222247035393 [VISHAY]
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.039 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT;型号: | 222247035393 |
厂家: | VISHAY |
描述: | CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.039 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT 电容器 |
文件: | 总14页 (文件大小:141K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MKT470
Vishay BCcomponents
Metallized Polyester Film Capacitors
MKT Radial Potted Type
FEATURES
168x12(halfpage)
Pitch ꢀ mm available loose in box, ammopack and
l
w
taped on reel.
Compliant to RoHS Directive 2002/9ꢀ/EC
CAPACITANCE RANGE (E12 SERIES)
h
0.001 µF to 1.2 µF
RATED (DC) VOLTAGE
l
t
63 V; 100 V; 2ꢀ0 V; 400 V
Ød
t
P 0.3
RATED (AC) VOLTAGE
Dimensions in
40 V; 63 V; 160 V; 200 V
APPLICATIONS
CLIMATIC CATEGORY
Blocking, coupling and decoupling. Bypass and energy
reservoir
ꢀꢀ/12ꢀ/ꢀ6
RATED TEMPERATURE
MARKING
8ꢀ C
C-value; tolerance; rated voltage; year and week
of manufacturer; manufacturer’s type designation,
manufacturer’s logo, location
MAXIMUM APPLICATION TEMPERATURE
12ꢀ °C
DIELECTRIC
Polyester film
REFERENCE SPECIFICATIONS
IEC 60384-2
ELECTRODES
Vacuum deposited aluminum
PERFORMANCE GRADE
Grade 1 (long life)
ENCAPSULATION
Flame retardant plastic case and epoxy resin
(UL-class 94 V-0)
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
dc-film@vishay.com
CONSTRUCTION
Wound mono construction
LEADS
Tinned wire
CAPACITANCE TOLERANCE
10 %; ꢀ %
Document Number: 28112
Revision: 26-Apr-11
For technical questions, contact: dc-film@vishay.com
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
TYPE AND PITCHES
470
ꢀ.0 mm
0.1
2
3
4
ꢀ
CAPACITANCE
(numerically)
1
10
100
Example:
104 = 10 x 10 = 100 nF
2222 470 XX XX X
BFC2* 470 XX XX X
* Use this part number for those with access to
the Vishay’s SAP system and Partners
website within the Americas
PREFERRED TYPES
TYPE
PACKAGING
LEAD CONFIGURATION
C-TOL.
10 %
ꢀ %
63 V
7ꢀ
100 V
250 V
3ꢀ
400 V
6ꢀ
8ꢀ
470
ammopack
H 18.ꢀ mm; P0 12.7 mm
76
86
36
66
ON REQUEST
10 %
ꢀ %
11
12
1ꢀ
16
18
19
21
22
2ꢀ
26
28
29
41
42
4ꢀ
46
48
49
ꢀ1
ꢀ2
ꢀꢀ
ꢀ6
ꢀ8
ꢀ9
lead length 4.0 1.0/0.ꢀ mm
lead length 26.0 2.0 mm
loose in box
10 %
ꢀ %
470
10 %
ꢀ %
H 18.ꢀ mm; P0 12.7 mm;
reel diameter 3ꢀ6 mm
taped on reel
Note
• For detailed tape specification refer to packaging information www.vishay.com/doc?27139
SPECIFIC REFERENCE DATA
DESCRIPTION
Tangent of loss angle:
C 0.1 µF
0.1 µF C 0.47 µF
0.47 µF C 1.2 µF
VALUE
at 1 kHz
60 x 10-4
60 x 10-4
60 x 10-4
63 VDC
at 10 kHz
120 x 10-4
120 x 10-4
120 x 10-4
100 VDC
at 100 kHz
at 1 MHz
200 x 10-4
200 x 10-4
-
2ꢀ0 x 10-4 (1)
-
-
Rated voltage pulse slope (dU/dt)R at
2ꢀ0 VDC
400 V/µs
400 VDC
800 V/µs
100 V/µs
160 V/µs
R between leads, for C 0.33 µF:
at 10 V; 1 min
at 100 V; 1 min
RC between leads, for C > 0.33 µF
at 10 V; 1 min
1ꢀ 000 M
ꢀ000 s
