VI-NU1-IP [VICOR]
AC-DC Regulated Power Supply Module, 1 Output, 450W, 9.245 X 7.400 INCH, 1.370 INCH HEIGHT, MODULE;型号: | VI-NU1-IP |
厂家: | VICOR CORPORATION |
描述: | AC-DC Regulated Power Supply Module, 1 Output, 450W, 9.245 X 7.400 INCH, 1.370 INCH HEIGHT, MODULE |
文件: | 总6页 (文件大小:735K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FlatPAC™
50 to 600 Watts Autoranging, AC-DC Switchers
Features
Configuration Chart
• RoHS compliant (VE versions)
• Microcontroller architecture
• Inputs: 115/230 Vac autoranging
0
1
1
E U U U
-
Typical Model: VI-RU
-
Input
115/230 Vac
Output
Input Characteristics
90–132/180–264 Vac
U = Autoranging
1: 5 VDC at 200W
2: 12 VDC at 200W
3: 12 VDC at 200W
• Meets FCC Part 15, EN55022,
Class B conducted emissions
• 80 – 90% efficiency
Substitute VE– for VI– for RoHS compliant versions
• Any output: 1 to 95VDC
Configuration
Single Output
Total
Power
# of
Converters
• Module enable/disable
(except LU series)
Dimensions
• UL, TÜV, CE marked
9.25” x 2.5” x 1.37”
(234,8 x 124,5 x 34,8mm)
9.25” x 4.9” x 1.37”
(234,8 x 124,5 x 34,8mm)
9.25” x 7.3” x 1.37”
(234,8 x 185,4 x 34,8mm)
• Remote sense and current limit
VI-LU
VI-MU
VI-NU
-
50 – 200W
200 – 400W
300 – 600W
1
2
3
• BUS OK and AC OK
(except LU series)
-
• 40ms ride-through time
• OVP and thermal shutdown
• 1 output; up to 200W
-
Dual Output
9.25” x 4.9” x 1.37”
VI-PU
-
100 – 400W
150 – 600W
2
3
• 1 or 2 outputs; up to 400W
(234,8 x 124,5 x 34,8mm)
9.25” x 7.3” x 1.37”
(234,8 x 185,4 x 34,8mm)
• 1, 2, or 3 outputs; up to 600W
VI-QU
-
Product Highlights
Triple Output
9.25” x 7.3” 1.37”
(234,8 x 185,4 x 34,8mm)
VI-RU
-
150 – 600W
3
If you’re looking for the convenience
of a complete, low profile, agency-approved
switching power supply, look no further. The
FlatPAC combines Vicor’s workhorse VI-200
family of DC-DC converters with a modular
package and front-end subassembly to provide
from 50 to 600W of output power from one to
three outputs.
Output Voltage
Z = 2V
W = 5.5V
M = 10V
1 = 12V
P = 13.8V
2 = 15V
N = 18.5V
3 = 24V
L = 28V
J = 36V
K = 40V
4 = 48V
H = 52V
F = 72V
D = 85V
B = 95V
Y = 3.3V
0 = 5V
V = 5.8V
T = 6.5V
R = 7.5V
X = 5.2V
A flat plate heat sink for use in conduction
cooled applications may be specified as an
alternate to the standard finned version by
adding “CC” to the end of the
Product Grade Temps. °C
Output Power/Current
Grade
Operating
Storage
VOUT ≥5V
VOUT < 5V
E =
C =
0 to +85
0 to +85
–30 to +85
–20 to +100
–20 to +100
–55 to +100
Y
X
= 50W
= 75W
Y
X
= 10A
= 15A
model number.
Vicor’s FlatPAC is also available with a current
controlled output using BatMod converter
modules of 12, 24, or 48VDC outputs. This option
is specified by appending “BM” or “BC” (for
conduction cooled versions) to the end of the
FlatPAC model number.
W = 100W
V
U
W = 20A
V
U
I
=
= 150W
= 200W
= 30A
= 40A
Temperatures apply to product case.
Output Power/Current
VOUT ≥5V
VOUT < 5V
Output Power/Current
W= 100W
V = 150W
U = 200W
S = 300W
Q = 400W
W= 20A
V = 30A
U = 40A
S = 60A
Q = 80A
Mixing VI-200 and BatMods in a single
FlatPAC is not permissible.
