678D108M016DM3DE3 [VISHAY]
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 16 V, 1000 uF, THROUGH HOLE MOUNT, CAN, RADIAL LEADED, ROHS COMPLIANT;
| 型号： | 678D108M016DM3DE3 |
| 厂家： | 
VISHAY |
| 描述： | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 16 V, 1000 uF, THROUGH HOLE MOUNT, CAN, RADIAL LEADED, ROHS COMPLIANT 电容器 |
| 文件： | 总6页 (文件大小：120K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
678D
Vishay Sprague
www.vishay.com
Aluminum Capacitors
105 °C, Miniature, Radial Lead
FEATURES
• Improved SMPS output capacitors
• Highest ripple current ratings per case size
• High CV
Available
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
RIPPLE CURRENT MULTIPLIERS
DESCRIPTION
VALUE
TEMPERATURE
Nominal case size
0.394 x 0.472 [10.0 x 12.0]
to 0.709 x 1.575 [18.0 x 40.0]
AMBIENT TEMPERATURE
MULTIPLIERS
Ø D x L in inches [mm]
+105 °C
+85 °C
+75 °C
1.0
2.2
2.7
3.0
Operating temperature
Rated capacitance range, CR
Tolerance on CR
-55 °C to +105 °C
33 μF to 6800 μF
20 ꢀ
+65 °C
Rated voltage range, UR
6.3 WVDC to 63 WVDC
FREQUENCY (Hz)
WVDC 50 TO 60 100 TO 120 300 TO 400 1K TO 19K 20K TO 200K
6.3 to 63 0.60 0.70 0.75 0.82 1.0
2 and 3 radial leads and axial
mount.
Termination
4000 h (0.512" [13.0] diameter):
3000 h (0.394" [10.0] diameter):
CAP 20 ꢀ (6.3 WVDC to
25 WVDC),
LOW TEMPERATURE PERFORMANCE
CAPACITANCE RATIO C-55 °C / C+25 °C MINIMUM AT 120 Hz
Life validation test at 105 °C
15 ꢀ (40 WVDC to 63 WVDC
from initial measurement.
ESR 1.3 x initial
)
VOLTAGE
6.3 V to 16 V
25 V to 63 V
VOLTAGE
MULTIPLIER
MAXIMUM
CAPACITANCE
CHANGE
specified limit.
0.75
0.85
DCL 2 x initial specified limit.
1000 h: CAP 20 ꢀ
MULTIPLIER
2.0
MAXIMUM
IMPEDANCE
CHANGE
(6.3 WVDC to 25 WVDC),
6.3 V to 16 V
25 V to 63 V
15 ꢀ (40 WVDC to 63 WVDC
from initial measurements.
ESR 1.3 x initial
)
Shelf life at 105 °C
DC leakage current
1.5
ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz)
specified limit.
NOMINAL
DIAMETER
0.394
[10.0]
0.512
[13.0]
0.630
[16.0]
0.709
[18.0]
I = 0.01 CV (2 min charge time)
I = 0.03 CV (1 min charge time)
I in μA, C in μF, V in Volts
TYPICAL ESL (nH)
4.0
7.0
10.0
12.0
Revision: 18-Jul-16
Document Number: 42055
1
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
678D
Vishay Sprague
www.vishay.com
BULK SPECIFICATIONS in millimeters
TERMINAL CODE C
TERMINAL CODE D
9.5 min.
20 min.
15 min.
S
L
S
L
W
W
+
+
D
D
-
-
Sleeve
Sleeve
7.1 min.
TERMINAL CODE J (1)
TERMINAL CODE O (2)
9.5 1.6
25 min.
25 min.
S
L
L
S
W
W
T
+
+
NC
D
D
-
NC
-
5.0 1.6
25 min.
