首页 > VE-JT4-CX

VE-JT4-CX

更新时间：2024-10-29 15:20:29

品牌：VICOR

描述：DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid,

PDF下载

中文翻译

PCB计价

概述
规格参数
数据手册

如果您发现信息不准确，欢迎纠错

VE-JT4-CX 概述

DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid, 电源模块

VE-JT4-CX 规格参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	包装说明：	,
Reach Compliance Code：	compliant	ECCN代码：	EAR99
风险等级：	5.75	模拟集成电路 - 其他类型：	DC-DC REGULATED POWER SUPPLY MODULE
最大输入电压：	160 V	最小输入电压：	66 V
标称输入电压：	110 V	JESD-30 代码：	R-XDMA-P9
JESD-609代码：	e3	最大负载调整率：	0.2%
功能数量：	1	输出次数：	1
端子数量：	9	最高工作温度：	100 °C
最低工作温度：	-25 °C	最大输出电压：	52.8 V
最小输出电压：	24 V	标称输出电压：	48 V
封装主体材料：	UNSPECIFIED	封装形状：	RECTANGULAR
封装形式：	MICROELECTRONIC ASSEMBLY	峰值回流温度（摄氏度）：	NOT SPECIFIED
认证状态：	Not Qualified	表面贴装：	NO
技术：	HYBRID	温度等级：	OTHER
端子面层：	Matte Tin (Sn)	端子形式：	PIN/PEG
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
最大总功率输出：	75 W	微调/可调输出：	YES
Base Number Matches：	1

VE-JT4-CX 数据手册

通过下载VE-JT4-CX数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

Half Brick, DC-DC Converters

VI-J00

VE-J00

NRTL US

25 to 100 Watts

Features & Beneﬁts

Product Highlights

• Isolated output

• Up to 50W/in³

• cURus, cTÜVus

• CE Marked

The VI-J00 MiniMod family established a new standard in component-level DC-DC

converters. This “junior” size complement to the higher power VI-200 family offers up

to 100W of isolated and regulated power in a board mounted package. With thousands

of input/output/power combinations, and with a maximum operating temperature

rating of 100°C, the MiniMod provides nearly unlimited ﬂexibiliy for power system

designers to meet demanding time to market requirements.

• Up to 90% efﬁciency

Utilizing Vicor’s “zero-current-switching” forward converter technology, proven

by an installed base of over 8 million units, the MiniMod family combines state of

the art power density with the efﬁciency, low noise and reliability required by next

generation power systems.

• Size: 2.28” x 2.4” x 0.5”

(57,9 x 61,0 x 12,7mm)

• Remote sense and current limit

• Logic disable

• Wide range output adjust

• ZCS power architecture

• Low noise FM control

• RoHS compliant (VE verisons)

Part Numbering

—

Family

Series

Input

Output

M = 10V

1 = 12V

Grade

Power

VI=Non-RoHS

VE = RoHS

J = J00

0= 12V

V= 24V

1= 24V

W= 24V

2= 36V

3= 48V

N =48V

4 = 72V

Z = 2V

K = 40V

4 = 48V

E = –10 to 100°C

≥ 5V

< 5V

Y = 3.3V

0 = 5V

C = –25 to 100°C W = 100W

I = –40 to 100°C X = 75W

M = –55 to 100°C Y = 50W

Z = 25W

W = 20A

X = 15A

Y = 10A

Z = 5A

T = 110V

5 = 150V

6 = 300V

P = 13.8V H = 52V

2 = 15V F = 72V

N = 18.5V D = 85V

X = 5.2V

W = 5.5V

V = 5.8V

T = 6.5V

R = 7.5V

Note: For additional

packaging options,

please see page 5.

7 = 150/300V

3 = 24V

L = 28V

J = 36V

B = 95V

VI-J00 DC-DC Converters

Page 1 of 7

Rev 3.0

06/2017

VI-J00, VE-J00

Maximum Power Available for VI-Jxx-xx

Input

Output

V_OUTDesignators

Low

Line

75%

Max

Voltage

Nom. (Range)

Transient^[a]

Power

12 (10 – 20)

24 (10 – 36)

n/a

-- -- -- --

24 (21 – 32)

24 (18 – 36)

n/a

36 (21 – 56)

-- -- --

48 (42 – 60)

48 (36 – 76)

n/a

110

n/a

215

n/a

425

72 (55 – 100)

110 (66 – 160)

150 (100 – 200)

150 (100 – 375)

300 (200 – 400)

n/a

-- --

n/a

170

-- -- --

^[a]Transient voltage for 1 second.

