131P473X91K0T04 [VISHAY]

Film Snubber Capacitors Metal-Case, Paper/Polyester, Dielectric Extended Foil Electrodes; 电影缓冲电容器金属外壳，纸/涤纶，扩展介质薄膜电极


型号：	131P473X91K0T04
厂家：	VISHAY
描述：	Film Snubber Capacitors Metal-Case, Paper/Polyester, Dielectric Extended Foil Electrodes 电影缓冲电容器金属外壳，纸/涤纶，扩展介质薄膜电极电容器
文件：	总2页 (文件大小：70K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Type 131P

Vishay Sprague

Film Snubber Capacitors

Metal-Case, Paper/Polyester, Dielectric

Extended Foil Electrodes

FEATURES

• Suggested replacement for Type 196P

• Moderate cost

• Small size

• High peak current ratings

• High corona starting voltage

PERFORMANCE CHARACTERISTICS

DC Life Test: 140% of rated voltage for 250 hours @ + 125°C.

No open or short circuits. No visible damage. Maximum

Capacitance Change: ± 5%. Minimum IR = 60% of initial limit.

Maximum DF = 1.0%.

Moisture Resistance: MIL-STD-202, Method 106E, 10

cycles. No visible damage. Maximum Capacitance Change: ±

3%. Minimum IR = 60% of initial limit. Maximum DF = 1.2%.

Thermal Shock and Immersion Cycling: No visible damage.

Maximum Capacitance Change: ± 1%. Minimum IR = 50% of

initial limit. Maximum DF = 1.2%.

Operating Temperature: - 65°C to + 125°C.

Capacitance Range: 0.01µF to 0.47µF.

Capacitance Tolerance: ± 20%, ± 10%, ± 5%, ± 2%.

Voltage Rating: 600 WVDC to 1000 WVDC.

Dissipation Factor: 1.0% maximum.

Voltage Test: 200% of rated DC voltage for 2 minutes.

Insulation Resistance: At + 25°C: 20,000 Megohm -

Microfarads or 30,000 Megohm minimum. At + 125°C:

20 Megohm - Microfarads or 250 Megohm minimum.

PHYSICAL CHARACTERISTICS

Lead Pull: 5 pounds (2.3 kilograms) for one minute.

No physical damage.

Lead Bend: After three complete consecutive bends, no damage.

Lead Wire: Bare, solid tinned wire. Case Diameters: .312"

[7.92mm], No. 22 AWG; .400" [10.16mm] and over, No. 20 AWG.

Marking: Sprague^®trademark, type or part number,

capacitance and voltage.

Capacitance Change with Temperature: At - 65°C,

- 10% typical. At + 125°C, + 10% typical.

ENVIRONMENTAL CHARACTERISTICS

Vibration Test (Condition B): No mechanical

damage, short, open or intermittent circuits.

STANDARD RATINGS in inches [millimeters]

Max. rms

CURRENT

@ +

Max.

PEAK

CURRENT

@ + 85°C

Max. rms

CURRENT

@ +

Max.

PART NUMBER

PEAK

± 10%

TOLERANCE

CAPACITANCE

NOMINAL CASE SIZE

D x L

CURRENT

@ + 125°C

(µF)

85°C

125°C

600 WVDC / 370 VAC

0.010

0.022

0.047

0.10

0.22

0.47

131P103X9600S02*

131P223X9600S02*

131P473X9600S02*

131P104X9600S02

131P224X9600S02

131P474X9600S02

0.312 x 0.875 [7.92 x 22.23]

0.400 x 0.875 [10.16 x 22.23]

0.400 x 1.375 [10.16 x 34.93]

0.562 x 1.375 [14.27 x 34.93]

0.670 x 1.625 [17.02 x 41.28]

0.750 x 2.375 [19.05 x 60.33]

0.037

0.058

0.085

0.149

0.354

0.656

1.5

3.3

7.0

15.0

33.0

70.0

0.025

0.041

0.059

0.104

0.247

0.459

1.0

2.3

4.9

10.5

23.1

49.0

1000 WVDC / 500 VAC

0.010

0.022

0.047

0.10

0.22

0.47

131P103X91K0S02*

131P223X91K0S02*

131P473X91K0S02*

131P104X91K0S02*

131P224X91K0S02*

131P474X91K0S02*

0.400 x 0.875 [10.16 x 22.23]

0.400 x 1.375 [10.16 x 34.93]

0.562 x 1.375 [14.27 x 34.93]

0.670 x 1.625 [17.02 x 41.28]

0.750 x 2.125 [19.05 x 53.98]

1.000 x 2.375 [25.40 x 60.33]

0.039

0.079

0.133

0.241

0.427

0.772

2.5

5.5

11.0

25.0

55.0

117.0

1.7

3.8

7.7

17.5

38.5

81.9

0.027

0.055

0.093

0.168

0.298

0.540

* All standard inventoried Part Numbers will be stocked in terminal and case style number S04.

ORDERING INFORMATION

131P

103

600

CASE

STYLE

TYPE

CAPACITANCE

TOLERANCE

DC VOLTAGE

RATING

TERMINAL

This is expressed in picofarads.

The first two digits are the

significant figures. The third is the

number of zeros to follow. Values

must conform to the decade rating

for the tolerance specified.

X0 = ± 20%

X9 = ± 10%

(Inventoried)

X5 = ± 5%

X2 = ± 2%

This is expressed in

volts. (1000 WVDC

coded as 1K0)

S = Wire leads

T = Soldering tab*

Note: Inventoried

items are all S04.

* Soldering tabs are available only on case diameters equal to or greater

than 0.400" [10.16mm]. Consult the factory for special case styles and

terminal configurations.

For technical questions, contact spresale@vishay.com

www.vishay.com

Document Number: 42033

Revision 17-Nov-03

Legal Disclaimer Notice

Vishay

Notice

Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,

or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's

terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express

or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness

for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.

Customers using or selling these products for use in such applications do so at their own risk and agree to fully

indemnify Vishay for any damages resulting from such improper use or sale.

Document Number: 91000

Revision: 08-Apr-05

www.vishay.com

131P473X91K0T04 [VISHAY]

相关型号：

131P473X9600S02

131P473X9600S04

131P473X9600T02

131P473X9600T04

131P474X01K0S02

131P474X01K0S04

131P474X01K0T02

131P474X01K0T04

131P474X0600S02

131P474X0600S04

131P474X0600T02

131P474X0600T04