1ꢀ 000 M
1ꢀ 000 M
1ꢀ 000 M
at 100 V; 1 min
ꢀ000 s
R between interconnected leads and
casing (foil method)
Withstanding (DC) voltage (cut off current
10 mA) (2); rise time 1000 V/s
Withstanding (DC) voltage between leads
and case
> 30 000 M
100 V; 1 min
200 V; 1 min
> 30 000 M
> 30 000 M
400 V; 1 min
ꢀ00 V; 1 min
> 30 000 M
640 V; 1 min
800 V; 1 min
160 V; 1 min
200 V; 1 min
Notes
(1) Only for 2ꢀ0 V and 400 V for C 0.01 µF
(2) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
www.vishay.com
2
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28112
Revision: 26-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
URdc = 63 V; URac = 40 V
CATALOG NUMBER 2222 470 ... AND PACKAGING
AMMOPACK (2)
REEL (2)
LOOSE IN BOX
DIMENSIONS
W x H x L
(mm)
C
(µF)
MASS (1)
(g)
H 18.5 mm
short leads long leads
C-tol. = 10 %
last 5 digits of
C-tol. = 5 %
last 5 digits of
catalog number catalog number
SPQ
SPQ
SPQ
SPQ
Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm
0.068
0.082
0.1
7ꢀ683
7ꢀ823
7ꢀ104
7ꢀ124
7ꢀ1ꢀ4
7ꢀ184
7ꢀ224
7ꢀ274
7ꢀ334
7ꢀ394
7ꢀ474
7ꢀꢀ64
7ꢀ684
7ꢀ824
7ꢀ10ꢀ
7ꢀ12ꢀ
76683
76823
76104
76124
761ꢀ4
76184
76224
76274
76334
76394
76474
76ꢀ64
76684
76824
7610ꢀ
7612ꢀ
2.ꢀ x 6.ꢀ x 7.2
3.ꢀ x 8.0 x 7.2
0.2ꢀ
2000
2000
2000
1000
0.12
0.1ꢀ
0.18
0.22
0.27
0.33
0.39
0.47
0.ꢀ6
0.68
0.82
1
0.3ꢀ
1ꢀ00
1ꢀ00
2000
1000
4.ꢀ x 9.0 x 7.2
6.0 x 11.0 x 7.2
0.4ꢀ
0.60
1000
7ꢀ0
1000
1000
2000
2000
1000
1000
1.2
Notes
(1) Net weight for short lead product only
(2) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to Packaging Information
SPQ = Standard packing quantity
•
URdc = 100 V; URac = 63 V
CATALOG NUMBER 2222 470 ... AND PACKAGING
AMMOPACK (2)
REEL (2)
LOOSE IN BOX
short leads long leads
DIMENSIONS
W x H x L
(mm)
C
(µF)
MASS (1)
(g)
H 18.5 mm
C-tol. = 10 %
last 5 digits of
C-tol. = 5 %
last 5 digits of
catalog number catalog number
SPQ
SPQ
SPQ
SPQ
Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm
0.022
0.027
0.033
0.039
0.047
0.0ꢀ6
0.068
0.082
0.1
0.12
0.1ꢀ
0.18
0.22
0.27
0.33
0.39
0.47
8ꢀ223
8ꢀ273
8ꢀ333
8ꢀ393
8ꢀ473
8ꢀꢀ63
8ꢀ683
8ꢀ823
8ꢀ104
8ꢀ124
8ꢀ1ꢀ4
8ꢀ184
8ꢀ224
8ꢀ274
8ꢀ334
8ꢀ394
8ꢀ474
86223
86273
86333
86393
86473
86ꢀ63
86683
86823
86104
86124
861ꢀ4
86184
86224
86274
86334
86394
86474
2.ꢀ 6.ꢀ 7.2
0.2ꢀ
2000
2000
2000
1000
3.ꢀ 8.0 7.2
4.ꢀ 9.0 7.2
6.0 11.0 7.2
0.3ꢀ
0.4ꢀ
0.6ꢀ
1ꢀ00
1000
7ꢀ0
1ꢀ00
1000
1000
2000
2000
2000
1000
1000
1000
Notes
(1) Net weight for short lead product only
(2) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to Packaging Information
SPQ = Standard packing quantity
•
Document Number: 28112
Revision: 26-Apr-11
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
3
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
URdc = 250 V; URac = 160 V
CATALOG NUMBER 2222 470 ... AND PACKAGING
AMMOPACK (2)
REEL (2)
LOOSE IN BOX
DIMENSIONS
W x H x L
(mm)
C
(µF)
