15005-01KS [VISHAY]
Wet Tantalum Capacitors, Ultra-High Capacitance, Tantalum Case;
| 型号： | 15005-01KS |
| 厂家： | 
VISHAY |
| 描述： | Wet Tantalum Capacitors, Ultra-High Capacitance, Tantalum Case |
| 文件： | 总4页 (文件大小：108K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DLA 15005
www.vishay.com
Vishay
Wet Tantalum Capacitors, Ultra-High Capacitance, Tantalum Case
with Glass-to-Tantalum Hermetic Seal for -55 °C to +125 °C,
DLA Approved
FEATURES
• Enhanced performance, high reliability design
• Terminations: axial, standard tin / lead (Sn / Pb),
100 ꢀ tin available
• The 15005 tantalum-case electrolytic capacitors provide
all the advantages of Vishay’s SuperTan® series devices,
while offering improved reverse voltage and vibration
capability
• Increased thermal shock capability of 300 cycles
PERFORMANCE CHARACTERISTICS
• Designed for the avionics and aerospace applications
Refer to: Typical Performance Characteristics
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Capacitance Tolerance: 10 ꢀ, 20 ꢀ standard
DC Leakage Current (DCL Max.): at +25 °C and above,
leakage current shall not exceed the values listed in the
Standard Ratings table.
ORDERING INFORMATION
15005
-01
K
S
DLA DRAWING NUMBER
DASH NUMBER
CAPACITANCE TOLERANCE
K = 10 ꢀ
M = 20 ꢀ
S = sleeved
U = unsleeved
DLA LAND AND MARITIME
Drawing no.
15005
COLUMBUS, OHIO
DIMENSIONS in inches [millimeters]
Terminal welded
0.025 0.002
(0.64 0.05)
to case
0.250 (6.35)
Max.
0.094 (2.38)
Max.
Terminal location
within 0.031 of center
“D” Dia.
L1
E
E
L1 UNINSULATED
+0.031 [0.79]
-0.016 [0.41]
D
D MAX. INSULATED
(DIA.)
E
CASE CODE
0.016 [0.41]
0.250 [6.35] MAX.
T1
T2
T3
T4
0.188 [4.78]
0.281 [7.14]
0.375 [9.52]
0.375 [9.52]
0.219 [5.56]
0.312 [7.92]
0.406 [10.31]
0.406 [10.31]
0.453 [11.51]
0.641 [16.28]
0.766 [19.46]
1.062 [26.97]
1.500 [38.10]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
Note
Insulation sleeving will lap over the ends of the capacitor body.
•
Revision: 09-Dec-16
Document Number: 40193
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DLA 15005
www.vishay.com
Vishay
STANDARD RATINGS
MAX. DCL
(μA)
MAX. CAPACITANCE
AC
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
CHANGE (%)
RIPPLE
+85 °C
40 kHz
CAPACITANCE CASE
PART NUMBER
+85 °C
(μF)
CODE
120 Hz
120 Hz
+25 °C
AND
-55 °C +85 °C +125 °C
()
()
(mARMS
)
+125 °C
75 VDC AT 85 °C, 50 VDC AT 125 °C
1000
1000
T4
T4
15005-15(1)(2)
15005-65(1)(2)
0.50
0.35
8
8
20
20
200
200
-80
-80
12
12
20
20
3500
3500
100 VDC AT 85 °C, 65 VDC AT 125 °C
0.70 10 25
470
T4
15005-20(1)(2)
250
-50
10
25
3500
Note
Part number definitions:
(1) Capacitance tolerance: K = 10 ꢀ, M = 20 ꢀ
(2) Case or body insulation: S = sleeved; U = unsleeved
•
RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIES PEAK VOLTAGE
FREQUENCY OF
APPLIED RIPPLE
CURRENT
120 Hz
800 Hz
1 kHz
10 kHz
40 kHz
100 kHz
AMBIENT STILL
AIR TEMP. IN °C
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
100 ꢀ 0.60 0.39
90 ꢀ 0.60 0.46
80 ꢀ 0.60 0.52 0.35
70 ꢀ 0.60 0.58 0.44
-
-
-
-
-
-
0.71 0.43
0.71 0.55
0.71 0.62 0.42
0.71 0.69 0.52
-
-
-
-
-
-
0.72 0.46
0.72 0.55
0.72 0.62 0.42
0.72 0.70 0.52
-
-
-
-
-
-
0.88 0.55
0.88 0.67
0.88 0.76 0.52
0.88 0.85 0.64
-
-
-
-
-
-
1.0 0.63
1.0 0.77
1.0 0.87 0.59
1.0 0.97 0.73
-
-
-
-
-
-
1.1 0.69
1.1 0.85
1.1 0.96 0.65
1.1 1.07 0.80
-
-
-
-
-
-
% of
85 °C
rated
peak
voltage
66 2/3 ꢀ 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50
TYPICAL PERFORMANCE CHARACTERISTICS OF DLA 15005 CAPACITORS
ELECTRICAL CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
-55 °C to +85 °C (to +125 °C with voltage derating)
