1N6284A-E3/73 [VISHAY]
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, ROHS COMPLIANT, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor;型号: | 1N6284A-E3/73 |
厂家: | VISHAY |
描述: | DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, ROHS COMPLIANT, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor 局域网 二极管 电视 |
文件: | 总6页 (文件大小:110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A
www.vishay.com
Vishay General Semiconductor
®
TRANSZORB Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 1500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
Case Style 1.5KE
• AEC-Q101 qualified
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
VBR uni-directional
BR bi-directional
WM uni-directional
6.8 V to 540 V
V
6.8 V to 440 V
5.8 V to 459 V
5.8 V to 376 V
1500 W
V
VWM bi-directional
MECHANICAL DATA
PPPM
PD
Case: Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3_X - RoHS compliant, and AEC-Q101 qualified
(“X” denotes revision code e.g. A, B, ...)
6.5 W
IFSM (uni-directional only)
TJ max.
200 A
175 °C
Polarity
Uni-directional, bi-directional
1.5KE
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
Package
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Note
•
1.5KE250A to 1.5KE540A and 1.5KE250CA to 1.5KE440CA for
commercial grade only
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use CA suffix (e.g. 1.5KE440CA)
Electrical characteristics apply in both directions.
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
1500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1)
See next table
6.5
A
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only
Maximum instantaneous forward voltage at 100 A for uni-directional only (3)
Operating junction and storage temperature range
PD
W
(2)
IFSM
200
A
VF
3.5/5.0
V
TJ, TSTG
-55 to +175
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
VF = 3.5 V for 1.5KE220A and below; VF = 5.0 V for 1.5KE250A and above
(2)
(3)
Revision: 11-Oct-16
Document Number: 88301
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM MAXIMUM
MAXIMUM
MAXIMUM
VOLTAGE
TEST
STAND-OFF REVERSE
PEAK
PULSE
JEDEC®
TYPE
NUMBER
GENERAL
SEMICONDUCTOR
PART NUMBER
CLAMPING TEMPERATURE
(1)
V
BR AT IT
(V)
CURRENT VOLTAGE
LEAKAGE
AT VWM
VOLTAGE
AT IPPM
VC (V)
COEFFICENT
OF VBR
IT
(mA)
VWM
(V)
CURRENT
(4)
(2)
ID
IPPM
(%/°C)
MIN. MAX.
(μA)
1000
500
200
50
(A)
143
133
124
112
103
96.2
89.8
82.4
70.8
66.7
59.5
54.2
49.0
45.2
40.0
36.2
32.8
30.1
27.8
25.3
23.1
21.4
19.5
17.6
16.3
14.6
13.3
12.0
10.9
9.9
1N6267A
1N6268A
1N6269A
1N6270A
1N6271A
1N6272A
1N6273A
1N6274A
1N6275A
1N6276A
1N6277A
1N6278A
1N6279A
1N6280A
1N6281A
1N6282A
1N6283A
1N6284A
1N6285A
1N6286A
1N6287A
1N6288A
1N6289A
1N6290A
1N6291A
1N6292A
1N6293A
1N6294A
1N6295A
1N6296A
1N6297A
1N6298A
1N6299A
1N6300A
1N6301A
1N6302A
1N6303A
-
(+)1.5KE6.8A
(+)1.5KE7.5A
(+)1.5KE8.2A
(+)1.5KE9.1A
(+)1.5KE10A
(+)1.5KE11A
(+)1.5KE12A
(+)1.5KE13A
(+)1.5KE15A
(+)1.5KE16A
(+)1.5KE18A
(+)1.5KE20A
(+)1.5KE22A
(+)1.5KE24A
(+)1.5KE27A
(+)1.5KE30A
(+)1.5KE33A
(+)1.5KE36A
(+)1.5KE39A
(+)1.5KE43A
(+)1.5KE47A
(+)1.5KE51A
(+)1.5KE56A
(+)1.5KE62A
(+)1.5KE68A
(+)1.5KE75A
(+)1.5KE82A
(+)1.5KE91A
(+)1.5KE100A
(+)1.5KE110A
(+)1.5KE120A
(+)1.5KE130A
(+)1.5KE150A
(+)1.5KE160A
(+)1.5KE170A
(+)1.5KE180A
(+)1.5KE200A
(+)1.5KE220A
1.5KE250A
1.5KE300A
1.5KE350A
1.5KE400A
1.5KE440A
1.5KE480A