MASS (1)
(g)
H = 18.5 mm
short leads long leads
C-tol. = 10 %
last 5 digits of
C-tol. = 5 %
last 5 digits of
catalog number catalog number
SPQ
SPQ
SPQ
SPQ
Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm
0.01
0.012
3ꢀ103
3ꢀ123
3ꢀ1ꢀ3
3ꢀ183
3ꢀ223
3ꢀ273
3ꢀ333
3ꢀ393
3ꢀ473
3ꢀꢀ63
3ꢀ683
3ꢀ823
3ꢀ104
3ꢀ124
36103
36123
361ꢀ3
36183
36223
36273
36333
36393
36473
36ꢀ63
36683
36823
36104
36124
2.ꢀ x 6.ꢀ x 7.2
3.ꢀ x 8.0 x 7.2
0.2ꢀ
0.3ꢀ
2000
1ꢀ00
2000
1ꢀ00
2000
2000
1000
1000
0.01ꢀ
0.018
0.022
0.027
0.033
0.039
0.047
0.0ꢀ6
0.068
0.082
0.1
4.ꢀ x 9.0 x 7.2
6.0 x 11.0 x 7.2
0.4ꢀ
0.60
1000
7ꢀ0
1000
1000
2000
2000
1000
1000
0.12
Notes
(1) Net weight for short lead product only
(2) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to Packaging Information
SPQ = Standard packing quantity
•
URdc 400 V; URac 200 V
CATALOG NUMBER 2222 470 ... AND PACKAGING
AMMOPACK (2)
H = 18.5 mm
REEL (2)
LOOSE IN BOX
short leads long leads
DIMENSIONS
W x H x L
(mm)
C
(µF)
MASS (1)
(g)
C-tol. = 10 %
last 5 digits of
C-tol. = 5 %
last 5 digits of
catalog number catalog number
SPQ
SPQ
SPQ
SPQ
Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm
0.001
6ꢀ102
6ꢀ122
6ꢀ1ꢀ2
6ꢀ182
6ꢀ222
6ꢀ272
6ꢀ332
6ꢀ392
6ꢀ472
6ꢀꢀ62
6ꢀ682
6ꢀ822
6ꢀ103
6ꢀ123
6ꢀ1ꢀ3
6ꢀ183
6ꢀ223
6ꢀ273
6ꢀ333
6ꢀ393
6ꢀ473
66102
66122
661ꢀ2
66182
66222
66272
66332
66392
66472
66ꢀ62
66682
66822
66103
66123
661ꢀ3
66183
66223
66273
66333
66393
66473
0.0012
0.001ꢀ
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.00ꢀ6
0.0068
0.0082
0.01
0.012
0.01ꢀ
0.018
0.022
0.027
0.033
0.039
0.047
2.ꢀ x 6.ꢀ x 7.2
0.2ꢀ
2000
2000
2000
1000
3.ꢀ x 8.0 x 7.2
4.ꢀ x 9.0 x 7.2
6.0 x 11.0 x 7.2
0.3ꢀ
0.4ꢀ
0.60
1ꢀ00
1000
7ꢀ0
1ꢀ00
1000
1000
2000
2000
2000
1000
1000
1000
Notes
(1) Net weight for short lead product only
(2) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to Packaging Information
SPQ = Standard packing quantity
•
www.vishay.com
4
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28112
Revision: 26-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to: “Packaging Information”: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches 1ꢀ mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
For products with pitch 1ꢀ mm, w = l = 0.3 mm and h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
CBA116
Imax. = I + Δ
hmax. = h + Δ
Seating plane
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Storage temperature: Tstg = - 2ꢀ °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of ꢀ0 % 2 %.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28112
Revision: 26-Apr-11
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
ꢀ
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
CHARACTERISTICS
Capacitance as a function of frequency (typical curve)
Capacitance as a function of ambient temperature (typical curve)
10
2
1
1 kHz
ꢀ
0
0
-1
-2
-3
max.
