430P223X06K0
更新时间：2024-09-18 16:38:05
品牌：VISHAY
描述：CAPACITOR, METALLIZED FILM, POLYESTER, 6000V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED
概述
规格参数
数据手册430P223X06K0 概述
CAPACITOR, METALLIZED FILM, POLYESTER, 6000V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED 固定电容器
430P223X06K0 规格参数
| 生命周期： | Obsolete | 包装说明： | , |
| Reach Compliance Code： | unknown | ECCN代码： | EAR99 |
| HTS代码： | 8532.25.00.60 | 风险等级： | 5.73 |
| 电容： | 0.022 µF | 电容器类型： | FILM CAPACITOR |
| 介电材料： | POLYESTER | 安装特点： | THROUGH HOLE MOUNT |
| 负容差： | 20% | 端子数量： | 2 |
| 最高工作温度： | 85 °C | 最低工作温度： | -40 °C |
| 封装形状： | TUBULAR PACKAGE | 正容差： | 20% |
| 额定（直流）电压（URdc）： | 6000 V | 表面贴装： | NO |
| 端子形状： | WIRE | Base Number Matches： | 1 |
430P223X06K0 数据手册
通过下载430P223X06K0数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Type 430P HV
Vishay Sprague
Metalized Polyester Film Capacitors
Wrap-and-Fill
FEATURES
• 2000 WVDC to 10,000 WVDC
• High stability
• Extensive standard ratings
• Rugged construction
• Small size
GUIDE TO APPLICATION
The outer wrap is sufficient to withstand rated voltage to
ground. Where high peak currents (AC or reverse voltages)
areinvolved,contactSprague® todeterminedevicesuitability.
PERFORMANCE CHARACTERISTICS
PHYSICAL CHARACTERISTICS
Operating Temperature: - 40°C to + 85°C.
Lead Pull: 5 pounds (2.3 kilograms) for 1 minute.
No physical damage.
Capacitance Range: 0.001µF to 0.39µF.
Capacitance Tolerance: ± 20%, ± 10%.
Voltage Rating: 2000 WVDC to 10,000 WVDC.
Dissipation Factor: 1.0% maximum.
Lead Bend: After three complete consecutive bends,
no damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
Life Validation Test: Rated voltage for 2000 hours @ + 40°C.
No visible damage. No open or short circuits.
Maximum ∆ CAP ± 10%.
Voltage Test: 120% of rated voltage for 5 minutes
through a limiting resistor of 50,000 ohms minimum.
Insulation Resistance:
At + 25°C: 25,000 Megohm - Microfarads or 50,000
Megohm minimum.
At + 85°C: 2500 Megohm - Microfarads or 5000
Megohm minimum.
Minimum IR = 50% of initial limit.
Maximum DF = 1.25%.
Humidity Test: 95% relative humidity @ + 40°C for 250
hours. No visible damage.
Maximum ∆ CAP ± 10%.
Minimum IR = 20% of initial limit.
Maximum DF = 2.0%.
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DIMENSIONS in inches [millimeters]
1.750
[44.45]
Min.
L
1.750
[44.45]
Min.
D
Max.
± 0.062 [1.57]
Tinned Copper-Clad Steel Wire*
0.032 [0.81] Nominal Diameter (No. 20 AWG)
* Leads to be within ± 0.062" [1.57mm] of center line at egress but not less than 0.031" [0.78mm] from edge.
