136D306X0006C3E3 [VISHAY]
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum;型号: | 136D306X0006C3E3 |
厂家: | VISHAY |
描述: | Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum |
文件: | 总7页 (文件大小:109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
136D
Vishay
www.vishay.com
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for -55 °C to +125 °C Operation, Low ESR
FEATURES
• Military specification MIL-PRF-39006/30 and
39006/31. model 136D capacitors are
commercial equivalents of military style
Available
CLR90 and CLR91
Available
• Capacitors to meet the MIL-specs must be
ordered by M39006 part numbers shown in
the relative specification
Available
• Axial through-hole terminations: standard tin /
lead (SnPb), 100 % tin (RoHS-compliant) available
• Standard and extended ratings
• Low ESR
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
Following life test:
(to +125 °C with voltage derating)
1. DCL, measured at +85 °C rated voltage, shall not be in
excess of the original requirement.
Capacitance Tolerance: at 120 Hz, +25 °C.
20 %
standard. 10 %, 5 % available as special.
2. The equivalent series resistance shall not exceed 150 %
of the initial requirement.
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings Tables.
3. Change in capacitance shall not exceed 10 % from the
initial measurement.
Life Test: capacitors are capable of withstanding a 2000 h
life test at a temperature of +85 °C or +125 °C at the
applicable rated DC working voltage.
ORDERING INFORMATION
136D
306
X0
006
C
2
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE CODE
STYLE NUMBER
RoHS-
COMPLIANT
This is expressed
in picofarads. The
first two digits
are the significant
figures. The third
is the number of
zeros to follow
X0 = 20 %
X9 = 10 %
X5 = 5 %
This is expressed in
volts. To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V)
See Ratings
and Case
Codes table
Std. temperature
(max. +125 °C)
0 = no insulating
sleeve
E3 = 100 % tin
termination
(RoHS-compliant
design)
Blank = SnPb
termination
(standard
2 = polyester
insulation sleeve
3 = high temperature
film insulation
design)
Note
•
Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the
unit weight.
Revision: 05-Dec-14
Document Number: 40132
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
Vishay
www.vishay.com
DIMENSIONS in inches [millimeters]
D
E
L1
E
0.0253 0.002 ꢀ0.ꢁ6 0.05ꢂ ]ia.
(NO. 22 AWG tinned nickel leads
solderable and weldable)
Weld
Tantalum
L2
WEIGHT
(g)
CASE DCLR 90 / 91
D
L2
L1
E
CODE
EQUIV.
T1
(Max.)
(Max.)
0.188 0.016
[4.78 0.41]
0.453 + 0.031 / - 0.016
[11.51 + 0.79 / - 0.41]
0.734
[18.64]
1.500 0.250
[38.10 6.35]
C
F
2.6
6.2
0.281 0.016
[7.14 0.41]
0.641 + 0.031 / - 0.016
[16.28 + 0.79 / - 0.41]
0.922
[23.42]
2.250 0.250
[57.15 6.35]
T2
0.375 0.016
[9.53 0.41]
0.766 + 0.031 / - 0.016
[19.46 + 0.79 / - 0.41]
1.047
2.250 0.250
[57.15 6.35]
T
T3
11.6
17.7
[26.59]
0.375 0.016
[9.53 0.41]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
1.343
[34.11]
2.250 0.250
[57.15 6.35]
K
T4
Note
•
For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body.
STANDARD RATINGS
MAX. DCL (μA)
AT
MAX. CAPACITANCE CHANGE
(%) AT
MAX.
