01M1503KF [VISHAY]

NTC Thermistors, Radial Leaded and Coated;


型号：	01M1503KF
厂家：	VISHAY
描述：	NTC Thermistors, Radial Leaded and Coated
文件：	总5页 (文件大小：91K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

T, M, C

Vishay Dale

www.vishay.com

NTC Thermistors, Radial Leaded and Coated

FEATURES

• Small size - conformally coated

• Wide resistance range

• Available in 7 different R-T curves

• Available in point matched tolerances down to

1 % and curve tracking precision down to

0.2 ꢀC

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

QUICK REFERENCE DATA

PARAMETER

VALUE

UNIT

Resistance value at 25 ꢀC

30 to 1M

APPLICATIONS

Tolerance on R₂₅-value

(point matched)

1, 5, 10

0.2, 0.5,

Temperature measurement, sensing and control in

industrial, consumer and telecom applications. For

on-board sensing or for accurate remote sensing in metal

probes or housings.

Temperature accuracy

(curve tracking)

ꢀC

_25/75-value

_25/85-value

3477 to 4842

3468 to 4875

50 to 100

DESCRIPTION

Maximum dissipation

Models T, M, and C are conformally coated, leaded

thermistors. The coating is baked-on phenolic for durability

and long-term stability. Models M and C have tinned solid

copper leads. Model T has solid nickel wires with Teflon^®

insulation.

Dissipation factor δ

2 to 3.5

6 to 14

1.3

mW/K

(for information only)

Thermal time constant τ

(for information only)

Response time (oil)

(for information only)

DESIGN-IN SUPPORT

Operating temperature range

at zero power (short term)

-40 to +125 (150)

ꢀC

For complete Curve Computation, visit:

www.vishay.com/thermistors/curve-computation-list/

Weight

≈ 0.075 to 0.15

T, M, C PRODUCT DATA AND R₂₅RESISTANCE RANGE AVAILABILITY

B_25/75

(K)

B_25/85

(K)

TCR₂₅

(%/K)

(kΩ)

R₂₅TꢀL.

AVAILABILITY

CURVE

3477

3679

3925

3964

4247

4437

4842

3486

3694

3943

3974

4262

4461

4875

-3.84

-4.03

-4.30

-4.39

-4.67

-4.83

-5.23

0.03 to 3.3

10 to 56

20 to 220

0.2 to 18

10 to 100

10 to 270

47 to 1000

1, 5, 10

Maximum dissipation at 25 ꢀC in mW

Dissipation factor in mW/K ⁽¹⁾

Response time in s ⁽¹⁾

2.0

1.3

100

3.0

1.4

2.5

1.2

Thermal time constant in s ⁽¹⁾

Note

(1)

For information only, dissipation factor, response time, and thermal time constant are wire type and product size dependent.

STANDARD RESISTANCE VALUES at 25 ꢀC in Ω

270

330

390

470

500

560

680

820

2.2K

2.7K

3.3K

3.9K

4.7K

5.0K

5.6K

6.8K

8.2K

10K

12K

15K

18K

22K

27K

33K

39K

47K

50K

56K

150K

220K

270K

330K

390K

470K

500K

560K

680K

820K

100

120

150

180

220

68K

1.2K

1.5K

1.8K

82K

100K

120K

Note

•

Most popular and available values, intermediate resistance values and tolerances available on request.

Revision: 24-Sep-15

Document Number: 33003

For technical questions, contact: thermistor1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T, M, C

Vishay Dale

www.vishay.com

GLOBAL PART NUMBER AND ORDERING INFORMATION

Global Part Numbering: 01C2001FP for PꢀINT MATCHED THERMISTꢀRS

POINT MATCH

TOLERANCE

CURVE NR

GLOBAL MODEL

RESISTANCE VAL

PACKAGING

2001 = 2K

1503 = 150K

F = 1 %

J = 5 %

K = 10 %

F = lead (Pb)-free, bulk

P = tin / lead, bulk

Global Part Numbering: 01C2001SPC3 for CURVE TRACKING THERMISTꢀRS

CURVE TRACK

TOLERANCE ⁽¹⁾

CURVE

GLOBAL MODEL

RESISTANCE VAL

CHARACTERISTICS

PACKAGING

2001 = 2K

F = lead (Pb)-free,

bulk

P = tin / lead, bulk

A2 A3 A4 A5 A8

B2 B3 B4 B5 B8

C2 C3

C5 C8

Note

(1)

See following pages for tolerance explanations and details.

DIMENSIONS in inches (millimeters)

TYPE M, C

TYPE T

0.25 (6.35) NOM.

TEFLON INSULATED NICKEL WIRE

TINNED COPPER WIRE

1.5 (36.1) MIN.

CLEAN LEAD LENGTH

0.25 (ꢀ6.2 6.ꢁ)

PRꢀDUCT TYPE

Type M

WIRE GAUGE/DIAMETER ⁽¹⁾

AWG 30: 0.0100 (0.254)

Type C

AWG 28: 0.0126 (0.320)

Type T

Insulated AWG 30: 0.0100 (0.254)

Note

(1)

Additional wire gauges (non-insulated) available as AWG24 (type E), AWG26 (type B) and AWG32 (type F). Please contact vishay

(thermistor1@vishay.com) for further details.

