93026-31KSE3 [VISHAY]
Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 10% +Tol, 10% -Tol, 1200uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT;
| 型号： | 93026-31KSE3 |
| 厂家： | 
VISHAY |
| 描述： | Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 10% +Tol, 10% -Tol, 1200uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT 电容器 |
| 文件： | 总4页 (文件大小：82K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ST
Vishay
SuperTan® Wet Tantalum Capacitors
with Hermetic Seal
FEATURES
• Terminations: Standard Tin/lead (Sn/Pb)
100 % Tin (RoHS compliant)
availableTerminations:
Pb-free
Available
• Very High Capacitance
• 10 to 1800 µF
RoHS*
COMPLIANT
• 25 to 125 VDC
• - 55 °C to + 125 °C
• Very Low ESR
• High Ripple Current
• All Tantalum Case
• Hermetically Sealed
• Low DCL
Application Notes
a) No continuous reverse voltage permissible.
b)Transient reverse voltage surges are acceptable under
the following conditions:
Vishay ST represents a major breakthrough in wet tantalum
capacitor technology. Its unique cathode system provides
the highest capacitance per unit volume. The design
facilitates a doubling of capacitance, lower ESR and higher
ripple current rating compared with conventional wet
tantalum products. Moreover, the ST has the capacitance
stability of a solid tantalum capacitor and there are no circuit
impedance restrictions.
The peak reverse voltage does not exceed 1.5 V and the
peak current times the duration of the reverse transient
does not exceed 0.05 ampere seconds. In addition, the
repetition frequency of the reverse voltage surge is less
than 10 Hz.
c) The peak of the applied AC ripple and the applied DC
voltage must not exceed the DC voltage rating of the
capacitor.
d) Ripple current ratings by part number at 85 °C and 40 kHz
are included in the table. Ripple current correction factors
for other temperatures and frequencies are given on the
next page.
The ST is housed in an all tantalum, hermetically sealed case
and is manufactured to withstand hazardous environments.
The ST is used widely in the defense and aerospace
industries and whenever there is a space problem
DIMENSIONS in inches [millimeters]
TERMINAL WELDED
ꢀ.ꢀꢄ5 + ꢀ.ꢀꢀꢄ
ꢁꢀ.1ꢂ + ꢀ.ꢀ5ꢃ
ꢀ.ꢄ5ꢀ ꢁ1.35ꢃ
MAX.
TO CASE
ꢀ.ꢀ9ꢂ ꢁꢄ.38ꢃ
MAX.
E
E
L
"D" DIA.
TERMINAL LOCATION
WITHIN ꢀ.ꢀ30 OF CENTER
CASE CODE
D MAX. INSULATED
D
ꢀ.ꢀ01 ꢁꢀ.ꢂ0ꢃ
0.188 (4.78)
0.281 (7.14)
0.281 (7.14)
0.375 (9.52)
0.375 (9.52)
L + ꢀ.ꢀ30 ꢁꢀ.79ꢃ UNINSULATED
0.453 (11.51)
E
ꢀ.ꢄ5ꢀ ꢁ1.35ꢃ MAX.
1.500 (38.10)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
T1
T2
L2
T3
T4
0.219 (5.56)
0.312 (7.92)
0.312 (7.92)
0.406 (10.31)
0.406 (10.31)
0.641 (16.28)
1.008 (25.60)
0.766 (19.46)
1.062 (26.97)
NOTES:
Approx. Weight
1. Material at egress is tantalum
T1: 2.3 grams, T2: 5.7 grams
T3: 9.4 grams, T4: 14.8 grams
2. Insulation sleeving will lap over the ends of the capacitor case.
ORDERING INFORMATION
ST
ꢄꢄꢀ
CAPACITANCE 85 °C RATED DC
µF VOLTAGE
0ꢀꢀ
Tꢂ
M
I
E3
SUPERTAN
COMMERCIAL
CAP.TYPE*
CASE CODE CAPACITANCE
INSULATING
SLEEVE
RoHS COMPLIANT
E3 = 100 % tin termination
(RoHS compliant)
Blank = SnPb termination
(standard design)
TOLERANCE
M = 20 %
M = 10 %
I = Insulated
X = Uninsulated
NOTES:
1. See DSCC drawing 93026 for MIL version of SuperTan.
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
1
For technical questions, contact: wettants@vishay.com
Document Number: 43000
Revision: 29-MAR-07
ST
SuperTan® Wet Tantalum Capacitors
with Hermetic Seal
Vishay
RATINGS AND CASE CODES
CAP. AT
ꢄ5 °C
&
0ꢄꢀ Hz
ꢁµFꢃ
CASE
CODE
MAX.
