ALSR1030K00JE29NI [VISHAY]

Fixed Resistor, Wire Wound, 7W, 30000ohm, 5% +/-Tol, 30ppm/Cel, Through Hole Mount, AXIAL LEADED, GREEN;


型号：	ALSR1030K00JE29NI
厂家：	VISHAY
描述：	Fixed Resistor, Wire Wound, 7W, 30000ohm, 5% +/-Tol, 30ppm/Cel, Through Hole Mount, AXIAL LEADED, GREEN 电阻器
文件：	总3页 (文件大小：81K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ALSR, ALVR

Vishay Huntington

www.vishay.com

Wirewound Resistors, Commercial Power,

Silicone Coated, Axial Lead

FEATURES

• High temperature coating (> 350 °C)

• All welded construction

• Available with “vitreous like appearance”

coating as ALVR

• Available in non-inductive styles with Ayrton-

Perry winding for lowest reactive components,

special “NI”

• Material categorization:

For definitions of compliance please see

www.vishay.com/doc?99912

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING ⁽¹⁾

P_{25 °C}

CHARACTERISTIC U + 250 °C CHARACTERISTIC V + 350 °C

RESISTANCE

RANGE

WEIGHT

(typical)

GLOBAL HISTORICAL

TOLERANCE ⁽²⁾

P_{25 °C}

MODEL

ALSR01

ALVR01

ALSR03

ALVR03

ALSR5A

ALVR5A

ALSR05

ALVR05

ALSR10

ALVR10

ALSR-1

ALVR-1

ALSR-3

ALVR-3

ALSR-5A

ALVR-5A

ALSR-5

ALVR-5

ALSR-10

ALVR-10

0.10 to 6.37K

0.10 to 12K

0.10 to 40.3K

0.10 to 58.5K

0.10 to 92K

1, 3, 5, 10

0.27

0.68

2.1

3.2

4.9

Notes

(1)

Vishay Huntington ALSR/ALVR models have two power ratings depending on operation temperature and stability requirements. Models not

available for characteristic V are: ALSR01, ALVR01, ALSR03, and ALVR03

Other tolerances may be available, contact factory

(2)

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: ALSR0325R00FE12NI

GLOBAL MODEL

(6 digits)

VALUE

(5 digits)

TOLERANCE

(1 digit)

PACKAGING

(3 digits)

SPECIAL

(up to 2 digits)

(See Standard Electrical

Specifications Global

Model column for

options)

R = Decimal

K = Thousand

1R500 = 1.5 Ω

1K500 = 1.5 kΩ

F = 1.0 %

H = 3.0 %

J = 5.0 %

K = 10.0 %

E07 = Tape/reel

(Dash Number)

From 1 to 99

(ALSR5A/ALVR5A, ALSR05/ALVR05)

E08 = Tape/reel (ALSR01/ALVR01)

E29 = Tape/reel (ALSR10/ALVR10)

E48 = Tape/reel (ALSR03/ALVR03)

E12 = Bulk, 100 pc boxes

as applicable

NI = Non-inductive

Historical Part Number example: ALSR-3-25-1 %-NI

ALSR-3

25 Ω

1 %

HISTORICAL MODEL

RESISTANCE VALUE

TOLERANCE

SPECIAL

Revision: 15-Mar-12

Document Number: 31800

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ALSR, ALVR

Vishay Huntington

www.vishay.com

DIMENSIONS in inches [millimeters]

1.50 [38.10]

min.

DIMENSIONS in inches [millimeters]

GLOBAL MODEL

0.032 [0.813]

0.002 [0.051]

ALSR01

ALVR01

ALSR03

ALVR03

ALSR5A

ALVR5A

ALSR05

ALVR05

ALSR10

ALVR10

0.406 [10.31]

0.500 [12.70]

0.920 [23.37]

0.875 [22.23]

1.730 [43.94]

0.110 [2.79]

0.180 [4.57]

0.200 [5.08]

0.312 [7.92]

0.020 [0.508]

0.032 [0.813]

MATERIAL SPECIFICATIONS

DERATING

120

Element: Copper-nickel alloy or nickel-chrome alloy,

depending on resistance value

100

Core: Ceramic: Steatite or alumina, depending on physical

size

Characteristic V

End Caps: Stainless steel

Coating: Special high temperature silicone or special

Characteristic U

formula of “vitreous like appearance” coating on ALVR

Terminals: Tinned Copper clad steel

- 50

- 65

100

150

200

250

300

350

Part Marking: HEI, model, value, tolerance, date code

AMBIENT TEMPERATURE IN °C

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

ppm/°C

RESISTOR CHARACTERISTICS

Temperature Coefficient

Terminal Strength

30 for 10 Ω and above; 50 for 1 Ω to 9.9 Ω; 90 for 0.5 Ω to 0.99 Ω

10 minimum

Dielectric Withstanding Voltage

Operating Temperature Range

Maximum Working Voltage

V_AC

°C

500 for 1 W and 1000 for 3 W and above

Characteristic U = - 65 to + 250, characteristic V = - 65 to + 350

(P x R)^1/2

PERFORMANCE

TEST LIMITS

TEST

CONDITIONS OF TEST

(CHARACTERISTIC V)

(2.0 % + 0.05 Ω) > ΔR

Thermal Shock

Rated power applied until thermally stable, then a minimum of 15 min at - 55 °C

5 x rated power (3 W and smaller), 10 x rated power (4 W and larger) for 5 s

Short Time Overload

Dielectric Withstanding

Voltage

500 V_RMS, 1 min for 1 W and 1000 V_RMS, 1 min for 3 W and above

(0.1 % + 0.05 Ω) > ΔR

Low Temperature Storage

High Temperature Exposure

Mechanical Shock

Vibration

- 65 °C for 24 h

(2.0 % + 0.05 Ω) > ΔR

(4.0 % + 0.05 Ω) > ΔR

(0.2 % + 0.05 Ω) > ΔR

(3.0 % + 0.05 Ω) > ΔR

(2.0 % + 0.05 Ω) > ΔR

250 h at U = + 250 °C, V = + 350 °C

MIL-STD-202 method 213, 100 g’s for 6 ms, 10 shocks

Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each

2000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”

MIL-STD-202 method 106, 7b not applicable

Load Life

Moisture Resistance

Revision: 15-Mar-12

Document Number: 31800

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Revision: 12-Mar-12

Document Number: 91000

ALSR1030K00JE29NI [VISHAY]

相关型号：

ALSR1030K10FE12NI

ALSR1030K90FE12NI

ALSR1030R00FE12

ALSR1030R00FE29

ALSR1030R00HE12NI

ALSR1030R00HE29NI

ALSR1030R00JE12

ALSR1030R00JE12NI

ALSR1030R00JE29

ALSR1030R00JE29NI

ALSR1030R90FE12NI

ALSR1030R90FE29NI