Sleeve
Sleeve
Third lead may fall
within 20° of C
L
7.1 1.6
Notes
+
Positive terminal
Negative terminal
No charge potential
Available for 12.5 mm, 16 mm, and 18 mm diameter units
-
NC
(1)
(2)
Available for 12.5 mm, 16 mm, and 18 mm diameter units with epoxy end-seal
DIMENSIONS in inches [millimeters]
NOMINAL
STYLES 2 AND 4
STYLES 3 AND 5
D (max.) L (max.)
LEAD SPACING
0.024 0.020
LEAD DIAMETER
CASE
CODE
S
T
D
L
D (max.) L (max.)
NOMINAL
AWG
[0.60] [0.50]
CC
CD
CG
DG
DK
DM
DT
DS
EK
EN
ER
EU
FR
FV
0.394[10.0] 0.512[13.0] 0.413[10.5] 0.563[14.3] 0.413[10.5] 0.630[16.0] 0.197[5.0]
0.394[10.0] 0.630 [16.0] 0.413[10.5] 0.669[17.0] 0.413[10.5] 0.740 [18.8] 0.197[5.0]
0.394[10.0] 0.787[20.0] 0.413[10.5] 0.846[21.5] 0.413[10.5] 0.906[23.0] 0.197[5.0]
n/a
n/a
n/a
0.025 [0.63]
0.025 [0.63]
0.025 [0.63]
22
22
22
20
20
20
20
20
20
20
20
20
20
20
0.492[12.5] 0.787[20.0] 0.512[13.0] 0.846[21.5] 0.512[13.0] 0.906[23.0] 0.197[5.0] 0.098[2.5] 0.032 [0.81]
0.492[12.5] 0.984[25.0] 0.512[13.0] 1.043[26.5] 0.512[13.0] 1.142[29.0] 0.197[5.0] 0.098[2.5] 0.032 [0.81]
0.492[12.5] 1.043[26.5] 0.512[13.0] 1.102 [28.0] 0.512[13.0] 1.161 [29.5] 0.197[5.0] 0.098[2.5] 0.032 [0.81]
0.492[12.5] 1.319 [33.5] 0.512[13.0] 1.346 [34.2] 0.512[13.0] 1.417 [36.0] 0.197[5.0] 0.098[2.5] 0.032 [0.81]
0.492[12.5] 1.673 [42.5] 0.512[13.0] 1.720 [43.7] 0.512[13.0] 1.791 [45.5] 0.197[5.0] 0.098[2.5] 0.032 [0.81]
0.630[16.0] 0.984 [25.0] 0.650[16.5] 1.031 [26.2] 0.650[16.5] 1.098 [27.9] 0.295[7.5] 0.150[3.8] 0.032 [0.81]
0.630[16.0] 1.260[32.0] 0.650[16.5] 1.319[33.5] 0.650[16.5] 1.417[36.0] 0.295[7.5] 0.150[3.8] 0.032 [0.81]
0.630[16.0] 1.417[36.0] 0.650[16.5] 1.476[37.5] 0.650[16.5] 1.575[40.0] 0.295[7.5] 0.150[3.8] 0.032 [0.81]
0.630[16.0] 1.575 [40.0] 0.650[16.5] 1.642 [41.7] 0.650[16.5] 1.669[42.4] 0.295[7.5] 0.150[3.8] 0.032 [0.81]
0.709[18.0] 1.417[36.0] 0.728[18.5] 1.476[37.5] 0.728[18.5] 1.575[40.0] 0.295[7.5] 0.150[3.8] 0.032 [0.81]
0.709[18.0] 1.575 [40.0] 0.728[18.5] 1.653[42.0] 0.728[18.5] 1.693[43.0] 0.295[7.5] 0.150[3.8] 0.032 [0.81]
Revision: 18-Jul-16
Document Number: 42055
2
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
678D
Vishay Sprague
www.vishay.com
TAPE AND REEL, SPECIFICATIONS TO EIA-468D in inches [millimeters]
Formed Leads
P
K
H
H0
F
W
W0
L1
D0
P0
d
DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES
CASE SIZE
F LEAD SPACING
STD. QTY/REEL
0.236 x 0.453 [6.0 x 11.0]
0.315 x 0.472 [8.0 x 12.0]
0.197 [5.0]
800
700
0.197 [5.0]
Unformed (Straight) Leads
P
H
F
W0
W
L1
D0
d
P0
f
DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES
CASE SIZE
F LEAD SPACING
STD. QTY/REEL
0.236 x 0.453 [6.0 x 11.0]
0.315 x 0.472 [8.0 x 12.0]
0.394 x 0.512 [10.0 x 13.0]
0.394 x 0.630 [10.0 x 16.0]
0.394 x 0.787 [10.0 x 20.0]
0.098 [2.5]
800
700
500
500
500
0.140 (1) [3.5]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
Note
(3)
Available as special order.
