232224185763 [VISHAY]
RESISTOR, METAL GLAZE/THICK FILM, 0.25 W, 1 %, 200 ppm, 576000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;型号: | 232224185763 |
厂家: | VISHAY |
描述: | RESISTOR, METAL GLAZE/THICK FILM, 0.25 W, 1 %, 200 ppm, 576000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT 电阻器 |
文件: | 总7页 (文件大小:122K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VR25
Vishay BCcomponents
High Ohmic/High Voltage
Metal Glaze Leaded Resistors
FEATURES
• Rmax. = 22 MΩ; Umax. = 1600 VDC
• High pulse loading capability (up to 7 kV)
• Small size (0207)
• Lead (Pb)-free solder contacts
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compliant to RoHS directive 2002/95/EC
• AEC-Q200 qualified
A metal glazed film is deposited on a high grade ceramic body.
After a helical groove has been cut in the resistive layer, tinned
electrolytic copper wires are welded to the end-caps. The
resistors are coated with a light blue lacquer which provides
electrical, mechanical, and climatic protection.
APPLICATIONS
• Where high resistance, high stability and high reliability at
high voltage are required
The encapsulation is resistant to all cleaning solvents in
accordance with IEC 60068-2-45.
• High humidity environment
• White goods
• Power supplies
TECHNICAL SPECIFICATIONS
DESCRIPTION
VALUE
Resistance Range (1)
Resistance Tolerance and Series:
100 kΩ to 15 MΩ
100 kΩ to 22 MΩ
1 ꢀ: E24/E96 series; 5 ꢀ: E24 series
15 MΩ to 22 MΩ
5 ꢀ: E24 series; 10 ꢀ: E12 series
Rated Dissipation, P70
Thermal Resistance, Rth
Temperature Coefficient
0.25 W
140 K/W
≤
200 ppm/K
Maximum Permissible Voltage Umax.
:
DC
1600 V
1150 V
700 V
RMS
Dielectric Withstanding Voltage of the Insulation for 1 Min
Basic Specifications
IEC 60115-1
55/155/56
Climatic Category (IEC 60068-1)
Stability After:
Load (1000 h, P70
)
ΔR max.: (1.5 ꢀ R + 0.1 Ω)
ΔR max.: (1.5 ꢀ R + 0.1 Ω)
ΔR max.: (1.5 ꢀ R + 0.1 Ω)
max. 5 µV/V
Long Term Damp Heat Test (56 Days)
Soldering (10 s, 260 °C)
Noise
Note
(1) Ohmic values (other than resistance range) are available on request.
www.vishay.com
196
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28732
Revision: 14-Oct-09
VR25
High Ohmic/High Voltage
Metal Glaze Leaded Resistors
Vishay BCcomponents
PART NUMBER
PART NUMBER: VR25000001503JA100
V
R
2
5
0
0
0
0
0
1
5
0
3
J
A
1
0
0
PACKAGING (1)
MODEL/SIZE
VARIANT
TCR/MATERIAL
VALUE
TOLERANCE
SPECIAL
VR25000
0 = Neutral
0 = Standard
3 digit value
1 digit multiplier
MULTIPLIER
3 = *103
F = 1 ꢀ
J = 5 ꢀ
K = 10 ꢀ
A5
A2
A1
R5
N4
The 2 digits
are used for all
special parts.
00 = Standard
Z = Value overflow
(Special)
4 = *104
5 = *105
PRODUCT DESCRIPTION: VR25 5 % A1 150K
VR25
5 %
A1
150K
MODEL/SIZE
TOLERANCE
PACKAGING (1)
RESISTANCE VALUE
VR25
1 ꢀ
5 ꢀ
10 ꢀ
A5
A2
A1
R5
N4
150K = 150 kΩ
8M2 = 8.2 MΩ
Notes
(1) Please refer to table PACKAGING
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products
PACKAGING
AMMO PACK
REEL
MODEL
TAPING
PIECES
2000
CODE
A2
PIECES
CODE
-
-
R5
-
Axial, 26 mm
5000
A5
5000
VR25
Axial, 52 mm
Radial
1000
A1
-
-
4000
N4
-
DIMENSIONS
L
1
Ø d
Ø D
L
2
Outline
DIMENSIONS - resistor type and relevant physical dimensions
Ø Dmax.