Converter Speciﬁcations

(Typical at T_BP= 25°C, nominal line and 75% load, unless otherwise speciﬁed.)

Input Speciﬁcations

VI-J00 E-Grade

VI-J00 C-, I-, M-Grade

Test

Conditions

Parameter

Min

Typ

60 x 10^-6

10%

Max

Min

Typ

60 x 10^-6

10%

Max

Units

Inrush charge

100 x 10^-6

Coulombs

I_IN

Nominal line

Input reﬂected

ripple current – pp

Nominal line,

full load

V_IN

120Hz,

nominal line

25+20 Log

30+20 Log

(_V)

OUT

(_V)

OUT

Input ripple

rejection

V_IN

2400Hz,

nominal line

20+20 Log

(_V)

OUT

No load power

dissipation

1.35

Watts

VI-J00 DC-DC Converters

Page 2 of 7

Rev 3.0

06/2017

VI-J00, VE-J00

Converter Speciﬁcations (Cont.)

(Typical at T_BP= 25°C, nominal line and 75% load, unless otherwise speciﬁed.)

Output Characteristics

VI-J00 E-Grade

VI-J00 C-, I-, M-Grade

Test

Units

Parameter

Min

Typ

Max

Min

Typ

Max

Conditions

Setpoint accuracy

0.5%

0.05%

V_NOM

Load/line

regulation

LL to HL, 10%

V_NOM

0.5%

0.2%

to Full Load

Load/line

regulation

LL to HL, No

V_NOM

0.2%

0.5%

0.02

Load to 10%

Output

temperature drift

Over rated

0.02

0.01

0.02

% / °C

temp.

Long term drift

Output ripple – pp:

2V, 3.3V

%/1K hours

20MHz

200

100

150

bandwidth

20MHz

bandwidth

V_NOM

20MHz

bandwidth

10 – 95V

0.75%

1.5%

V_NOM

Trim range^[a]

50%

0.5

110%

50%

0.5

110%

Total

0.25V max.

neg. leg

remote sense

compensation

Volts

Automatic

restart

Current limit

105%

135%

140%

105%

125%

130%

I_{FULL LOAD}

Short circuit

current

Automatic

restart

^[a]10V to 15V outputs, or “V” input range have standard trim range 10%. Consult factory for wider trim range.

95V output –50 + 0% trim range.

Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information,

please refer to output connections on page 5.

Control Pin Speciﬁcations

VI-J00 E-Grade

Typ

VI-J00 C-, I-, M-Grade

Typ

Test

Conditions

Parameter

Min

Max

Min

Max

Units

Gate out

impedance

1000

Ohms

Volts

Gate in impedance

1000

Gate in high

threshold

Use open

collector

Gate in low

threshold

0.65

Volts

Gate in low

current

VI-J00 DC-DC Converters

Page 3 of 7

Rev 3.0

06/2017

VI-J00, VE-J00

Converter Speciﬁcations (Cont.)

(Typical at T_BP= 25°C, nominal line and 75% load, unless otherwise speciﬁed.)

Dielectric Withstand Characteristics

VI-J00 E-Grade

VI-J00 C-, I-, M-Grade

Typ

Test

Units

Parameter

Min

Typ

Max

Min

Max

Conditions

Baseplate

earthed

Input to output

3,000

V_RMS

Output to

baseplate

500

V_RMS

Input to baseplate

1,500

Thermal Characteristics

VI-J00 E-Grade

Typ

VI-J00 C-, I-, M-Grade

Test

Units

Parameter

Efﬁciency

Min

Max

Min

Typ

80 – 90%

0.14

Max

Conditions

78 – 88%

0.14

With Vicor

°C/Watt

Baseplate to sink

P/N 20267

[d]

No overtemp protection in booster modules.

