231224272552 [VISHAY]
Fixed Resistor, Thin Film, 0.125W, 2550ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN;型号: | 231224272552 |
厂家: | VISHAY |
描述: | Fixed Resistor, Thin Film, 0.125W, 2550ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN |
文件: | 总8页 (文件大小:107K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCT 0603, MCU 0805, MCA 1206 - Precision
Vishay Beyschlag
Precision Flat Chip Resistors
FEATURES
• Approved according to EN 140401-801
• Thin-film technology
• Low TC: ± 10 to ± 25 ppm/K
• Precision tolerance of value: ± 0.1 and ± 0.25 %
• Superior overall stability: class 0.1 and 0.25
• Green product, supports lead-free soldering
APPLICATIONS
• Test and measuring equipment
• Medical equipment
• Industrial equipment.
MCT 0603, MCU 0805 and MCA 1206 Precision Thin Film
Flat Chip Resistors combine the proven reliability of the
professional products with an advanced level of precision
and stability. Therefore they are perfectly suited for
applications in the fields of test and measuring equipment
together with industrial and medical electronics.
METRIC SIZE
INCH:
0603
0805
1206
METRIC:
RR 1608M
RR 2012M
RR 3216M
TECHNICAL SPECIFICATIONS
DESCRIPTION
MCT 0603
RR 1608M
MCU 0805
MCA 1206
Metric size
RR 2012M
RR 3216M
47 Ω to 332 kΩ
± 0.1 %
Resistance range
47 Ω to 150 kΩ
47 Ω to 332 kΩ
Resistance tolerance
Temperature coefficient
Operation mode
± 0.25 %; ± 0.1 %
± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
± 25 ppm/K
precision
10/85/56
0.032 W
25 V
standard
55/125/56
0.1 W
precision
10/85/56
0.050 W
35 V
standard
55/125/56
0.125 W
150 V
precision
standard
55/125/56
0.25 W
Climatic category (LCT/UCT/days)
10/85/56
0.1 W
50 V
(1)
Rated dissipation, P70
Operating voltage, Umax AC/DC
Film temperature
Max. resistance change at P70
1 000 h
75 V
200 V
85 °C
125 °C
85 °C
125 °C
85 °C
125 °C
47 Ω to 150 kΩ
47 Ω to 332 kΩ
47 Ω to 332 kΩ
≤ 0.1 %
≤ 0.2 %
≤ 0.5 %
≤ 0.2 %
≤ 0.4 %
≤ 1.0 %
≤ 0.1 %
≤ 0.2 %
≤ 0.5 %
≤ 0.2 %
≤ 0.4 %
≤ 1.0 %
≤ 0.05 %
≤ 0.1 %
≤ 0.1 %
≤ 0.25 %
≤ 0.5 %
8 000 h
225 000 h
≤ 0.25 %
Specified lifetime
Insulation voltage :
1 minute; Uins
225 000 h
225 000 h
225 000 h
100 V
75 V
200 V
75 V
300 V
75 V
continuous
Failure rate
≤ 2 x 10−9/h
≤ 2 x 10−9/h
≤ 2 x 10−9/h
Note
1. The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded.
Document Number: 28700
Revision: 13-May-04
For technical questions contact: ff3aresistors@vishay.com
www.vishay.com
1
MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors
Vishay Beyschlag
ORDERING INFORMATION - type description and ordering code
M
C
T
0603
-25
0.1 %
P5
47 K
FILM TYPE PRODUCT CODE SIZE CODE IMPERIAL SIZE TEMPERATURE TOLERANCE PACKAGING
COEFFICIENT
RESISTANCE VALUE
M = Metal film
or cermet
C = Flat chip
T = 0603
U = 0805
A = 1206
0603
0805
1206
10 ppm/K
15 ppm/K
25 ppm/K
0.1 %
0.25 %
P1 = 1000 units
P5 = 5000 units
PW = 20000
units
See Temperature
coefficient and
resistance range table
Note: We recommend that the clear text ordering code is used to minimize the possibility of errors in order handling.