R₂₅MIN.

(Ω)

MAX. DIAMETER

(INCH (mm))

STANDARD R₂₅RANGE

(Ω)

MAX. DIAMETER

(INCH (mm))

CURVE NUMBER

0.342 (8.69)

0.150 (3.81)

0.131 (3.33)

0.315 (8.00)

0.136 (3.45)

0.177 (4.50)

0.252 (6.40)

330 to 3K

10K to 56K

27K to 220K

1.8K to 18K

10K to 100K

27K to 270K

330K to 1M

0.095 (2.41) to 0.136 (3.45)

0.095 (2.41) to 0.150 (3.81)

0.095 (2.41) to 0.125 (3.18)

0.095 (2.41) to 0.136 (3.45)

10K

20K

200

10K

47K

Note

•

Maximum body diameter is dependent on selected curve number and value, the lower resistance values have the largest diameter. For a

specific part number within the given resistance ranges, please contact thermistor1@vishay.com for maximum diameter information.

Revision: 24-Sep-15

Document Number: 33003

For technical questions, contact: thermistor1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T, M, C

Vishay Dale

www.vishay.com

TOLERANCES AVAILABLE FOR TYPE T, M, AND C THERMISTORS

DESCRIPTION OF THERMISTOR TOLERANCES

The many applications of thermistors have mandated the need for two basic tolerance schemes for these products - curve

tracking and point match thermistors. An example of the resistance tolerance at various temperatures for the two different

tolerancing methods is described in the following graph:

5 ꢂ POINT MATCH CURVE

ꢀ

25 °C

1 °C CURVE TRACK CURVE

ꢁ

Aꢁ

TEMPERATURE (°C)

Fig. 1

CURVE TRACKING TOLERANCE

Thermistors are calibrated at the high temperature of the curve track range and then final tested at the low temperature of

the curve track range. This ensures that the thermistor will meet the specified temperature accuracy at every temperature

within the desired temperature range. Several temperature ranges are available and the accuracy of the thermistor may be

0.2 ꢀC, 0.5 ꢀC, and 1.0 ꢀC. The curve tracking temperature ranges and their code designators are shown in figure 1 and

“Standard Electrical Specifications for Curve Tracking Thermistors” table.

To specify, add the appropriate suffix from the following table to the part number.

Example: 01M1002SFB3 = curve 1, 10 kΩ at +25 ꢀC, curve tracking to 0.5 ꢀC from 0 ꢀC to +70 ꢀC

STANDARD ELECTRICAL SPECIFICATIONS FOR CURVE TRACKING THERMISTORS

TEMPERATURE

RANGE FꢀR

SPECIFIED

ACCURACY

0 °C to +70 °C

-20 °C to +50 °C

0 °C to +100 °C

25 °C to +90 °C

0 °C to +50 °C

ACCURACY

1 °C 0.5 °C 0.2 °C 1 °C 0.5 °C 0.2 °C 1 °C 0.5 °C 0.2 °C 1 °C 0.5 °C 0.2 °C 1 °C 0.5 °C 0.2 °C

PART Nꢀ.

SUFFIX

- A3

- B3

- C3

- A2

- B2

- C2

- A4

- B4

- C4

n/a

- A5

- B5

- C5

- A8

- B8

- C8

Revision: 24-Sep-15

Document Number: 33003

For technical questions, contact: thermistor1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T, M, C

Vishay Dale

www.vishay.com

POINT MATCH TOLERANCE

The standard leaded thermistors are calibrated and tested at 25 ꢀC to a tolerance of 5 % or 10 %ꢁ however, tighter tolerance,

point matched thermistors are readily available as are special point match temperatures to fit your application.

Since these thermistors have only one controlled point of reference (the point match temperature), the resistance at other

temperatures is given by the specific curve resistance vs. temperature ratio.

POINT MATCH TOLERANCES VS. TEMPERATURE

Point match resistance tolerances at temperatures other

than 25 ºC are not the same as at the calibration

MAX. R vs. T

temperature. This difference is presented in figure 2.

MIN. R vs. T

The tolerance at any given temperature is the point match

tolerance plus a manufacturing tolerance depending on the

specific curve.

NOMINAL R vs. T

PIVOT POINT

(CALIBRATION TEMPERATURE)

25 °C

TEMPERATURE

Fig. 1

DESIGN-IN SUPPORT

A spreadsheet is available for the Vishay thermistor part numbers that gives you the resistance vs temperature data, the

temperature coefficients and accuracy levels at any given temperature range and step. The Steinhart & Hart formula and

coefficients A, B, and C are shown as well. This data can be obtained by visiting the Vishay NTC curve computation page at:

www.vishay.com/thermistors/curve-computation-list/ or send your part number with required temperature range and step to

thermistor1@vishay.com.

Revision: 24-Sep-15

Document Number: 33003

For technical questions, contact: thermistor1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

01M1503KF [VISHAY]

相关型号：

01M1503KP

01M1802FF

01M1802KF

01M1802SFA5

01M1802SFA8

01M1802SFB3

01M1802SFB8

01M2001FF

01M2001FP

01M2001JF

01M2001JP

01M2001KF