Mechanical Speciﬁcations

VI-J00 E-Grade

VI-J00 C-, I-, M-Grade

Typ

Test

Units

Parameter

Min

Typ

Max

Min

Max

Conditions

2.9

(82.8)

3.2

(92)

3.6

(101.2)

3.4

(96.3)

3.8

(107)

4.1

(117.7)

Ounces

(Grams)

Weight

Product Grade Temperatures

Parameter

Storage

Operating

-10 to + 100

-25 to + 100

-40 to + 100

-55 to + 100

Units

Notes

-20 to +105

-40 to +105

-55 to +105

-65 to +105

°C

Maximum Capacitance, Rated Output Voltage <5V

Rated V_OUT(V)

2 to <3

I_OUTRating (A)

C_MAX(µF)

1500

I_OUTRating (A)

>10 to 20

C_MAX(µF)

5000

≤10

3 to <5

1000

>10 to 20

5000

Maximum Capacitance, Rated Output Voltage ≥5V

Rated V_OUT(V)

5 to <7.5

7.5 to <10

10 to <28

>28

P_OUTRating (W)

C_MAX(µF)

1000

400

P_OUTRating (W)

>50 to 100

C_MAX(µF)

1500

700

≤50

>50 to 100

400

>50 to 100

500

150

>50 to 100

250

VI-J00 DC-DC Converters

Page 4 of 7

Rev 3.0

06/2017

VI-J00, VE-J00

Basic Module Operation

C2a

C2b

C1a

C1b

+IN

–IN

_Ze_S_r_w_o_it_C_c_u_h_r_in_re_g_nt+OUT

Converter

–OUT

400

C3 (µF) =

V_INMinimum

Figure 1 — Basic module operation requires fusing, grounding, bypassing capacitors.* See Design Guide & Applications Manual.

Output Connections and Considerations

The permissible load current^[e]must never be exceeded during

normal, abnormal or test conditions. Converters subject to

dynamic loading exceeding 25% of rated current must be

Storage

Vicor products, when not installed in customer units, should

be stored in ESD safe packaging in accordance with

ANSI/ESD S20.20, “Protection of Electrical and Electronic

reviewed by Vicor Applications Engineering to ensure that the

Parts, Assemblies and Equipment” and should be maintained

converter will operate properly.

in a temperature controlled factory/warehouse environment

Under dynamic load, light load, or no load conditions, the

converter may emit audible noise. Converters that utilize remote

sense may require compensation circuitry to offset the phase

lag caused by the external output leads and load impedance.

Remote Sense leads must be protected for conditions such as

lead reversal, noise pickup, open circuit, or excessive output lead

resistance between the sense point and the converters output

terminals. For applications that may draw more than the rated

current, a fast acting electronic circuit breaker must be utilized

to protect the converter. Under no circumstance should the

rated current be exceeded. Utilizing or testing of current limit or

short circuit current will damage the converter. Ensure that the

total output capacitance connected to the converter does not

exceed the limits on Page 4.

not exposed to outside elements controlled between the

temperature ranges of 15ºC and 38ºC. Humidity shall not be

condensing, no minimum humidity when stored in an ESD

compliant package.

Nominal Power Rating

^[e]Permissible load current:

Nominal V_OUT

VI-J00 DC-DC Converters

Page 5 of 7

Rev 3.0

06/2017

VI-J00, VE-J00

Mechanical Drawing

2.28

(57,9)

Standard

RoHS

1.30

.49

0.080 Dia (2) places

Matte tin over copper

alloy

(33,0)

(12,4)

.65

Solder plate

(16,5)

over copper alloy

.30±.015

(7,6)±(0,38)

Pin #

Function

+In

Gate In

Gate Out

-In

+Out

+Sense

Trim

–Sense

–Out

2.10

1.40

VI-J00

(53,4)

(35,6)

1.00

.70

(17,8)

(25,4)

.40

(10,2)

.35± .015

(8,9)±(0,38)

Standard

RoHS

FULL R

.15

0.040 (1,0) Dia (7) places

Solder plate

0.040 Dia (7) places

Matte tin over copper

alloy

(3,8)

.15

(3,8)

over copper alloy

2.40

Product ID

this surface

(61,0)

1.90

(48,3)

1.75

(44,4) Max.

.30

(7,6) Min.

.22

(5,6) Min.

