730P185X9100 [VISHAY]
Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene; 薄膜电容器高频,总结和充填,金属化聚丙烯型号: | 730P185X9100 |
厂家: | VISHAY |
描述: | Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene |
文件: | 总4页 (文件大小:81K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Not for New Design
Type 730P
Vishay Sprague
Film Capacitors
High Frequency, Wrap-and-Fill, Metallized Polypropylene
FEATURES
• Excellent AC performance
• Low Power dissipation
• Low dielectric absorption
• Close tolerance
• High stability
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
Voltage derating:
At + 105 °C, 50 % of + 85 °C rating
ESR: 20 kHz to 100 kHz
DC Life Test: 150 % of rated voltage for 1000 hours
at + 85 °C. No open or short circuits. No visible damage.
Maximum Δ CAP 1.0 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.12 %
Capacitance Range: 0.022 µF to 10.0 µF
Capactiance Tolerance: 20 %, 10 %, 5 %
DC Voltage Rating: 100 WVDC to 630 WVDC
AC Voltage Rating: 70 Vrms to 275 Vrms, 60 Hz to 400 Hz
Humidity Test: 95 % relative humidity at + 40 °C for 250
hours. No visible damage.
Maximum Δ CAP 1.0 %
Minimum IR = 20 % of initial limit
Maximum DF = 0.12 %
Dissipation Factor: 0.1 % maximum
Measure all units at 1000 Hz at + 25 °C
AC Life Test: 110 % of rated rms voltage at 60 Hz for 1000
hours at + 85 °C.
DC Voltage Test: 200 % of rated voltage for 2 minutes
Maximum Δ CAP 5 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.12 %
AC Voltage Test: 130 % of rated rms voltage at 60 Hz for
15 seconds
Insulation Resistance: Measured at 100 WVDC after a
2 minute charge.
At + 25 °C: 200 000 Megohm - Microfarads
or 400 000 Megohm minimum.
At + 85 °C: 10 000 Megohm - Microfarads
or 20 000 Megohm minimum.
At + 105 °C: 1000 Megohm - Microfarads
or 2000 Megohm minimum.
PHYSICAL CHARACTERISTICS
Lead Pull: 5 pounds (2.3 kilograms) for one minute. No
physical damage.
Lead Bend: After three complete consecutive bends. No
damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DIMENSIONS in inches [millimeters]
1.750
[44.45]
Min.
1.750
[44.45]
Min.
L
D
Max.
0.062 [1.57]
Solid Tinned Wire
0.032 [0.81] Nominal Dia.
(No. 20 AWG)
* Leads to be within 0.062" [1.57 mm] of center line at egrees but not less than 0.031" [0.79 mm] from edge.
Document Number: 42029
Revision: 07-Feb-07
For technical questions, contact: spresale@vishay.com
www.vishay.com
25
Not for New Design
Type 730P
Film Capacitors
High Frequency, Wrap-and-Fill,
Metallized Polypropylene
Vishay Sprague
STANDARD RATINGS in inches [millimeters]
MAXIMUM RIPPLE CURRENT
(Amps rms) at 20 kHz
ESR
(Milliohms)
20 kHz -
100 Khz
Case Temperature*** at
CASE SIZE
D
CAPACITANCE
(µF)
PART NUMBER**
L
+ 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C
100 WVDC
-
0.22
0.27
0.33
0.39
0.47*
0.56
0.68
0.82
1.0*
1.2
730P224X9100
730P274X9100
730P334X9100
730P394X9100
730P474X9100
730P564X9100
730P684X9100
730P824X9100
730P105X9100 0.421 [10.7] 1.00 [25.4]
730P125X9100 0.454 [11.5] 1.00 [25.4]
730P155X9100 0.500 [12.7] 1.00 [25.4]
730P185X9100 0.541 [13.7] 1.00 [25.4]
730P205X9100 0.486 [12.3] 1.25 [31.8]
730P225X9100 0.507 [12.9] 1.25 [31.8]
730P275X9100 0.554 [14.1] 1.25 [31.8]
730P305X9100 0.581 [14.8] 1.25 [31.8]
730P335X9100 0.606 [15.4] 1.25 [31.8]
730P395X9100 0.654 [16.6] 1.25 [31.8]
730P405X9100 0.537 [13.6] 1.75 [44.5]
730P475X9100 0.577 [14.7] 1.75 [44.5]
730P505X9100 0.593 [15.1] 1.75 [44.5]
730P565X9100 0.624 [15.8] 1.75 [44.5]
730P605X9100 0.644 [16.4] 1.75 [44.5]
730P685X9100 0.682 [17.3] 1.75 [44.5]
730P805X9100 0.735 [18.7] 1.75 [44.5]
730P825X9100 0.743 [18.9] 1.75 [44.5]
730P106X9100 0.815 [20.7] 1.75 [44.5]
0.275 [7.0] 0.75 [19.0]
0.298 [7.6] 0.75 [19.0]
0.324 [8.2] 0.75 [19.0]
0.347 [8.8] 0.75 [19.0]
0.376 [9.6] 0.75 [19.0]
0.321 [8.2] 1.00 [25.4]
0.348 [8.8] 1.00 [25.4]
0.377 [9.6] 1.00 [25.4]
Not applicable. These capacitance values are not customarily
used in switched-mode power supplies.
