232224784995 [VISHAY]
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 4990000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED;型号: | 232224784995 |
厂家: | VISHAY |
描述: | RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 4990000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED 电阻器 |
文件: | 总4页 (文件大小:56K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SVR37
Vishay BCcomponents
Standard High Ohmic/High Voltage Resistors
FEATURES
• High working voltage, high pulse loading capability
• Metal glaze thick film resistive element
• Good stability and reliability
• Available in E24/E96 series
APPLICATIONS
• High Resistance, High Voltage applications
• Televisions and Monitors
• Power Supplies
• Electronic Ballast
• White Goods
DESCRIPTION
A metal glazed film is deposited on a high grade ceramic body. After a helical groove is cut in the resistive layer, connecting
wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps.
The resistors are coated with a light violet lacquer which provides electrical, mechanical and climatic protection. The
encapsulation is resistant to all cleaning solvents in accordance with “MIL-STD 202 E method 215” and “IEC 60068-2-45.”
TECHNICAL SPECIFICATIONS
DESCRIPTION
SVR37
DIN size
Resistance range(1)
0309
100 kΩ - 11 MΩ
± 5 %: E24 Series, ± 1 %: E24/E96 Series
0.50 W
Resistance tolerance and series
Max. rated dissipation, P70
Thermal resistance, Rth
120 K/W
Temperature coefficient
≤ 350 x 10-6 /K
3500 VDC/2500 Vrms
500 V
Operating voltage, Umax AC/DC(2)
Dielectric withstanding voltage of insulation for 1 minute
Climatic category (LCT/UCT/days) (IEC 60068)
Basic Specifications
55/156/56
IEC 60115-B
Stability, ∆R/R max., after:
load (1000 hours)
± 5 % ± 0.1 Ω
± 2 % ± 0.1 Ω
± 5 % ± 0.1 Ω
accelerated damp heat test (6 days)
long term damp heat test (56 days)
Note
1. Ohmic values (other than resistance range) are available on request.
2. Limiting element voltage is
PxR
12NC ORDERING CODE INDICATING RESISTOR TYPE AND PACKAGING
ORDERING CODE 2322 247 .....
DESCRIPTION
BANDOLIER IN AMMOPACK
1000 units
BANDOLIER ON REEL
5000 units
TYPE
TAPE WIDTH (mm)
TOL. (%)
± 1 %
8....
-
SVR37
52
± 5 %
13...
23...
LAST DIGIT OF 12NC
RESISTANCE DECADE
100 kΩ to 976 kΩ
1 MΩ to 9.76 MΩ
10 MΩ
LAST DIGIT
4
5
6
www.vishay.com
1
For technical questions contact: ff3dresistors@vishay.com
Document Number: 28749
Revision: 25-Feb-05
SVR37
Standard High Ohmic/
High Voltage Resistors
Vishay BCcomponents
ORDERING INFORMATION
Numeric Ordering Code (12NC)
Ordering Example
• The resistors have a 12-digit ordering code starting with
The ordering code of an SVR37 resistor value 2.7MΩ with
tolerance of ± ±1 % and supplied on a bandolier of 1000 units
in ammopack is 2322 247 82705.
2322 247.
• The subsequent first digit for 1 % tolerance products (E24
and E96 series) or 2 digits for 5 % (E24 series) indicate the
resistor type and packaging.
• The remaining digits indicate the resistance value. The first
three digits for 1 % or 2 digits for 5 % tolerance products
indicate the resistance value. The last digit indicates the
resistance in decade.
DIMENSIONS
L
D
2
d
MASS PER 100 UNITS
DIMENSIONS - leaded resistor type and relevant
physical dimensions
MASS
(g)
46
TYPE
SVR 37
dnom
Dmax
(mm)
L2max
(mm)
TYPE
SVR 37
(mm)
4.0
10.0
0.71
MARKING
The nominal resistance and tolerance are marked on the resistor using four or five color bands in accordance with “IEC publication
60062“ color codes for fixed resistors.
Yellow and grey colors are used instead of gold and silver because metal particles in lacquer could affect high voltage properties.
