1N6384/1-E3 [VISHAY]
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, 1.5KE, 2 PIN, Transient Suppressor;型号: | 1N6384/1-E3 |
厂家: | VISHAY |
描述: | DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, 1.5KE, 2 PIN, Transient Suppressor 电视 |
文件: | 总3页 (文件大小:56K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ICTE5.0 thru ICTE15C Series
TRANSZORB® Transient Voltage Suppressor
Stand Off Voltage 5.0 to 15V
Peak Pulse Power 1500W
Features
Case Style 1.5KE
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated junction
•
1500W peak pulse power capabililty with a 10/1000µs
waveform, repetition rate (duty cycle): 0.05%
1.0 (25.4)
• Excellent clamping capability
MIN.
• Low incremental surge resistance
• Very fast response time
• Ideal for data and bus line applications
• High temperature soldering guaranteed:
265OC/10 seconds, 0.375” (9.5mm) lead length,
5lbs. (2.3 kg) tension
0.210 (5.3)
0.190 (4.8)
DIA.
0.375 (9.5)
0.285 (7.2)
• Includes 1N6373 thru 1N6385
Mechanical Data
Case: Molded plastic body over passivated junction
Terminals: Plated axial leads, solderable per MIL-
STD-750, Method 2026
1.0 (25.4)
MIN.
Polarity: For unidirectional types the color band
denotes the cathode, which is positive with respect
to the anode under normal TVS operation
0.042 (1.07)
0.038 (0.96)
DIA.
Mounting Position: Any
Weight: 0.045oz., 1.2g
Packaging codes/options:
Dimensions in inches and (millimeters)
1/1K per Bulk Box, 11K/box
4/1.4K per 13” Reel (52mm Tape), 4.2K/box
Maximum Ratings and Thermal Characteristics(TA = 25°C unless otherwise noted)
Parameter
Symbol
Limit
Minimum 1500
See Table 1 & 2
6.5
Unit
W
Peak pulse power dissipation with a 10/1000µs waveform
(Note 1, Fig. 1)
PPPM
Peak pulse current wih a 10/1000µs waveform (Note 1, Fig 3)
IPPM
A
Steady state power dissipation,
TL = 75OC, at lead lengths 0.375” (9.5mm)
PM(AV)
W
Peak forward surge current, 8.3ms
single half sine-wave superimposed on rated load
for unidirectional only (JEDEC Method) (Note 2)
IFSM
200
A
Maximum instantaneous forward voltage
at 100A for unidirectional only
VF
3.5
V
Operating junction and storage temperature range
TJ, TSTG
–55 to +175
OC
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2
(2) 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum
7/6/00
ICTE5.0 thru ICTE15C Series
TRANSZORB® Transient Voltage Suppressor
Electrical Characteristics (JEDEC Registered Data) Table 1 – Unidirectional Types
Ratings at 25°C ambient temperature unless otherwise specified.
Minimum(3)
Breakdown
Voltage
Maximum
Reverse
Leakage
Maximum
Clamping
Voltage
Maximum
Clamping
Voltage
Maximum
Peak
Pulse
Stand-Off
Voltage
General
Semiconductor
Part
JEDEC
Type
at 1.0mA
at V
at l = 1.0A
at l = 10A
Current
WM
PP
PP
V
WM
V(
BR
)
I
D
Vc
Vc
I
PP
Number
Number
(Volts)
(Volts)
(µA)
300
25.0
2.0
(Volts)
(Volts)
(Amps)
160
100
90
1N6373(2)
1N6374
1N6375
1N6376
1N6377
ICTE-5(2)
ICTE-8
5.0
6.0
7.1
7.5
8.0
9.4
11.3
13.7
16.1
20.1
11.5
14.1
16.5
20.6
ICTE-10
ICTE-12
ICTE-15
10.0
12.0
15.0
11.7
14.1
17.6
2.0
70
2.0
60
Electrical Characteristics (JEDEC Registered Data) Table 1 – Bidirectional Types
Ratings at 25°C ambient temperature unless otherwise specified.