typical
min.
-20
-ꢀ
-60
2
3
4
ꢀ
20
60
100 Tamb (°C)
f (Hz)
10
10
10
10
Impedance as a function of frequency (typical curve)
Maximum DC and AC voltage as a function of temperature
2
10
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
-1
-2
10
10
10
-3
10
T
100
amb (°C)
- 20
20
60
- 60
4
ꢀ
6
7
8
f (Hz)
10
10
10
10
10
Maximum RMS voltage as a function of frequency
Maximum RMS current as a function of frequency
2
1
2
10
10
10
1
10
8ꢀ °C < Tamb ≤ 12ꢀ °C, 63 VDC
Tamb ≤ 8ꢀ °C, 63 VDC
0
0
10
10
2
3
4
ꢀ
6
2
3
4
ꢀ
6
f (Hz)
10
f (Hz)
10
10
10
10
10
10
10
10
10
www.vishay.com
6
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28112
Revision: 26-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
Maximum RMS voltage as a function of frequency
Maximum RMS current as a function of frequency
2
1
2
10
10
10
1
10
Tamb ≤ 8ꢀ °C, 100 VDC
8ꢀ °C < Tamb ≤ 12ꢀ °C, 100 VDC
0
0
10
10
2
2
2
3
4
ꢀ
6
6
6
2
3
4
ꢀ
6
f (Hz)
f (Hz)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Maximum RMS voltage as a function of frequency
Maximum RMS current as a function of frequency
3
2
3
2
10
10
10
10
1
1
10
10
10
10
Tamb ≤ 8ꢀ °C, 2ꢀ0 VDC
8ꢀ °C < Tamb ≤ 12ꢀ °C, 2ꢀ0 VDC
0
0
3
4
ꢀ
2
3
4
ꢀ
6
f (Hz)
f (Hz)
10
10
10
10
10
10
10
10
Maximum RMS voltage as a function of frequency
Maximum RMS current as a function of frequency
3
2
3
2
10
10
10
10
1
1
10
10
10
10
8ꢀ °C < Tamb ≤ 12ꢀ °C, 400 VDC
Tamb ≤ 8ꢀ °C, 400 VDC
0
0
3
4
ꢀ
2
3
4
ꢀ
6
f (Hz)
f (Hz)
10
10
10
10
10
10
10
10
Document Number: 28112
Revision: 26-Apr-11
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
7
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
MAXIMUM RMS CURRENT (SINEWAVE) AS A FUNCTION OF FREQUENCY
The maximum RMS current is defined by Iac = x C x Uac.
Uac is the maximum AC voltage depending on the ambient temperature in the curves “ Maximum RMS voltage and AC current
as a function of frequency”.
Tangent of loss angle as a function of frequency (typical curve)
Insulation resistance as a function of ambient temperature
(typical curve)
103
10ꢀ
ꢀ
4
3
2
1
104
103
102
Curve 1: C = 0.33 µF
Curve 2: 0.33 µF, C = 1.2 µF
Curve 3: 1.2 µF, C = 3.9 µF
Curve 4: 3.9 µF, C = 6.8 µF
Curve ꢀ: C = 6.8 µF
101
102
- 60
10ꢀ
- 20
20
60
102
103
104
Tamb (°C)
100
f (Hz)
Maximum allowed component temperature rise (T) as a
function of the ambient temperature (Tamb
Maximum DC and AC voltage as a function of temperature
)
16
12
8
4
0
- 60
Tamb (°C)
100
- 20
20
60
www.vishay.com
8
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28112
Revision: 26-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
HEAT CONDUCTIVITY (G) AS A FUNCTION OF PITCH AND CAPACITOR BODY THICKNESS IN mW/°C
HEAT CONDUCTIVITY (mW/°C)
Wmax.
