135D686X0025C2 [VISHAY]
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation; 湿钽电容器钽外壳与玻璃 - 钽密封为 - 55 ΣC至+ 200 ΣC操作型号: | 135D686X0025C2 |
厂家: | VISHAY |
描述: | Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation |
文件: | 总6页 (文件大小:100K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
135D
Vishay
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
FEATURES
• Terminations: standard tin/lead (SnPb),
100 % Tin (RoHS compliant) available
Pb-free
Available
• Standard and extended ratings
RoHS*
electrolytic
• Model
135D
tantalum-case
COMPLIANT
capacitors incorporate the advantages of all the
varieties of electrolytic capacitors and eliminate most of the
disadvantages. These units have a 3 volt reverse voltage
capability at + 85 °C and a higher ripple current capability
than any other electrolytic type with similar combinations of
capacitance and case size.
• Designed for the aerospace applications, this capacitor
was developed under partial sponsorship of the Marshall
Space Flight Center, National Aeronautics and Space
Administration. The capacitors have a high resistance to
damage from shock and vibration. Extended range ratings
and high temperature designs areavailable.
• Model 135D capacitors are commercial equivalents of
Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style;
TLT, TXT, THT, THX and Military Style CLR79 and CLR81,
designed to meet the performance requirements of Military
Specification MIL-PRF-39006/22/25. Capacitors to meet
MILPRF- 39006/22/25 should be ordered by part numbers
shown in that specification.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C.
(To + 200 °C with voltage derating.)
Life Test: Capacitors are capable of withstanding a 2000 h
life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
Capacitance Tolerance: At 120 Hz, + 25 °C.
standard. 10 %, 5 % available as special.
20 %
Following life test:
1. DCL, measured at + 85 °C rated voltage, shall not be in
excess of the original requirement.
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
2. The equivalent series resistance shall not exceed 150 %
of the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement.
ORDERING INFORMATION
135D
306
X0
006
C
2
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING CASE CODE
STYLE NUMBER
RoHS COMPLIANT
AT + 85 °C
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow
X0 = 20 %
X9 = 10 %
X5 = 5 %
This is expressed in volts. See Ratings
Standard
0 = No outer tube.
2 = Outer polyesterfilm
insulation.
E3 = 100 % tin
termination (RoHS
compliant design)
Blank = SnPb
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an “R”
(6R3 = 6.3 V)
and
Case Codes
Table
termination
High Temperature
8 = No outer tube.
6 = High temperature film
insulation (above + 125 °C)
(standard design)
Note
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to
the unit weight.
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
42
For technical questions, contact: tantalum@vishay.com
Document Number: 40024
Revision: 10-Oct-08
135D
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
Vishay
DIMENSIONS in inches [millimeters]
D
E
L1
E
0.0253 0.002 ꢀ0.6ꢁ 0.05ꢂ DIA.
(NO. 22 AWG TINNED NICKEL LEADS)
SOLDERABLE AND WELDABLE
WELD
TANTALUM
L2
CASE CODE
WEIGHT
(g)
L2
D
L1
E
TYPE DCLR 79/81
(Max.)
(Max.)
135D
EQUIV.
0.188 0.016
[4.78 0.41]
0.281 0.016
[7.14 0.41]
0.375 0.016
[9.53 0.41]
0.375 0.016
[9.53 0.41]
0.453 + 0.031 - 0.016
[11.51 + 0.79 - 0.41]
0.641 + 0.031 - 0.016
[16.28 + 0.79 - 0.41]
0.766 + 0.031 - 0.016
[19.46 + 0.79 - 0.41]
1.062 + 0.031 - 0.016
[26.97 + 0.79 - 0.41]
0.734
[18.64]
0.922
[23.42]
1.047
[26.59]
1.343
[34.11]
1.500 0.250
[38.10 6.35]
2.250 0.250
[57.15 6.35]
2.250 0.250
[57.15 6.35]
2.250 0.250
[57.15 6.35]
C
T1
2.6
6.2
F
T
K
T2
T3
T4
11.6
17.7
Note
*For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body.