-
-
-
-
-
-
-
-
-
-
37.0
35.0
33.0
31.0
26.0
24.0
20.0
19.0
18.0
18.0
17.0
16.0
16.0
15.0
15.0
15.0
14.0
14.0
14.0
13.0
13.0
13.0
12.0
250 WVDC
-
3.7
3.9
4.1
4.3
5.5
5.7
6.1
6.3
6.5
6.8
7.1
7.3
7.4
7.6
7.8
8.1
8.3
8.4
8.5
8.5
8.6
8.8
9.0
3.4
3.6
3.8
4.0
5.1
5.3
5.5
5.7
6.0
6.3
6.5
6.7
6.8
6.9
7.0
7.4
7.6
7.7
7.8
8.0
8.3
8.6
9.0
3.1
3.3
3.5
3.6
4.7
4.9
5.1
5.3
5.5
5.7
6.0
6.2
6.4
6.6
6.7
6.8
7.0
7.1
7.2
7.4
7.7
8.0
8.5
2.8
2.9
3.1
3.2
4.2
4.4
4.6
4.8
4.9
5.1
5.3
5.5
5.6
5.8
5.9
6.0
6.2
6.4
6.5
6.7
6.8
7.0
7.6
2.5
2.6
2.8
2.9
3.6
3.8
4.0
4.1
4.2
4.4
4.6
4.8
4.9
5.1
5.2
5.3
5.4
5.5
5.6
5.7
6.0
6.1
6.6
2.0
2.1
2.2
2.3
2.8
3.0
3.2
3.4
3.5
3.6
3.7
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.4
1.4
1.5
1.6
1.7
2.6
2.8
3.1
3.0
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.9
1.5
1.8
2.0
2.2
2.7
3.0
3.3
3.9
4.0
4.7
5.0
5.6
6.0
6.8
8.0
8.2
10.0
0.1*
0.12
0.15
0.18
0.22*
0.27
0.33*
0.39
0.47*
0.56
0.68
0.82
1.0*
1.2
730P104X9250
730P124X9250
730P154X9250
730P184X9250
730P224X9250
730P274X9250
730P334X9250
730P394X9250
0.279 [7.1] 0.75 [19.0]
0.300 [7.6] 0.75 [19.0]
0.327 [8.3] 0.75 [19.0]
0.353 [9.0] 0.75 [19.0]
0.306 [7.8] 1.00 [25.4]
0.333 [8.5] 1.00 [25.4]
0.362 [9.2] 1.00 [25.4]
0.389 [9.9] 1.00 [25.4]
-
-
Not applicable. These capacitance values are not customarily
used in switched-mode power supplies.
