VE-J00-EW-S [VICOR]
DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid,;
| 型号： | VE-J00-EW-S |
| 厂家： | 
VICOR CORPORATION |
| 描述： | DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid, |
| 文件： | 总5页 (文件大小：115K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data Sheet
VI-J00, VE-J00
Half Brick DC-DC Converters
25 to 100 Watts
Features
• RoHS compliant (VE versions)
• Up to 50 Watts per cubic inch
• cULus, cTÜVus
• CE Marked
• Up to 90% efficiency
• Size: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7)
• Remote sense and current limit
• Logic disable
• Wide range output adjust
• ZCS power architecture
• Low noise FM control
Converter Selection Chart
[a]
V I -J
[a]E for RoHS compliant
Product Highlights
Input Voltage
The VI-J00 MiniMod family established a new
standard in component-level DC-DC converters.
This “junior” size complement to the higher
power VI-200 family offers up to 100W of
isolated and regulated power in a board mounted
package. With thousands of input/output/power
combinations, and with a maximum operating
temperature rating of 100˚C, the MiniMod
provides nearly unlimited flexibiliy for power
system designers to meet demanding time to
market requirements.
[b]
[c]
Input Range
Low Line
Nominal
Max Power
Transient
Full Power
75% Max Power
0 = 12 V
V = 24 V
1 = 24 V
10 – 20 V
10 – 36 V
21 – 32 V
18 – 36 V
21 – 56 V
42 – 60 V
(5)
(1)
(2)
(2)
(6)
(3)
(2)
(2)
(2)
(2)
(3)
(6)
n/a
n/a
18 V
n/a
18 V
36 V
n/a
45 V
n/a
22 V
n/a
36 V
n/a
60 V
72 V
n/a
110 V
n/a
W = 24 V
2 = 36 V
3 = 48 V
N = 48 V
4 = 72 V
36 – 76 V
55 – 100 V
66 – 160 V
100 – 200 V
200 – 400 V
100 – 375 V
T = 110 V
5 = 150 V
6 = 300 V
7 = 150/300 V
Utilizing Vicor’s “zero-current-switching”
forward converter technology, proven by an
installed base of over 8 million units, the
MiniMod family combines state of the art power
density with the efficiency, low noise and
reliability required by next generation power
systems.
85 V
170 V
90 V
215 V
425 V
n/a
[b]
Maximum
5 V
>5 V
<5 V
Power
(1)
(2)
(3)
(4)
Outputs
Outputs
50 W
Outputs
10 A
50 W
75 W
100 W
75 W
50 W
50 W
100 W
100 W
75 W
75 W
75 W
20 A
20 A
15 A
15 A
Packaging Options
(5)
(6)
SlimMods™, high power density, flangeless
devices and FinMods™, featuring integral
finned heatsinks.
10 A
[c]
Transient voltage for 1 second.
SlimMod: Option suffix: - S
Example: VI - JXX - XX - S
FinMod: Option suffix: - F1 and - F2
Examples:
VI - JXX - XX -F1, 0.75" height
VI - JXX - XX -F2, 1.00" height
BusMod: Option suffix: -B1
MegaMod: VI - LJXX - XX
Output Voltage
Product Grade Temperature (°C)
Operating
Storage
Z = 2 V
2 = 15 V
E = –10 to +100
C = –25 to +100
I = –40 to +100
M = –55 to +100
E = –20 to +105
C = –40 to +105
I = –55 to +105
M = –65 to +105
N = 18.5 V
3 = 24 V
L = 28 V
J = 36 V
K = 40 V
4 = 48 V
H = 52 V
F = 72 V
D = 85 V
B = 95 V
Y = 3.3 V
0 = 5 V
X = 5.2 V
W = 5.5 V
V = 5.8 V
T = 6.5 V
R = 7.5 V
M = 10 V
1 = 12 V
P = 13.8 V
Output Power/Current Vout
≥ 5 V
< 5V
Z = 25 W
Y = 50 W
X = 75 W
W = 100 W
Z = 5 A
Y = 10 A
X = 15 A
W = 20 A
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 1.8
Page 1 of 5
Set your site on VICOR at www.vicorpower.com
CONVERTER SPECIFICATIONS
(typical at T = 25°C, nominal line and 75% load, unless otherwise specified)
BP
INPUT SPECIFICATIONS
VI-J00 E-Grade
Typ
VI-J00 C-, I-, M-Grade
Parameter
Min
Max
Min
Typ
Max
Units
Test Conditions
Inrush charge
60x10-6
60x10-6
100x10-6
Coulombs Nominal line
Input reflected
ripple current – pp
10%
10%
IIN
dB
dB
Nominal line, full load
Vin
Vout
Vin
120 Hz, nominal line
2400 Hz, nominal line
25+20Log
30+20Log
(
)
(
(
)
)
Vout
Input ripple rejection
Vin
Vout
20+20Log
1.35
No load power dissipation
1.35
2
2
Watts
OUTPUT CHARACTERISTICS
VI-J00 E-Grade
Typ
VI-J00 C-, I-, M-Grade
Parameter
Setpoint accuracy
Min
Max
2%
Min
Typ
0.5%
0.05%
0.2%
0.01
Max
1%
Units
VNOM
Test Conditions
1%
0.5%
1%
0.2%
0.5%
0.02
VNOM
LL to HL, 10% to Full Load
LL to HL, No Load to 10%
Over rated temperature
Load/line regulation
VNOM
Output temperature drift
0.02
0.02
% / °C
Long term drift
0.02
%/1K hours
Output ripple – pp:
2 V, 3.3 V
200
5%
3%
100
2%
150
3%
mV
20 MHz bandwidth
20 MHz bandwidth
20 MHz bandwidth
5 V
VNOM
VNOM
10 – 48 V
0.75%
1.5%
Trim range[a]
50%
0.5
110%
50%
0.5
110%
VNOM
Total remote
sense compensation
Volts
0.25 V max. neg. leg
Current limit
105%
105%
135%
140%
105%
105%
125%
130%
INOM
Automatic restart
Short circuit current
INOM
[a]