Minimum(3)
Breakdown
Voltage
Maximum
Reverse
Leakage
Maximum
Clamping
Voltage
Maximum
Clamping
Voltage
Maximum
Peak
Pulse
Stand-Off
Voltage
General
Semiconductor
Part
JEDEC
Type
at 1.0mA
at V
at l = 1.0A
at l = 10A
Current
WM
PP
PP
V
WM
V(
BR
)
I
D
Vc
Vc
I
PP
Number
1N6382
1N6383
1N6384
1N6385
Number
ICTE-8C
ICTE-10C
ICTE-12C
ICTE-15C
(Volts)
(Volts)
(µA)
50.0
2.0
(Volts)
(Volts)
(Amps)
100
90
8.0
9.4
11.4
14.1
16.7
20.8
11.6
14.5
17.1
21.4
10.0
12.0
15.0
11.7
14.1
17.6
2.0
70
2.0
60
Notes:
(1) “ C “ Suffix indicates bi-directional
(2) ICTE-5 and 1N6373 are not available as bi-directional
(3) The minimum breakdown voltage as shown takes into consideration the ±1 Volt tolerance normally specified for power supply regulation on most integrated
circuit manufacturers data sheets. Please consult factory for devices that require reduced clamping voltages where tighter regulated power supply voltages
are employed.
(4) Clamping Factor: 1.33 at full rated power; 1.20 at 50% rated power; Clamping Factor: the ratio of the actual Vc (Clamping Voltage) to the V(BR) (Breakdown
Voltage) as measured on a specific device.
ICTE5.0 thru ICTE15C Series
TRANSZORB® Transient Voltage Suppressor
Ratings and
Characteristic Curves (TA=25OC unless otherwise noted.)
Fig. 2 -- Pulse Derating Curve
Fig. 1 -- Peak Pulse Power Rating Curve
100
100
Non-repetitive Pulse
Waveform shown in Fig. 3
TA = 25°C
10
75
50
1
0.1
25
0
0.1µs
1.0µs
10µs
100µs
1.0ms
10ms
td -- Pulse Width (sec.)
Fig. 3 -- Pulse Waveform
150
25
50
75
150
175
200
0
100
125
TJ = 25°C
Pulse Width (td) is defined
tr = 10µsec.
TA -- Ambient Temperature (°C)
Peak Value
IPPM
as the point where the
peak current decays to
50% of IPPM
Fig. 4 -- Typical Junction Capacitance
Uni-Directional
100
50
Half Value – IPPM
2
100,000
10,000
1000
10/1000µsec. Waveform
as defined by R.E.A.
Measured at
Zero Bias
td
0
1.0
3.0
4.0
0
TJ = 25°C
f = 1.0MHz
Vsig = 50mVp-p
t -- Time (ms)
Fig. 5 -- Typical Junction Capacitance
Measured at
Stand-Off
Voltage, VWM
Bidirectional Type
100,000
10,000
1,000
100
Measured at
Zero Bias
Non-repetitive Pulse
Waveform shown in Fig. 3
TA = 25°C
100
1.0
10
100
200
V(BR) -- Breakdown Voltage (V)
Measured at
Stand-Off
Voltage, VWM
Fig. 6 -- Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
200
1
10
100
200
TJ = TJ max.
8.3ms Single Half Sine-Wave
(JEDEC Method)
V(BR) -- Breakdown Voltage (V)
Fig. 7 --Typical Characteristics Clamping Voltage
50
100
50
Uni-Directional Only
TA = 25°C
10
1
10
6
8
10
12
14
16
18
20
22
24
1
5
10
50
100
VC -- Clamping Voltage (V)
Number of Cycles at 60 Hz
相关型号:
1N6384/4-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/4E-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/4H-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/51-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/53-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/54-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/56-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/62-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/65-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/66-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
1N6384/70-E3
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1.5KE, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明