20 ꢀ, 10 ꢀ at 120 Hz, at +25 °C
Operating temperature range
Capacitor tolerance
Capacitor change by temperature
ESR
Limit per Standard Ratings table
Limit per Standard Ratings table, at +25 °C, 120 Hz
Limit per Standard Ratings table, at -55 °C, 120 Hz
Limit per Standard Ratings table
Impedance
DCL (leakage current)
AC ripple current
Reverse voltage
Limit per Standard Ratings table, at +85 °C and 40 kHz
Reverse voltage shall be in accordance with MIL-PRF-39006, paragraphs 3.23 and 4.8.19, except DC
potential will be maximum of 1.5 V.
Surge voltage
Surge voltage shall be in accordance with MIL-PRF-39006 and DLA 15005.
The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under
any conditions including transients and peak ripple at the highest line voltage.
The DC surge voltage is 115 ꢀ of rated DC voltage.
PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
Life testing
Capacitors shall be capable of withstanding a 2000 h life test at a temperature +85 °C at rated
voltage, or a 2000 h life test at 125 °C test at derated voltage.
After the test, the capacitors shall meet the following requirements:
a) DC leakage at 85 °C and 125 °C shall not exceed 125 ꢀ of the specified value
b) DC leakage at 25 °C shall not exceed the specified value
c) Capacitance shall be within + 10 ꢀ, - 20 ꢀ of initial value
d) ESR shall not exceed 200 ꢀ of the specified value
Revision: 09-Dec-16
Document Number: 40193
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DLA 15005
www.vishay.com
Vishay
ENVIRONMENTAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Seal
MIL-PRF-39006
When the capacitors are tested as specified in MIL-PRF-39006,
there shall be no evidence of leakage.
Moisture resistance
MIL-PRF-39006
Moisture resistance shall be in accordance with MIL-PRF-39006.
Number of cycles: 10 continuous cycles
Barometric pressure
(reduced)
MIL-STD-202, method 105, condition E
Altitude 150 000 feet
MECHANICAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Shock (specified pulse)
MIL-STD-202, method 213, condition I
(100 g)
The capacitors shall meet the requirements of MIL-PRF-39006.
Vibration, high frequency
Random vibration
Thermal shock
MIL-STD-202, method 204, condition E
(50 g peak)
The capacitors shall meet the requirements of MIL-PRF-39006.
MIL-STD-202, method 214, condition II-G The capacitors shall meet the requirements of MIL-PRF-39006.
(overall RMS 27.78 g)
MIL-STD-202, method 107, condition A
Thermal shock shall be in accordance with MIL-PRF-39006 when
tested for 300 cycles.
Solderability
MIL-STD-202, method 208,
ANSI/J-STD-002, test A
Solderability shall be in accordance with MIL-PRF-39006.
Terminal strength
Resistance to solder heat
Terminals
MIL-STD-202, method 211
MIL-STD-202, method 210, condition C
MIL-STD-1276
Terminal strength shall be in accordance with MIL-PRF-39006.
The capacitors shall meet the requirements of MIL-PRF-39006.
Terminals shall be as specified in MIL-STD-1276. The length and
diameter of the terminals shall be as specified in Dimensions table.
All terminals shall be permanently secured internally and
externally, as applicable. All external joints shall be welded.
Marking
MIL-STD-1285
Marking of capacitors conforms to method I of MIL-STD-1285 and
include capacitance (in μF), capacitance tolerance letter, rated
voltage, date code, lot symbol and Vishay trademark.
SELECTOR GUIDES
Tantalum Selector Guide
Parameter Comparison Guide
www.vishay.com/doc?49375
www.vishay.com/doc?42088
Revision: 09-Dec-16
Document Number: 40193
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明