DIMENSIONS
T
1
W
W
T
H
T
2
L
DIMENSIONS - CHIP resistor types, mass and relevant physical dimensions
H
(mm)
L
W
(mm)
WT
(mm)
T1
(mm)
T2
(mm)
MASS
(mg)
TYPE
(mm)
MCT 0603
MCU 0805
MCA 1206
0.45 + 0.1/− 0.05
0.45 + 0.1/− 0.05
0.55 0.1
1.55 0.05
2.0 0.1
0.85 0.1
1.25 0.15
1.6 0.15
> 75 % of W
> 75 % of W
> 75 % of W
0.3 + 0.15/− 0.2 0.3 + 0.15/− 0.2
1.9
4.6
9.2
0.4 + 0.1/− 0.2
0.4 + 0.1/− 0.2
3.2 + 0.1/− 0.2
0.5 0.25
0.5 0.25
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
RESISTANCE VALUE (1)
T.C.
TOLERANCE
MCT 0603
MCU 0805
MCA 1206
Ω
Ω
Ω
± 25 ppm/K
0.25 %
47 to 150 k
47 to 332 kΩ
−
Ω
Ω
Ω
Ω
Ω
Ω
0.1 %
0.25 %
0.1 %
100 to 150 k
47 to 332 k
47 to 332 k
± 15 ppm/K
47 Ω to 150 kΩ
47 Ω to 100 kΩ
−
−
−
−
Ω
Ω
Ω
Ω
100 to 100 k
100 to 100 k
± 10 ppm/K(2)
0.25 %
0.1 %
47 Ω to 20 kΩ
47 Ω to 36 kΩ
Ω
Ω
Ω
100 to 36 kΩ
100 to 20 k
Note
1. Resistance values to be selected from E96 and E192 series, other values are available on request.
2. TC 10 is specified over the temperature range from - 10 °C to 85 °C.
Resistance ranges printed in bold are preferred T.C./tolerance combinations with optimized availability.
www.vishay.com
2
For technical questions contact: ff3aresistors@vishay.com
Document Number: 28700
Revision: 13-May-04
MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors
Vishay Beyschlag
DESCRIPTION
Production is strictly controlled and follows an extensive set
This includes full compatibility with the following directives:
of instructions established for reproducibility.
A
• 2000/53/EC End of Vehicle life Directive (ELV)
homogeneous film of metal alloy is deposited on a super high
grade (96 % Al203) ceramic substrate and conditioned to
achieve the desired temperature coefficient. Specially
designed inner contacts are deposited on both sides. A
special laser is used to achieve the target value by smoothly
fine trimming the resistive layer without damaging the
ceramics. A further conditioning is applied in order to
stabilize the trimming result. The resistor elements are
covered by a blue protective coating designed for electrical,
mechanical and climatic protection. The terminations receive
a final pure tin on nickel plating.
•
2000/53/EC Annex II to End of Vehicle Life Directive (ELV II)
• 2002/95/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
Solderability is specified for 2 years after production or
re-qualification. The permitted storage time is 20 years.
APPROVALS
The resistors are tested in accordance with EN 140401-801
(superseding CECC 40401-801) which refers to EN 60115-1
and EN 140400. Approval of conformity is indicated by the
CECC logo on the package label.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with EN 60286-3.
Vishay BEYSCHLAG has achieved "Approval of
Manufacturer" in accordance with EN 100114-1. The
release certificate for "Technology Approval Schedule" in
accordance with CECC 240001 based on EN 100114-6 is
granted for the Vishay BEYSCHLAG manufacturing process.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems and for automatic soldering using wave,
reflow or vapour phase. The encapsulation is resistant to all
cleaning solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
resistors are lead (Pb)-free, the pure tin plating provides
compatibility with lead (Pb)-free and lead-containing
soldering processes. The immunity of the plating against tin
whisker growth has been proven under extensive testing. All
products comply with the CEFIC-EECA-EICTA list of legal
restrictions on hazardous substances.
SPECIALS
On request, resistors are available with established reliability
in accordance with EN 140 401-801 Version E. Please refer
to the special data sheet for information on failure rate level,
available resistance ranges and order codes.