(mm)
PITCH 5 mm
2.ꢀ
3.ꢀ
4.ꢀ
6.0
2.ꢀ
3.0
4.0
ꢀ.ꢀ
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of
the free ambient temperature.
The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film
Capacitors”.
The component temperature rise (T) can be measured (see section “Measuring the Component Temperature” for more details)
or calculated by T = P/G:
T = Component temperature rise (°C)
P = Power dissipation of the component (mW)
G = Heat conductivity of the component (mW/°C)
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
Thermocouple
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
The temperature rise is given by T = TC - Tamb
.
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
Document Number: 28112
Revision: 26-Apr-11
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
9
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described
hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference
suppression capacitors conforming the standards must be used.
For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information
depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC).
2. The peak-to-peak voltage (UP-P) shall not be greater than 22 x URAC to avoid the ionization inception level.
3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
2 dt URdc
dU
-------
dU
-------
2
dt
dt
rated
0
T is the pulse duration.
The rated voltage pulse slope is valid for ambient temperatures up to 8ꢀ °C. For higher temperatures a derating factor of 3 %
per K shall be applied.
4. The maximum component surface temperature rise must be lower than the limits (see graph “Max. allowed component
temperature rise”).
ꢀ. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values
mentioned in the table: “Heat Conductivity”
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with
an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and
surge voltages from the mains or line card supply included).
Voltage Conditions for 6 Above
Tamb 85 °C
URAC
85 °C < Tamb 100 °C
0.8 x URAC
100 °C < Tamb 125 °C
0.ꢀ x URAC
ALLOWED VOLTAGES
Maximum continuous RMS voltage
Maximum temperature RMS-overvoltage (< 24 h)
Maximum peak voltage (VO-P) (< 2 s)
URAC
0.62ꢀ x URAC
1.2ꢀ x URAC
1.6 x URDC
1.3 x URDC
0.8 x URDC
www.vishay.com
10
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28112
Revision: 26-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
INSPECTION REQUIREMENTS
General Notes:
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1
Dimensions (detail)
As specified in chapters “General Data” of this
specification
4.3.1
Initial measurements
Capacitance
Tangent of loss angle for:
C 10 nF at 1 MHz
10 nF < C 470 nF at 100 kHz
C > 470 nF at 10 kHz
No visible damage
4.3
4.4
Robustness of terminations
Resistance to soldering heat
Tensile: Load 10 N; 10 s
Bending: Load ꢀ N; 4 x 90°
Method: 1A
Solder bath: 280 °C ꢀ °C
Duration: 10 s
4.14
Component solvent resistance
Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: ꢀ min 0.ꢀ min
Recovery time: Min. 1 h, max. 2 h
4.4.2
Visual examination
No visible damage
Legible marking
Capacitance
C/C| 2 % of the value measured initially
Tangent of loss angle
Increase of tan
0.00ꢀ for: C 10 nF or
0.003 for: 10 nF < C 470 nF or
0.002 for: C > 470 nF
Compared to values measured in 4.3.1
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1
Initial measurements
Capacitance
Tangent of loss angle for:
C 10 nF at 1 MHz
10 nF < C 470 nF at 100 kHz
C > 470 nF at 10 kHz
4.6
4.7
Rapid change of temperature
Vibration
A = - ꢀꢀ °C
B = + 12ꢀ °C
ꢀ cycles
Duration t = 30 min
Visual examination
Mounting:
No visible damage
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to ꢀꢀ Hz
Amplitude: 0.7ꢀ mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
4.7.2
Final inspection
Visual examination
No visible damage
Document Number: 28112
Revision: 26-Apr-11
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.9
Shock
Mounting:
See section “Mounting” of this specification
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
4.9.3
Final measurements
Visual examination
Capacitance
No visible damage
C/C| ꢀ % for w = 2.ꢀ mm or
C/C| 3 % for w > 2.ꢀ mm of the value
measured in 4.6.1
Tangent of loss angle
Insulation resistance
Increase of tan :
0.00ꢀ for: C 10 nF or
0.003 for: 10 nF < C 470 nF or
0.002 for: C > 470 nF
Compared to values measured in 4.6.1
As specified in section “Insulation Resistance”
of this specification