1.5KE510A
1.5KE540A
6.45
7.13
7.79
8.65
9.50
10.5
11.4
12.4
14.3
15.2
17.1
19.0
20.9
22.8
25.7
28.5
31.4
34.2
37.1
40.9
44.7
48.5
53.2
58.9
64.6
71.3
77.9
86.5
95.0
105
7.14
7.88
8.61
9.55
10.5
11.6
12.6
13.7
15.8
16.8
18.9
21.0
23.1
25.2
28.4
31.5
34.7
37.8
41.0
45.2
49.4
53.6
58.8
65.1
71.4
78.8
86.1
95.5
105
10
10
10
5.80
6.40
7.02
7.78
8.55
9.40
10.2
11.1
12.8
13.6
15.3
17.1
18.8
20.5
23.1
25.6
28.2
30.8
33.3
36.8
40.2
43.6
47.8
53.0
58.1
64.1
70.1
77.8
85.5
94.0
102
111
128
136
145
154
171
185
214
256
300
342
376
408
434
459
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
104
113
125
137
152
165
179
207
219
234
246
274
328
344
414
482
548
602
658
698
740
0.057
0.061
0.065
0.068
0.073
0.075
0.078
0.081
0.084
0.086
0.089
0.090
0.092
0.094
0.096
0.097
0.098
0.099
0.100
0.101
0.101
0.102
0.103
0.104
0.104
0.105
0.105
0.106
0.106
0.107
0.107
0.107
0.106
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
116
114
126
9.1
8.4
7.2
6.8
6.4
6.1
5.5
4.6
4.4
3.6
3.1
2.7
124
137
143
158
152
168
162
179
171
189
190
210
209
231
-
-
-
-
-
-
-
-
237
263
285
315
333
368
380
420
418
462
2.5
456
504
2.28
2.15
2.03
485
535
513
567
Notes
(1)
(2)
(3)
(4)
(+)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
All terms and symbols are consistent with ANSI/IEEE CA62.35
For bi-directional types with VR 10 V and less the ID limit is doubled
Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number
E136766 for both uni-directional and bi-directional devices
Revision: 11-Oct-16
Document Number: 88301
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
75
UNIT
Typical thermal resistance, junction to ambient
Typical thermal resistance, junction to lead
RJA
°C/ W
RJL
15.4
ORDERING INFORMATION (Example)
PREFERRED PIN
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
1.5KE6.8A-E3/54
0.968
0.968
54
C
1400
1400
13" diameter paper tape and reel
13" diameter paper tape and reel
1.5KE6.8AHE3_A/C (1)(2)
Notes
(1)
AEC-Q101 qualified
Applied for 1.5KE6.8AHE3_A to 1.5KE220AHE3_A, and 1.5KE6.8CAHE3_A to 1.5KE220CAHE3_A
(2)
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10
1
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
Peak Value
IPPM
100
50
0
Half Value -
IPP
2
IPPM
10/1000 µs Waveform
as defined by R.E.A.
td
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1.0
3.0
4.0
0
2.0
td - Pulse Width (s)
t - Time (ms)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Pulse Waveform
100
10 000
Uni-Directional
Bi-Directional
75
50
VR = 0
1000
100
10
V
R = Rated
Stand-Off Voltage
25
0
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0
25
50
75
100
125
150 175
200
5
10
100
500
TJ - Initial Temperature (°C)
VBR - Breakdown Voltage (V)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 4 - Typical Junction Capacitance
Revision: 11-Oct-16
Document Number: 88301
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A
www.vishay.com
Vishay General Semiconductor
8.0
100
Waveform:
1.5KE200
1.5KE130
10/1000 µs Impulse
ΔVC = VC - VBR
7.0
20
10
6.0
5.0
4.0
3.0
1.5KE75
1.5KE39
2.0
1.0
1.5KE33
1.5KE6.8
1.5KE9.1
L = 0.375" (9.5 mm)
Lead Lengths
2.0
1.0
0
0.2
0.1
0.5
1
2
10
50
0
25
50
75
100 125 150
175
200
IPP - Peak Pulse Current (A)
TL - Lead Temperature (°C)
Fig. 5 - Power Derating Curve
Fig. 8 - Incremental Clamping Voltage Curve (Uni-directional)
200
100
100
TJ = TJ max.
