230618181601 [VISHAY]
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 160 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;型号: | 230618181601 |
厂家: | VISHAY |
描述: | RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 160 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT 电阻器 |
文件: | 总11页 (文件大小:123K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SFR16S/25/25H
Vishay BCcomponents
Standard Metal Film Leaded Resistors
FEATURES
• Low cost
• Low noise (max. 1.5 µV/V for R > 1 MΩ)
• Small size (SFR16S: 0204, SFR25/25H: 0207)
• Lead (Pb)-free solder contacts
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting leads of electrolytic
copper are welded to the end-caps.
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
The resistors are coated with a colored lacquer (light-blue for
type SFR16S; light-green for type SFR25 and red-brown for
type SFR25H) which provides electrical, mechanical and
climatic protection. The encapsulation is resistant to all
cleaning solvents in accordance with IEC 60068-2-45.
• Compliant to RoHS directive 2002/95/EC
APPLICATIONS
• General purpose resistors
TECHNICAL SPECIFICATIONS
VALUE
DESCRIPTION
SFR16S
SFR25
SFR25H
5 %; 0.22 Ω to 10 MΩ
1 %; 1 Ω to 10 MΩ
5 %; 1 Ω to 3 MΩ
1 %; 4.99 Ω to 3 MΩ
Jumper (0 Ω)
Resistance Range
Jumper (0 Ω)
Resistance Tolerance
Temperature Coefficient:
R < 4.7 Ω
1 %, E24/E96 series; 5 %, E24 series
≤
≤
≤
≤
250 ppm/K
100 ppm/K
250 ppm/K
250 ppm/K
0.5 W
≤
≤
≤
≤
100 ppm/K
100 ppm/K
100 ppm/K
250 ppm/K
0.4 W
≤
≤
≤
≤
100 ppm/K
100 ppm/K
100 ppm/K
250 ppm/K
0.5 W
4.7 Ω ≤ R ≤ 100 kΩ
100 kΩ < R ≤ 1 MΩ
R > 1 MΩ
Rated Dissipation, P70
Thermal Resistance, Rth
Maximum Permissible Voltage, (Umax. AC/DC)
Noise:
170 K/W
200 V
200 K/W
250 V
150 K/W
350 V
R < 68 kΩ
max. 0.1 µV/V
max. 0.5 µV/V
max. 1.5 µV/V
max. 1.5 µV/V
max. 0.1 µV/V
max. 0.1 µV/V
max. 0.1 µV/V
max. 1.5 µV/V
IEC 60115-1
55/155/56
max. 0.1 µV/V
max. 0.1 µV/V
max. 0.1 µV/V
max. 1.5 µV/V
68 kΩ ≤ R ≤ 100 kΩ
100 kΩ ≤ R ≤ 1 MΩ
R > 1 MΩ
Basic Specifications
Climatic Category (IEC 60068-1)
Stability, ΔR max., After:
Load (1000 h, P70):
R Range
(2 % R + 0.05 Ω)
(2 % R + 0.05 Ω)
(2 % R + 0.05 Ω)
Long Term Damp Heat Test (56 Days):
R ≤ 1 MΩ
(1 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
(2 % R + 0.1 Ω)
R > 1 MΩ
Soldering (10 s, 260 °C)
Short Time Overload
(0.25 % R + 0.05 Ω)
(0.25 % R + 0.05 Ω)
(0.25 % R + 0.05 Ω)
(0.25 % R + 0.05 Ω)
(0.25 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
Note
• R value is measured with probe distance of 24 mm 1 mm using 4-terminal method
www.vishay.com
34
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28722
Revision: 06-Aug-10
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: SFR2500001001FA500
S
F
R
2
5
0
0
0
0
1
0
0
1
F
A
5
0
0
MODEL/SIZE
VARIANT
TCR/MATERIAL
VALUE
TOLERANCE PACKAGING (1)
SPECIAL
SFR16S0
SFR2500
SFR25H0
0 = Neutral
0 = Standard
Z = Jumper
3 digit value
1 digit multiplier
MULTIPLIER
F = 1 %
J = 5 %
Z = Jumper
N4
A5
A1
R5
The 2 digits
are used for
all special
parts.
