93026-34(1)(2) [VISHAY]
DSCC 93026 SuperTan Wet Tantalum Capacitors; DSCC 93026 SuperTan液体钽电容器型号: | 93026-34(1)(2) |
厂家: | VISHAY |
描述: | DSCC 93026 SuperTan Wet Tantalum Capacitors |
文件: | 总4页 (文件大小:72K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DSCC 93026
www.vishay.com
Vishay
DSCC 93026 SuperTan® Wet Tantalum Capacitors
FEATURES
• Terminations: Standard tin/lead (Sn/Pb)
• Very high capacitance
• 10 μF to 1800 μF
• 25 VDC to 125 VDC
• - 55 °C to + 125 °C
• Very low ESR
• High ripple current
• All tantalum case
• Hermetically sealed
• Low DCL
• Mounting: Axial
Vishay’s DSCC 93026 capacitor represents a major
breakthrough in wet tantalum technology. Its unique
cathode system provides the highest capacitance per unit
volume. The design facilitates a doubling of capacitance,
lower ESR and higher ripple current rating compared
with conventional wet tantalum products. Moreover, the
DSCC 93026 has the capacitance stability of a solid
tantalum capacitor and there are no circuit impedance
restrictions.
APPLICATION NOTES
a) No continuous reverse voltage permissible.
b) The peak of the applied AC ripple and the applied DC
voltage must not exceed the DC voltage rating of the
capacitor.
c) Ripple current ratings by part number at 85 °C and 40 kHz
are included in the table. Ripple current correction factors
for other temperatures and frequencies are given on the
next page.
The DSCC 93026 is housed in an all tantalum, hermetically
sealed case and is manufactured to withstand hazardous
environments. The DSCC 93026 is used widely in the
defense and aerospace industries and whenever there is a
space problem.
d) Transient reverse voltage surges are acceptable under
the following conditions:
The peak reverse voltage does not exceed 1.5 V and the
peak current times the duration of the reverse transient
does not exceed 0.05 As. In addition, the repetition
frequency of the reverse voltage surge is less than 10 Hz.
DIMENSIONS in inches [millimeters]
Terminal welded
0.025 + 0.002
(0.64 + 0.05)
to case
0.250 (6.35)
MAX.
0.094 (2.38)
MAX.
Terminal location
within 0.031 of center
“D” dia.
E
L1
E
MAXꢀ INSULATED
(DIAꢀ)
CASE CODE
D
0ꢀ016 [0ꢀ41]
L1 + 0ꢀ031 [0ꢀ79] UNINSULATED
E
0ꢀ250 [6ꢀ35] MAXꢀ
T1
T2
L2
T3
T4
0.188 [4.78]
0.281 [7.14]
0.281 [7.14]
0.375 [9.52]
0.375 [9.52]
0.219 [5.56]
0.312 [7.92]
0.312 [7.92]
0.406 [10.31]
0.406 [10.31]
0.453 [11.51]
0.641 [16.28]
1.008 [25.60]
0.766 [19.46]
1.062 [26.97]
1.500 [38.10]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
Notes
•
•
•
Material at egress is tantalum
Insulation sleeving will lap over the ends of the capacitor case
Tinned nickel leads, solderable and weldable
•
Approx. weight
T1: 2.3 g, T2: 5.7 g
T3: 9.4 g, T4: 14.8 g
Revision: 01-Feb-12
Document Number: 40136
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 93026
www.vishay.com
Vishay
ORDERING INFORMATION
93026
-29
K
S
DSCC DRAWING NUMBER
DASH NUMBER
CAPACITANCE TOLERANCE
K = 10 ꢀ
M = 20 ꢀ
S = Sleeved
U = Unsleeved
DEFENSE SUPPLY CENTER, COLUMBUS
COLUMBUS, OHIO
DRAWING NO.
93026
STANDARD RATINGS
MAXꢀ DCL
(μA)
MAXꢀ
IMPꢀ AT
- 55 °C
120 Hz
()
MAXꢀ CAPACITANCE CHANGE AC RIPPLE
CAPACITANCE
AT 25 °C
120 Hz
MAXꢀ ESR
120 Hz
()
(%)
85 °C
40 kHz
(mA)
CASE
CODE
PART NUMBER
85 °C/
125 °C
25 °C
- 55 °C
85 °C
125 °C
(μF)
RMS
25 VDC AT 85 °C; 15 VDC AT 125 °C
120
560
T1
T2
L2
T3
T4
1.3
0.83
0.5
1
2
3
5
6
5
25
12
7
- 42
- 65
- 60
- 70
- 75
+ 8
+ 12
+ 15
+ 45
+ 18
+ 20
1250
2100
3200