STANDARD RATINGS
MAX. ESR MAX. IMP.
MAX. DCL (µA)
at
MAX. CAPACITANCE CHANGE
(%) at
MAX.
RIPPLE
ꢁ0 kHz
Irms
at
at
CAPACITANCE CASE
PART NUMBER*
+ 25 °C
120 Hz
- 55 °C
120 Hz
(µF)
CODE
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
+ 125 °C
6 WVDC at + 85 °C . . . ꢁ WVDC at + 125 °C. . . 3.6 WVDC at + 200 °C
30
68
C
C
F
F
T
T
K
135D306X0006C2
135D686X0006C2
135D147X0006F2
135D277X0006F2
135D337X0006T2
135D567X0006T2
135D128X0006K2
4.0
3.2
2.0
2.2
1.4
1.3
1.0
100
60
40
25
20
25
20
1.0
1.0
1.0
1.0
2.0
2.0
3.0
2.0
2.0
3.0
6.5
7.9
- 40
- 40
- 40
- 44
- 44
- 64
- 80
+ 10.5
+ 14
+ 14
+ 17.5
+ 14
+ 17.5
+ 25
+ 12
+ 16
+ 16
+ 20
+ 16
+ 20
+ 25
820
960
140
270
330
560
1200
1200
1375
1800
1900
2265
13.0
14.0
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . ꢁ.8 WVDC at + 200 °C
25
56
C
C
F
F
T
T
K
135D256X0008C2
135D566X0008C2
135D127X0008F2
135D227X0008F2
135D297X0008T2
135D437X0008T2
135D857X0008K2
4.0
3.3
2.6
2.4
1.8
1.4
1.0
100
59
50
30
25
25
22
1.0
1.0
1.0
1.0
2.0
2.0
4.0
2.0
2.0
2.0
7.0
6.0
- 40
- 40
- 44
- 44
- 64
- 64
- 80
+ 10.5
+ 14
+ 12
+ 16
+ 20
+ 20
+ 20
+ 20
+ 25
820
900
120
220
290
430
850
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 25
1230
1370
1770
1825
2330
14.0
16.0
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C
20
47
C
C
F
F
T
T
K
135D206X0010C2
135D476X0010C2
135D107X0010F2
135D187X0010F2
135D257X0010T2
135D397X0010T2
135D757X0010K2
4.0
3.7
2.4
2.2
1.8
1.5
1.0
120
90
60
40
30
25
23
1.0
1.0
1.0
1.0
2.0
2.0
4.0
2.0
2.0
4.0
- 32
- 36
- 36
- 36
- 40
- 64
- 80
+ 10.5
+ 14
+ 14
+ 14
+ 14
+ 12
+ 16
+ 16
+ 16
+ 16
+ 20
+ 25
820
855
100
180
250
390
750
1200
1365
1720
1800
2360
7.0
10.0
16.0
16.0
+ 17.5
+ 25
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C
15
33
70
120
170
270
540
C
C
F
F
T
T
K
135D156X0015C2
135D336X0015C2
135D706X0015F2
135D127X0015F2
135D177X0015T2
135D277X0015T2
135D547X0015K2
4.4
4.0
2.8
2.6
2.4
2.2
1.0
155
90
75
50
35
30
23
1.0
1.0
1.0
1.0
2.0
2.0
6.0
2.0
2.0
4.0
- 24
- 28
- 28
- 28
- 32
- 56
- 80
+ 10.5
+ 14
+ 14
+ 17.5
+ 14
+ 17.5
+ 25
+ 12
+ 16
+ 16
+ 20
+ 16
+ 20
+ 25
780
820
1150
1450
1480
1740
2330
7.0
10.0
16.0
24.0
Note
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
Document Number: 40024
Revision: 10-Oct-08
For technical questions, contact: tantalum@vishay.com
www.vishay.com
43
135D
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
Vishay
STANDARD RATINGS
MAX. ESR MAX. IMP.
MAX. DCL (µA)
at
MAX. CAPACITANCE CHANGE
(%) at
MAX.