Document Number: 28700
Revision: 13-May-04
For technical questions contact: ff3aresistors@vishay.com
www.vishay.com
3
MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors
Vishay Beyschlag
FUNCTIONAL PERFORMANCE
P
MCT 0603
MCU 0805
MCA 1206
0.2
W
0.1
0
C
50
100
150
-50
0
70
ϑamb
Ambient Temperature
Derating - Standard Operation
P
MCT 0603
MCU 0805
MCA 1206
0.2
W
0.1
0
C
50
100
150
ϑamb
-50
0
70
Ambient Temperature
Derating - Precision Operation
1
A
1
µV/V
0.1
MCT 0603
MCU 0805
MCA 1206
0.01
1 kΩ
10 kΩ
100 kΩ
In accordance with IEC 60195
1 MΩ
10 MΩ
Resistance Value
R
Current Noise A1
www.vishay.com
4
For technical questions contact: ff3aresistors@vishay.com
Document Number: 28700
Revision: 13-May-04
MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors
Vishay Beyschlag
TEST AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days) is
valid. Unless otherwise specified the following values apply:
EN 60115-1, Generic specification (includes tests)
EN 140 400, Sectional specification (includes schedule for
qualification approval)
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
EN 140 401-801, Detail specification (includes schedule for
conformance inspection)
Air pressure: 86 kPa to 106 kPa (860 mbar to 1 060 mbar).
The components are approved in accordance with the
European CECC-system, where applicable. The following
table contains only the most important tests. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
The components are mounted for testing on boards in
accordance with EN 60115-1, 4.31 unless otherwise
specified.
The parameters stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140 401-801. However, some
additional tests and a number of improvements against
those minimum requirements have been included.
The tests are carried out in accordance with IEC 60068 and
under standard atmospheric conditions in accordance with
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
METHOD
REQUIREMENTS
PERMISSIBLE CHANGE
EN
60115-1
CLAUSE
TEST
PROCEDURE
STABILITY CLASS 0.1
STABILITY CLASS 0.25
stability for product types:
MCT 0603
100 Ω to 10 kΩ
100 Ω to 47.5 kΩ
47 Ω to 332 kΩ
47 Ω to < 100 Ω;
> 10 kΩ to 150 kΩ
MCU 0805
MCA 1206
47 Ω to < 100 Ω;
> 47.5 kΩ to 332 kΩ
−
4.5
-
-
resistance
0.1 %; 0.25 %
4.8.4.2
temperature
coefficient
at 20 / -10 / 20 °C and
20 / 85 / 20 °C
25 ppm/K; 15 ppm/K; 10 ppm/K
4.25.1
−
endurance at
70 °C:
standard
operation
mode
U =
P70 × R or
U = Umax; whichever is the
less severe;
1.5 h on; 0,5 h off
70 °C; 1000 h
70 °C; 8000 h
± (0.1 %R + 0.02 Ω) (1)
± (0.2 %R + 0.02 Ω) (1)
−
endurance at
70 °C:
power
U =
P70 × R or
U = Umax; whichever is the
less severe;
operation
mode
1.5 h on; 0.5 h off
1.5 h on; 0.5 h off
70 °C; 1000 h
70 °C; 8000 h
± (0.2 %R + 0.02 Ω) (1)
± (0.4 %R + 0.05 Ω) (1)
Document Number: 28700
Revision: 13-May-04
For technical questions contact: ff3aresistors@vishay.com
www.vishay.com
5
MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS - continued
IEC
60068-2
TEST
METHOD
REQUIREMENTS
PERMISSIBLE CHANGE
EN
60115-1
CLAUSE
TEST
PROCEDURE
STABILITY CLASS 0.1
STABILITY CLASS 0.25
stability for product types:
MCT 0603
100 Ω to 10 kΩ
100 Ω to 47.5 kΩ
47 Ω to 332 kΩ
47 Ω to < 100 Ω;
> 10 kΩ to 150 kΩ
MCU 0805
MCA 1206
47 Ω to < 100 Ω;
> 47.5 kΩ to 332 kΩ
−
4.25.3
-
endurance at
upper
85 °C; 1000h
125 °C; 1000h
(0.1 %R + 0.02 Ω)
(0.2 %R + 0.02 Ω)
(0.2 %R + 0.02 Ω)
(0.25 %R + 0.05 Ω)
category
temperature
4.24
4.23