ESR
Ω
MAX. DCL µA
MAX. IMP.
AT
- 55 °C
& 0ꢄꢀ Hz
Ω
MAXIMUM CAPACITANCE
CHANGE %
AC RIPPLE
85 °C
PART NUMBER
ꢂꢀ kHz
mA
ꢄ5 °C
85 °C
& 0ꢄ5 °C
- 55 °C
85 °C
0ꢄ5 °C
0ꢄꢀ Hz
rms
ꢄ5 VDC at 85 °C
05 VDC at 0ꢄ5 °C
120
560
1100
1200
1800
T1
T2
L2
T3
T4
1.3
0.83
0.5
0.65
0.5
1
2
3
5
6
5
25
12
7
7
7
- 42
- 65
- 60
- 70
- 72
+ 8
+ 12
+ 15
+ 30
+ 18
+ 20
1250
2100
2500
2600
3100
ST120-25T1MI
ST560-25T2MI
ST1100-25L2MI
ST1200-25T3MI
ST1800-25T4MI
10
25
20
25
+ 10
+ 15
+ 12
+ 12
3ꢀ VDC at 85 °C
ꢄꢀ VDC at 0ꢄ5 °C
100
470
950
1000
1500
T1
T2
L2
T3
T4
1.3
0.85
0.5
0.7
0.6
1
2
5
7
5
25
15
7
7
6
- 38
- 65
- 45
- 70
- 72
+ 8
+ 12
+ 18
+ 30
+ 18
+ 20
1200
1800
2200
2500
3000
ST100-30TMI
ST470-30T2MI
ST950-30L2MI
ST1000-30T3MI
ST1500-30T4MI
10
30
25
35
+ 10
+ 15
+ 10
+ 10
12
5ꢀ VDC at 85 °C
3ꢀ VDC at 0ꢄ5 °C
68
T1
T2
L2
T3
T4
1.5
0.9
0.6
0.75
0.7
1
2
3
3
5
5
35
17.5
7
10
8
- 25
- 50
- 45
- 45
- 58
+ 8
+ 8
+ 10
+ 8
+ 15
+ 15
+ 15
+ 15
+ 20
1050
1800
2200
2100
2750
ST68-50T1MI
ST220-50T2MI
ST450-50L2MI
ST470-50T3MI
ST680-50T4MI
220
450
470
680
10
25
25
40
+ 10
1ꢀ VDC at 85 °C
ꢂꢀ VDC at 0ꢄ5 °C
47
T1
T2
L2
T3
T4
2.0
1.1
0.6
0.9
0.8
1
2
3
3
5
5
44
20
9
15
10
- 25
- 40
- 30
- 45
- 58
+ 8
+ 8
+ 10
+ 8
+ 12
+ 15
+ 35
+ 15
+ 15
1050
1800
2200
2100
2750
ST47-60T1MI
ST150-60T2MI
ST370-60L2MI
ST390-60T3MI
ST560-60T4MI
150
370
390
560
10
25
25
40
+ 8
75 VDC at 85 °C
5ꢀ VDC at 0ꢄ5 °C
33
T1
T2
L2
T3
T4
2.5
1.3
0.8
1.0
0.9
1
2
5
3
5
5
66
24
10
12
12
- 25
- 35
- 20
- 45
- 50
+ 5
+ 6
+ 5
+ 6
+ 6
+ 9
1050
1650
2000
2100
2750
ST33-75T1MI
ST110-75T2MI
ST250-75L2MI
ST330-75T3MI
ST470-75T4MI
110
250
330
470
10
30
30
50
+ 10
+ 15
+ 10
+ 10
0ꢀꢀ VDC at 85 °C
15 VDC at 0ꢄ5 °C
15
68
120
150
220
T1
T2
L2
T3
T4
3.5
2.1
1.0
1.6
1.2
1
2
3
3
5
5
125
37
18
22
- 18
- 30
- 20
- 35
- 40
+ 3
+ 4
+ 5
+ 6
+ 6
+ 10
+ 12
+ 15
+ 12
+ 12
1050
1650
1800
2100
2750
ST15-100T1MI
ST68-100T2MI
ST120-100L2MI
ST150-100T3MI
ST220-100T4MI
10
25
25
50
15
0ꢄ5 VDC at 85 °C
85 VDC at 0ꢄ5 °C
10
47
90
100
150
T1
T2
L2
T3
T4
5.5
2.3
1.3
1.8
1.6
1
2
5
3
5
5
175
47
24
35
- 15
- 25
- 15
- 35
- 35
+ 3
+ 5
+ 5
+ 5
+ 6
+ 10
+ 12
+ 10
+ 12
+ 12
1050
1650
1800
2100
2750
ST10-125T1MI
ST47-125T2MI
ST90-125L2MI
ST100-125T3MI
ST150-125T4MI
10
15
25
50
20
(K = 10 %, M = 20 %) and insulation letter (I = Insulation, X = Uninsulated)
• Part Numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. For 10 units,changethe digit following the
letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the Part Number.
