ACAC0612110R3220RPW [VISHAY]
Professional Thin Film Chip Resistor Array; 专业的薄膜芯片电阻阵列
| 型号： | ACAC0612110R3220RPW |
| 厂家： | 
VISHAY |
| 描述： | Professional Thin Film Chip Resistor Array |
| 文件： | 总6页 (文件大小：162K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ACAC 0612, ACAS 0612 - Professional
Vishay Beyschlag
Professional Thin Film Chip Resistor Array
FEATURES
•
•
•
•
•
•
Advanced thin film technology
Two pairs or four equal resistor values
TCR down to 25 ppm/K
Tolerance down to 0.5 %
Pure Sn termination on Ni barrier layer
RoHS compliant component, compatible with lead (Pb)-free
and lead containing soldering processes
ACAC 0612 (concave terminations) and ACAS 0612 (convex
terminations) thin chip resistor arrays combine the proven
reliability of professional thin film chip resistor products with
the advantages of chip resistor arrays. A small package
enables the design of high density circuits in combination
with reduction of assembly costs. Four equal resistor values
or two pairs are available.
APPLICATIONS
• Voltage divider
• Feedback circuits
• Signal conditioning
• Bus terminations
TECHNICAL SPECIFICATIONS
DESCRIPTION
ACAC 0612, ACAS 0612
EIA size
0612
Metric size
RR1632M
4 x 0603
Configuration, isolated
Design:
All Equal
AE
TP
Two Pairs
Resistance values
Absolute tolerance (2)
Absolute temperature coefficient (2)
Max. resistance ratio Rmin./Rmax.
47 Ω to 221 kΩ (1)
1 %ꢀ 0.5 %
50 ppm/Kꢀ 25 ppm/K
1:10 (3)
(4)
Rated dissipation: P70
Element
0.1 W
0.3 W
75 V
Package, 4 x 0603
Operating voltage
Film temperature
125 °C
Insulation voltage (Uins) against ambient and between isolated
resistors, continuous
75 V
Notes
(1)
Resistance values to be selected from E24, E48 and E96
For TCR tracking, tolerance matching and tighter absolute tolerance please refer to data sheet “Precision Thin Film Chip Resistor Array“
available on our web site at www.vishay.com
(2)
(3)
(4)
Higher resistance ratio is available on request
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat-flow support of the printed
circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high
level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board
materials may be required to maintain the reliability of the assembly.
•
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
www.vishay.com
268
For technical questions, contact: filmresistors.thinfilmarray@vishay.com
Document Number: 28754
Revision: 11-Sep-08
ACAC 0612, ACAS 0612 - Professional
Professional Thin Film Chip Resistor Array
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER: ACASA110012200P500
A
C
A
S
A
1
1
0
0
1
2
2
0
0
P
5
0
0
RESISTANCE
VALUE (2) (3)
ACCURACY
GRADE (4)
RESISTANCE
VALUE (2) (3)
PACKAGING (5)
MODEL
TERMINAL
SIZE
SPECIAL
3 digit
resistance
value R1, R4
3 digit
resistance
value R2, R3
ACA
C = Concave A = 0612
S = Convex
TCR and
Tolerance
P1
P5
PW
00 = Standard
1
2
3
1 digit multiplier
MULTIPLIER
9 = *10-1
1 digit multiplier
MULTIPLIER
9 = *10-1
0 = *100
0 = *100
1 = *101
1 = *101
2 = *102
2 = *102
3 = *103
3 = *103
PRODUCT DESCRIPTION: ACAS 0612 110R 1 220R P5
ACA
S
0612
110R
1
220R
P5
RESISTANCE
ACCURACY
GRADE (4)
RESISTANCE
PACKAGING (5)
MODEL
TERMINATION
SIZE
0612
VALUE R1, R4 (2) (3)
VALUE R2, R3 (2) (3)
ACA = Chip Array
C = Concave
S = Convex
110R = 110 Ω
1K1 = 1.1 kΩ
TCR and
Tolerance
220R = 220 Ω
1K1 = 1.1 kΩ
P1
P5
22K1 = 22.1 kΩ
1
2
3
22K1 = 22.1 kΩ
PW
Notes
(1)
Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION
