VI-263-MU-BM-S [VICOR]
DC-DC Current Source Module, 1 Output, 200W, Hybrid,;
| 型号： | VI-263-MU-BM-S |
| 厂家： | 
VICOR CORPORATION |
| 描述： | DC-DC Current Source Module, 1 Output, 200W, Hybrid, 局域网 输出元件 |
| 文件： | 总3页 (文件大小：234K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data Sheet
BatModTM
Battery Charger Current Source Modules
Features
• RoHS compliant (VE versions)
• Programmable output current
• Booster versions available
• Size: 4.6" x 2.4" x 0.5"
(116,8 x 61,0 x 12,7 mm)
• UL, CSA, TÜV
• Compatible with all major battery types
• Inputs: 48, 150, 300 Vdc
• Outputs: 12, 24, 48 Vdc Nominal
• Analog current monitor
• Analog overvoltage adjust
• CE Marked
Product Highlights
The BatMod combines Vicor’s industry standard
package with the flexibility of a power converter
whose output voltage and output current may be
independently set. BatMod’s allow the user to
independently program a constant output current
and a maximum float voltage. The float voltage is
the point at which the BatMod transitions from
constant current to constant voltage. These
features make the BatMod an ideal candidate for
battery charging and other applications which
require a controlled current source.
Specifications
(typical T = 25°C, nominal line, 75% load, unless otherwise specified)
BP
Parameter
Rating
48 Vdc, 150 Vdc,
300 Vdc
Notes
42 – 60 V, 100 – 200 V,
200 – 400 V
Nominal input voltage
0 – 14.5 A
0 – 7.25 A
0 – 3.6 A
12 V battery system
24 V battery system
48 V battery system
Output current
(Refer to safe operating curves on page 2)
Current control input
Current monitor output
Voltage control input
1 – 5 V
Zero to max. current
Zero to full load
The BatMod is also available in booster
versions that enable the designer to create systems
capable of multiple kilowatts of
output power.
1 – 5 V
0 – 2.5 V
Zero to FS output
Output voltage setpoint
Trimmable +10%, -25%
15 V, 30 V, 60 V +/-1%
12 V, 24 V, 48 V
Output Respectively
With its wide range of input options, the BatMod
is compatible with all major
battery types. This new current output
module finds application in systems where easily
programmable current is of primary importance.
V-Mode: 300 µsec typ.
I-Mode: 250 µsec typ.
VNOM for 50 – 100%
load changes
Dynamic characteristics
Dielectric withstand
Input to output
Output to baseplate
Input to baseplate
3,000 VRMS
500 VRMS
1,500 VRMS
Consult factory for availability of input/output volt-
age ranges not shown.
Packaging Options
Part Numbering
(typical model: input 300 Vdc, output 12 Vdc at 200 W)
SlimMods™, high power density, flangeless
packages and FinMods™, featuring integral
finned heatsinks.
V I * - 2 6 1 - E U - B M
* E = RoHS
SlimMod: Option suffix: - S
Example:
VX - XXX - XU - BM - S
Module
2 =Driver
B=Booster
Input Voltage
Output Voltage
Product Grade Temperatures (°C)
FinMod: Option suffix: - F1, - F2, - F3 and - F4
Examples:
VX - XXX - XU -BM -F1, 0.25"H longitudinal fin
VX - XXX - XU -BM -F2, 0.5"H longitudinal fin
VX - XXX - XU -BM -F3, 0.25"H transverse fin
VX - XXX - XU -BM -F4, 0.5"H transverse fin
Nominal
Range
3 = 48 V 42 – 60 V
5 = 150 V 100 – 200 V
6 = 300 V 200 – 400 V
Nominal
Range
Grade Operating
Storage
1 = 12 V
3 = 24 V1
4 = 48 V
11.25 – 16.5 V
22.5 – 33.0 V
45.0 – 66.0 V
E
C =
I
=
-
-
-
-
10 to +85
25 to +85
40 to +85
55 to +85
-
-
-
-
20 to +100
40 to +100
55 to +100
65 to +100
=
M =
1Available in 300 V input only
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
BatMod Battery Charger Current Source Modules
Rev. 1.5
Page 1 of 3
Set your site on VICOR at www.vicorpower.com
MECHANICAL DIAGRAM
4.60
RoHS
Standard
(116,8)
3.60
(91,4)
.50
0.080 (2,0) Dia (2) places
Matte tin over copper alloy
0.080 (2,0) Dia (2) places
Solder plate over copper alloy
(12,7)
1.80
(45,7)
.30±.015
(7,6)±(0,38)
Pin # Function
1
+In
2
3
4
5
6*
7*
8*
9
Gate In
Gate Out
-In
+Out
VTRIM
ITRIM
IMON
-Out
4
3
9
8
7
6
2.10
(53,3)
1.40