VOUT ≥5V
VOUT < 5V
S = 300W
P = 450W
M = 600W
S = 60A
P = 90A
M = 120A
The FlatPAC’s contemporary design allows us to
configure your order quickly and provide rapid
turnaround on standard models. It is truly a
complete power solution, enabling you to spend
more time designing your system and less time
worrying about how to power it.
Options
BC = BatMod/Conduction Cooled
BM = BatMod
CC = Conduction Cooled
FlatPAC™
Page 1 of 6
Rev 1.7
09/2016
vicorpower.com
800 927.9474
FlatPAC™
Specifications
(typical at 25°C, nominal line and 75% load, unless otherwise specified)
INPUT SPECIFICATIONS
Parameter
Min
Typ
Max
Unit
Notes
AC line input
Autoranging
90 – 132/180 – 264
Vac
47 – 63
Hz
Hz
(C-Grade and E-Grade)
(I-Grade)
Line frequency
47 – 440
Inrush current: 115 Vac operation:
1 converter
16
23
39
A
A
A
@ peak line
@ peak line
@ peak line
2 converters
3 converters
Inrush current: 230 Vac operation
1 converter
32
47
78
A
A
A
@ peak line
@ peak line
@ peak line
2 converters
3 converters
Ride-through time (full load)
90/180 Vac low line
5
ms
ms
minimum
minimum
115/230 Vac nominal line
40
AC fail warning time
5
ms
minimum (low line, full load)
@ 1mA (1.5mA max.)
@ 30mA
AC and BUS OK (2 and 3 converter models only)
Off state – Vce
70
V
V
On state – Vcesat
0.4
Module disable
(2 and 3 converter models only, optically isolated LED input)
Continuous forward current
Forward voltage
1 – 30
mA
V
1.65
Dielectric withstand
Primary to chassis GND
Primary to secondary
Secondary to chassis GND
2,121
4,242
707
VDC
VDC
VDC
OUTPUT SPECIFICATIONS
E-Grade
Typ
C-, I-Grade
Parameter
Min
Max
Min
Typ
Max
Unit
Notes
Set point accuracy
Load/line regulation
1%
2%
0.5%
1%
VNOM
0.5%
1%
0.05%
0.2%
0.2%
0.5%
VNOM
VNOM
LL to HL, 10% to Full Load
LL to HL, No Load to full load
Output temperature drift
Long term drift
0.02
0.02
0.01
0.02
0.02
%/°C
Over rated temperature
%/1k hours
Output ripple
2V
150mV
5%
60mV
2%
100mV
3%
p-p
p-p
p-p
20 MHz bandwidth
20 MHz bandwidth
20 MHz bandwidth
5V
10 – 48V
3%
0.75%
1.5%
Output voltage trimming[1]
50%
0.5
110%
50%
110%
Total remote sense
compensation
0.5
Volts
VNOM
INOM
INOM
0.25V max. neg. leg
Recycle power
OVP set point
125%
115%
105%
20%
125%
135%
125%
130%
Current limit
105%
20%
135%
140%
Automatic restart
Short circuit current[2]
FlatPAC™
Page 2 of 6
Rev 1.7
09/2016
vicorpower.com
800 927.9474
FlatPAC™
Specifications (Cont.)
THERMAL CHARACTERISTICS
E-Grade
Typ
C-, I- Grade
Typ
Parameter
Min
Max
Min
Max
Units
Test Conditions
Efficiency
78 – 88%
95
80 – 90%
95
@ 5V and higher
Cool and recycle power
to restart
Shut down temp. — case
Operating temp. — case
90
105
85
90
105
85
°C
°C
See Thermal Curves
MECHANICAL SPECIFICATIONS
E-Grade
C-, I- Grade
Typ
Parameter
Min
Typ
Max
Min
Max
Units
Test Conditions
[3]
22.4
22.4
Ounces
(Grams)
Weight
(652)
(652)
AGENCY APPROVALS
Safety Standards
Markings
Notes
UL1604, UL60950-1
cURus
UL / CSA / EN / IEC 60950-1
cTÜVus,
CE Mark
Low Voltage Directive
EMI / EMC Characteristics
(Performed on selected samples representative of the U Series FlatPac product family.)