-
-
-
-
-
-
-
-
-
-
-
-
730P474X9250 0.422 [10.7] 1.00 [25.4]
730P564X9250 0.464 [11.8] 1.00 [25.4]
730P684X9250 0.425 [10.8] 1.25 [31.8]
730P824X9250 0.471 [12.0] 1.25 [31.8]
730P105X9250 0.513 [13.0] 1.25 [31.8]
730P125X9250 0.554 [14.1] 1.25 [31.8]
730P155X9250 0.613 [15.6] 1.25 [31.8]
730P185X9250 0.667 [17.0] 1.25 [31.8]
730P205X9250 0.700 [17.8] 1.25 [31.8]
730P225X9250 0.610 [15.5] 1.75 [44.5]
730P275X9250 0.669 [17.0] 1.75 [44.5]
730P305X9250 0.703 [17.9] 1.75 [44.5]
730P335X9250 0.734 [18.6] 1.75 [44.5]
730P395X9250 0.794 [20.2] 1.75 [44.5]
730P405X9250 0.803 [20.4] 1.75 [44.5]
730P475X9250 0.866 [22.0] 1.75 [44.5]
730P505X9250 0.892 [22.7] 1.75 [44.5]
730P565X9250 0.941 [23.9] 1.75 [44.5]
730P605X9250 0.972 [24.7] 1.75 [44.5]
730P685X9250 0.882 [22.4] 2.25 [57.2]
730P805X9250 0.953 [24.2] 2.25 [57.2]
730P825X9250 0.964 [24.5] 2.25 [57.2]
730P106X9250 1.060 [26.9] 2.25 [57.2]
35.0
33.0
32.0
31.0
28.0
27.0
26.0
25.0
21.0
20.0
19.0
18.0
18.0
17.0
16.0
16.0
15.0
15.0
15.0
15.0
14.0
14.0
13.0
3.8
3.9
4.0
4.2
4.4
4.7
5.1
5.9
7.2
8.4
8.6
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
3.7
3.8
3.9
4.1
4.4
4.6
5.0
5.8
7.2
7.5
7.8
8.3
8.4
8.5
8.6
8.8
9.0
9.0
9.0
9.0
9.0
9.0
9.0
3.6
3.7
3.8
4.0
4.4
4.5
4.9
5.7
6.8
7.0
7.3
7.6
7.8
8.0
8.2
8.5
8.8
8.9
9.0
9.0
9.0
9.0
9.0
3.4
3.5
3.7
3.9
4.4
5.0
5.4
5.7
6.0
6.3
6.6
6.8
7.0
7.2
7.4
7.7
7.9
8.0
8.2
8.4
8.7
8.8
8.9
2.9
3.1
3.2
3.4
4.3
4.5
4.7
5.0
5.2
5.4
5.7
5.9
6.0
6.2
6.3
6.6
6.8
7.0
7.2
7.4
7.8
7.9
8.3
2.4
2.5
2.6
2.8
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.8
4.9
5.0
5.1
5.3
5.6
5.8
5.9
6.0
6.3
6.4
6.8
1.7
1.8
1.9
2.0
3.2
3.3
3.5
3.7
3.9
4.1
4.3
4.4
4.5
4.6
4.7
4.9
5.1
5.3
5.5
5.6
5.8
5.9
6.2
1.5
1.8
2.0*
2.2
2.7
3.0
3.3
3.9
4.0
4.7
5.0
5.6
6.0
6.8
8.0
8.2
10.0
*
These ratings are stocked.
** Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the “X9” in the Part Number to “X0”;
for 5 %, from “X9” to “X5”.
*** The peak current pulse capability ot these capacitors is 10 amperes/µF. The maximum rate voltage change is 10 V/µS.
www.vishay.com
26
For technical questions, contact: spresale@vishay.com
Document Number: 42029
Revision: 07-Feb-07
Not for New Design
Type 730P
Film Capacitors
High Frequency, Wrap-and-Fill,
Metallized Polypropylene
Vishay Sprague
STANDARD RATINGS in inches [millimeters]
MAXIMUM RIPPLE CURRENT
ESR
(Amps rms) at 20 kHz
Case Temperature*** at
(Milliohms)
20 kHz -
100 Khz
CAPACITANCE
(µF)
PART
NUMBER**
CASE SIZE
D
L
+ 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C
400 WVDC
0.047
0.056
0.068
0.082
0.1*
0.12
0.15*
0.18
0.22
0.27
0.33
0.39
0.47*
0.56
0.68
0.82
1.0*
1.2
1.5
1.8
2.0*
2.2
2.7
3.0*
3.3
3.9
730P473X9400
730P563X9400
730P683X9400
730P823X9400
730P104X9400
730P124X9400
730P154X9400
730P184X9400
730P224X9400
730P274X9400 0.421 [10.7] 1.00 [25.4]
730P334X9400 0.469 [11.9] 1.00 [25.4]
730P394X9400 0.503 [12.8] 1.00 [25.4]
730P474X9400 0.545 [13.8] 1.00 [25.4]
730P564X9400 0.506 [12.9] 1.25 [31.8]
730P684X9400 0.551 [14.0] 1.25 [31.8]
730P824X9400 0.599 [15.2] 1.25 [31.8]
730P105X9400 0.655 [16.6] 1.25 [31.8]
730P125X9400 0.712 [18.1] 1.25 [31.8]
730P155X9400 0.658 [16.7] 1.75 [44.5]
730P185X9400 0.716 [18.2] 1.75 [44.5]
730P205X9400 0.752 [19.1] 1.75 [44.5]
730P225X9400 0.786 [20.0] 1.75 [44.5]
730P275X9400 0.865 [22.0] 1.75 [44.5]
730P305X9400 0.909 [23.1] 1.75 [44.5]
730P335X9400 0.951 [24.2] 1.75 [44.5]
730P395X9400 1.031 [26.2] 1.75 [44.5]
0.258 [6.6] 0.75 [19.0]
0.275 [7.0] 0.75 [19.0]
0.297 [7.5] 0.75 [19.0]
0.320 [8.1] 0.75 [19.0]
0.348 [8.8] 0.75 [19.0]
0.299 [7.6] 1.00 [25.4]
0.328 [8.3] 1.00 [25.4]
0.353 [9.0] 1.00 [25.4]
0.385 [9.8] 1.00 [25.4]
-
-
-
-
-
-
-
-
-
-
-
-
Not applicable. These capacitance values are not customarily
used in switched-mode power supplies.