RIPPLE
40 kHz
IRMS
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
CAPACITANCE CASE
PART NUMBER (1)
(μF)
CODE
120 Hz
120 Hz
+85 °C
+25 °C
-55 °C
+85 °C
+125 °C
()
()
+125 °C
(mA)
6 VDC AT +85 °C; 4 VDC AT +125 °C
30
68
C
C
F
F
T
T
K
136D306X0006C2
136D686X0006C2
136D147X0006F2
136D277X0006F2
136D337X0006T2
136D567X0006T2
136D128X0006K2
1.99
1.58
0.99
1.11
0.73
0.65
0.50
100
60
40
25
20
25
20
1
1
1
1
2
2
3
2
2
-40
-40
-40
-44
-44
-64
-80
+10.5
+14
+12
+16
+16
+20
+16
+20
+25
820
960
140
270
330
560
1200
3
+14
1200
1375
1800
1900
2265
6.5
7.9
13
14
+17.5
+14
+17.5
+25
8 VDC AT +85 °C; 5 VDC AT +125 °C
25
C
C
F
F
T
T
K
136D256X0008C2
136D566X0008C2
136D127X0008F2
136D227X0008F2
136D297X0008T2
136D437X0008T2
136D857X0008K2
1.99
1.66
1.11
1.12
0.78
0.71
0.47
100
59
50
30
25
25
22
1
1
1
1
2
2
4
2
2
-40
-40
-44
-44
-64
-64
-80
+10.5
+14
+12
+16
+20
+20
+20
+20
+25
820
900
56
120
220
290
430
850
2
+17.5
+17.5
+17.5
+17.5
+25
1230
1370
1770
1825
2330
7
6
14
16
10 VDC AT +85 °C; 7 VDC AT +125 °C
20
C
C
F
F
T
T
K
136D206X0010C2
136D476X0010C2
136D107X0010F2
136D187X0010F2
136D257X0010T2
136D397X0010T2
136D757X0010K2
1.99
1.84
0.99
1.11
0.80
0.75
0.44
175
100
60
1
1
1
1
2
2
4
2
2
-32
-36
-36
-36
-40
-64
-80
+10.5
+14
+12
+16
+16
+16
+16
+20
+25
820
855
47
100
180
250
390
750
4
+14
1200
1365
1720
1800
2360
40
7
+14
30
10
16
16
+14
25
+17.5
+25
23
Note
(1)
Part numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
Revision: 05-Dec-14
Document Number: 40132
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
Vishay
www.vishay.com
STANDARD RATINGS
MAX. DCL (μA)
AT
MAX. CAPACITANCE CHANGE
(%) AT
MAX.
RIPPLE
40 kHz
IRMS
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
CAPACITANCE CASE
PART NUMBER (1)
(μF)
CODE
120 Hz
120 Hz
+85 °C
+25 °C
-55 °C
+85 °C
+125 °C
()
()
+125 °C
(mA)
15 VDC AT +85 °C; 10 VDC AT +125 °C
15
33
C
C
F
F
T
T
K
136D156X0015C2
136D336X0015C2
136D706X0015F2
136D127X0015F2
136D177X0015T2
136D277X0015T2
136D547X0015K2
1.99
1.66
1.11
1.12
0.78
0.71
0.47
155
90
75
50
35
30
23
1
1
1
1
2
2
6
2
2
-24
-28
-28
-28
-32
-56
-80
+10.5
+14
+12
+16
+16
+20
+16
+20
+25
780
820
70
4
+14
1150
1450
1480
1740
2330
120
170
270
540
7
+17.5
+14
10
16
24
+17.5
+25
25 VDC AT +85 °C; 15 VDC AT +125 °C
10
22
C
C
F
F
T
T
K
136D106X0025C2
136D226X0025C2
136D506X0025F2
136D107X0025F2
136D127X0025T2
136D187X0025T2
136D357X0025K2
2.66
1.99
1.46
0.99
1.16
0.96
0.67
220
140
70
1
1
1
1
2
2
7
2
2
-16
-20
-28
-28
-32
-48
-70
+8
+10.5
+13
+13
+13
+13
+25
+9
715
800
+12
+15
+15
+15
+15
+25
50
2
1130
1435
1450
1525
1970
100
120
180
350
50
10
6
38
32
18
28
24
30 VDC AT +85 °C; 20 VDC AT +125 °C
8
C
C
F
F
T
T
K
136D805X0030C2
136D156X0030C2
136D406X0030F2
136D686X0030F2
136D107X0030T2
136D157X0030T2
136D307X0030K2
3.32
2.21
1.66
1.27
1.13
1.02
0.69
275
175
65
1
1
1
1
2
2
8
2
2
-16
-20
-24
-24
-28
-48
-60
+8
+12
+12
+12
+15
+12
+15
+25
640
780
15
+10.5
+10.5
+13
40
5
1120
1285
1450
1525
1950
68
60
8
100
150
300
40
12
18
32
+10.5
+13
35
25
+25
35 VDC AT +85 °C; 22 VDC AT +125 °C
15
68
C
F
136D156X0035C2
136D686X0035F2
136D277X0035K2
3.10
1.45
0.70
175
60
0.75
1
1.5
2
-20
-24
-58
+10.5
+13
+12
+15
+25
660
1195
1950
270
K
26
3
12
+25
50 VDC AT +85 °C; 30 VDC AT +125 °C
5
10
25
47
60
82
160
C
C
F
F
T
T
K
136D505X0050C2
136D106X0050C2
136D256X0050F2
136D476X0050F2
136D606X0050T2
136D826X0050T2
136D167X0050K2
3.98
2.66
2.13
1.56
1.33
1.22
0.71
400
250
95
1
1
1
1
2
2
8
2
2
-16
-24
-20
-28
-16
-32
-50
+5
+8
+6
580
715
+9
5
+10.5
+13
+12
+15
+12
+15
+25
1005
1155
1335
1400
1900
70
9
45
12
16
32
+10.5
+13
45
27
+25
Note
(1)
Part numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
Revision: 05-Dec-14
Document Number: 40132
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
Vishay
www.vishay.com
STANDARD RATINGS
MAX. DCL (μA)
AT
MAX. CAPACITANCE CHANGE
(%) AT
MAX.