L1 max.
L2 max.
TYPE
Ø d
0.58 0.05
VR25
2.5
6.5
7.5
Document Number: 28732
Revision: 14-Oct-09
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
197
VR25
High Ohmic/High Voltage
Metal Glaze Leaded Resistors
Vishay BCcomponents
PRODUCTS WITH RADIAL LEADS
P2
P
H1
H
H0
L1
W0
L
W
P0
P1
D0
F
DIMENSIONS - RADIAL TAPING
SYMBOL
PARAMETER
VALUE
12.7
12.7
3.85
6.35
4.8
TOLERANCE
UNIT
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
P
Pitch of components
Feed-hole pitch
1.0
P0
P1
P2
F
0.2
Feed-hole centre to lead at topside at the tape
Feed-hole center to body center
Lead-to-lead distance
0.5
1.0
+ 0.7/- 0
W
W0
H1
H0
H
Tape width
18.0
5.5
0.5
Minimum hold down tape width
Component height
-
Max.
0.5
1
29
Lead wire clinch height
16.5
19.5
4.0
Height of component from tape center
Feed-hole diameter
D0
L
0.2
-
Maximum length of snipped lead
Minimum lead wire (tape portion) shortest lead
11.0
2.5
L1
-
Note
• Please refer document number 28721 “Packaging” for more detail
MARKING
MASS PER UNIT
The nominal resistance and tolerance are marked on the
resistor using four or five colored bands in accordance with
IEC 60062, marking codes for resistors and capacitors.
MASS
(mg)
TYPE
Yellow and grey are used instead of gold and silver because
metal particles in the lacquer could affect high-voltage
properties.
VR25 52 mm
VR25 26 mm
212
148
OUTLINES
The length of the body (L1) is measured by inserting the
leads into holes of two identical gauge plates and moving
these plates parallel to each other until the resistor body is
clamped without deformation (IEC 60294).
FUNCTIONAL PERFORMANCE
PRODUCT CHARACTERIZATION
Standard values of nominal resistance are taken from the E96/E24/E12 series for resistors with a tolerance of 1 ꢀ, 5 ꢀ or
10 ꢀ. The values of the E96/E24/E12 series are in accordance with IEC 60063.
LIMITING VALUES
LIMITING VOLTAGE (1)
LIMITING POWER P70
Umax.
TYPE
(W)
DC
RMS
VR25
1600
1150
0.25
Notes
(1) The maximum voltage that may be continuously applied to the resistor element, see IEC 60115-1
• The maximum permissible hot-spot temperature is 155 °C
www.vishay.com
198
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28732
Revision: 14-Oct-09
VR25
High Ohmic/High Voltage
Metal Glaze Leaded Resistors
Vishay BCcomponents
20
The power that the resistor can dissipate depends
on the operating temperature.
^
Umax.
(kV)
Pmax.
(% Prated
)
100
50
0
10
8
6
- 55
0
50
100
155
(°C)
4
70
10- 2
10- 1
1
10
102
Tamb
Rn (MΩ)
Maximum dissipation (Pmax.) in percentage of rated power as a
Maximum allowed peak pulse voltage in accordance with
IEC 60065, 14.1.a; 50 discharges from a 1 nF capacitor
charged to Umax.; 12 discharges/min (drift ΔR/R ≤ 2 ꢀ)
function of the ambient temperature (Tamb
)
Derating
Pulse Loading Capability
50
40
30
20
10
0
50
ΔT
(K)
∆T
(K)
40
5 mm
10 mm
15 mm
30
20
10
0
0
0.1
0.2
0.3
0
0.1
0.2
0.3
P (W)
P (W)
Temperature rise (ΔT) at the lead end (soldering point)
as a function of dissipated power at various
lead lengths after mounting
Hot-spot temperature rise (ΔT) as a function of dissipated power
Application Information
Document Number: 28732
Revision: 14-Oct-09
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
199
VR25
High Ohmic/High Voltage
Metal Glaze Leaded Resistors
Vishay BCcomponents
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with
IEC 60115-1 specification, category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days).
