4N32-X019 [VISHAY]
Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, ROHS COMPLIANT, SMD, 6 PIN;
| 型号： | 4N32-X019 |
| 厂家： | 
VISHAY |
| 描述： | Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, ROHS COMPLIANT, SMD, 6 PIN 输出元件 |
| 文件： | 总6页 (文件大小：131K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
4N32, 4N33
Vishay Semiconductors
Optocoupler, Photodarlington Output, High Gain,
with Base Connection
FEATURES
1
6
A
C
B
C
E
• Very high current transfer ratio, 500 % min.
• High isolation resistance, 1011 typical
• Standard plastic DIP package
5
4
2
3
NC
• Compliant to RoHS Directive to 2002/95/EC
and in accordance WEEE 2002/96/EC
i179005_1
V
D
E
AGENCY APPROVALS
i179005
• UL1577, file no. E52744 system code H
• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5
(pending), avialable with option 1
DESCRIPTION
The 4N32 and 4N33 are optically coupled isolators with a
gallium arsenide infrared LED and a solicon photodarlington
sensor.
• BSI IEC60950; IEC60065
• FIMKO
Switching can be achieved while maintaining a high degree
of isolation between driving and load circuits.
These optocouplers can be used to replace reed and
mercury relays with advantages of long life, high speed
switching and elimination of magnetic fields.
ORDERING INFORMATION
DIP
Option 6
4
N
3
#
-
X
0
#
#
T
10.16 mm
Option 9
7.62 mm
Option 7
PART NUMBER
PACKAGE OPTION
TAPE AND
REEL
> 0.1 mm
> 0.7 mm
AGENCY CERTIFIED/PACKAGE
UL, BSI, FIMKO
DIP-6
CTR (%)
500
4N32
500
4N33
DIP-6, 400 mil, option 6
SMD-6, option 7
SMD-6, option 9
VDE, UL, BSI, FIMKO
DIP-6
4N32-X006
4N32-X007T (1)
4N32-X009T (1)
500
-
4N33-X007T (1)
4N33-X009T (1)
500
4N32-X001
4N32-X017T
4N33-X001
4N33-X017T (1)
SMD-6, option 7
Notes
•
(1)
Additional options may be possible, please contact sales office.
Also available in tubes, do not put T on the end.
Document Number: 81865
Rev. 1.2, 15-Feb-11
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com
1
4N32, 4N33
Vishay Semiconductors
Optocoupler, Photodarlington
Output, High Gain, with Base
Connection
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
IF
3
V
mA
Forward current
60
Power dissipation
Derate linearly
Pdiss
100
1.33
mW
from 55 °C
mW/°C
OUTPUT
Collector emitter breakdown voltage
Emitter base breakdown voltage
Collector base breakdown voltage
Emitter collector breakdown voltage
Collector (load) current
Power dissipation
Derate linearly
BVCEO
BVEBO
BVCBO
BVECO
IC
30
8
V
V
50
5
V
V
100
150
2
mA
mW
mW/°C
Pdiss
COUPLER
Total dissipation
Ptot
250
mW
mW/°C
VRMS
mm min.
mm min.
Derate linearly
3.3
Isolation test voltage (between emitter
Leakage path
1 s
VISO
5300
7
7
Air path
V
IO = 500 V, Tamb = 25 °C
RIO
RIO
1012
1011
Isolation resistance
V
IO = 500 V, Tamb = 100 °C
Storage temperature
Operating temperature
Lead soldering time (1)
Tstg
Tamb
- 55 to + 150
- 55 to + 100
10
°C
°C
at 260 °C
s
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
(1)
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
IF = 50 mA
VF
IR
1.25
0.1
25
1.5
V
Reverse current
V
V
R = 3 V
R = 0 V
100
μA
pF
Capacitance
CO
OUTPUT
Collector emitter breakdown voltage (1)
Collector base breakdown voltage (1)
Emitter base breakdown voltage (1)
Emitter collector breakdown voltage (1)
Collector emitter leakage current
IC = 100 μA, IF = 0
IC = 100 μA, IF = 0
IC = 100 μA, IF = 0
IC = 100 μA, IF = 0
BVCEO
BVCBO
BVEBO
BVECO
ICEO
30
50
8
V
V
V
5
10
1
V
VCE = 10 V, IF = 0
100
nA
I
C = 0.5 mA, VCE = 5 V
hFE
13
COUPLER
Collector emitter saturation voltage
Coupling capacitance
VCEsat
1
V
1.5
pF
Notes
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Indicates JEDEC registered values.
(1)
www.vishay.com
2
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 81865
Rev. 1.2, 15-Feb-11
4N32, 4N33
Vishay Semiconductors
Optocoupler, Photodarlington
Output, High Gain, with Base
Connection
CURRENT TRANSFER RATIO
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
TYP.
MAX.