RIPPLE
40 kHz
IRMS
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
CAPACITANCE CASE
PART NUMBER (1)
(μF)
CODE
120 Hz
120 Hz
+85 °C
+25 °C
-55 °C
+85 °C
+125 °C
()
()
+125 °C
(mA)
60 VDC AT +85 °C; 40 VDC AT +125 °C
4
C
C
F
F
T
T
K
136D405X0060C2
136D825X0060C2
136D206X0060F2
136D396X0060F2
136D506X0060T2
136D686X0060T2
136D147X0060K2
4.65
3.24
2.32
1.70
1.33
1.27
0.76
550
275
105
90
1
1
1
1
2
2
8
2
2
-16
-24
-16
-28
-16
-32
-40
+5
+8
+6
525
625
8.2
20
+9
5
+8
+12
+12
+12
+15
+20
930
39
9
+10.5
+10.5
+10.5
+20
1110
1330
1365
1850
50
50
12
16
32
68
50
140
28
75 VDC AT +85 °C; 50 VDC AT +125 °C
3.5
6.8
15
C
C
F
F
T
T
K
136D355X0075C2
136D685X0075C2
136D156X0075F2
136D336X0075F2
136D406X0075T2
136D566X0075T2
136D117X0075K2
4.74
3.42
2.66
2.01
1.50
1.31
0.73
650
300
150
90
1
1
1
1
2
2
9
2
2
-16
-20
-16
-24
-16
-28
-35
+5
+6
+9
525
610
+8
5
+10.5
+10.5
+10.5
+10.5
+20
+9
890
33
10
12
17
36
+15
+12
+15
+20
1000
1250
1335
1850
40
60
56
60
110
29
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.5
4.7
11
22
25
30
43
56
86
C
C
F
F
T
T
T
K
K
136D255X0100C2
136D475X0100C2
136D116X0100F2
136D226X0100F2
136D256X0100T2
136D306X0100T2
136D436X0100T2
136D566X0100K2
136D866X0100K2
5.31
4.24
3.02
2.26
1.60
1.55
1.31
0.80
0.77
950
500
200
100
93
1
1
4
2
-16
-16
-16
-16
-16
-16
-20
-25
-25
+8
+7
+8
+8
505
565
1
4
+7
+8
835
1
9
+7
+8
965
2
13
12
17
40
36
+7
+8
1200
1240
1335
1800
1800
80
2
+8
+8
70
2
+8
+8
32
10
9
+15
+15
+15
+15
30
125 VDC AT +85 °C; 85 VDC AT +125 °C
1.7
3.6
9
C
C
F
F
T
T
K
136D175X0125C2
136D365X0125C2
136D905X0125F2
136D146X0125F2
136D186X0125T2
136D256X0125T2
136D566X0125K2
7.81
4.98
3.69
2.85
1.85
1.59
0.77
1250
600
240
167
129
93
1
1
2
2
-16
-16
-16
-16
-16
-16
-25
+7
+7
+8
+8
415
520
1
5
+7
+8
755
14
18
25
56
1
7
+7
+8
860
2
9
+7
+8
1130
1200
1800
2
13
40
+7
+8
32
10
+15
+15
Note
(1)
Part numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
Revision: 05-Dec-14
Document Number: 40132
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
Vishay
www.vishay.com
EXTENDED RATINGS
MAX. DCL (μA)
AT
MAX. CAPACITANCE CHANGE
(%) AT
MAX.