RIPPLE
ꢁ0 kHz
rms
at
at
CAPACITANCE CASE
PART NUMBER*
+ 25 °C
120 Hz
- 55 °C
120 Hz
(µF)
CODE
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
+ 125 °C
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C
10
22
50
100
120
180
350
C
C
F
F
T
T
K
135D106X0025C2
135D226X0025C2
135D506X0025F2
135D107X0025F2
135D127X0025T2
135D187X0025T2
135D357X0025K2
5.3
4.2
3.0
2.8
2.6
2.2
1.3
220
140
70
50
38
1.0
1.0
1.0
1.0
2.0
2.0
7.0
2.0
2.0
2.0
10.0
6.0
18.0
28.0
- 16
- 20
- 28
- 28
- 32
- 48
- 70
+ 8
+ 10.5
+ 13
+ 13
+ 13
+ 13
+ 25
+ 9
715
800
+ 12
+ 15
+ 15
+ 15
+ 15
+ 25
1130
1435
1450
1525
1970
32
24
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C . . . 18 WVDC at + 200 °C
8
15
40
68
100
150
300
C
C
F
F
T
T
K
135D805X0030C2
135D156X0030C2
135D406X0030F2
135D686X0030F2
135D107X0030T2
135D157X0030T2
135D307X0030K2
6.6
6.2
4.0
2.9
2.7
2.3
1.4
275
175
65
60
40
1.0
1.0
1.0
1.0
2.0
2.0
8.0
2.0
2.0
5.0
- 16
- 20
- 24
- 24
- 28
- 48
- 60
+ 8
+ 12
+ 12
+ 12
+ 15
+ 12
+ 15
+ 25
640
780
+ 10.5
+ 10.5
+ 13
+ 10.5
+ 13
1120
1285
1450
1525
1950
8.0
12.0
18.0
32.0
35
25
+ 25
35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C
15
68
270
C
F
K
135D156X0035C2
135D686X0035F2
135D277X0035K2
6.2
2.9
1.4
175
60
26
0.75
1.0
3.0
1.5
2.0
12.0
- 20
- 24
- 58
+ 10.5
+ 13
+ 25
+ 12
+ 15
+ 25
660
1195
1950
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C
5
10
25
47
60
82
160
C
C
F
F
T
T
K
135D505X0050C2
135D106X0050C2
135D256X0050F2
135D476X0050F2
135D606X0050T2
135D826X0050T2
135D167X0050K2
8.0
6.4
4.6
3.7
2.9
2.5
1.5
400
250
95
70
45
1.0
1.0
1.0
1.0
2.0
2.0
8.0
2.0
2.0
5.0
- 16
- 24
- 20
- 28
- 16
- 32
- 50
+ 5
+ 8
+ 6
+ 9
580
715
+ 10.5
+ 13
+ 10.5
+ 13
+ 25
+ 12
+ 15
+ 12
+ 15
+ 25
1005
1155
1335
1400
1900
9.0
12.0
16.0
32.0
45
27
60 WVDC at + 85 °C . . . ꢁ0 WVDC at + 125 °C . . . 36 WVDC at + 200 °C
4
8.2
20
39
50
C
C
F
F
T
T
K
135D405X0060C2
135D825X0060C2
135D206X0060F2
135D396X0060F2
135D506X0060T2
135D686X0060T2
135D147X0060K2
9.3
6.6
4.7
3.4
2.9
2.5
1.5
550
275
105
90
50
50
1.0
1.0
1.0
1.0
2.0
2.0
8.0
2.0
2.0
5.0
- 16
- 24
- 16
- 28
- 16
- 32
- 40
+ 5
+ 8
+ 8