R1 = R4 ≤ R2 = R3ꢀ please refer to APPLICATION INFORMATION, see below
Different resistance values are available on request
Please refer to table TEMPERATURE COEFFICIENT AND RESISTANCE RANGE, see below
Please refer to table PACKAGING, see below
(2)
(3)
(4)
(5)
PACKAGING
PACKAGING CODE
MODEL
TAPE WIDTH
DIAMETER
PIECES
PITCH
PAPER TAPE
8 mm
8 mm
8 mm
180 mm/7"
180 mm/7"
330 mm/13"
1000
5000
4 mm
4 mm
4 mm
P1
P5
ACAC 0612
ACAS 0612
10 000
PW
DIMENSIONS ACAC 0612 in millimeters
W
W
I
I
2
T
T
1
T
T
1
2
Top view
Bottom view
DIMENSIONS - chip resistor array, mass and relevant physical dimensions
L
W
(mm)
H
(mm)
P
(mm)
WT
(mm)
T1
(mm)
T2
(mm)
d
l1
(mm)
l2
(mm)
MASS
(mg)
TYPE
(mm)
(mm)
ACAC 0612
1.6 0.15 3.2 0.15 0.55 0.1 0.8 0.1 0.5 0.15 0.3 0.15 0.4 0.15 0.3 0.1 min. 0.15 min. 0.25 9.53
Document Number: 28754
Revision: 11-Sep-08
For technical questions, contact: filmresistors.thinfilmarray@vishay.com
www.vishay.com
269
ACAC 0612, ACAS 0612 - Professional
Professional Thin Film Chip Resistor Array
Vishay Beyschlag
DIMENSIONS ACAS 0612 in millimeters
A
T2
T1
H
A1
A
DIMENSIONS - chip resistor array, mass and relevant physical dimensions
W
(mm)
L
H
(mm)
P
(mm)
A1
(mm)
A
(mm)
T1
(mm)
T2
(mm)
MASS
(mg)
TYPE
(mm)
ACAS 0612
1.5 0.15 3.2 0.15 0.45 0.1
0.8 0.1
0.6 0.15 0.4 0.15 0.3 0.15 0.4 0.15
6.59
PATTERN STYLES FOR CHIP RESISTOR ARRAYS
ACAC 0612
ACAS 0612
U
I
X
0.1
Y
Dimensions in mm
limits for solder resistance
Z
G
Y
G
Z
P
0.1
X
I
P
RECOMMENDED SOLDER PAD DIMENSIONS FOR CHIP RESISTOR ARRAYS
TYPE
G (mm)
Y (mm)
X (mm)
U (mm)
Z (mm)
I (mm)
P (mm)
0.8
ACAC 0612
ACAS 0612
0.7
0.7
0.5
-
2.1
0.3
0.8
1.15
0.64
0.44
3.1
0.36
0.8
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
RESISTANCE VALUE
ACAC 0612, ACAS 0612
47 Ω to 221 kΩ
ACCURACY GRADE
ABSOLUTE TCR
25 ppm/K
ABSOLUTE TOLERANCE
1
2
3
0.5 %
0.5 %
1 %
50 ppm/K
47 Ω to 221 kΩ
50 ppm/K
47 Ω to 221 kΩ
www.vishay.com
270
For technical questions, contact: filmresistors.thinfilmarray@vishay.com
Document Number: 28754
Revision: 11-Sep-08
ACAC 0612, ACAS 0612 - Professional
Professional Thin Film Chip Resistor Array
Vishay Beyschlag
APPLICATION INFORMATION
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using reflow or vapour phase as shown in
IEC 61760-1*. For ACAC resistor arrays automatic soldering
using wave can also be used. The encapsulation is resistant
to all cleaning solvents commonly used in the electronics
industry, including alcohols, esters and aqueous solutions.
The suitability of conformal coatings, if applied, shall be
qualified by appropriate means to ensure the long-term
stability of the whole system. The resistors are RoHS
compliantꢀ the pure tin plating provides compatibility with
lead (Pb)-free and lead-containing soldering processes. The
permitted storage time is 20 years, whereas the solderability
is specified for 2 years after production or requalification. The
immunity of the plating against tin whisker growth has been
proven under extensive testing.
R
R
R
R
4
1
2
3
Circuit Type 03
DESCRIPTION
The production of the components is strictly controlled and
follows an extensive set of instructions established for
reproducibility. A homogeneous film of metal alloy is
deposited on a high grade (96 % Al2O3) ceramic substrate
and conditioned to achieve the desired temperature
coefficient. Specially designed inner contacts are realised on
both sides. A special laser is used to achieve the target value
by smoothly cutting a meander groove in the resistive layer
without damaging the ceramics.