RIPPLE
40 kHz
IRMS
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
CAPACITANCE CASE
PART NUMBER (1)
(μF)
CODE
120 Hz
120 Hz
+85 °C
+25 °C
-55 °C
+85 °C
+125 °C
()
()
+125 °C
(mA)
6 VDC AT +85 °C; 4 VDC AT +125 °C
220
560
C
F
F
T
T
K
136D227X0006C2
136D567X0006F2
136D827X0006F2
136D128X0006T2
136D158X0006T2
136D228X0006K2
1.50
1.25
1.25
0.75
0.75
0.50
36
21
18
18
18
13
2
3
3
5
5
6
9
-64
-77
-88
-88
-90
-90
+13
+16
+16
+20
+20
+25
+16
+20
+20
+25
+25
+30
1000
1500
1500
1900
1900
2300
9
820
14
18
20
24
1200
1500
2200
8 VDC AT +85 °C; 5 VDC AT +125 °C
180
680
C
F
136D187X0008C2
136D687X0008F2
136D158X0008T2
136D188X0008K2
1.50
1.25
0.75
0.50
45
22
18
14
2
3
5
7
9
-60
-83
-90
-90
+13
+16
+20
+25
+16
+20
+25
+30
1000
1500
1900
2300
14
20
25
1500
1800
T
K
10 VDC AT +85 °C; 7 VDC AT +125 °C
120
150
C
C
F
136D127X0010C2
136D157X0010C2
136D397X0010F2
136D567X0010F2
136D128X0010T2
136D158X0010K2
1.60
1.50
1.25
1.25
0.75
0.50
54
54
27
27
18
15
2
2
3
3
5
7
6
9
-40
-55
-66
-77
-88
-88
+14
+13
+16
+16
+20
+25
+16
+16
+20
+20
+25
+30
900
900
390
9
1450
1450
1850
2300
560
F
16
20
25
1200
1500
T
K
15 VDC AT +85 °C; 10 VDC AT +125 °C
82
100
270
390
680
820
1000
C
C
F
F
T
T
K
136D826X0015C2
136D107X0015C2
136D277X0015F2
136D397X0015F2
136D687X0015T2
136D827X0015T2
136D108X0015K2
0.95
0.95
1.25
1.25
0.90
0.90
0.60
72
72
31
31
22
22
17
2
2
3
3
6
6
8
6
9
-35
-44
-62
-66
-74
-77
-77
+12
+13
+16
+16
+20
+20
+25
+16
+16
+15
+20
+25
+25
+30
900
900
9
1450
1450
1800
1800
2330
16
18
24
32
25 VDC AT +85 °C; 15 VDC AT +125 °C
47
56
C
C
C
F
136D476X0025C2
136D566X0025C2
136D686X0025C2
136D187X0025F2
136D277X0025F2
136D477X0025T2
136D567X0025T2
136D687X0025K2
2.60
2.15
2.15
1.35
1.35
0.90
0.90
0.60
100
90
90
33
33
24
24
19
2
2
2
3
3
6
7
8
6
6
-23
-25
-40
-54
-62
-65
-72
-72
+12
+12
+12
+13
+13
+18
+20
+25
+15
+15
+15
+15
+16
+25
+25
+30
800
850
68
9
850
180
270
470
560
680
9
1400
1400
1750
1750
2100
F
16
18
28
32
T
T
K
30 VDC AT +85 °C; 20 VDC AT +125 °C
47
C
C
F
F
T
T
K
136D476X0030C2
136D566X0030C2
136D157X0030F2
136D227X0030F2
136D397X0030T2
136D477X0030T2
136D567X0030K2
2.60
2.60
1.25
1.25
0.90
0.90
0.65
100
100
36
2
2
3
3
6
8
9
6
9
-23
-38
-42
-60
-55
-65
-65
+12
+12
+13
+13
+18
+20
+25
+15
+15
+15
+16
+25
+25
+30
800
800
56
150
220
390
470
560
9
1200
1200
1500
1500
2000
36
16
18
32
36
25
25
20
Note
(1)
Part numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
Revision: 05-Dec-14
Document Number: 40132
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
Vishay
www.vishay.com
EXTENDED RATINGS
MAX. DCL (μA)
AT
MAX. CAPACITANCE CHANGE
(%) AT
MAX.
