232224483606 [VISHAY]
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 36000000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;型号: | 232224483606 |
厂家: | VISHAY |
描述: | RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 36000000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT 电阻器 |
文件: | 总7页 (文件大小:189K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VR68
Vishay BCcomponents
High Ohmic (up to 68 MΩ)/High Voltage (up to 10 kV) Resistors
FEATURES
• Lead (Pb)-free solder contacts
•
These resistors meet the safety requirements of:
“UL1676” (510 kΩ to 11 MΩ); File No: E171160
“IEC 60065”
“EN60065”
REG.-Nr. 40003697
“VDE 0860” (Germany)
“CQC” (China)
• High pulse loading capability (10 kV)
• Small size (0718)
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compatible with "Restriction of the use of Hazardous
Substances" (RoHS) directive 2002/95/EC (issue 2004)
A metal glazed film is deposited on a high grade ceramic
body. After a helical groove has been cut in the resistive
layer, tinned electrolytic copper wires are welded to the
end-caps. The resistors are coated with a light blue lacquer
which provides electrical, mechanical, and climatic
protection.
The encapsulation is resistant to all cleaning solvents in
accordance with “MIL-STD 202E, method 215” and
“IEC 60068-2-45”.
APPLICATIONS
• Where high resistance, high stability and high reliability at
high voltage are required
• Safety component in combination with high voltage
• Picture tubes
• High voltage bleeders
• Cascade switches
TECHNICAL SPECIFICATIONS
DESCRIPTION
VALUE
Resistance range1)
100 kΩ to 68 MΩ
1 %: E24/E96 series;
5 %: E24 series
Resistance tolerance and series
Maximum dissipation at Tamb = 70 °C
Thermal resistance, Rth
Temperature coefficient
Maximum permissible voltage:
DC
1 W
70 K/W
≤
200 × 10-6/K
10 000 V
7000 V
700 V
RMS
Dielectric withstanding voltage of the insulation for 1 minute
Basic specifications
IEC 60115-1B
UL1676 (510 kΩ to 11 MΩ); EN60065; VDE 0860; CQC
55/155/56
Safety requirements
Climatic category (IEC 60068)
Stability after:
load (1000 hours)
ΔR max.: (1.5 % R + 0.1 Ω)
ΔR max.: (1.5 % R + 0.1 Ω)
ΔR max.: (1.5 % R + 0.1 Ω)
max. 2.5 µV/V
accelerated damp heat test (6 days)
long term damp heat test (56 days)
Noise
Note
1. Ohmic values (other than resistance range) are available upon request.
www.vishay.com
180
For technical questions, contact: ff3dresistors@vishay.com
Document Number: 28734
Revision: 04-Aug-06
VR68
High Ohmic (up to 68 MΩ)/
High Voltage (up to 10 kV) Resistors
Vishay BCcomponents
12NC INFORMATION
• The resistors have a 12-digit numeric code starting with
Last Digit of 12NC Indicating Resistance Decade
2322 244
RESISTANCE DECADE
LAST DIGIT
• The subsequent:
100 to 976 kΩ
1 to 9.76 MΩ
≥ 10 MΩ
4
5
6
first digit for 1 % tolerance products (E24 and E96 series)
or 2 digits for 5 % (E24 series) indicate the resistor type
and packing
• The remaining digits indicate the resistance value:
12NC Example
– The first 3 digits for 1 % or 2 digits for 5 % tolerance
products indicate the resistance value
The 12NC for a VR68, resistor value 7.5 MΩ, 5 % tolerance,
supplied on a bandolier of 500 units in ammopack, is:
2322 244 13755.
– The last digit indicates the resistance decade
12NC - resistor type and packing
ORDERING CODE 2322 244 .....
TAPE
TOL.
BANDOLIER IN AMMOPACK
BANDOLIER ON REEL
TYPE
WIDTH
(mm)
(%)
500
units
750
units
1
5
8....
-
VR68
66.7
13...
23...
PART NUMBER
PART NUMBER: VR68000001503JAC00
V
R
6
8
0
0
0
0
0
1
5
0
3
J
A
C
0
0
PACKAGING1)
MODEL/SIZE SPECIAL CHARACTER
TCR/MATERIAL
VALUE
TOLERANCE
SPECIAL
VR68000
0 = neutral
Z = value overflow
(Special)
0 = standard
3 digit value
1 digit multiplier
Multiplier:
3 = *103
F = 1 %
J = 5 %
AC
RD
The 2 digits
are used for
all special
parts.