00 = Standard
Z = Value overflow
(special)
7 = *10-3
2 = *102
3 = *103
4 = *104
8 = *10-2
9 = *10-1
0 = *100
1 = *101
5 = *105
Z = 0000
PRODUCT DESCRIPTION: SFR25 1 % A5 1K0
SFR25
1 %
A5
1K0
MODEL/SIZE
TOLERANCE
PACKAGING (1)
RESISTANCE VALUE
SFR16S
SFR25
SFR25H
1 %
5 %
N4
A5
A1
R5
47K = 47 kΩ
51R1 = 51.1 Ω
Notes
(1) Please refer to table PACKAGING
• The jumper has a maximum resistance Rmax. = 30 mΩ at 3 A (SFR16S)
• The jumper has a maximum resistance Rmax. = 10 mΩ at 5 A (SFR25)
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products
PACKAGING
AMMO PACK
REEL
MODEL
TAPING
PIECES
5000
CODE
A5
PIECES
CODE
SFR16S, SFR25, SFR25H
SFR25, SFR25H
Axial, 52 mm
Radial
5000
-
R5
-
1000
A1
4000
N4
DIMENSIONS
L1
Ø d
Ø D
Outline
L2
DIMENSIONS - resistor types and relevant physical dimensions in millimeters
Ø Dmax.
L1 max.
L2 max.
TYPE
Ø d
SFR16S
SFR25
SFR25H
1.9
3.5
4.1
0.45 0.05
0.58 0.05
0.58 0.05
2.5
6.5
7.5
2.5
6.5
7.5
Document Number: 28722
Revision: 06-Aug-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
35
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
OUTLINES
MASS PER UNIT
The length of the body (L1) is measured by inserting the
MASS
(mg)
leads into holes of two identical gauge plates and moving
these plates parallel to each other until the resistor body is
clamped without deformation (IEC 60294).
TYPE
SFR16S
SFR25
102
205
205
MARKING
SFR25H
The nominal resistance and tolerance are marked on the
resistor using four or five colored bands in accordance with
IEC 60062, marking codes for resistors and capacitors.
PRODUCTS WITH RADIAL LEADS (SFR25, SFR25H)
P2
P
H1
H
H0
L1
W0
L
W
P0
P1
D0
F
DIMENSIONS - RADIAL TAPING
SYMBOL
PARAMETER
VALUE
12.7
12.7
3.85
6.35
4.8
TOLERANCE
UNIT
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
P
Pitch of components
Feed-hole pitch
1.0
P0
P1
P2
F
0.2
Feed-hole centre to lead at topside at the tape
Feed-hole center to body center
Lead-to-lead distance
0.5
1.0
+ 0.7/- 0
W
W0
H1
H0
H
Tape width
18.0
5.5
0.5
Minimum hold down tape width
Component height
-
Max.
0.5
1
29
Lead wire clinch height
16.5
19.5
4.0
Height of component from tape center
Feed-hole diameter
D0
L
0.2
-
Maximum length of snipped lead
Minimum lead wire (tape portion) shortest lead
11.0
2.5
L1
-
Note
• Please refer document number 28721 “Packaging” for more detail
www.vishay.com
36
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28722
Revision: 06-Aug-10
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
FUNCTIONAL PERFORMANCE
PRODUCT CHARACTERIZATION
Standard values of nominal resistance are taken from the E96/E24 series for resistors with a tolerance of 1 % or 5 %.
The values of the E96/E24 series are in accordance with IEC 60063.
The power that the resistor can dissipate depends on the operating temperature
100
Pmax.
(% Prated
)
50
Maximum dissipation (Pmax.) in percentage of
rated power as a function of the
0
- 55
0
50
70
100
155
ambient temperature (Tamb).
Tamb (°C)
Derating
103
Pmax.