BatMod
(35,6)
(25,4)
1.00
.70
2
1
(17,8)
(10,2)
.40
5
.35±.015
(8,9)±(0,38)
* Do not connect on booster modules
FULL R
.15
(3,8)
.15
(3,8)
RoHS
Standard
Product ID
this surface
0.040 (1,0) Dia (7) places
0.040 (1,0) Dia (7) places
Matte tin over copper alloy
Solder plate over copper alloy
2.40
(61,0)
4.20
(106,7)
.30
(7,6) Min
1.75
(44,5)
.22
(5,6) MIN
+.030 (0,76)
-.000 (0)
.50
(12,7)
.01
.12
(3,0)
Aluminum Base
Safe Operating Conditions
Power Current
Power
Current
Exceeded Exceeded
Current
Exceeded
Power
Exceeded
Exceeded Exceeded
High Program
Exceeded
High Program
Exceeded
High Program
Exceeded
36
32
28
24
20
16
12
8
72
18
16
14
12
Maximum
Voltage
Setpoint
Maximum
Voltage
Setpoint
16.5 V
33.0 V
Maximum
Voltage
Setpoint
66.0 V
64
56
Safe Operating Area
Safe Operating Area
Safe Operating Area
27.6 V
13.8 V
55.2 V
48
40
32
24
16
Minimum
Voltage
Setpoint
22.5 V
Minimum
Voltage
Setpoint
Minimum
Voltage
Setpoint
11.25 V
6.9 V*
45.0 V
10
8
Minimum
Operating
Voltage
Minimum
Operating
Voltage
Minimum
Operating
Voltage
13.8 V*
27.6 V*
6
4
4
8
2
2
4
6
8
10 12 14 16
1
3
4
5
6
7
8
0.5
1
1.5
2
2.5
3
3.5 4
2
Amps
Amps
Amps
7.25 A
14.5 A
3.6 A
12 V Battery System
*Maximum recommended battery discharge.
24 V Battery System
48 V Battery System
Typical Applications
+IN
+IN
GATE
IN
+Out
VTRIM
ITRIM
IMON
+OUT
+
+
–
TRIM
V
GATE
IN
GATE
OUT
External
Control
Functions
External
Control
Functions
12 – 48 V
Battery
ITRIM
IMON
DC Input
DC Input
BatMod
Load
BatMod
GATE
OUT
–
–Out
–OUT
–In
–IN
Figure 1 — DC Input Battery Charger
Figure 2 — DC Input Programmable Current Source
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
BatMod Battery Charger Current Source Modules
Rev. 1.5
Page 2 of 3
Set your site on VICOR at www.vicorpower.com
Warranty
Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal
use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or
maintenance. Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original
purchaser only.
EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the
buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned
without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the
product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty.
Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed
for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability, function,
or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it con-
vey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of its compo-
nents in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor Terms and
Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and indemnifies Vicor
against all damages.
Vicor s comprehensive line of power solutions includes high density AC-DC
and DC-DC modules and accessory components, fully configurable AC-DC
and DC-DC power supplies, and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its
use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or
malfunction could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available
upon request.
Specifications are subject to change without notice.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent
applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual
Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
BatMod Battery Charger Current Source Modules
Rev. 1.5
8/07
Set your site on VICOR at www.vicorpower.com
相关型号：
VI-263-MU-F3
DC-DC Regulated Power Supply Module, 1 Output, 200W, Hybrid, 4.600 X 2.400 INCH, 0.500 INCH HEIGHT, MODULE-9
VICOR
VI-263-MU-F4
DC-DC Regulated Power Supply Module, 1 Output, 200W, Hybrid, 4.600 X 2.400 INCH, 0.500 INCH HEIGHT, MODULE-9
VICOR
VI-263-MV-F3
DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid, 4.600 X 2.400 INCH, 0.500 INCH HEIGHT, MODULE-9
VICOR
VI-263-MV-F4
DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid, 4.600 X 2.400 INCH, 0.500 INCH HEIGHT, MODULE-9
VICOR
©2020 ICPDF网 联系我们和版权申明