• For RoHS compliant add “E3” suffix.
RIPPLE CURRENT MULTIPLIERS VERSUS FREQUENCY, TEMPERATURE AND APPLIES PEAK VOLTAGE
FREQUENCY OF
APPLIED
0ꢄꢀ Hz
8ꢀꢀ Hz
0 kHz
0ꢀ kHz
ꢂꢀ kHz
0ꢀꢀ kHz
RIPPLE
CURRENT
AMBIENT STILL
AIR TEMP. IN °C
≤ 55 85 0ꢀ5 0ꢄ5 ≤ 55 85 0ꢀ5 0ꢄ5 ≤ 55 85 0ꢀ5 0ꢄ5 ≤ 55 85 0ꢀ5 0ꢄ5 ≤ 55 85 0ꢀ5 0ꢄ5 ≤ 55 85 0ꢀ5 0ꢄ5
% of
85 °C
rated
100 % 0.60 0.39
90 % 0.60 0.46
80 % 0.60 0.52 0.35
70 % 0.60 0.58 0.44
-
-
-
-
-
-
0.71 0.43
0.71 0.55
0.71 0.62 0.42
0.71 0.69 0.52
-
-
-
-
-
-
0.72 0.46
0.72 0.55
0.72 0.62 0.42
0.72 0.70 0.52
-
-
-
-
-
-
0.88 0.55
0.88 0.67
0.88 0.76 0.52
0.88 0.85 0.64
-
-
-
-
-
-
1.0 0.63
1.0 0.77
1.0 0.87 0.59
1.0 0.97 0.73
-
-
-
-
-
-
1.1 0.69
1.1 0.85
1.1 0.96 0.65
1.1 1.07 0.80
-
-
-
-
-
-
peak
66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50
voltage
Document Number: 43000
Revision: 29-MAR-07
For technical questions, contact: wettants@vishay.com
www.vishay.com
2
ST
SuperTan® Wet Tantalum Capacitors
with Hermetic Seal
Vishay
93026 RATINGS AND CASE CODES
DSCC
DRAWING
93ꢀꢄ1
CAP. AT CASE MAX. ESR
MAX. DCL
µA
MAX.