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10
Climatic sequence
4.10.2 Dry heat
Temperature: + 12ꢀ °C
Duration: 16 h
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold
Temperature: - ꢀꢀ °C
Duration: 2 h
4.10.6 Damp heat cyclic
Test Db, remaining cycles
4.10.6.2 Final measurements
Voltage proof = URDC for 1 min within
1ꢀ min after removal from test chamber
No breakdown or flash-over
Visual examination
No visible damage
Legible marking
Capacitance
C/C| ꢀ % of the value measured in
4.4.2 or 4.9.3
Tangent of loss angle
Increase of tan :
0.008 for: C 10 nF or
0.00ꢀ for: 10 nF < C 470 nF or
0.003 for: C > 470 nF
Compared to values measured in
4.3.1 or 4.6.1
Insulation resistance
ꢀ0 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11
Damp heat steady state
ꢀ6 days, 40 °C, 90 % to 9ꢀ % RH
4.11.1 Initial measurements
Capacitance
Tangent of loss angle at 1 kHz
4.11.3 Final measurements
Voltage proof = URDC for 1 min within
1ꢀ min after removal from test chamber
No breakdown or flash-over
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| ꢀ % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan :
0.00ꢀ for: C 470 nF or
0.003 for: C > 470 nF
Compared to values measured in 4.11.1
Insulation resistance
ꢀ0 % of values specified in section
“Insulation Resistance” of this specification
www.vishay.com
12
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
Document Number: 28112
Revision: 26-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT470
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C3
CONDITIONS
PERFORMANCE REQUIREMENTS
4.12
Endurance
Duration: 2000 h
1.2ꢀ x URDC at 8ꢀ °C
0.62ꢀ x URDC at 12ꢀ °C
4.12.1 Initial measurements
4.12.ꢀ Final measurements
Capacitance
Tangent of loss angle for:
C 10 nF at 1 MHz
10 nF < C 470 nF at 100 kHz
C > 470 nF at 10 kHz
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| ꢀ % compared to values measured in
4.12.1
Tangent of loss angle
Increase of tan :
0.00ꢀ for: C 10 nF or
0.003 for: 10 nF < C 470 nF or
0.002 for: C > 470 nF
Compared to values measured in 4.12.1
Insulation resistance
ꢀ0 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.13
Charge and discharge
10 000 cycles
Charged to URDC
Discharge resistance:
UR
--------------------------------------------
R =
C ꢀ dU dtR
4.13.1 Initial measurements
4.13.3 Final measurements
Capacitance
Tangent of loss angle for:
C 10 nF at 1 MHz
10 nF < C 470 nF at 100 kHz
C > 470 nF at 10 kHz
Capacitance
|C/C| 3 % compared to values measured in
4.13.1
Tangent of loss angle
Increase of tan :
0.00ꢀ for: C 10 nF or
0.003 for: 10 nF < C 470 nF or
0.002 for: C > 470 nF
Compared to values measured in 4.13.1
Insulation resistance
ꢀ0 % of values specified in section
“Insulation Resistance” of this specification
Document Number: 28112
Revision: 26-Apr-11
For technical questions, contact: dc-film@vishay.com
This document is subject to change without notice.
www.vishay.com
13
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
222247036393
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.039 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
222247036683
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.068 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
222247041563
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.056 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247042823
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.082 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247045823
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.082 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247048473
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.047 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247049103
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.01 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247049153
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.015 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247049183
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.018 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247049273
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.027 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247049683
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.068 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
222247049823
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.082 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明