+.030 (0,76)

.50

-.000 (0)

(12,7)

.01

.12

(3,0)

Aluminum Base

PACKAGING OPTIONS

Flangeless package

MegaMod Jr.

with integral heat sink

Chassis mount alternatives, one, two

or three outputs: up to 300W

Longitudinal, 0.25”(6.35mm) ﬁns — add sufﬁx “–F1”

Longitudinal, 0.50”(12.7mm) ﬁns — add sufﬁx “–F2”

2.28”L x 1.80”W x 0.50”H

(57,9 x 45,7 x 12,7mm)

1 up – 2.58¨ x 2.5¨ x 0.62¨ (65,5 x 63,5 x 15,7mm)

2 up – 2.58¨ x 4.9¨ x 0.62¨ (65,5 x 124,5 x 15,7mm)

3 up – 2.58¨ x 7.3¨ x 0.62¨ (65,5 x 185,4 x 15,7mm)

To order the SlimMod conﬁguration add the sufﬁx “–S” to

the standard module part number.

BusMod

Qty (2) grounding clips are included with each SlimMod

P/N 32187

Transverse, 0.25”(6.35mm) ﬁns — add sufﬁx “–F3”

Transverse, 0.50”(12.7mm) ﬁns — add sufﬁx “–F4”

2.28”L x 2.40”W x 1.08”H

(57,9 x 61,0 x 27,4mm)

Available with longitudinal or transverse ﬁns of

0.25”(6.35mm) or 0.50”(12.7mm) height. Add the

appropriate sufﬁx to the module part number.

To order the BusMod fully assembled, add sufﬁx “–B1” to

the standard module part number.

To order the BusMod separately:

Half-sized BusMod — P/N 18952

Qty (4) grounding clips are included with each FinMod

F1, F2 P/N 32185

F3, F4 P/N 32186

See BusMod Mechanical Drawings for more details.

VI-J00 DC-DC Converters

Page 6 of 7

Rev 3.0

06/2017

VI-J00, VE-J00

Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and

accessory components, fully conﬁgurable AC-DC and DC-DC power supplies, and complete custom

power systems.

Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor

makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves

the right to make changes to any products, speciﬁcations, and product descriptions at any time without notice. Information published by

Vicor has been checked and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies.

Testing and other quality controls are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where

mandated by government requirements, testing of all parameters of each product is not necessarily performed.

Speciﬁcations are subject to change without notice.

Visit http://www.vicorpower.com/vi-200_vi-j00 for the latest product information.

Vicor’s Standard Terms and Conditions and Product Warranty

All sales are subject to Vicor’s Standard Terms and Conditions of Sale, and Product Warranty which are available on Vicor’s webpage

(http://www.vicorpower.com/termsconditionswarranty) or upon request.

Life Support Policy

VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE

EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used

herein, life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and

whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to

result in a signiﬁcant injury to the user. A critical component is any component in a life support device or system whose failure to perform

can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms

and Conditions of Sale, the user of Vicor products and components in life support applications assumes all risks of such use and indemniﬁes

Vicor against all liability and damages.

Intellectual Property Notice

Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the

products described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property

rights is granted by this document. Interested parties should contact Vicor’s Intellectual Property Department.

Vicor Corporation

25 Frontage Road

Andover, MA, USA 01810

Tel: 800-735-6200

Fax: 978-475-6715

www.vicorpower.com

Customer Service: custserv@vicorpower.com

Technical Support: apps@vicorpower.com

All other trademarks, product names, logos and brands are property of their respective owners.

VI-J00 DC-DC Converters

Page 7 of 7

Rev 3.0

06/2017

VE-JT4-CX 相关器件

型号	制造商	描述	价格	文档
VE-JT4-CX-B1	VICOR	CONVERTER MOD DC/DC 48V 75W	获取价格
VE-JT4-CX-F1	VICOR	DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid,	获取价格
VE-JT4-CX-F2	VICOR	CONVERTER MOD DC/DC 48V 75W	获取价格
VE-JT4-CX-F3	VICOR	CONVERTER MOD DC/DC 48V 75W	获取价格
VE-JT4-CX-F4	VICOR	CONVERTER MOD DC/DC 48V 75W	获取价格
VE-JT4-CX-S	VICOR	DC DC CONVERTER 48V 75W	获取价格
VE-JT4-CY	VICOR	DC DC CONVERTER 48V 50W	获取价格
VE-JT4-CY-B1	VICOR	CONVERTER MOD DC/DC 48V 50W	获取价格
VE-JT4-CY-F1	VICOR	CONVERTER MOD DC/DC 48V 50W	获取价格
VE-JT4-CY-F2	VICOR	CONVERTER MOD DC/DC 48V 50W	获取价格