-
-
-
-
-
-
-
32.0
31.0
30.0
28.0
27.0
26.0
25.0
23.0
21.0
20.0
19.0
17.0
16.0
15.0
5.7
5.7
5.7
5.7
5.7
6.3
7.0
8.0
9.0
9.0
9.0
9.0
9.0
9.0
5.5
5.7
5.7
5.7
5.7
6.2
6.9
7.9
9.0
9.0
9.0
9.0
9.0
9.0
5.0
5.3
5.5
5.6
5.7
6.0
6.7
7.8
9.0
9.0
9.0
9.0
9.0
9.0
4.4
4.4
4.8
5.3
5.7
5.9
6.6
7.7
8.0
8.3
8.6
9.0
9.0
9.0
3.8
4.1
4.3
4.5
5.7
5.8
6.5
6.8
7.0
7.4
7.6
7.9
8.1
8.3
3.2
3.3
3.5
3.7
4.7
4.9
5.2
5.5
5.7
5.9
6.0
6.4
6.6
6.8
2.2
2.3
2.4
2.6
4.3
4.5
4.7
5.0
5.2
5.4
5.6
5.9
6.3
6.5
630 WVDC
0.022*
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0*
730P223X9630
730P273X9630
730P333X9630
730P393X9630
730P473X9630
730P563X9630 0.418 [10.6] 0.75 [19.0]
730P683X9630
730P823X9630
730P104X9630 0.408 [10.4] 1.00 [25.4]
730P124X9630 0.443 [11.3] 1.00 [25.4]
730P154X9630 0.496 [12.6] 1.00 [25.4]
730P184X9630 0.538 [13.7] 1.00 [25.4]
730P224X9630 0.496 [12.6] 1.25 [31.8]
730P274X9630 0.542 [13.8] 1.25 [31.8]
730P334X9630 0.593 [15.1] 1.25 [31.8]
730P394X9630 0.639 [16.2] 1.25 [31.8]
730P474X9630 0.696 [17.7] 1.25 [31.8]
730P564X9630 0.608 [15.4] 1.75 [44.5]
730P684X9630 0.664 [16.9] 1.75 [44.5]
730P824X9630 0.724 [18.4] 1.75 [44.5]
730P105X9630 0.794 [20.2] 1.75 [44.5]
0.283 [7.2] 0.75 [19.0]
0.307 [7.8] 0.75 [19.0]
0.334 [8.5] 0.75 [19.0]
0.358 [9.1] 0.75 [19.0]
0.388 [9.9] 0.75 [19.0]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.346 [8.8] 1.00 [25.4]
0.374 [9.5] 1.00 [25.4]
Not applicable. These capacitance values are not customarily
used in switched-mode power supplies.
-
-
-
-
-
-
-
28.0
26.0
25.0
22.0
18.0
6.8
7.4
7.8
8.1
8.6
6.3
6.9
7.2
7.5
7.9
5.8
6.3
6.6
6.9
7.3
5.2
5.6
5.9
6.2
6.5
4.5
4.8
5.1
5.3
5.6
3.6
4.0
4.2
4.3
4.6
2.6
2.8
2.9
3.1
3.6
*
These ratings are stocked.
** Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the “X9” in the Part Number to “X0”;
for 5 %, from “X9” to “X5”.
*** The peak current pulse capability ot these capacitors is 10 amperes/µF. The maximum rate voltage change is 10 V/µS.
ORDERING INFORMATION
730P
224
X9
100
TYPE
CAPACITANCE
CAPACITANCE TOLERANCE
DC VOLTAGE RATING*
This is expressed in picofarads. The first two
digits are the significant figures. The third is
the number of zeros to follow.
X0 = 20 %
X9 = 10 %
X5 = 5 %
This is expressed in volts.
* At + 85 °C, AC rms ratings for frequencies up to and including 400 Hz correspond to this table:
WVDC
RATED rms VOLTS
100
70
250
175
400
275
630
275
Document Number: 42029
Revision: 07-Feb-07
For technical questions, contact: spresale@vishay.com
www.vishay.com
27
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明