STANDARD RATINGS in inches [millimeters]
PART NUMBER
CASE SIZE
CAPACITANCE
± 20% TOLERANCE
± 10% TOLERANCE
D
L
(µF)
2000 WVDC
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
430P153X02K0
430P183X02K0
430P223X02K0
430P273X02K0
430P333X02K0
430P393X02K0
430P473X02K0
430P563X02K0
430P683X02K0
430P823X02K0
430P153X92K0
430P183X92K0
430P223X92K0
430P273X92K0
430P333X92K0
430P393X92K0
430P473X92K0
430P563X92K0
430P683X92K0
430P823X92K0
0.309 [7.85]
0.331 [8.41]
0.358 [9.09]
0.388 [9.86]
0.421 [10.69]
0.452 [11.48]
0.497 [12.62]
0.535 [13.59]
0.581 [14.76]
0.381 [9.68]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.750 [44.45]
For technical questions, contact spresale@vishay.com
Document Number: 42026
Revision 14-Nov-03
www.vishay.com
77
Type 430P HV
Vishay Sprague
STANDARD RATINGS in inches [millimeters]
CASE SIZE
PART NUMBER
CAPACITANCE
± 20% TOLERANCE
± 10% TOLERANCE
D
L
(µF)
2000 WVDC
0.1
430P104X02K0
430P124X02K0
430P154X02K0
430P184X02K0
430P224X02K0
430P274X02K0
430P334X02K0
430P394X02K0
430P104X92K0
430P124X92K0
430P154X92K0
430P184X92K0
430P224X92K0
430P274X92K0
430P334X92K0
430P394X92K0
4000 WVDC
0.413 [10.49]
0.446 [11.33]
0.498 [12.65]
0.537 [13.64]
0.585 [14.86]
0.640 [16.26]
0.699 [17.75]
0.753 [19.13]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
0.012
0.015*
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
430P222X04K0
430P272X04K0
430P332X04K0
430P392X04K0
430P472X04K0
430P562X04K0
430P682X04K0
430P822X04K0
430P103X04K0
430P123X04K0
430P153X04K0
430P183X04K0
430P223X04K0
430P273X04K0
430P333X04K0
430P393X04K0
430P473X04K0
430P563X04K0
430P683X04K0
430P823X04K0
430P104X04K0
430P124X04K0
430P154X04K0
430P184X04K0
430P224X04K0
430P222X94K0
430P272X94K0
430P332X94K0
430P392X94K0
430P472X94K0
430P562X94K0
430P682X94K0
430P822X94K0
430P103X94K0
430P123X94K0
430P153X94K0
430P183X94K0
430P223X94K0
430P273X94K0
430P333X94K0
430P393X94K0
430P473X94K0
430P563X94K0
430P683X94K0
430P823X94K0
430P104X94K0
430P124X94K0
430P154X94K0
430P184X94K0
430P224X94K0
0.304 [7.72]
0.328 [8.33]
0.355 [9.02]
0.379 [9.63]
0.326 [8.28]
0.348 [8.84]
0.376 [9.55]
0.406 [10.31]
0.440 [11.18]
0.484 [12.29]
0.531 [13.49]
0.375 [9.53]
0.407 [10.34]
0.452 [11.48]
0.490 [12.45]
0.525 [13.34]
0.568 [14.43]
0.613 [15.57]
0.667 [16.94]
0.725 [18.42]
0.793 [20.14]
0.862 [21.89]
0.956 [24.28]
1.040 [26.42]
1.143 [29.03]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.125 [28.34]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
1.750 [44.45]
0.12
0.15
0.18
0.22*
6000 WVDC
0.0015
0.0018
0.0022
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
430P152X06K0
430P182X06K0
430P222X06K0
430P332X06K0
430P392X06K0
430P472X06K0
430P562X06K0
430P682X06K0
430P822X06K0
430P103X06K0
430P123X06K0
430P153X06K0
430P183X06K0
430P223X06K0
430P152X96K0
430P182X96K0
430P222X96K0
430P332X96K0
430P392X96K0
430P472X96K0
430P562X96K0
430P682X96K0
430P822X96K0
430P103X96K0
430P123X96K0
430P153X96K0
430P183X96K0
430P223X96K0
0.307 [7.80]
0.328 [8.33]
0.355 [9.02]
0.418 [10.62]
0.354 [8.99]
0.381 [9.68]
0.410 [10.41]
0.445 [11.3]
0.489 [12.42]
0.531 [13.49]
0.574 [14.58]
0.632 [16.05]
0.684 [17.37]
0.749 [19.02]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
0.012
0.015
0.018
0.022
8000 WVDC
0.001
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
430P102X08K0
430P122X08K0
430P152X08K0
430P182X08K0
430P222X08K0
430P272X08K0
430P332X08K0
430P102X98K0
430P122X98K0
430P152X98K0
430P182X98K0
430P222X98K0
430P272X98K0
430P332X98K0
0.294 [7.47]
0.314 [7.98]
0.342 [8.69]
0.367 [9.32]
0.398 [10.11]
0.343 [8.71]
0.371 [9.42]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
* These ratings are stocked.