4 = *104
00 = standard
5 = *105
PRODUCT DESCRIPTION: VR68 5 % AC 150K
VR68
5 %
AC
150K
MODEL/SIZE
TOLERANCE
PACKAGING1)
RESISTANCE VALUE
VR68
1 %
5 %
AC
RD
150K = 150 kΩ
8M2 = 8.2 MΩ
1) Please refer to table PACKAGING for details.
Note
Products can be ordered using either the 12NC or the PART NUMBER. The PART NUMBER is shown to facilitate the introduction of a unified
part numbering system. Currently, this PART NUMBER is applicable in the Americas and Asia only.
PACKAGING
CODE
PIECES
500
DESCRIPTION
MODEL/SIZE
AC
Bandolier in ammopack straight leads
Bandolier on reel straight leads
VR68
RD
750
Document Number: 28734
Revision: 04-Aug-06
For technical questions, contact: ff3dresistors@vishay.com
www.vishay.com
181
VR68
High Ohmic (up to 68 MΩ)/
High Voltage (up to 10 kV) Resistors
Vishay BCcomponents
DIMENSIONS
L
1
∅ d
∅ D
L
2
Outline
DIMENSIONS - resistor type and relevant physical dimensions
L1
MAX.
L2
MAX.
∅ D
MAX.
TYPE
∅ d
VR68
6.8
18.0
19.0
0.78 0.05
Yellow and grey are used instead of gold and silver because
metal particles in the lacquer could affect high-voltage
properties.
MASS PER 100 UNITS
MASS
(g)
TYPE
VR68
169.1
OUTLINES
The length of the body (L1) is measured by inserting the
leads into holes of two identical gauge plates and moving
these plates parallel to each other until the resistor body is
clamped without deformation (“IEC publication 60294”).
MARKING
The nominal resistance and tolerance are marked on the
resistor using four or five colored bands in accordance with
IEC publication 60062 “Color codes for fixed resistors”.
FUNCTIONAL PERFORMANCE
PRODUCT CHARACTERIZATION
Standard values of nominal resistance are taken from the E96/E24/E12 series for resistors with a tolerance of 1 % or 5 %. The
values of the E96/E24 series are in accordance with “IEC publication 60063”.
LIMITING VALUES
LIMITING VOLTAGE1)
LIMITING POWER
(W)
(V)
TYPE
DC
RMS
VR68
10 000
7000
1.0
Note
1. The maximum voltage that may be continuously applied to the resistor element, see “IEC publication 60115-1”.
The maximum permissible hot-spot temperature is 155 °C.
www.vishay.com
182
For technical questions, contact: ff3dresistors@vishay.com
Document Number: 28734
Revision: 04-Aug-06
VR68
High Ohmic (up to 68 MΩ)/
High Voltage (up to 10 kV) Resistors
Vishay BCcomponents
20
The power that the resistor can dissipate depends on the operating
temperature.
^
V
max
(kV)
P
max
(%P
)
rated
10
100
50
0
8
6
4
10
-2
-1
2
- 55
0
50 70
100
155
(°C)
10
1
10
10
(MΩ)
R
n
T
amb
Maximum dissipation (Pmax) in percentage of rated power
as a function of the ambient temperature (Tamb
Maximum allowed peak pulse voltage in accordance with
“IEC 60065 chapter 14.1”; 50 discharges from a 1 nF capacitor
charged to Vmax ; 12 discharges/minute (drift ΔR/R ≤ 2 %)
)
Derating
Pulse Loading Capability
50
80
ΔT
(K)
ΔT
(K)
10 mm
40
60
40
20
15 mm
30
20
10
0
0
0
0
0.4
0.8
1.2
0.4
0.8
1.2
P (W)
P (W)
Hot-spot temperature rise (ΔT) as a function of dissipated power
Temperature rise (ΔT) at the lead end (soldering point) as a function
of dissipated power at various lead lengths after mounting
Application Information
Document Number: 28734
Revision: 04-Aug-06
For technical questions, contact: ff3dresistors@vishay.com
www.vishay.com
183
VR68
High Ohmic (up to 68 MΩ)/
High Voltage (up to 10 kV) Resistors
Vishay BCcomponents
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with
the schedule of “IEC publication 60115-1”, category
LCT/UCT/56 (rated temperature range: Lower Category
Temperature, Upper Category Temperature; damp heat,
long term, 56 days). The testing also covers the
requirements specified by EIA and EIAJ.