10 V, 12 V, 15 V outputs, and V input range (10 – 36 V) standard trim range 10%. Consult factory for wider trim range.
95 V output –50 + 0% trim range.
CONTROL PIN SPECIFICATIONS
VI-J00 E-Grade
Typ
VI-J00 C-, I-, M-Grade
Parameter
Min
Max
Min
Typ
50
Max
Units
Ohms
Ohms
Volts
Volts
mA
Test Conditions
Gate out impedance
Gate in impedance
Gate in high threshold
Gate in low threshold
Gate in low current
50
1000
6
1000
6
6
Use open collector
0.65
0.65
6
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 1.8
Page 2 of 5
Set your site on VICOR at www.vicorpower.com
CONVERTER SPECIFICATIONS
(typical at T = 25°C, nominal line and 75% load, unless otherwise specified)
BP
DIELECTRIC WITHSTAND CHARACTERISTICS
VI-J00 E-Grade
Typ
VI-J00 C-, I-, M-Grade
Typ Max
Parameter
Min
3,000
500
Max
Min
3,000
500
Units
VRMS
VRMS
VRMS
Test Conditions
Baseplate earthed
Input to output
Output to baseplate
Input to baseplate
1,500
1,500
THERMAL CHARACTERISTICS
VI-J00 E-Grade
VI-J00 C-, I-, M-Grade
Parameter
Efficiency
Min
Typ
78 – 88%
0.14
Max
Max
Min
Typ
80 – 90%
0.14
Max
Units
Test Conditions
Baseplate to sink
°C/Watt
With Vicor P/N 20267
MECHANICAL SPECIFICATIONS
VI-J00 E-Grade
Typ
VI-J00 C-, I-, M-Grade
Parameter
Min
Min
Typ
Max
Units
Test Conditions
3.1
90
3.2
92
3.3
94
3.5
101
3.7
107
3.8
109
Ounces
Grams
Weight
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 1.8
Page 3 of 5
Set your site on VICOR at www.vicorpower.com
MECHANICAL DRAWING
2.28
(57,9)
Standard
RoHS
1.30
(33,0)
.49
(12,4)
0.080 Dia (2) places
Solder plate
0.080 Dia (2) places
Matte tin over copper
alloy
.65
(16,5)
over copper alloy
.30 .015
(7,6) (0,38)
Pin #
Function
+In
1
2
3
4
5
6
7
8
4
3
9
Gate In
Gate Out
-In
8
7
6
2.10
(53,4)
1.40
VI-J00
(35,6)
1.00
+Out
.70
(17,8)
(25,4)
2
1
.40
(10,2)
+Sense
Trim
5
.35 .015
(8,9) (0,38)
–Sense
–Out
9
RoHS
Standard
FULL R
.15
(3,8)
0.040 (1,0) Dia (7) places
Solder plate
0.040 Dia (7) places
Matte tin over copper
alloy
.15
(3,8)
over copper alloy
2.40
(61,0)
Product ID
this surface
1.90
(48,3)
1.75
(44,4) Max.
.30
(7,6) Min.
.22
(5,6) Min.
+.030 (0,76)
-.000 (0)
.50
(12,7)
.01
.12
(3,0)
Aluminum Base
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 1.8
Page 4 of 5
Set your site on VICOR at www.vicorpower.com
Warranty
Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal
use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or
maintenance. Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original
purchaser only.
EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the
buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned
without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the
product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty.
Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed
for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability, function,
or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it con-
vey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of its compo-
nents in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor Terms and
Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and indemnifies Vicor
against all damages.
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC
modules and accessory components, fully configurable AC-DC and DC-DC power supplies,
and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its
use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or
malfunction could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available
upon request.
Specifications are subject to change without notice.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent
applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual
Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
VI-J00 MiniMod DC-DC Converters 25 to 100 Watts
Rev. 1.8
7/08
Set your site on VICOR at www.vicorpower.com
相关型号：
VE-J00-EY-F4
DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, MODULE-9
VICOR
©2020 ICPDF网 联系我们和版权申明