78 (Cab)
damp heat,
steady state
(40 2) °C; 56 days;
(93 3) % RH
(0.1 %R + 0.02 Ω)
(0.25 %R + 0.05 Ω)
climatic
sequence:
4.23.2
4.23.3
4.23.4
2 (Ba)
30 (Db)
1 (Aa)
dry heat
damp heat, cyclic
cold
UCT; 16 h
55 °C; 24 h; > 90 % RH;1 cycle
LCT; 2 h
4.23.5
4.23.6
13 (M)
low air pressure 8.5 kPa; 2 h; 25 10 °C
30 (Db)
damp heat,
cyclic
55 °C; 5 days;
> 95 to 100 % RH; 5 cycles
LCT = - 55 °C; UCT = 125 °C
- 55 °C; 2h
± (0.1 %R + 0.02 Ω)
± (0.25 %R + 0.05 Ω)
-
1 (Aa)
cold
± (0.05 %R + 0.01 Ω)
4.19
14 (Na)
rapid change
of
temperature
30 minutes at LCT and
30 minutes at UCT; LCT = - 10 °C
UCT = 85 °C; 5 cycles
LCT = -10°C; UCT = 85°C;
5 cycle
(0.05 %R + 0.01 Ω)
no visible damage
LCT = - 55 °C; UCT = 125 °C
;
(0.25 %R + 0.05 Ω)
1000 cycles
no visible damage
4.13
-
short time
overload;
(0.05 %R + 0.01 Ω)
precision
operation mode
U = 2.5 x
P70 × R or
U = 2 x Umax; whichever is
short time
overload;
(0.05 %R + 0.01 Ω)
the less severe; 5s
standard
operation mode
4.27
4.37
-
-
single pulse
high voltage
overload;
standard
operation mode
severity no. 4:
(0.5 %R + 0.05 Ω) (2)
U = 10 x
P70 × R or
no visible damage
U = 2 x Umax; whichever is
the less severe;
10 pulses 10µs/700µs
periodic
electric
overload;
standard
operation mode
U = 15 × P70 × R or
U = 2 x Umax; whichever is
the less severe;
± (0.5 %R + 0.05 Ω) (2)
no visible damage
0.1 s on; 2.5 s off;
1000 cycles
www.vishay.com
6
For technical questions contact: ff3aresistors@vishay.com
Document Number: 28700
Revision: 13-May-04
MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS - continued
IEC
60068-2
TEST
REQUIREMENTS
PERMISSIBLE CHANGE
EN
60115-1
CLAUSE
TEST
PROCEDURE
STABILITY CLASS 0.1
STABILITY CLASS 0.25
METHOD
stability for product types:
MCT 0603
100 Ω to 10 kΩ
100 Ω to 47.5 kΩ
47 Ω to 332 kΩ
47 Ω to < 100 Ω;
> 10 kΩ to 150 kΩ
MCU 0805
47 Ω to < 100 Ω;
> 47.5 kΩ to 332 kΩ
MCA 1206
−
4.22
6 (Fc)
vibration
endurance by sweeping;
10 to 2000 Hz;
(0.05 %R + 0.01 Ω)
no visible damage
no resonance;
amplitude ≤ 1.5 mm or ≤ 200
m/s2; 6 h
4.17.2
58 (Td)
solderability
solder bath method;
SnPb40; non-activated flux
(215 3) °C; (3 0.3) s
good tinning (≥ 95 % covered);
solder bath method;
SnAg3Cu0,5 or SnAg3,5;
non-activated flux
no visible damage
(235 3) °C; (2 0.2) s
4.18.2
4.29
58 (Td)
45 (XA)
resistance to
soldering heat (260 5) °C; (10 1) s
solder bath method;
± (0.05 %R + 0.01 Ω)
component
solvent
isopropyl alcohol + 50 °C;
method 2
no visible damage
resistance
4.32
4.33
21 (Ue3)
21 (Ue1)
shear
RR 1608M; 9 N
RR 2012M and
RR 3216; 45 N
no visible damage
substrate
bending
depth 2 mm, 3 times
± (0.05 %R + 0.01 Ω)
no visible damage, no open circuit in bent position
no flashover or breakdown
4.7
-
-
voltage proof
flammability
Urms = Uins; 60 5 s
IEC 60695-2-2,
4.35
no burning after 30 s
needle flame test; 10 s
Special requirements for type MCA 1206
4.25.1
-
endurance at
70 °C:
U =
P70 × R or
U = Umax; whichever is the
precision
operation
mode
less severe
70 °C; 1000 h
70 °C; 8000 h
± (0.05 %R + 0.02 Ω)
± (0.1 %R + 0.02 Ω)
-
endurance at
70 °C:
U =
P70 × R or
U = Umax; whichever is the
standard
operation
mode
less severe
70 °C; 1000 h
70 °C; 8000 h
± (0.1 %R + 0.02 Ω)
(0.25 %R + 0.05 Ω)
Notes
1. See 4.25.1 (above): special requirements for type MCA 1206.
2. The pulse load stability of professional MFC resistors applies for precision resistors also. However, severe pulse loads are likely to jeopardise
precision stability requirements.