+ 10.5
+ 10.5
+ 10.5
+ 20
+ 6
+ 9
+ 9
+ 15
+ 12
+ 15
+ 20
525
625
930
1110
1330
1365
1850
9.0
12.0
16.0
32.0
68
140
28
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . ꢁ5 WVDC at + 200 °C
3.5
6.8
15
33
40
C
C
F
F
T
T
K
135D355X0075C2
135D685X0075C2
135D156X0075F2
135D336X0075F2
135D406X0075T2
135D566X0075T2
135D117X0075K2
9.5
6.8
5.3
4.2
3.0
2.6
1.5
650
300
150
90
60
60
1.0
1.0
1.0
1.0
2.0
2.0
9.0
2.0
2.0
5.0
10.0
12.0
17.0
36 .0
- 16
- 20
- 16
- 24
- 16
- 28
- 35
+ 5
+ 8
+ 8
+ 10.5
+ 10.5
+ 10.5
+ 20
+ 6
+ 9
+ 9
+ 15
+ 12
+ 15
+ 20
525
610
890
1000
1250
1335
1850
56
110
29
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C
2.5
4.7
11
22
25
30
43
56
86
C
C
F
F
T
T
T
K
K
135D255X0100C2
135D475X0100C2
135D116X0100F2
135D226X0100F2
135D256X0125T2
135D306X0100T2
135D436X0100T2
135D566X0125K2
135D866X0100K2
10.6
8.5
6.0
4.8
3.2
3.3
2.6
1.6
1.6
950
500
200
100
93
80
70
32
30
1.0
1.0
1.0
1.0
2.0
2.0
2.0
10.0
9.0
2.0
2.0
4.0
- 16
- 16
- 16
- 16
- 16
- 16
- 20
- 25
- 25
+ 7
+ 7
+ 7
+ 7
+ 7
+ 7
+ 7
+ 15
+ 15
+ 8
+ 8
+ 8
+ 8
+ 8
+ 8
+ 8
+ 15
+ 15
505
565
835
9.0
965
13.0
12.0
17.0
40.0
36.0
1200
1240
1335
1800
1800
Note
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
www.vishay.com
44
For technical questions, contact: tantalum@vishay.com
Document Number: 40024
Revision: 10-Oct-08
135D
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
Vishay
STANDARD RATINGS
MAX. ESR MAX. IMP.
MAX. DCL (µA)
at
MAX. CAPACITANCE CHANGE
(%) at
MAX.
RIPPLE
ꢁ0 kHz
rms
at
at
CAPACITANCE CASE
PART NUMBER*
+ 25 °C
120 Hz
- 55 °C
120 Hz
(µF)
CODE
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
+ 125 °C
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C
1.7
3.6
9
14
18
C
C
F
F
T
135D175X0125C2
135D365X0125C2
135D905X0125F2
135D146X0125F2
135D186X0125T2
15.6
10.0
7.4
5.7
3.7
1250
600
240
167
129
1.0
1.0
1.0
1.0
2.0
2.0
2.0
5.0
7.0
9.0
- 16
- 16
- 16
- 16
- 16
+ 7
+ 7
+ 7
+ 7
+ 7
+ 8
+ 8
+ 8
+ 8
+ 8
415
520
755
860
1130
Note
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
EXTENDED RATINGS
MAX. ESR MAX. IMP.
MAX. DCL (µA)
at
MAX.. CAPACITANCE
CHANGE (%) at
MAX.