(W)
102
10
1
tp
/
ti = 1000
500
200
100
50
20
10
5
2
10-1
10-6
10-5
10-4
10-3
10-2
10-1
1
t
(s)
i
SFR16S Pulse on a regular basis; maximum permissible peak pulse power (Pmax.) as a function of pulse duration (ti)
Document Number: 28722
Revision: 06-Aug-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
37
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
600
Umax.
(V)
500
400
300
200
100
0
10-6
10-5
10-4
10-3
10-2
10-1
1
ti (s)
SFR16S Pulse on a regular basis; maximum permissible peak pulse voltage (Umax.) as a function of pulse duration (ti)
103
Pmax.
(W)
102
tp
/
ti = 1000
500
200
100
50
20
10
1
10
5
2
10-1
10-6
10-5
10-3
10-2
10-1
1
10-4
t
i(s)
SFR25 Pulse on a regular basis; maximum permissible peak pulse power (Pmax.) as a function of pulse duration (ti)
Pulse Loading Capabilities
600
Umax.
(V)
500
400
300
200
100
0
10-6
10-5
10-4
10-3
10-2
10-1
1
ti (s)
SFR25 Pulse on a regular basis; maximum permissible peak pulse voltage (Umax.) as a function of pulse duration (ti)
www.vishay.com
38
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28722
Revision: 06-Aug-10
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
103
Pmax.
(W)
102
tp
/
ti = 1000
500
200
100
50
10
1
20
10
5
2
10-1
10-6
10-5
10-4
10-3
10-2
10-1
1
ti (s)
SFR25H Pulse on a regular basis; maximum permissible peak pulse power (Pmax.) as a function of pulse duration (ti)
1200
h
Umax.
(V)
800
400
0
10-6
10-5
10-4
10-3
10-2
10-1
) as a function of pulse duration (ti)
1
ti (s)
SFR25H Pulse on a regular basis; maximum permissible peak pulse voltage (
Umax.
Pulse Loading Capabilities
Document Number: 28722
Revision: 06-Aug-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
39
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
100
∆ T
(K)
50
0
0
0.2
0.4
0.6
0.8
(W )
P
SFR16S Hot-spot temperature rise (ΔT) as a function of dissipated power
100
∆
(K)
T
SFR25
80
60
40
SFR25H
20
0
0
0.1
0.2
0.3
0.4
0.5
(W)
P
SFR25/SFR25H Hot-spot temperature rise (ΔT) as a function of dissipated power
Note
• The maximum permissible hot-spot temperature is 155 °C.
Application Information
www.vishay.com
40
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28722
Revision: 06-Aug-10
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
TESTS AND REQUIREMENTS
In the Test Procedures and Requirements table, tests and
requirements are listed with reference to the relevant clauses
of IEC 60115-1 and IEC 60068-2-xx test methods. A short
description of the test procedure is also given. In some in-
stances deviations from the IEC recommendations were
necessary for our method of specifying. All soldering tests
are performed with mildly activated flux.
Essentially all tests are carried out in accordance with
IEC 60115-1 specification, category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category temperature; damp heat, steady state, test
duration: 56 days).
The tests are carried out in accordance with IEC 60068-2-xx
test method under standard atmospheric conditions
according to IEC 60068-1, 5.3.