Parameter
Notes
Conducted emissions, LISN
Radiated emissions, 10 meters
Electrostatic discharge
RF radiated immunity, E-field
Electrical fast transients/burst
Surge immunity
EN 55022 and FCC R&R, Part 15, Subpart B, Class B
EN 55022; 1998 and FCC R&R, Part 15, Subpart B, Class A
IEC 61000-4-2: 1995, Level 4; 8kV Contact, 15kV Air Discharge
IEC 61000-4-3: 1997; 80MHz to 1.0GHz, 3V/M, CW
EN 61000-4-4: 1995, Level 3; 2kV,
EN 61000-4-5: 1996 Class 3; 2kV Line to Ground, 1kV Line to Line
IEC 61000-4-6: 1996, class 3, 10VRMS, 150kHz to 80MHz
RF conducted immunity
Power frequency magnetic
field immunity
IEC 61000-4-8: 1994, 30 to 300 A/M, 50Hz
IEC 61000-4-11: 1994
Voltage dips and interrupts
[1] 10V to 15V outputs, trim range 10%. Consult factory for wider trim range.
[2] Output voltages of 5V or less incorporate foldback current limiting, outputs greater than 5V incorporate straight line current limiting.
[3] For MU, PU series, multiply value by 2; for NU, QU, RU series, multiply value by 3.
FlatPAC™
Page 3 of 6
Rev 1.7
09/2016
vicorpower.com
800 927.9474
FlatPAC™
Thermal Curves
FREE AIR
50 LFM
100 LFM
250 LFM
500 LFM
750 LFM
1000 LFM
5V Output
200
175
150
125
100
75
600
525
450
375
300
225
150
75
400
350
300
250
200
150
100
50
50
25
0
0
0
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
0
5
10
15
20
25
30
At rr°)
Ambient Temperature (Deg. C)
35
40
45
50
55
60
65
70
75
80
85
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
mbent emperaure (°C)
Ambient Temperature (Deg. C)
Ambient Temperature (Deg. C)
LU Series
MU, PU Series
NU, QU, RU Series
10 to 48V Output
200
175
150
125
100
75
400
350
300
250
200
150
100
50
600
525
450
375
300
225
150
75
50
25
0
0
0
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
0
5
10
15
20
25
30
At rr°)
Ambient Temperature (Deg. C)
35
40
45
50
55
60
65
70
75
80
85
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
mTmtr(°
Ambient Temperature (Deg. C)
Ambient Temperature (Deg. C)
LU Series
MU, PU Series
NU, QU, RU Series
Application Circuits
VLINE > 90 (180)Vac
AC
Line
AC Line
Interrupted
AC-OK
BUS-OK
T0 T1
T2 T3
T4
Conditions: Full Load 90 (180)Vac, AC Line
Time Interval
T0-T1
Min
0
0
5
5
Typ
0.1
40
–
Max
1.0
–
–
–
Units
ms
ms
ms
ms
Notes
MOD-DIS –
MOD-DIS +
AC-OK –
Internal
2-Up
and
T2-T3
T2-T4
T3-T4
Ride-through time
Hold-up time
AC fail warning time
Supervisory
Circuits
AC-OK +
3-Up
(Optocouplers)
BUS-OK –
BUS-OK +
–
Power Up and Power Down Sequencing
L1
L2/N
GND
1-Up
AC Mains
Earth Ground
+ Vout
+O
R1
+S
Trim
–S
R2
10K
AC Mains Connections
Vout RTN
–O
Resistor Values for Trimming Standard Output Voltages
Nom. Output Voltage 5V
12V
15.8
90
15V
22.1
90
24V
41.2
90
28V
48.7
90
48V Trim Range
R1(kΩ)
R2(kΩ)
0.953
90
90.9
+10%, -10%
90
Output Trimming
FlatPAC™
Page 4 of 6
Rev 1.7
09/2016
vicorpower.com
800 927.9474
FlatPAC™
Mechanical Drawings
Inputs
1 MOD DIS–
STANDARD Models
Input connector,
2 MOD DIS+
Amp P/N 644488-6;
3 AC OK–
mating connector,
4 AC OK+
1.375 ±±.±0±
(34,91 ±±,51ꢀ
1.11
MTA-100 IDC Series
5 BUS OK–
( 08,19ꢀ
6 BUS OK+
7 AC IN L1
8 AC IN L2/N
#16-12 AWG wire
9 CHASSIS GND
Terminals for
±.5±
(10,57ꢀ
9.045 ±±.±3±
(034,80 ±±,7ꢁꢀ
Outputs
10 +OUT (#10-32 Stud)
11 +OUT
12 +SENSE (VTRIM*)
13 TRIM (ITRIM*)
14 –SENSE (IMON*)
15 –OUT
Output connector,
CONDUCTION COOLED Models “–CC”
Amp P/N 644486-5;
mating connector,
MTA-100 IDC Series
16 –OUT (#10-32 Stud)
*On FlatPACs with BatMODs only.