Revision: 18-Jul-16
Document Number: 42055
3
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
678D
Vishay Sprague
www.vishay.com
DIMENSIONS in inches [millimeters]
CASE SIZE (DIAMETER x LENGTH)
ITEM
0.236 x 0.433
[6.0 x 11.0]
0.315 x 0.472
0.394 x 0.512
[10.0 x 13.0]
0.394 x 0.630
0.394 x 0.787
[10.0 x 20.0]
[8.0 x 12.0]
0.025 [0.63]
0.500 [12.7]
0.500 [12.7]
0.197 [5.0]
0.157 [4.0]
0.787 [20.0]
0.630 [16.0]
0.709 [18.0]
0.591 [15.0]
0.157 [4.0]
0.028 [0.7]
0.118 [3.0]
[10.0 x 16.0]
0.025 [0.63]
0.500 [12.7]
0.500 [12.7]
0.197 [5.0]
n/a
d - Lead-wire diameter
P - Pitch of component
P0 - Feed hole pitch
0.025 [0.63]
0.500 [12.7]
0.500 [12.7]
0.197 [5.0]
0.098 [2.5]
0.728 [18.5]
0.630 [16.0]
0.709 [18.0]
0.591 [15.0]
0.157 [4.0]
0.028 [0.7]
0.118 [3.0]
0.025 [0.63]
0.500 [12.7]
0.500 [12.7]
0.197 [5.0]
n/a
0.025 [0.63]
0.500 [12.7]
0.500 [12.7]
0.197 [5.0]
n/a
F - Lead-to-lead distance
K - Clinch height
H - Height of component from tape center
H0 - Lead-wire clinch height
W - Tape width
0.906 [23.0]
n/a
0.906 [23.0]
n/a
0.906 [23.0]
n/a
0.709 [18.0]
0.591 [15.0]
0.157 [4.0]
0.028 [0.7]
0.118 [3.0]
0.709 [18.0]
0.591 [15.0]
0.157 [4.0]
0.028 [0.7]
0.118 [3.0]
0.709 [18.0]
0.591 [15.0]
0.157 [4.0]
0.028 [0.7]
0.118 [3.0]
W0 - Hold down tape width
D0 - Feed hole diameter
t - Total tape thickness
L1 - Maximum lead protrusion
Note
•
Terminal code “I” = tape and reel. Terminal code “+” = tape and ammo.
Positive leader is standard. Negative leader is available by special order.
ORDERING EXAMPLE
Electrolytic capacitor 678D series: 678D 108 M 6R3 DG 3 D
DESCRIPTION
CODE
678D
108
M
EXPLANATION
Product type
Capacitance value (1000 μF)
Tolerance (M = 20 ꢀ)
Voltage rating at 105 °C (6R3 = 6.3 V)
Can size (see Dimensions table)
6R3
DG
3
Sleeve and sealing (3 = P.V.C. sleeve w/epoxy end seal)
Terminal code / packaging (D = bulk; straight leads)
D
Note
•
For lead (Pb)-free / RoHS compliant products add suffix “E3” to part number.
Example: 678D108M6R3DG3DE3
ELECTRICAL DATA AND ORDERING INFORMATION
MAX. ESR
AT +25 °C ()
MAX. RIPPLE
AT +105 °C (A)
MAX.