In the Test Procedures and Requirements table the tests and
requirements are listed with reference to the relevant clauses
of IEC 60115-1 and IEC 60068-2-xx test methods. A short
description of the test procedure is also given. In some
instances deviations from the IEC recommendations were
necessary for our method of specifying.
The tests are carried out in accordance with IEC 60068-2-xx.
Test method under standard atmospheric conditions
according to IEC 60068-1, 5.3.
All soldering tests are performed with mildly activated flux.
TEST PROCEDURES AND REQUIREMENTS
IEC
IEC
60068-2-
60115-1
TEST
PROCEDURE
REQUIREMENTS
TEST
METHOD
CLAUSE
4.16
4.16.2
Robustness of terminations:
Tensile all samples
21 (Ua1)
21 (Ub)
Ø 0.6 mm; load 10 N; 10 s
Number of failures < 10 x 10-6
Number of failures < 10 x 10-6
Bending half number
of samples
Torsion other half
of samples
4.16.3
4.16.4
Ø 0.6 mm; load 5 N; 4 x 90°
No damage
ΔR max.: (0.5 ꢀ R + 0.05 Ω)
21 (Uc)
20 (Ta)
3 x 360° in opposite directions
2 s; 235 °C: Solder bath method; SnPb40
3 s; 245 °C: Solder bath method;
SnAg3Cu0.5
Good tinning (≥ 95 ꢀ covered); no
4.17
Solderability
damage
8 h steam or 16 h 155 °C;
leads immersed 6 mm;
for 2 s at 235 °C; solder bath (SnPb40)
for 3 s at 245 °C; solder bath
(SnAg3Cu0.5) method
Solderability
(after aging)
Good tinning (≥ 95 ꢀ covered); no
damage
Resistance to
soldering heat
Thermal shock: 10 s; 260 °C;
4.18
4.19
4.20
20 (Tb)
14 (Na)
29 (Eb)
ΔR max.: (0.5 ꢀ R + 0.05 Ω)
ΔR max.: (0.5 ꢀ R + 0.05 Ω)
3 mm from body
30 min at - 55 °C and
30 min at + 155 °C; 5 cycles
Rapid change of temperature
Bump
No damage
ΔR max.: (0.5 ꢀ R + 0.05 Ω)
3 x 1500 bumps in 3 directions; 40 g
Frequency 10 Hz to 500 Hz; displacement
1.5 mm or acceleration 10 g; 3 directions;
total 6 h (3 x 2 h)
No damage
ΔR max.: (0.5 ꢀ R + 0.05 Ω)
4.22
6 (Fc)
Vibration
4.23
4.23.2
Climatic sequence:
Dry heat
2 (Ba)
16 h; 155 °C
Damp heat (accelerated) 1st
cycle
4.23.3
30 (Db)
24 h; 55 °C; 90 ꢀ to 100 ꢀ RH
4.23.4
4.23.5
1 (Aa)
13 (M)
Cold
Low air pressure
Damp heat (accelerated)
remaining cycles
2 h; - 55 °C
2 h; 8.5 kPa; 15 °C to 35 °C
Rins min.: 103 MΩ
ΔR max.: (1.5 ꢀ R + 0.1 Ω)
4.23.6
30 (Db)
5 days; 55 °C; 95 ꢀ to 100 ꢀ RH
56 days; 40 °C; 90 ꢀ to 95 ꢀ RH;
Damp heat
(steady state)
4.24
78 (Cab)
dissipation 0.01 P70
;
ΔR max.: (1.5 ꢀ R + 0.1 Ω)
ΔR max.: (1.5 ꢀ R + 0.1 Ω)
limiting voltage U = 100 VDC
1000 h at 70 °C; P70 or Umax.