In the Test Procedures and Requirements table the test
and requirements are listed with reference to the relevant
clauses of “IEC publications 60115-1 and 60068-2”; a short
description of the test procedure is also given. In some
instances deviations from the IEC recommendations were
necessary for our method of specifying.
The tests are carried out in accordance with IEC publication
60068-2, “Recommended basic climatic and mechanical
robustness testing procedure for electronic components” and
under standard atmospheric conditions according to
“IEC 60068-1”, subclause 5.3.
All soldering tests are performed with mildly activated flux.
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
METHOD
IEC
60115-1
CLAUSE
TEST
PROCEDURE
REQUIREMENTS
4.16
21 (U)
robustness of terminations:
tensile all samples
4.16.2
4.16.3
4.16.4
4.17
21 (Ua1)
21 (Ub)
21 (Uc)
20 (Ta)
20 (Tb)
14 (Na)
29 (Eb)
6 (Fc)
∅ 0.8 mm; load 10 N; 10 s
∅ 0.8 mm; load 5 N; 4 × 90°
3 × 360° in opposite directions
2 s; 235 °C
number of failures < 10 × 10−6
number of failures < 10 × 10−6
bending half number
of samples
torsion other half
of samples
no damage
ΔR max.: (0.5 % R + 0.05 Ω)
solderability
good tinning; no damage
ΔR max.: (0.5 % R + 0.05 Ω)
ΔR max.: (0.5 % R + 0.05 Ω)
4.18
resistance to
soldering heat
thermal shock: 3 s; 350 °C;
3 mm from body
4.19
rapid change of temperature
30 minutes at - 55 °C and
30 minutes at + 155 °C; 5 cycles
4.20
bump
3 × 1500 bumps in 3 directions; 40 g
no damage
ΔR max.: (0.5 % R + 0.05 Ω)
4.22
vibration
frequency 10 to 500 Hz; displacement 1.5 mm
no damage
or acceleration 10 g; 3 directions; total 6 hours ΔR max.: (0.5 % R + 0.05 Ω)
(3 × 2 hours)
4.23
climatic sequence:
dry heat
4.23.2
4.23.3
4.23.4
4.23.5
2 (Ba)
30 (Db)
1 (Aa)
13 (M)
16 hours; 155 °C
24 hours; 55 °C; 90 to 100 % RH
2 hours; - 55 °C
damp heat (accelerated) 1st
cycle
cold
low air pressure
2 hours; 8.5 kPa; 15 to 35 °C
www.vishay.com
184
For technical questions, contact: ff3dresistors@vishay.com
Document Number: 28734
Revision: 04-Aug-06
VR68
High Ohmic (up to 68 MΩ)/
High Voltage (up to 10 kV) Resistors
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
IEC
60115-1
CLAUSE
TEST
PROCEDURE
REQUIREMENTS
METHOD
4.23.6
30 (Db)
damp heat (accelerated)
remaining cycles
5 days; 55 °C; 95 to 100 % RH
Rins min.: 103 MΩ
ΔR max.: (1.5 % R + 0.1 Ω)
4.24.2
3 (Ca)
damp heat
(steady state)
56 days; 40 °C; 90 to 95 % RH;
dissipation 0.01 Pn;
ΔR max.: (1.5 % R + 0.1 Ω)
limiting voltage 100 V (DC)
4.25.1
4.8.4
4.7
endurance
1000 hours at 70 °C; Pn or Vmax
ΔR max.: (1.5 % R + 0.1 Ω)
temperature coefficient
voltage proof on insulation
noise
between - 55 °C and + 155 °C
(TC × 10-6/K)
≤
200
700 V (RMS) during 1 minute; V-block method
no breakdown
max. 2.5 µV/V
4.12
“IEC publication 60195”
4.6.1.1
4.13
insulation resistance
short time overload
500 V (DC) during 1 minute; V-block method
Rins min.: 104 MΩ
room temperature;
ΔR max.: (2.0 % R + 0.05 Ω)
dissipation 6.25 × Pn (voltage not more than
2 × limiting voltage; 10 000 V max.);
10 cycles; 5 s on and 45 s off
Document Number: 28734
Revision: 04-Aug-06
For technical questions, contact: ff3dresistors@vishay.com
www.vishay.com
185
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
232224483653
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 365000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224483833
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 383000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224483834
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 3830000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224483835
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 38300000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224483836
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 38300000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224484533
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 453000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224484534
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 4530000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224484536
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 45300000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224484643
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 464000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224484645
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 46400000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224484756
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 47500000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
232224485363
RESISTOR, METAL GLAZE/THICK FILM, 1 W, 1 %, 200 ppm, 536000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明