TEST PROCEDURES AND REQUIREMENTS
IEC
REQUIREMENTS
IEC
60068-2-
RESISTANCE
RANGE
60115-1
TEST
PROCEDURE
TEST
METHOD
SFR16S
SFR25
SFR25H
CLAUSE
Robustness of
terminations:
4.16
Tensile all
samples
Ø 0.45 mm, load 5 N; 10 s
Ø 0.58 mm, load 10 N; 10 s
4.16.2
21 (Ua1)
21 (Ub)
21 (Uc)
Number of failures < 10 x 10-6
Number of failures < 10 x 10-6
Bending half
number of
samples
Ø 0.45 mm, load 2.5 N; 4 x 90°
Ø 0.58 mm, load 5 N; 4 x 90°
4.16.3
4.16.4
Torsion other half
of samples
3 x 360°
No damage
ΔR max.: (0.25 % R + 0.05 Ω)
in opposite directions
2 s; 235 °C:
Solder bath method; SnPb40
3 s; 245 °C:
Good tinning (≥ 95 % covered);
4.17
20 (Ta)
Solderability
no damage
Solder bath method;
SnAg3Cu0.5
8 h steam or 16 h 155 °C;
leads immersed 6 mm;
for 2 s at 235 °C: Solder bath
(SnPb40)
for 3 s at 245 °C: Solder bath
(SnAgCu0.5) method
Solderability
(after aging)
Good tinning (≥ 95 % covered);
no damage
Resistance to
soldering heat
Thermal shock:
4.18
4.19
4.20
20 (Tb)
14 (Na)
29 (Eb)
ΔR max.: (0.25 % R + 0.05 Ω)
ΔR max.: (0.25 % R + 0.05 Ω)
10 s; 260 °C; 3 mm from body
Rapid change of
temperature
30 min at - 55 °C and
30 min at + 155 °C; 5 cycles
3 x 1500 bumps in 3 directions;
40 g
No damage
ΔR max.: (0.25 % R + 0.05 Ω)
Bump
Frequency 10 Hz to 500 Hz;
displacement 1.5 mm or
acceleration 10 g; 3 directions;
total 6 h (3 x 2 h)
No damage
ΔR max.: (0.25 % R + 0.05 Ω)
4.22
6 (Fc)
Vibration
4.23
Climatic sequence
:
Rins min.: 1000 MΩ
4.23.2
2 (Ba)
Dry heat
16 h; 155 °C
Damp heat
(accelerated)
1st cycle
24 h; 55 °C;
4.23.3
30 (Db)
90 % to 100 % RH
4.23.4
4.23.5
1 (Aa)
13 (M)
Cold
2 h; - 55 °C
Low air pressure
2 h; 8.5 kPa; 15 °C to 35 °C
R ≤ 1 MΩ
R > 1 MΩ
ΔR max.: (1 % R + 0.05 Ω)
Damp heat
(accelerated)
5 days; 55 °C;
ΔR max.
4.23.6
4.24
30 (Db)
95 % to 100 % RH
ΔR max.: (1 % R + 0.05 Ω)
(2 % R
remaining cycles
+ 0.1 Ω)
56 days; 40 °C;
90 % to 95 % RH;
loaded with 0.01 P70
(Steps: 0 V to 100 V)
Damp heat
(steady state)
Rins min.: 1000 MΩ
78 (Cab)
ΔR max.: (2 % R + 0.05 Ω)
Document Number: 28722
Revision: 06-Aug-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
41
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
IEC
REQUIREMENTS
SFR25
IEC
60068-2-
RESISTANCE
RANGE
60115-1
TEST
PROCEDURE
TEST
METHOD
SFR16S
SFR25H
CLAUSE
1000 h;
Endurance
(at 70 °C)
4.25.1
4.8
loaded with P70 or Umax.
;
ΔR max.: (2 % R + 0.05 Ω)
1.5 h ON and 0.5 h OFF
R < 4.7 Ω
R ≤ 100 kΩ
R ≤ 1 MΩ
R > 1 MΩ
≤
≤
≤
≤
250 ppm/K
100 ppm/K
250 ppm/K
250 ppm/K
≤
≤
≤
≤
100 ppm/K
100 ppm/K
100 ppm/K
250 ppm/K
≤
≤
≤
≤
100 ppm/K
100 ppm/K
100 ppm/K
250 ppm/K
Temperature
coefficient
Between
- 55 °C and + 155 °C
URMS = 400 V (SFR16S) or
URMS = 600 V (SFR25 and
SFR25H); during 1 min;
V-block method
Voltage proof on
insulation
4.7
No breakdown
R < 68 kΩ
max. 0.1 µV/V max. 0.1 µV/V max. 0.1 µV/V
R ≤ 100 kΩ max. 0.5 µV/V max. 0.1 µV/V max. 0.1 µV/V
4.12
Noise
IEC 60195
R ≤ 1 MΩ
R > 1 MΩ
max. 1.5 µV/V max. 0.1 µV/V max. 0.1 µV/V
max. 1.5 µV/V max. 1.5 µV/V max. 1.5 µV/V
Umax. DC = 500 V
during 1 min;
V-block method
Insulation
resistance
4.6.1.1
Rins min.: 1000 MΩ
Room temperature;
P = 6.25 x Pn
(SFR25, SFR25H) or
6.25 x 0.25 W (SFR16S);
(voltage not more than
2 x limiting voltage); 10 cycles;
5 s ON and 45 s OFF
ΔR max.:
Short time
overload
ΔR max.:
(1 % R
4.13
(0.25 % R + 0.05 Ω)
+ 0.05 Ω)
HISTORICAL 12NC INFORMATION
• The resistors had a 12-digit numeric code starting with 23.