Between - 55 °C and + 155 °C
4.25.1
4.8
Endurance
Temperature coefficient
≤
200 ppm/K
URMS = 700 V during 1 min;
4.7
Voltage proof on insulation
Noise
No breakdown
Max. 5 µV/V
V-block method
IEC 60195
U = 500 VDC during 1 min;
4.12
4.6.1.1
Insulation resistance
Rins min.: 104 MΩ
V-block method
Room temperature;
dissipation 6.25 x P70 (voltage not more
than 2 x limiting voltage); 10 cycles;
5 s ON and 45 s OFF
4.13
4.26
Short time overload
ΔR max.: ± (2.0 ꢀ R + 0.05 Ω)
Active flammability
“cheese-cloth test”
Steps of: 5/10/16/25/40 x P70 duration
No flaming of gauze cylinder
5 min
www.vishay.com
200
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 28732
Revision: 14-Oct-09
VR25
High Ohmic/High Voltage
Metal Glaze Leaded Resistors
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2-
TEST
IEC
60115-1
CLAUSE
TEST
PROCEDURE
REQUIREMENTS
METHOD
No ignition of product;
no ignition of under-layer;
burning time less than 30 s
Passive flammability
“needle-flame test”
4.35
Application of test flame for 20 s
12NC INFORMATION FOR HISTORICAL CODING REFERENCE
• The resistors have a 12-digit numeric code starting with
Last Digit of 12NC Indicating Resistance Decade
2322 241
RESISTANCE DECADE
100 kΩ to 976 kΩ
1 MΩ to 9.76 MΩ
≥ 10 MΩ
LAST DIGIT
• The subsequent:
first digit for 1 ꢀ tolerance products (E24 and E96 series)
or 2 digits for 5 ꢀ (E24 series) and 10 ꢀ (E12 series)
indicate the resistor type and packing.
4
5
6
• The remaining digits indicate the resistance value:
- The first 3 digits for 1 ꢀ or 2 digits for 5 and 10 ꢀ
tolerance products indicate the resistance value.
12NC Example
The 12NC for a VR25, resistor value 7.5 MΩ, 5 ꢀ tolerance,
supplied on a bandolier of 1000 units in ammopack, is:
2322 241 13755.
- The last digit indicates the resistance decade.
12NC - Resistor type and packaging
2322 241 .....
BANDOLIER IN AMMOPACK
STRAIGHT LEADS
BANDOLIER
ON REEL
TOL.
(%)
TYPE
RADIAL TAPED
52 mm
26 mm
52 mm
52 mm
4000
units
1000
units
2000
units
5000
units
5000
units
1
5
0....
36...
38...
8....
13...
12...
-
7....
53...
52...
6....
23...
22...
VR25
43...
42...
10
Document Number: 28732
Revision: 14-Oct-09
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
201
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
232224186203
RESISTOR, METAL GLAZE/THICK FILM, 0.25 W, 1 %, 200 ppm, 620000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224186343
RESISTOR, METAL GLAZE/THICK FILM, 0.25 W, 1 %, 200 ppm, 634000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224186493
RESISTOR, METAL GLAZE/THICK FILM, 0.25 W, 1 %, 200 ppm, 649000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224187503
RESISTOR, METAL GLAZE/THICK FILM, 0.25 W, 1 %, 200 ppm, 750000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224188873
RESISTOR, METAL GLAZE/THICK FILM, 0.25 W, 1 %, 200 ppm, 887000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224189763
RESISTOR, METAL GLAZE/THICK FILM, 0.25 W, 1 %, 200 ppm, 976000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224213135
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 5 %, 200 ppm, 1300000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224213164
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 5 %, 200 ppm, 160000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224213165
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 5 %, 200 ppm, 1600000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224213166
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 5 %, 200 ppm, 16000000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224213184
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 5 %, 200 ppm, 180000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224213185
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 5 %, 200 ppm, 1800000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明