Document Number: 28700
Revision: 13-May-04
For technical questions contact: ff3aresistors@vishay.com
www.vishay.com
7
MCT 0603, MCU 0805, MCA 1206 - Precision
Precision Flat Chip Resistors
Vishay Beyschlag
ORDERING INFORMATION
Components may be ordered by using either a simple clear
text ordering code, see “Type description and ordering code”
or Vishay BCcomponents’ unique 12NC.
Last Digit of 12NC Indicating Resistance Decade
RESISTANCE DECADE
10 Ω to 99.9 Ω
LAST DIGIT
9
1
2
3
4
Numeric Ordering Code (12NC)
100 Ω to 999 Ω
• The resistors have a 12-digit ordering code starting with
2312.
1 kΩ to 9.99 kΩ
10 kΩ to 99.9 kΩ
100 kΩ to 999 kΩ
• The subsequent 4 digits indicate the resistor type,
specification and packaging; see the 12NC Ordering Code
table.
• The remaining 4 digits indicate the resistance value:
- The first 3 digits indicate the resistance value.
Ordering Example
The ordering code of a MCT 0603 resistor, value 47 kΩ and
TC 25 with 0.1 % tolerance, supplied in cardboard tape of
5000 units per reel is: 2312 216 74703.
- The last digit indicates the resistance decade in
accordance with the 12NC Indicating Resistance Decade
table.
12NC ORDERING CODE - resistors type and packaging
ORDERING CODE 2312... .....
CARDBOARD TAPE ON REEL
DESCRIPTION
P1
P5
PW
20 000 UNITS
TYPE
T.C.
TOL.
1 000 UNITS
5 000 UNITS
0.25 %
0.1 %
201 6....
201 7....
202 6....
202 7....
203 6....
203 7....
241 6....
241 7....
242 6....
242 7....
243 6....
243 7....
381 7....
216 6....
216 7....
217 6....
217 7....
218 6....
218 7....
256 6....
256 7....
257 6....
257 7....
258 6....
258 7....
396 7....
206 6....
206 7....
207 6....
207 7....
208 6....
208 7....
246 6....
246 7....
247 6....
247 7....
248 6....
248 7....
386 7....
25 ppm/K
0.25 %
0.1 %
MCT 0603
15 ppm/K
10 ppm/K
25 ppm/K
15 ppm/K
0.25 %
0.1 %
0.25 %
0.1 %
0.25 %
0.1 %
MCU 0805
MCA 1206
0.25 %
0.1 %
10 ppm/K
25 ppm/K
0.1 %
Resistance ranges printed in bold are preferred T.C./tolerance combinations with optimized availability.
www.vishay.com
8
For technical questions contact: ff3aresistors@vishay.com
Document Number: 28700
Revision: 13-May-04
相关型号:
231224272582
Fixed Resistor, Thin Film, 0.125W, 2580ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272641
Fixed Resistor, Thin Film, 0.125W, 264ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272642
Fixed Resistor, Thin Film, 0.125W, 2640ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272671
Fixed Resistor, Thin Film, 0.125W, 267ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272711
Fixed Resistor, Thin Film, 0.125W, 271ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272712
Fixed Resistor, Thin Film, 0.125W, 2710ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272713
Fixed Resistor, Thin Film, 0.125W, 27100ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272741
Fixed Resistor, Thin Film, 0.125W, 274ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272743
Fixed Resistor, Thin Film, 0.125W, 27400ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272771
Fixed Resistor, Thin Film, 0.125W, 277ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272773
Fixed Resistor, Thin Film, 0.125W, 27700ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
231224272801
Fixed Resistor, Thin Film, 0.125W, 280ohm, 150V, 0.1% +/-Tol, 15ppm/Cel, Surface Mount, 0805, CHIP, GREEN
VISHAY
©2020 ICPDF网 联系我们和版权申明