All products comply with the GADSL (1) and the
CEFIC-EECA-EICTA (2) list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
• 2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with IEC 60286-3*.
• 2002/95/EC Restriction of the use of Hazardous
Substances directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
Where applicable, the resistors are tested in accordance with
EN 140401-801 which refers to EN 60115-1 and EN 140400.
Notes
(1)
Global Automotive Declarable Substance List, see www.gadsl.org
(2)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see www.eicta.org → issues →
environment policy → chemicals → chemicals for electronics
•
The quoted IEC standards marked with an asterisk (*) are also released as EN standards with the same number and identical contents
Document Number: 28754
Revision: 11-Sep-08
For technical questions, contact: filmresistors.thinfilmarray@vishay.com
www.vishay.com
271
ACAC 0612, ACAS 0612 - Professional
Professional Thin Film Chip Resistor Array
Vishay Beyschlag
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
Category Temperatureꢀ damp heat, long term, 56 days) is
valid.
EN 60115-1, Generic specification (includes tests)
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
EN 140400, Sectional specification (includes schedule for
qualification approval)
Relative humidity: 45 % to 75 %
The testing also covers most of the requirements specified
by EIA/IS-703 and JIS-C-5202.
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar)
In the following table only the tests and requirements are
listed with reference to the relevant clauses of EN 60115-1
and IEC 60068-2*ꢀ a short description of the test procedure
is also given.
The tests are carried out in accordance with IEC 60068*
and under standard atmospheric conditions according to
IEC 60068-1*, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
TEST PROCEDURES AND REQUIREMENTS
IEC
EN
60115-1
CLAUSE
REQUIREMENTS (1)
PERMISSIBLE CHANGE (ΔR)
60068-2*
TEST
PROCEDURE
TEST
METHOD
Stability for product types:
ACAC 0612, ACAS 0612
47 Ω to 221 kΩ
Climatic category
(LCT/UCT/duration)
-
At 20/LCT/ 20 °C and
20/UCT/20 °C
- 55 °C/+ 125 °C/56 days
1 %ꢀ 0.5 %ꢀ 0.25 %
50 ppm/Kꢀ 25 ppm/K
4.5
-
-
Resistance
4.8.4.2
Temperature coefficient
U = P70 x R or U = Umax.ꢀ
1.5 h onꢀ 0.5 h offꢀ
70 °Cꢀ 1000 h
4.25.1
-
Endurance
(0.25 % R + 0.05 Ω)
Endurance at upper
category temperature
Damp heat,
4.25.3
4.24
-
125 °Cꢀ 1000 h
(0.25 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
(40 2) °Cꢀ 56 daysꢀ
(93 3) % RH
U = 2.5 x P70 x R or
U = 2 x Umax.ꢀ 5 s
78 (Cab)
-
steady state
(0.1 % R + 0.01 Ω)
no visible damage
4.13
Short time overload (2)
30 min at LCT and
30 min at UCTꢀ
5 cycles
Reflow method 2
Rapid change of
temperature
(0.1 % R + 0.01 Ω)
no visible damage
4.19
14 (Na)
58 (Td)
Resistance to soldering
heat
(IR/forced gas convention)ꢀ
(0.25 % R + 0.01 Ω)
no visible damage
4.18.2
(260 5) °Cꢀ
(10 1) s
Solder bath methodꢀ
SnPbꢀ non-activated flux
accelerated ageing 4 h/155 °C
(215 3) °Cꢀ (3 0.3) s
Solder bath methodꢀ
SnAgCuꢀ non-activated flux
accelerated ageing 4 h/155 °C
(235 3) °Cꢀ (2 0.2) s
45 N
Good tinning (≥ 95 % covered)ꢀ
4.17.2
58 (Td)
Solderability
no visible damage
4.32
4.33
21 (Ue3)
21 (Ue1)
Shear (adhesion)
Substrate bending
No visible damage
(0.1 % R + 0.01 Ω)
no visible damageꢀ
Depth 2 mm, 3 times
no open circuit in bent position
Urms = Uins
4.7
-
Voltage proof
60 5 sꢀ against ambient,
between adjacent resistors
No flashover or breakdown
Notes
(1)
(2)
Figures are given for equal values
For a single element
•
The quoted IEC standards marked with an asterisk (*) are also released as EN standards with the same number and identical contents
www.vishay.com
272
For technical questions, contact: filmresistors.thinfilmarray@vishay.com
Document Number: 28754
Revision: 11-Sep-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明