FUNCTIONAL PERFORMANCE
PRODUCT CHARACTERIZATION
Standard values of nominal resistance are taken from the E24/E96 series for resistors with tolerance of ± 1 %, ± 5 %. The values
of the E24/E96 series are in accordance with “IEC publication 60063”
LIMITING VALUES
LIMITING VOLTAGE (V)
TYPE
LIMITING POWER (W)
DC
RMS
SVR37
3500
2500
0.5
Note
1. The maximum voltage that may be continuously applied to the resistor element is in accordance with “IEC publication 60115-1”. The maximum
permissible hot spot temperature is 155 °C
DERATING CURVE
The power that the resistor can dissipate depends on the
operating temperature, shown in the figure
100
0
70
155
Ambient Temperature (°C)
Document Number: 28749
Revision: 25-Feb-05
For technical questions contact: ff3dresistors@vishay.com
www.vishay.com
2
SVR37
Standard High Ohmic/
High Voltage Resistors
Vishay BCcomponents
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
schedule of “IEC publication 60115-1, category LCT/UCT/56
(rated temperature range: Lower Category Temperature,
Upper category Temperature, damp heat, long term, 56
days). The testing also covers the requirements specified by
EIA and EIAJ.
and under standard atmospheric conditions according to IEC
60068-1, subclause 5.3.
In the Test Procedures and Requirements table the tests and
requirements are listed with reference to the relevant
clauses of IEC publications 60115-1 and 60068-2; a short
description of the test procedure is also given. In some
instances deviations from the IEC recommendations were
necessary for our method of specifying.
The tests are carried out in accordance with IEC publication
60068-2. “Recommended basic climatic and mechanical
robustness testing procedure for electronic components”
All soldering tests are performed with mildly activated flux.
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
METHOD
IEC
60115-1
CLAUSE
TEST
PROCEDURE
REQUIREMENTS
4.16
21 (U)
robustness of
terminations:
4.16.2
4.16.3
4.16.4
4.17
21 (Ua1)
21 (Ub)
21 (Uc)
20 (Ta)
20 (Tb)
14 (Na)
tensile all samples
load 10N; 10s
number of failures: < 10 x 10-6
number of failures: < 10 x 10-6
no damage, ∆R/R max.: ± (1 % + 0.05 Ω)
good tinning; no damage
bending half number
of samples
load 5N; 4 x 90°
torsion other half
number of samples
3 x 360° in opposite
directions
solderability
2 s; 235°C
4.18
resistance to soldering
heat
thermal shock; 3 s;
350 °C; 3mm from body
∆R/R max.: ± (2 % + 0.05 Ω)
4.19
rapid change of
temperature
30 minutes at - 55 °C and
30 minutes at + 155 °C; 5
cycles
∆R/R max.: ± (2 % + 0.1 Ω)
4.23
climatic sequence:
dry heat
4.23.2
4.23.3
2 (Ba)
16 h; 155 °C
30 (Db)
damp heat
(accelerated) 1st cycle
24 h; 55 °C;
90 to 100 % RH
4.23.4
4.23.5
1 (Aa)
13 (M)
cold
2 h; -±55 °C
low air pressure
2 h; 8.5 kPa; 15 - 35 °C
Rins min.: 103 MΩ
4.23.6
4.24.2
30 (Db)
3 (Ca)
damp heat,
(accelerated)
remaining cycles
5 days; 55 °C;
95 to 100 % RH;
∆R/R max.: ± (2 % + 0.1 Ω)
damp heat,
56 days; 40 °C;
∆R/R max.: ± (5 % + 0.1 Ω)
(steady state)
90 to 95 % RH; dissipation
0.01 Pn; limiting voltage
100V (DC)
4.25.1
4.8.4
−
−
endurance at 70 °C
1000 h loaded with Pn or
Vmax
∆R/R max.: ± (5 % + 0.1 Ω)
≤ ± 350
temperature coefficient between - 55 °C to + 155 °C;
(TC ppm/°C)
www.vishay.com
3
For technical questions contact: ff3dresistors@vishay.com
Document Number: 28749
Revision: 25-Feb-05
SVR37
Standard High Ohmic/
High Voltage Resistors
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
IEC
60068-2
TEST
IEC
60115-1
CLAUSE
TEST
PROCEDURE
REQUIREMENTS
METHOD
4.7
−
voltage proof on
insulation
500 V (RMS) during 1
minute; V-block method
no breakdown
4.6.1.1
−
insulation resistance
500 V (DC) during 1 minute;
V-block method
Rins min.: 104 MΩ
4.13
−
short time overload
room temperature;
∆R/R max.: ± (2 % + 0.1 Ω)
dissipation 6.25 x Pn
(voltage not more than 2 x
limiting voltage); 10 cycles;
5 s ON and 45 s OFF
Document Number: 28749
Revision: 25-Feb-05
For technical questions contact: ff3dresistors@vishay.com
www.vishay.com
4
相关型号:
232224785104
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 510000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785105
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 5100000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785114
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 511000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785115
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 5110000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785234
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 523000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785235
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 5230000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785364
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 536000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785495
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 5490000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785604
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 560000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785624
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 562000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785625
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 5620000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
232224785764
RESISTOR, METAL GLAZE/THICK FILM, 0.5 W, 1 %, 350 ppm, 576000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明