RIPPLE
ꢁ0 kHz
rms
CAPACITANCE CASE
at
at
PART NUMBER*
(µF)
CODE
+ 25 °C
120 Hz
- 55 °C
120 Hz
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
+ 125 °C
6 WVDC at + 85 °C . . . ꢁ WVDC at + 125 °C . . . 3.6 WVDC at + 200 °C
220
560
820
1200
1500
2200
C
F
F
T
T
K
135D227X0006C2
135D567X0006F2
135D827X0006F2
135D128X0006T2
135D158X0006T2
135D228X0006K2
3.0
2.5
2.5
1.5
1.5
1.0
36
21
18
18
18
13
2
3
3
5
5
6
9
9
14
18
20
24
- 64
- 77
- 88
- 88
- 90
- 90
+ 13
+ 16
+ 16
+ 20
+ 20
+ 25
+ 16
+ 20
+ 20
+ 25
+ 25
+ 30
1000
1500
1500
1900
1900
2300
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . ꢁ.8 WVDC at + 200 °C
180
680
1500
1800
C
F
T
K
135D187X0008C2
135D687X0008F2
135D158X0008T2
135D188X0008K2
3.0
2.5
1.5
1.0
45
22
18
14
2
3
5
7
9
- 60
- 83
- 90
- 90
+ 13
+ 16
+ 20
+ 25
+ 16
+ 20
+ 25
+ 30
1000
1500
1900
2300
14
20
25
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C
120
150
390
560
1200
1500
C
C
F
F
T
K
135D127X0010C2
135D157X0010C2
135D397X0010F2
135D567X0010F2
135D128X0010T2
135D158X0010K2
3.2
3.0
2.5
2.5
1.5
1.0
54
54
27
27
18
15
2
2
3
3
5
7
6
9
9
16
20
25
- 40
- 55
- 66
- 77
- 88
- 88
+ 14
+ 13
+ 16
+ 16
+ 20
+ 25
+ 16
+ 16
+ 20
+ 20
+ 25
+ 30
900
900
1450
1450
1850
2300
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C
82
100
270
390
680
820
1000
C
C
F
F
T
T
K
135D826X0015C2
135D107X0015C2
135D277X0015F2
135D397X0015F2
135D687X0015T2
135D827X0015T2
135D108X0015K2
3.9
3.9
2.5
2.5
1.8
1.8
1.2
72
72
31
31
22
22
17
2
2
3
3
6
6
8
6
9
9
16
18
24
32
- 35
- 44
- 62
- 66
- 74
- 77
- 77
+ 12
+ 13
+ 16
+ 16
+ 20
+ 20
+ 25
+ 16
+ 16
+ 15
+ 20
+ 25
+ 25
+ 30
900
900
1450
1450
1800
1800
2330
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C
56
68
C
C
F
F
T
T
K
135D566X0025C2
135D686X0025C2
135D187X0025F2
135D277X0025F2
135D477X0025T2
135D567X0025T2
135D687X0025K2
4.3
4.3
2.7
2.7
1.8
1.8
1.2
90
90
33
33
24
24
19
2
2
3
3
6
7
8
6
9
9
16
18
28
32
- 25
- 40
- 54
- 62
- 65
- 72
- 72
+ 12
+ 12
+ 13
+ 13
+ 18
+ 20
+ 25
+ 15
+ 15
+ 15
+ 16
+ 25
+ 25
+ 30
850
850
180
270
470
560
680
1400
1400
1750
1750
2100
Note
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
Document Number: 40024
Revision: 10-Oct-08
For technical questions, contact: tantalum@vishay.com
www.vishay.com
45
135D
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
Vishay
EXTENDED RATINGS
MAX. ESR MAX. IMP.
MAX. DCL (µA)
at
MAX. CAPACITANCE CHANGE
(%) at
MAX.
RIPPLE
ꢁ0 kHz
rms
CAPACITANCE CASE
at
at
PART NUMBER*
(µF)
CODE
+ 25 °C
120 Hz
- 55 °C
120 Hz
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
+ 125 °C
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C. . . 18 WVDC at + 200 °C
47
C
C
F
F
T
T
K
135D476X0030C2
135D566X0030C2
135D157X0030F2
135D227X0030F2
135D397X0030T2
135D477X0030T2
135D567X0030K2
5.2
5.2
2.5
2.5
1.8
1.8
1.3
100
100
36
2
2
3
3
6
8
9
6
9
- 23
- 38
- 42
- 60
- 55
- 65
- 65
+ 12
+ 12
+ 13
+ 13
+ 18
+ 20
+ 25
+ 15
+ 15
+ 15
+ 16
+ 25
+ 25
+ 30
800
800
56
150
220
390
470
560
9
1200
1200
1500
1500
2000
36
16
18
32
36
25
25
20
35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C
39
C
F
T
K
135D396X0035C2
135D127X0035F2
135D337X0035T2
135D477X0035K2
4.1
2.5
1.8
1.3
61
31
20
15
2
3
6
9
6
- 22