RIPPLE
40 kHz
IRMS
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
CAPACITANCE CASE
PART NUMBER (1)
(μF)
CODE
120 Hz
120 Hz
+85 °C
+25 °C
-55 °C
+85 °C
+125 °C
()
()
+125 °C
(mA)
35 VDC AT +85 °C; 22 VDC AT +125 °C
39
C
F
136D396X0035C2
136D127X0035F2
136D337X0035T2
136D377X0035K2
2.05
1.25
0.90
0.65
61
31
20
15
2
3
6
9
6
-22
-40
-50
-60
+12
+13
+16
+25
+14
+15
+25
+30
820
120
330
370
10
18
36
1315
1640
2040
T
K
40 VDC AT +85 °C; 25 VDC AT +125 °C
2.05 61
50 VDC AT +85 °C; 30 VDC AT +125 °C
39
C
136D396X0040C2
2
6
-22
+12
+14
820
33
C
F
F
T
K
136D336X0050C2
136D107X0050F2
136D127X0050F2
136D277X0050T2
136D337X0050K2
2.50
1.40
1.25
1.00
0.75
135
49
49
30
30
2
4
4
8
9
9
-29
-36
-42
-46
-46
+10
+13
+12
+20
+25
+12
+15
+15
+25
+30
700
100
120
270
330
12
24
32
36
1200
1200
1450
1900
60 VDC AT +85 °C; 40 VDC AT +125 °C
18
27
C
C
F
136D186X0060C2
136D276X0060C2
136D826X0060F2
136D107X0060F2
136D227X0060T2
136D277X0060K2
136D337X0060K2
3.50
2.51
1.45
1.25
0.90
0.70
0.65
160
144
54
2
3
12
12
16
20
32
36
40
-20
-24
-30
-36
-40
-45
-72
+7
+8
700
700
+10
+15
+12
+16
+20
+25
+12
+15
+15
+20
+25
+25
82
4
1100
1100
1400
1850
1850
100
220
270
330
F
54
4
T
29
8
K
K
23
9
31
10
63 VDC AT +85 °C; 40 VDC AT +125 °C
1.25 54 12
75 VDC AT +85 °C; 50 VDC AT +125 °C
100
F
136D107X0063F2
2
-36
+12
+15
1100
12
22
C
C
F
136D126X0075C2
136D226X0075C2
136D686X0075F2
136D826X0075F2
136D187X0075T2
136D227X0075K2
136D307X0075K2
2.55
2.57
1.50
1.23
0.90
1.12
0.90
157
157
63
3
3
12
12
16
24
36
40
48
-19
-19
-25
-30
-35
-40
-60
+10
+10
+12
+12
+16
+20
+22
+12
+12
+15
+15
+20
+25
+22
600
600
68
4
1000
1000
1300
1800
2000
82
F
63
4
180
220
300
T
30
9
K
K
24
10
12
32
100 VDC AT +85 °C; 65 VDC AT +125 °C
10
39
C
F
T
T
K
136D106X0100C2
136D396X0100F2
136D566X0100T2
136D686X0100T2
136D127X0100K2
2.99
1.77
1.22
1.11
1.38
200
80
50
40
30
3
5
12
24
20
40
48
-17
-20
-25
-30
-35
+10
+12
+12
+14
+15
+12
+15
+12
+16
+17
800
1300
1400
1600
2000
56
5
68
10
12
120
125 VDC AT +85 °C; 85 VDC AT +125 °C
6.8
27
47
56
68
82
C
F
T
T
K
K
136D685X0125C2
136D276X0125F2
136D476X0125T2
136D566X0125T2
136D686X0125K2
136D826X0125K2
5.86
1.77
1.12
1.11
1.10
1.41
300
90
50
50
32
32
3
12
24
40
40
44
48
-14
-18
-26
-26
-28
-30
+10
+12
+14
+14
+15
+15
+12
+15
+16
+16
+16
+17
700
5
1200
1500
1500
1850
1900
10
10
11
12
Note
(1)
Part numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
Revision: 05-Dec-14
Document Number: 40132
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明