CAPACITANCE
NOMINAL CASE SIZE
D x L
IMPEDANCE
AT +25 °C ()
100 kHz
PART NUMBER
(μF)
20 Hz
20 kHz
20 kHz to 100 kHz
6.3 WVDC at 105 °C, SURGE = 9 V
330.0
470.0
678D337M6R3CC3D 0.394 x 0.512 [10.0 x 13.0]
678D477M6R3CD3D 0.394 x 0.630 [10.0 x 16.0]
678D108M6R3DG3D 0.492 x 0.787 [12.5 x 20.0]
678D228M6R3EK3D 0.630 x 0.984 [16.0 x 25.0]
678D338M6R3DS3D 0.492 x 1.673 [12.5 x 42.5]
678D478M6R3FR3D 0.709 x 1.417 [18.0 x 36.0]
0.540
0.340
0.200
0.110
0.067
0.066
0.213
0.133
0.071
0.041
0.031
0.029
0.36
0.49
0.83
1.36
1.67
2.02
0.213
0.132
0.070
0.045
0.032
0.031
1000.0
2200.0
3300.0
4700.0
10 WVDC AT 105 °C, SURGE = 13 V
330.0
470.0
678D337M010CD3D 0.394 x 0.630 [10.0 x 16.0]
0.350
0.235
0.120
0.115
0.085
0.070
0.135
0.092
0.062
0.042
0.038
0.031
0.46
0.63
0.98
1.52
1.56
1.97
0.134
0.090
0.061
0.046
0.041
0.033
678D477M010CG3D 0.394 x 0.787 [10.0 x 20.0]
678D108M010DM3D 0.492 x 1.043 [12.5 x 26.5]
678D228M010EK3D 0.630 x 0.984 [16.0 x 25.0]
678D338M010EN3D 0.630 x 1.260 [16.0 x 32.0]
678D487M010FR3D 0.709 x 1.417 [18.0 x 36.0]
1000.0
2200.0
3300.0
4700.0
Revision: 18-Jul-16
Document Number: 42055
4
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
678D
Vishay Sprague
www.vishay.com
ELECTRICAL DATA AND ORDERING INFORMATION
MAX. ESR
MAX. RIPPLE
MAX.
CAPACITANCE
(μF)
NOMINAL CASE SIZE
D x L
AT +25 °C ()
AT +105 °C (A)
IMPEDANCE
AT +25 °C ()
100 kHz
PART NUMBER
20 Hz
20 kHz
20 kHz to 100 kHz
16 WVDC AT 105 °C, SURGE = 20 V
220.0
330.0
678D227M016CC3D 0.394 x 0.512 [10.0 x 13.0]
678D337M016CD3D 0.394 x 0.630 [10.0 x 16.0]
678D477M016CG3D 0.394 x 0.787 [10.0 x 20.0]
678D108M016DM3D 0.492 x 1.043 [12.5 x 26.5]
678D228M016ER3D 0.630 x 1.417 [16.0 x 36.0]
678D338M016FR3D 0.709 x 1.417 [18.0 x 36.0]
0.585
0.370
0.250
0.130
0.074
0.074
0.217
0.137
0.098
0.066
0.032
0.032
0.40
0.52
0.70
1.00
1.78
1.94
0.217
0.136
0.094
0.065
0.034
0.034
470.0
1000.0
2200.0
3300.0
20 WVDC AT 105 °C, SURGE = 30 V
220.0
330.0
678D227M020CD3D 0.394 x 0.630 [10.0 x 16.0]
0.380
0.270
0.250
0.115
0.077
0.061
0.150
0.100
0.077
0.048
0.032
0.026
0.41
0.61
0.45
0.78
1.80
2.25
0.148
0.098
0.075
0.045
0.034
0.028
678D337M020CG3D 0.394 x 0.787 [10.0 x 20.0]
678D477M020DG3D 0.492 x 0.787 [12.5 x 20.0]
678D108M020DT3D 0.492 x 1.280 [12.5 x 33.5]
678D228M020ER3D 0.630 x 1.417 [16.0 x 36.0]
678D338M020FV3D 0.709 x 1.575 [18.0 x 40.0]
470.0
1000.0
2200.0