- 40
- 50
- 60
+ 12
+ 13
+ 16
+ 25
+ 14
+ 15
+ 25
+ 30
820
120
330
370
10
18
36
1315
1640
2040
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C
33
C
F
F
T
K
135D336X0050C2
135D107X0050F2
135D127X0050F2
135D277X0050T2
135D337X0050K2
5.0
2.8
2.5
2.0
1.5
135
49
2
4
4
8
9
9
- 29
- 36
- 42
- 46
- 46
+ 10
+ 13
+ 12
+ 20
+ 25
+ 12
+ 15
+ 15
+ 25
+ 30
700
100
120
270
330
12
24
32
36
1200
1200
1450
1900
49
30
30
60 WVDC at + 85 °C . . . ꢁ0 WVDC at + 125 °C . . . 36 WVDC at + 200 °C
18
27
C
C
F
F
T
K
135C186X0060C2
135D276X0060C2
135D826X0060F2
135D107X0060F2
135D227X0060T2
135D277X0060K2
7.0
5.0
2.9
2.5
1.8
1.4
160
144
54
2
3
4
4
8
9
12
12
16
20
32
36
- 20
- 24
- 30
- 36
- 40
- 45
+ 7
+ 8
700
700
+ 10
+ 15
+ 12
+ 16
+ 20
+ 12
+ 15
+ 15
+ 20
+ 25
82
1100
1100
1400
1850
100
220
270
54
29
23
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . ꢁ5 WVDC at + 200 °C
22
68
C
F
F
T
K
135D226X0075C2
135D686X0075F2
135D826X0075F2
135D187X0075T2
135D227X0075K2
5.1
3.0
2.5
2.2
1.8
157
63
3
4
12
16
24
36
40
- 19
- 25
- 30
- 35
- 40
+ 10
+ 12
+ 12
+ 16
+ 20
+ 12
+ 15
+ 15
+ 20
+ 25
600
1000
1000
1300
1800
82
63
4
180
220
30
9
24
10
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C
10
39
C
F
T
K
135D106X0100C2
135D396X0100F2
135D686X0100T2
135D127X0100K2
5.9
3.5
2.2
2.7
200
80
3
5
12
24
40
48
- 17
- 20
- 30
- 35
+ 10
+ 12
+ 14
+ 15
+ 12
+ 15
+ 16
+ 17
800
1300
1600
2000
68
40
10
12
120
30
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C
6.8
27
47
68
82
C
F
T
K
K
135D685X0125C2
135D276X0125F2
135D476X0125T2
135D686X0125K2
135D826X0125K2
11.7
3.5
2.2
2.2
2.8
300
90
3
12
24
40
44
48
- 14
- 18
- 26
- 28
- 30
+ 10
+ 12
+ 14
+ 15
+ 15
+ 12
+ 15
+ 16
+ 16
+ 17
700
5
1200
1500
1850
1900
50
10
11
12
32
32
Note
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
www.vishay.com
46
For technical questions, contact: tantalum@vishay.com
Document Number: 40024
Revision: 10-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
135D686X0030F2
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY
135D686X0030F2E3
Tantalum Capacitor, Polarized, Tantalum (wet), 30V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D686X0035F2
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY
135D686X0035F2E3
Tantalum Capacitor, Polarized, Tantalum (wet), 35V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D686X0060T2
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY
135D686X0060T2E3
Tantalum Capacitor, Polarized, Tantalum (wet), 60V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D686X0075F2
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY
135D686X0100T2
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY
135D686X0125K2
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY
135D686X9025C6
Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 10% +Tol, 10% -Tol, 68uF, Through Hole Mount, AXIAL LEADED
VISHAY
135D686X9035F6
Tantalum Capacitor, Polarized, Tantalum (wet), 35V, 10% +Tol, 10% -Tol, 68uF, Through Hole Mount, AXIAL LEADED
VISHAY
135D686X9100T2
Tantalum Capacitor, Polarized, Tantalum (wet), 100V, 10% +Tol, 10% -Tol, 68uF, Through Hole Mount, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明