IMP. AT
- 55 °C &
0ꢄꢀ Hz
Ω
MAX. CAPACITANCE
CHANGE %
AC RIPPLE
85 °C
ꢄ5 °C
&
CODE
Ω
0ꢄꢀ Hz
ꢂꢀ kHz
mA
ꢄ5 °C
85 °C
& 0ꢄ5 °C
- 55 °C
85 °C
0ꢄ5 °C
0ꢄꢀ Hz
ꢁµFꢃ
rms
ꢄ5 VDC at 85 °C
05 VDC at 0ꢄ5 °C
93026-29
93026-30
93026-57
93026-31
93026-32
120
560
1100
1200
1800
T1
T2
L2
T3
T4
1.3
0.83
0.5
0.65
0.5
1
2
3
5
6
5
25
12
7
7
7
- 42
- 65
- 60
- 70
- 75
+ 8
+ 12
1250
2100
2500
2600
3100
10
25
20
25
+ 10
+ 15
+ 12
+ 12
+ 15
+ 30
+ 18
+ 20
3ꢀ VDC at 85 °C
ꢄꢀ VDC at 0ꢄ5 °C
93026-33
93026-34
93026-58
93026-35
93026-36
100
470
950
1000
1500
T1
T2
L2
T3
T4
1.3
0.85
0.5
0.7
0.6
1
2
5
7
12
5
25
15
7
7
6
- 38
- 65
- 45
- 70
- 72
+ 8
+ 12
1200
1800
2200
2500
3000
10
30
25
35
+ 10
+ 15
+ 10
+ 10
+ 18
+ 30
+ 18
+ 20
5ꢀ VDC at 85 °C
3ꢀ VDC at 0ꢄ5 °C
93026-37
93026-38
93026-59
93026-39
93026-40
68
T1
T2
L2
T3
T4
1.5
0.9
0.6
0.75
0.7
1
2
3
3
5
5
35
17.5
7
10
8
- 25
- 50
- 25
- 50
- 58
+ 8
+ 8
+ 10
+ 8
+ 15
1050
1800
2200
2100
2750
220
450
470
680
10
25
25
40
+ 15
+ 30
+ 15
+ 20
+ 10
1ꢀ VDC at 85 °C
ꢂꢀ VDC at 0ꢄ5 °C
93026-41
93026-42
93026-60
93026-43
93026-44
47
T1
T2
L2
T3
T4
2.0
1.1
0.6
0.9
0.8
1
2
3
3
5
5
44
20
9
15
10
- 25
- 40
- 30
- 60
- 58
+ 8
+ 8
+ 10
+ 8
+ 12
1050
1650
2000
2100
2750
150
370
390
560
10
25
25
40
+ 15
+ 25
+ 15
+ 15
+ 8
75 VDC at 85 °C
5ꢀ VDC at 0ꢄ5 °C
93026-45
93026-46
93026-61
93026-47
93026-48
33
T1
T2
L2
T3
T4
2.5
1.3
0.8
1.0
0.9
1
2
5
3
5
5
66
24
10
12
12
- 25
- 35
- 20
- 45
- 55
+ 5
+ 6
+ 5
+ 6
+ 6
+ 9
1050
1650
2000
2100
2750
110
250
330
470
10
30
30
50
+ 10
+ 15
+ 10
+ 10
0ꢀꢀ VDC at 85 °C
15 VDC at 0ꢄ5 °C
93026-49
93026-50
93026-62
93026-51
93026-52
15
68
120
150
220
T1
T2
L2
T3
T4
3.5
2.1
1.0
1.6
1.2
1
2
3
3
5
5
125
37
18
22
15
- 18
- 30
- 20
- 35
- 40
+ 3
+ 4
+ 5
+ 6
+ 6
+ 10
1050
1650
1800
2100
2750
10
25
25
50
+ 12
+ 15
+ 12
+ 12
0ꢄ5 VDC at 85 °C
85 VDC at 0ꢄ5 °C
93026-53
93026-54
93026-63
93026-55
93026-56
10
47
90
100
150
T1
T2
L2
T3
T4
5.5
2.3
1.3
1.8
1.6
1
2
5
3
5
5
175
47
24
35
20
- 15
- 25
- 15
- 35
- 35
+ 3
+ 5
+ 5
+ 5
+ 6
+ 10
1050
1650
1800
2100
2750
10
15
25
50
+ 12
+ 10
+ 12
+ 12
ORDERING INFORMATION - DSCC PART NUMBER
93ꢀꢄ1
-ꢄ9
K
S
DSCC
DRAWING NUMBER
DASH
NUMBER
CAPACITANCE
TOLERANCE
S = Sleeved
U = Unsleeved
K = 10 %
M = 20 %
DEFENSE SUPPLY CENTER, COLUMBUS
COLUMBUS, OHIO
DRAWING NO.
93ꢀꢄ1
www.vishay.com
3
For technical questions, contact: wettants@vishay.com
Document Number: 43000
Revision: 29-MAR-07
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号：
93026-32KS
Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 10% +Tol, 10% -Tol, 1800uF, Through Hole Mount, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明