UNIT
Current transfer ratio
V
CE = 10 V, IF = 10 mA
CTR
500
%
SWITCHING CHARACTERISTICS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
MAX.
5
UNIT
μs
Turn-on time
Turn-off time
V
CC = 10 V, IC = 50 mA
ton
toff
IF = 200 mA, RL = 180
100
μs
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Climatic classification
(according to IEC 68 part 1)
55/100/21
Comparative tracking index
CTI
175
8000
890
399
VIOTM
V
VIORM
V
PSO
700
400
175
mW
mA
°C
ISI
TSI
Creepage distance
Clearance distance
Creepage distance
Clearance distance
Standard DIP-6
Standard DIP-6
400 mil DIP-6
400 mil DIP-6
7
7
8
8
mm
mm
mm
mm
Insulation thickness,
reinforced rated
per IEC 60950 2.10.5.1
0.4
mm
Note
•
As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.2
1.0
0.8
10
Normalized to:
VCE = 5 V
Normalized to:
VCE = 5 V
V
CE = 5 V
IF = 10 mA
1
IF = 10 mA
TA = 25 °C
TA = 25 °C
VCE = 1 V
VCE = 5 V
0.6
0.4
0.1
0.01
0.2
0.0
V
CE = 1 V
0.001
0.1
1
10
100 1000
10
IF - LED Current (mA)
100
0.1
1
IF - LED Current (mA)
i4n32-33_02
i4n32-33_03
Fig. 1 - Normalized Non-Saturated and Saturated CTRCE vs.
LED Current
Fig. 2 - Normalized Non-Saturated and Saturated Collector Emitter
Current vs. LED Current
Document Number: 81865
Rev. 1.2, 15-Feb-11
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com
3
4N32, 4N33
Vishay Semiconductors
Optocoupler, Photodarlington
Output, High Gain, with Base
Connection
10
20
15
Normalized to:
VCB = 3.5 V
1 kΩ
TA = 25 °C
VCC = 5 V
1
IF = 10 mA
VTH = 1.5 V
TA = 25 °C
0.1
10
5
100 Ω
0.01
0.001
0
0.1
1
10
100
0
5
10
15
20
i4n32-33_04
IF = LED Current (mA)
IF - LED Current (mA)
i4n32-33_07
Fig. 3 - Normalized Collector Base Photocurrent vs.
LED Current
Fig. 6 - High to Low Propagation Delay vs.
Collector Load Resistance and LED Current
10 000
TA = 25 °C
VCE = 5 V
IF
8000
VCC
RL
6000
4000
tD
tR
VO
VO
tPLH
IF
VCE = 1 V
2000
VTH = 1.5 V
tF
tPHL
tS
0
0.01
i4n32-33_08
0.1
1
10
100
i4n32-33_05
Ib - Base Current (µA)
Fig. 4 - Non-Saturated and Saturated hFE vs.
Base Current
Fig. 7 - Switching Waveform and Switching Schematic
80
TA = 25 °C, VCC = 5 V
VTH = 1.5 V
1 kΩ
60
220 Ω
40
470 Ω
20
100 Ω
0
0
5
10
15
20
i4n32-33_06
IF - LED Current (mA)
Fig. 5 - Low to High Propagation Delay vs.
Collector Load Resistance and LED Current
www.vishay.com
4
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 81865
Rev. 1.2, 15-Feb-11
4N32, 4N33
Vishay Semiconductors
Optocoupler, Photodarlington
Output, High Gain, with Base
Connection
PACKAGE DIMENSIONS in millimeters
DIP-6 Package Dimensions
Pin one ID
2
1
3
6.4 0.1
ISO method A
7.62 typ.
4
5
6
8.6 0.1
1.2 0.1
1 min.
3.555 0.255
18°
4° typ.
2.95 0.5
0.8 min.
0.85 0.05
0.25 typ.
3° to 9°
0.5 0.05
7.62 to 8.81
i178004
2.54 typ.
Option 7
Option 9
Option 6
10.3 max.
7.62 typ.
7.62 typ.
7.62 typ.
0.7 min.
0.1 0.1
0.6 min.
3.6 0.3
3.5 0.3
0.1 min.
4.3 0.3
0.6 min.
8 min.
2.55 0.25
10.3 max.
8 min.
10.16 typ.
0.76
1.78
0.76
R 0.25
R 0.25
2.54
2.54
1.78
1.52
8 min.
11.05
1.52
8 min.
11.05
20802-24
PACKAGE MARKING
4N32
-X017
V YWW H 68
21764-18
Notes
•
•
•
•
Example marking for 4N32-X017T.
Only options 1, and 7 reflected in the package marking.
The VDE logo is only marked on option 1 parts.
Tape and reel suffix (T) is not part of the package marking.
Document Number: 81865
Rev. 1.2, 15-Feb-11
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
©2020 ICPDF网 联系我们和版权申明