LU Series
MOUNTING HOLE
ø 0.15 0.01 THRU
4 PLACES
10
11
12
13
14
15
16
2.540 0.030
(64,52 0,76ꢀ
7
2.156 0.010
8
(54,76 0,25ꢀ
9
1.27
(32,26ꢀ
0.192 0.010
(4,88 0,25ꢀ
0.18
6.00
(4,57ꢀ
(152,4ꢀ
MU Series
PU Series
MOUNTING HOLE
ø 0.15 0.01 THRU
5 PLACES
10
11
12
13
14
15
16
10
11
12
13
14
15
16
+
–
+
4.562 0.010
(115,87 0,25ꢀ
4.960 0.030
(125,98 0,76ꢀ
10
11
12
13
14
15
16
3.83
(97,16ꢀ
2.281 0.010
7
8
9
(57,94 0,25ꢀ
1.17
(29,72ꢀ
0.199 0.010
(5,05 0,25ꢀ
0.18
6.00
(152,4ꢀ
(4,57ꢀ
NU Series
QU Series
RU Series
MOUNTING HOLE
ø 0.15 0.01 THRU
6 PLACES
+
–
+
10
10
11
12
13
14
15
16
10
11
12
13
14
15
16
7.380 0.030
(187,45 0,76ꢀ
1
2
3
4
5
6
7.000 0.010
(177,8 0,25ꢀ
16
10
10
10
11
12
13
14
15
16
4.710 0.010
(119,63 0,25ꢀ
5.48
(139,19ꢀ
16
16
7
8
9
+
–
10
11
12
13
14
15
16
10
11
12
13
14
15
16
10
11
12
13
14
15
16
2.290 0.010
(58,17 0,25ꢀ
1.93
(49,02ꢀ
–
0.190 0.010
(4,83 0,25ꢀ
0.18
(4,57ꢀ
6.00
(152,4ꢀ
FlatPAC™
Page 5 of 6
Rev 1.7
09/2016
vicorpower.com
800 927.9474
FlatPAC™
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and
accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom
power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor makes no
representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves the right to make
changes to any products, specifications, and product descriptions at any time without notice. Information published by Vicor has been checked
and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies. Testing and other quality con-
trols are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where mandated by government requirements,
testing of all parameters of each product is not necessarily performed.
Specifications are subject to change without notice.
Vicor’s Standard Terms and Conditions
All sales are subject to Vicor’s Standard Terms and Conditions of Sale, which are available on Vicor’s webpage or upon request.
Product Warranty
In Vicor’s standard terms and conditions of sale, Vicor warrants that its products are free from non-conformity to its Standard Specifications (the
“Express Limited Warranty”). This warranty is extended only to the original Buyer for the period expiring two (2) years after the date of shipment
and is not transferable.
UNLESS OTHERWISE EXPRESSLY STATED IN A WRITTEN SALES AGREEMENT SIGNED BY A DULY AUTHORIZED VICOR SIGNATORY, VICOR
DISCLAIMS ALL REPRESENTATIONS, LIABILITIES, AND WARRANTIES OF ANY KIND (WHETHER ARISING BY IMPLICATION OR BY OPERATION
OF LAW) WITH RESPECT TO THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR REPRESENTATIONS AS TO
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY
RIGHT, OR ANY OTHER MATTER.
This warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. Vicor shall not be
liable for collateral or consequential damage. Vicor disclaims any and all liability arising out of the application or use of any product or circuit and
assumes no liability for applications assistance or buyer product design. Buyers are responsible for their products and applications using Vicor prod-
ucts and components. Prior to using or distributing any products that include Vicor components, buyers should provide adequate design, testing
and operating safeguards.
Vicor will repair or replace defective products in accordance with its own best judgment. For service under this warranty, the buyer must contact
Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be
returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the
product was defective within the terms of this warranty.
Life Support Policy
VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS
PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used herein, life support
devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform
when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to
the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause
the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms and Conditions of Sale, the user of Vicor
products and components in life support applications assumes all risks of such use and indemnifies Vicor against all liability and damages.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the prod-
ucts described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property rights is
granted by this document. Interested parties should contact Vicor’s Intellectual Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
FlatPAC™
Page 6 of 6
Rev 1.7
09/2016
vicorpower.com
800 927.9474
©2020 ICPDF网 联系我们和版权申明