Resistance Decade for 1 % Tolerance
• The subsequent 6 digits for 1 % or 7 digits for 5 % indicated
RESISTANCE DECADE
1 Ω to 9.76 Ω
LAST DIGIT
the resistor type and packaging.
8
9
1
2
3
4
5
6
• The remaining digits indicated the resistance value:
10 Ω to 97.6 Ω
100 Ω to 976 Ω
1 kΩ to 9.76 kΩ
10 kΩ to 97.6 kΩ
100 kΩ to 976 kΩ
1 MΩ to 9.76 MΩ
= 10 MΩ
- The first 3 digits for 1 % or 2 digits for 5 % indicated the
resistance value.
- The last digit indicated the resistance decade.
Resistance Decade for 5 % Tolerance
RESISTANCE DECADE
0.10 Ω to 0.91 Ω
1 Ω to 9.1 Ω
LAST DIGIT
7
8
9
1
2
3
4
5
6
10 Ω o 91 Ω
12NC Example
The 12NC of a SFR25 resistor, value 5600 Ω 5 %, taped on
a bandolier of 5000 units in ammopack was:
2322 181 43562.
100 Ω to 910 Ω
1 kΩ to 9.1 kΩ
10 kΩ to 91 kΩ
100 kΩ to 910 kΩ
1 MΩ to 9.1 MΩ
= 10 MΩ
www.vishay.com
42
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28722
Revision: 06-Aug-10
SFR16S/25/25H
Standard Metal Film Leaded Resistors
Vishay BCcomponents
HISTORICAL 12NC - Resistor type and packaging
23.. ... .....
BANDOLIER
IN AMMOPACK
BANDOLIER
ON REEL
TYPE
TOL.
RADIAL TAPED
STRAIGHT LEADS
1000 units 5000 units
STRAIGHT LEADS
4000 units
5000 units
..06 187 23...
..06 187 1....
..22 187 90346
..22 181 63...
..06 181 8....
..06 181 90011
..06 186 63...
..06 186 8....
5 %
1 %
-
..22 187 73...
..22 187 53...
..06 187 3...
SFR16S
-
-
Jumper
5 %
-
-
..06 187 90013
..22 181 43...
..22 188 2...
..06 184 03...
..22 181 53...
SFR25
1 %
-
-
Jumper
5 %
-
..22 181 90018
..22 186 16...
-
..22 181 90019
..22 186 76...
..22 186 3....
..06 186 03...
-
SFR25H
1 %
Document Number: 28722
Revision: 06-Aug-10
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
43
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
230618181603
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 16000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618181609
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 16 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618181693
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 16900 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618181694
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 169000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618181695
RESISTOR, METAL FILM, 0.4 W, 1 %, 250 ppm, 1690000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618181698
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 1.69 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618181699
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 16.9 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618181745
RESISTOR, METAL FILM, 0.4 W, 1 %, 250 ppm, 1740000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618182004
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 200000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618182101
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 210 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618182105
RESISTOR, METAL FILM, 0.4 W, 1 %, 250 ppm, 2100000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
230618182109
RESISTOR, METAL FILM, 0.4 W, 1 %, 100 ppm, 21 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明