2600
3100
93026-29(1)(2)
93026-30(1)(2)
93026-57(1)(2)
93026-31(1)(2)
93026-32(1)(2)
10
25
20
25
+ 10
+ 20
+ 12
+ 12
1100
1200
1800
0.65
0.5
7
7
30 VDC AT 85 °C; 20 VDC AT 125 °C
100
470
T1
T2
L2
T3
T4
1.3
0.85
0.5
1
2
5
25
15
7
- 38
- 65
- 55
- 70
- 72
+ 8
+ 12
+ 18
+ 35
+ 18
+ 20
1200
1800
3200
2500
3000
93026-33(1)(2)
93026-34(1)(2)
93026-58(1)(2)
93026-35(1)(2)
93026-36(1)(2)
10
30
25
35
+ 10
+ 18
+ 10
+ 10
950
5
1000
1500
0.7
7
7
0.6
12
6
50 VDC AT 85 °C; 30 VDC AT 125 °C
68
T1
T2
L2
T3
T4
1.5
0.9
1
2
3
3
5
5
35
17.5
7.5
10
- 25
- 50
- 45
- 50
- 58
+ 8
+ 8
+ 15
+ 15
+ 30
+ 15
+ 20
1050
1800
2900
2100
2750
93026-37(1)(2)
93026-38(1)(2)
93026-59(1)(2)
93026-39(1)(2)
93026-40(1)(2)
220
450
470
680
10
25
25
40
0.6
+ 12
+ 8
0.75
0.7
8
+ 10
60 VDC AT 85 °C; 40 VDC AT 125 °C
47
T1
T2
L2
T3
T4
2.0
1.1
0.6
0.9
0.8
1
2
3
3
5
5
44
20
9
- 25
- 40
- 33
- 60
- 58
+ 8
+ 8
+ 9
+ 8
+ 8
+ 12
+ 15
+ 20
+ 15
+ 15
1050
1650
2900
2100
2750
93026-41(1)(2)
93026-42(1)(2)
93026-60(1)(2)
93026-43(1)(2)
93026-44(1)(2)
150
370
390
560
10
25
25
40
15
10
75 VDC AT 85 °C; 50 VDC AT 125 °C
33
T1
T2
L2
T3
T4
2.5
1.3
0.8
1.0
0.9
1
2
5
3
5
5
66
24
12
12
12
- 25
- 35
- 30
- 45
- 55
+ 5
+ 6
+ 6
+ 6
+ 6
+ 9
1050
1650
2500
2100
2750
93026-45(1)(2)
93026-46(1)(2)
93026-61(1)(2)
93026-47(1)(2)
93026-48(1)(2)
110
250
330
470
10
30
30
50
+ 10
+ 15
+ 10
+ 10
Note
Part number definitions:
(1) Capacitance tolerance. K = 10 ꢀ, M = 20 ꢀ
(2) Case or body insulation. S = Sleeved, U = Unsleeved
•
Revision: 01-Feb-12
Document Number: 40136
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 93026
www.vishay.com
Vishay
STANDARD RATINGS
MAXꢀ DCL
(μA)
MAXꢀ
IMPꢀ AT
- 55 °C
120 Hz
()
MAXꢀ CAPACITANCE CHANGE AC RIPPLE
CAPACITANCE
AT 25 °C
120 Hz
MAXꢀ ESR
120 Hz
()
(%)
85 °C
CASE
CODE
40 kHz
(mA)
PART NUMBER
85 °C/
125 °C
25 °C
- 55 °C
85 °C
125 °C
(μF)
RMS
100 VDC AT 85 °C; 65 VDC AT 125 °C
15
68
T1
T2
L2
T3
T4
3.5
2.1
1.0
1.6
1.2
1
2
3
3
5
5
125
37
- 18
- 30
- 30
- 35
- 40
+ 3
+ 4
+ 4
+ 6
+ 6
+ 10
+ 12
+ 12
+ 12
+ 12
1050
1650
2200
2100
2750
93026-49(1)(2)
93026-50(1)(2)
93026-62(1)(2)
93026-51(1)(2)
93026-52(1)(2)
10
25
25
50
120
150
220
20.5
22
15
125 VDC AT 85 °C; 85 VDC AT 125 °C
10
47
T1
T2
L2
T3
T3
T4
5.5
2.3
1.3
1.8
1.8
1.6
1
2
5
3
3
5
5
175
47
25
40
35
20
- 15
- 25
- 22
- 35
- 35
- 35
+ 3
+ 5
+ 4
+ 5
+ 5
+ 6
+ 10
+ 12
+ 15
+ 12
+ 12
+ 12
1050
1650
2000
1950
2100
2750
93026-53(1)(2)
93026-54(1)(2)
93026-63(1)(2)
n/a
10
25
25
25
50
90
82
100
150
93026-55(1)(2)
93026-56(1)(2)
Note
Part number definitions:
(1) Capacitance tolerance. K = 10 ꢀ, M = 20 ꢀ
(2) Case or body insulation. S = Sleeved, U = Unsleeved
•
RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIES PEAK VOLTAGE
FREQUENCY OF
APPLIED RIPPLE
CURRENT
120 Hz
800 Hz
1 kHz
10 kHz
40 kHz
100 kHz
AMBIENT STILL
AIR TEMPꢀ IN °C
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
55 85 105 125
100 ꢀ 0.60 0.39
90 ꢀ 0.60 0.46
-
-
-
-
-
-
0.71 0.43
0.71 0.55
-
-
-
-
-
-
0.72 0.46
0.72 0.55
-
-
-
-
-
-
0.88 0.55
0.88 0.67
-
-
-
-
-
-
1.0 0.63
1.0 0.77
-
-
-
-
-
-
1.1 0.69
1.1 0.85
-
-
-
-
-
-
% of
85 °C
rated
peak
80 ꢀ 0.60 0.52 0.35
70 ꢀ 0.60 0.58 0.44
0.71 0.62 0.42
0.71 0.69 0.52
0.72 0.62 0.42
0.72 0.70 0.52
0.88 0.76 0.52
0.88 0.85 0.64
1.0 0.87 0.59
1.0 0.97 0.73
1.1 0.96 0.65
1.1 1.07 0.80
voltage
66 2/3 ꢀ 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50
Revision: 01-Feb-12
Document Number: 40136
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明