8.3 ms Single Half Sine-Wave
:
Waveform
10/1000 µs Impulse
ΔVC = VC - VBR
1.5KE200C
1.5KE75C
20
10
1.5KE39C
1.5KE30C
2.0
1.0
1.5KE15C
11C
1.5KE7.5C
0.2
0.1
10
0.5
1
2
10
20
50
1
10
100
IPP - Peak Pulse Current (A)
Number of Cycles at 60 Hz
Fig. 6 - Maximum Non-Repetitive Forward Surge Current
Fig. 9 - Incremental Clamping Voltage Curve (Bi-directional)
Uni-Directional only
100
100
Waveform:
8/20µs Impulse
Waveform:
8/20µs Impulse
1.5KE200
1.5KE200C
ΔVC = VC - VBR
ΔVC = VC - VBR
1.5KE130
20
20
1.5KE100
1.5KE75C
10
10
1.5KE75
1.5KE39C
1.5KE30C
1.5KE15C
1.5KE39
2
1
2.0
1.5KE33
1.5KE11C
1.0
1.5KE6.8
1.5KE9.1
1.5KE18
1.5KE12
1.5KE7.5C
0.2
0.1
0.2
0.1
0.5
1
2.0
10
20
50
0.5
1
2
10
20
50
IPP - Peak Pulse Current (A)
IPP - Peak Pulse Current (A)
Fig. 7 - Incremental Clamping Voltage Curve (Uni-Directional)
Fig. 10 - Incremental Clamping Voltage Curve (Bi-Directional)
Revision: 11-Oct-16
Document Number: 88301
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A
www.vishay.com
Vishay General Semiconductor
100
10
1
100
10
1
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
0.1
0.1
0.001
0
0.4
0.8
1.2
1.6
2.0
0.01
0.1
1
10
100
1000
Instantaneous Forward Voltage (V)
tp - Pulse Duration (s)
Fig. 11 - Instantaneous Forward Voltage Characteristics Curve
Fig. 12 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Case Style 1.5KE
1.0 (25.4)
MIN.
0.210 (5.3)
0.190 (4.8)
DIA.
0.375 (9.5)
0.285 (7.2)
1.0 (25.4)
MIN.
0.042 (1.07)
0.038 (0.96)
DIA.
APPLICATION NOTES
• This series of Silicon Transient Suppressors is used in
applications where large voltage transients can
permanently damage voltage-sensitive components.
• This Transient Voltage Suppressor diode has a pulse
power rating of 1500 W for 1 ms. The response time of
TVS diode clamping action is effectively instantaneous
(1 x 10-9 s bi-directional); therefore, they can protect
integrated circuits, MOS devices, hybrids, and other
voltage sensitive semiconductors and components. TVS
diodes can also be used in series or parallel to increase
the peak power ratings.
• The TVS diode can be used in applications where
induced lightning on rural or remote transmission
lines presents
a
hazard to electronic circuitry
(ref: R.E.A. specification P.E. 60).
Revision: 11-Oct-16
Document Number: 88301
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
1N6284A-E3/90
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6284A-E3/91
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6284A-HE3/54
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, ROHS COMPLIANT, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6284A.TR
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-201,
SEMTECH
1N6284A/1
Trans Voltage Suppressor Diode, 1500W, 30.8V V(RWM), Unidirectional, 1 Element, Silicon
VISHAY
1N6284A/4
Trans Voltage Suppressor Diode, 1500W, 30.8V V(RWM), Unidirectional, 1 Element, Silicon
VISHAY
1N6284A/4E-E3
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6284A/4F
Trans Voltage Suppressor Diode, 1500W, 30.8V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1N6284A/4F-E3
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6284A/4G
Trans Voltage Suppressor Diode, 1500W, 30.8V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1N6284A/4G-E3
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明