3300.0
25 WVDC AT 105 °C, SURGE = 35 V
100.0
220.0
330.0
470.0
1000.0
2200.0
678D107M025CC3D 0.394 x 0.512 [10.0 x 13.0]
0.700
0.300
0.270
0.160
0.090
0.062
0.250
0.105
0.078
0.067
0.034
0.026
0.32
0.59
0.79
0.97
1.60
2.22
0.250
0.100
0.076
0.068
0.036
0.028
678D227M025CG3D 0.394 x 0.787 [10.0 x 20.0]
678D337M025DG3D 0.492 x 0.787 [12.5 x 20.0]
678D477M025DM3D 0.492 x 1.043 [12.5 x 26.5]
678D108M025DS3D 0.492 x 1.673 [12.5 x 42.5]
678D228M025FV3D 0.709 x 1.575 [18.0 x 40.0]
40 WVDC AT 105 °C, SURGE = 55 V
47.0
100.0
330.0
470.0
1000.0
678D476M040CC3D 0.394 x 0.512 [10.0 x 13.0]
0.950
0.580
0.200
0.133
0.080
0.265
0.165
0.068
0.046
0.033
0.28
0.38
0.93
1.28
1.76
0.265
0.165
0.070
0.050
0.035
678D107M040CD3D 0.394 x 0.630 [10.0 x 16.0]
678D337M040DM3D 0.492 x 1.043 [12.5 x 26.5]
678D477M040EK3D 0.630 x 0.984 [16.0 x 25.0]
678D108M040ER3D 0.630 x 1.417 [16.0 x 36.0]
50 WVDC AT 105 °C, SURGE = 75 V
47.0
100.0
220.0
330.0
470.0
1000.0
678D476M050CC3D 0.394 x 0.512 [10.0 x 13.0]
1.250
0.520
0.240
0.150
0.110
0.077
0.275
0.115
0.069
0.048
0.036
0.028
0.28
0.57
0.93
1.26
1.55
2.15
0.275
0.112
0.071
0.052
0.039
0.032
678D107M050CG3D 0.394 x 0.787 [10.0 x 20.0]
678D227M050DM3D 0.472 x 1.043 [12.5 x 26.5]
678D337M050EK3D 0.630 x 0.984 [16.0 x 25.0]
678D477M050DS3D 0.492 x 1.673 [12.5 x 42.5]
678D108M050FV3D 0.709 x 1.575 [18.0 x 40.0]
63 WVDC AT 105 °C, SURGE = 80 V
33.0
47.0
678D336M063CC3D 0.394 x 0.512 [10.0 x 13.0]
1.600
1.000
0.450
0.160
0.170
0.130
0.120
0.288
0.180
0.093
0.055
0.050
0.038
0.035
0.27
0.37
0.72
1.10
1.23
1.51
1.70
0.288
0.180
0.090
0.054
0.054
0.040
0.038
678D476M063CD3D 0.394 x 0.630 [10.0 x 16.0]
678D107M063DG3D 0.492 x 0.787 [12.5 x 20.0]
678D227M063DT3D 0.492 x 1.280 [12.5 x 33.5]
678D227M063EK3D 0.630 x 0.984 [16.0 x 25.0]
678D337M063DS3D 0.492 x 1.673 [12.5 x 42.5]
678D477M063ER3D 0.630 x 1.417 [16.0 x 36.0]
100.0
220.0
220.0
330.0
470.0
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
Revision: 18-Jul-16
Document Number: 42055
5
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
678D108M025DS3D-E3
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 25 V, 1000 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
678D108M050FV3DE3
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 50 V, 1000 uF, THROUGH HOLE MOUNT, CAN, RADIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明