For technical questions, contact spresale@vishay.com
www.vishay.com
78
Document Number: 42026
Revision 14-Nov-03
Type 430P HV
Vishay Sprague
STANDARD RATINGS in inches [millimeters]
CASE SIZE
L
PART NUMBER
CAPACITANCE
± 20% TOLERANCE
± 10% TOLERANCE
D
(µF)
8000 WVDC (Continued)
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
0.012
0.015
0.018
0.022
430P392X08K0
430P472X08K0
430P562X08K0
430P682X08K0
430P822X08K0
430P103X08K0
430P123X08K0
430P153X08K0
430P183X08K0
430P223X08K0
430P392X98K0
430P472X98K0
430P562X98K0
430P682X98K0
430P822X98K0
430P103X98K0
430P123X98K0
430P153X98K0
430P183X98K0
430P223X98K0
0.397 [10.08]
0.429 [10.9]
0.471 [11.96]
0.510 [12.95]
0.551 [14.0]
0.600 [15.24]
0.650 [16.51]
0.717 [18.21]
0.779 [19.79]
0.853 [21.67]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
1.875 [47.63]
10,000 WVDC
0.001
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
430P102X010K
430P122X010K
430P152X010K
430P182X010K
430P222X010K
430P272X010K
430P332X010K
430P392X010K
430P472X010K
430P562X010K
430P682X010K
430P822X010K
430P103X010K
430P123X010K
430P153X010K
430P183X010K
430P223X010K
430P102X910K
430P122X910K
430P152X910K
430P182X910K
430P222X910K
430P272X910K
430P332X910K
430P392X910K
430P472X910K
430P562X910K
430P682X910K
430P822X910K
430P103X910K
430P123X910K
430P153X910K
430P183X910K
430P223X910K
0.337 [8.56]
0.357 [9.07]
0.368 [9.35]
0.337 [8.56]
0.360 [9.14]
0.388 [9.86]
0.417 [10.59]
0.445 [11.3]
0.480 [12.19]
0.516 [13.11]
0.560 [14.22]
0.617 [15.67]
0.662 [16.81]
0.717 [18.21]
0.793 [20.14]
0.862 [21.89]
0.946 [24.03]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
0.012
0.015
0.018
0.022*
* These ratings are stocked.
ORDERING INFORMATION
430P
473
X0
2K0
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING
X0 = ± 20%
X9 = ± 10%
This is expressed
in thousands of
volts. K denotes
the decimal point.
This is expressed in picofarads.
The first two digits are the
significant figures. The third is the
number of zeros to follow. Values
must conform to decade rating for
the tolerance specified.
HIGH VOLTAGE SAFETY PRECAUTIONS
Type 430P High Voltage capacitors have high insulation resistance. They will retain a significant charge for several days unless
an external discharge path is provided.
High voltage safety precautions must always be observed.
Good engineering design practice requires that equipment should always be designed to prevent accidental contact with
energized capacitors to avoid possible serious shock.
Additionally, discharged units may retain a residual charge as a result of dielectric absorption. This characteristic may produce
an apparent recharging phenomenon even though no voltage is applied.
Care must be taken to assure capacitors are properly discharged.
If voltage has been applied to these capacitors, a wire or other short circuit should be fixed between the capacitor terminals for
a period of at least 3 hours prior to subsequent handling.
For technical questions, contact spresale@vishay.com
Document Number: 42026
Revision 14-Nov-03
www.vishay.com
79
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
430P223X06K0 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| 430P223X08K0 | VISHAY | CAPACITOR, METALLIZED FILM, POLYESTER, 8000V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED | 获取价格 |
|
| 430P223X5400 | VISHAY | Metalized Polyester Film Capacitors Wrap-and-Fill | 获取价格 |
|
| 430P223X5600 | VISHAY | Metalized Polyester Film Capacitors Wrap-and-Fill | 获取价格 |
|
| 430P223X910K | VISHAY | CAPACITOR, METALLIZED FILM, POLYESTER, 10000V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED | 获取价格 |
|
| 430P223X9400 | VISHAY | Metalized Polyester Film Capacitors Wrap-and-Fill | 获取价格 |
|
| 430P223X9600 | VISHAY | Metalized Polyester Film Capacitors Wrap-and-Fill | 获取价格 |
|
| 430P223X96K0 | VISHAY | CAPACITOR, METALLIZED FILM, POLYESTER, 6000V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED | 获取价格 |
|
| 430P223X98K0 | VISHAY | CAPACITOR, METALLIZED FILM, POLYESTER, 8000V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED | 获取价格 |
|
| 430P224X5050 | VISHAY | Metalized Polyester Film Capacitors Wrap-and-Fill | 获取价格 |
|
| 430P224X5100 | VISHAY | Metalized Polyester Film Capacitors Wrap-and-Fill | 获取价格 |
|
430P223X06K0 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 5
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 8
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
