICOR SIGNATORY, VICOR DISCLAIMS
ALL REPRESENTATIONS, LIABILITIES, AND WARRANTIES OF ANY KIND (WHETHER ARISING BY IMPLICATION OR BY OPERATION OF LAW) WITH
RESPECT TO THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR
PARTICULAR PURPOSE, INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT, OR ANY OTHER MATTER.
This warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. Vicor shall not be liable
for collateral or consequential damage. Vicor disclaims any and all liability arising out of the application or use of any product or circuit and assumes
no liability for applications assistance or buyer product design. Buyers are responsible for their products and applications using Vicor products and
components. Prior to using or distributing any products that include Vicor components, buyers should provide adequate design, testing and operat-
ing safeguards.
Vicor will repair or replace defective products in accordance with its own best judgment. For service under this warranty, the buyer must contact
Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be
returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the
product was defective within the terms of this warranty.
Life Support Policy
VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS
PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used herein, life support
devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform
when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the
user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms and Conditions of Sale, the user of Vicor products
and components in life support applications assumes all risks of such use and indemnifies Vicor against all liability and damages.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the prod-
ucts described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property rights is
granted by this document. Interested parties should contact Vicor's Intellectual Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
375 V Mini Family
Page 13 of 13
Rev 8.7
vicorpower.com
800 927.9474
3/2014
相关型号:
©2020 ICPDF网 联系我们和版权申明