AMF10W39K00J [VISHAY]
Fixed Resistor, Metal Film, 10W, 39000ohm, 1500V, 5% +/-Tol, -250,250ppm/Cel,;型号: | AMF10W39K00J |
厂家: | VISHAY |
描述: | Fixed Resistor, Metal Film, 10W, 39000ohm, 1500V, 5% +/-Tol, -250,250ppm/Cel, |
文件: | 总7页 (文件大小:138K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
End-of-Life Vishay Phoenix Product
AMW, AMF
Vishay Phoenix
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
FEATURES
• High power dissipation in small volume
• Ideal for pulsing applications
• Completely welded construction
• Non-flammable
• High heat and moisture resistance
• Low inductance version available on request
Please reference the Vishay Dale closest equivalents: CP, CP High Volume (for CP datasheet please visit our website:
http://www.vishay.com/doc?30213 and for CP High Volume datasheet: http://www.vishay.com/doc?30113).
Note:
• There may be slight differences between the Vishay Phoenix and the Vishay Dale crosses
TECHNOLOGY
AMW: The resistor element is a resistive wire, which is wound on a ceramic rod.
AMF: The resistive element is a metal film resistor consisting of a metal layer deposited over a high grade ceramic rod.
For both AMW and AMF, tinned copper leads are connected to the caps by welding. The resistor body is housed in a rectangular
ceramic case with a special, inorganic potting which is non-flammable, will not melt even at high overloads and is resistant to
most commonly used cleaning solvents.
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
E-SERIES
Decade
Values
RESISTANCE RANGE (1)
TOLERANCE (2)
%
MODEL
P40 °C
Ω
W
AMW03
AMF03
AMW0ꢀ
AMF0ꢀ
AMW07
AMF07
AMW10
AMF10
AMW1ꢀ
AMW20
0.1 - 2.0K
100 - 39K
0.1 - 4.7K
100 - ꢀ1K
0.1 - 6.2K
100 - ꢀ1K
0.1 - 10K
1K - 100K
0.1 - 10K
0.1 - 1ꢀK
3
ꢀ
7
ꢀ
24
10
1ꢀ at 2ꢀ °C
20 at 2ꢀ °C
Notes:
(1) Special resistance values available upon request
(2) Other tolerances available upon request
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
AMW
AMF03
AMF05
AMF07
1200
AMF10
Limiting Voltage
Insulation Voltage
V
V
P x R
7ꢀ0
1000
1ꢀ00
> 2000
R < 10 Ω: 0 to 600;
R ≥ 10 Ω: - 100 to + 1ꢀ0;
Temperature Coefficient (3)
ppm/°C
2ꢀ0
Operating Temperature
Short Time Overload
°C
-
- ꢀꢀ to + 27ꢀ
ꢀ x rated power for ꢀ s
Note:
(3) Temperature Coefficient of 30, ꢀ0 or 90 ppm/ºC available on AMW upon request
www.vishay.com
1
For technical questions, contact: ww2aresistors@vishay.com
Document Number: 30249
Revision: 14-Feb-08
End-of-Life Vishay Phoenix Product
AMW, AMF
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
DIMENSIONS in millimeters (inches)
FLAT VERSION
L
A
L
Ø d
B
H
STAND-OFF VERSION
L
A
L
Ø d
B
H
E
TYPE
A
H
B
E
Ød
L (1)
AMW03
AMF03
22.2 1.ꢀ
(0.87 0.06)
8.0 1.0
(0.32 0.04)
8.0 1.0
(0.32 0.04)
9.ꢀ 1.0
(0.374 0.04)
AMW0ꢀ
AMF0ꢀ
22.2 1.ꢀ
(0.87 0.06)
9.ꢀ 1.0
(0.37 0.04)
9.ꢀ 1.0
(0.37 0.04)
11 1.0
(0.433 0.04)
AMW07
AMF07
3ꢀ 1.ꢀ
(1.38 0.0ꢀ9)
9.ꢀ 1.0
(0.37 0.04)
9.ꢀ 1.0
(0.37 0.04)
11.9 1.0
(0.469 0.04)
0.80 0.03
(0.031 0.001)
28.0 2.ꢀ
(1.11 0.098)
AMW10
AMF10
48
2
9.ꢀ 1.0
(0.37 0.04)
9.ꢀ 1.0
(0.37 0.04)
11.9 1.0
(0.469 0.04)
(1.89 0.079)
48
2
12.ꢀ 1.0
(0.49 0.04)
12.ꢀ 1.0
(0.49 0.04)
1ꢀ.9 1.0
(0.626 0.04)
AMW1ꢀ
AMW20
(1.89 0.079)
63.ꢀ
(2.ꢀ 0.079)
2
12.ꢀ 1.0
(0.49 0.04)
12.ꢀ 1.0
(0.49 0.04)
1ꢀ.9 1.0
(0.626 0.04)
Note:
(1) Long leads (38.1 mm) available on request
ELECTRICAL CHARACTERISTICS
The power that the resistor can dissipate depends on the operating temperature.
100
3 W ꢀ W 7 W 10 W
1ꢀ W 20 W
0
0
2ꢀ 40
27ꢀ
Tamb (°C)
DERATING
Maximum dissipation (Pmax.) in percentage of rated power as a function of ambient temperature (Tamb
)
Notes:
Application information available on request:
• Pulse load behavior
• High frequency behavior (self inductance)
• Hot spot and solder spot curves
Document Number: 30249
Revision: 14-Feb-08
For technical questions, contact: ww2aresistors@vishay.com
www.vishay.com
2
End-of-Life Vishay Phoenix Product
AMW, AMF
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
MARKING
The resistor is marked with the resistor type, the rated power,
the nominal resistance value (R for values Ω and K for values
kΩ), the tolerance and the production date (week and year)
in red on the resistor body.
Example:
PHX
ꢀK1
AMW07
212
7 W
ꢀ %
Example: AMW07 - ꢀ.1 kΩ - ꢀ % - year 2002 - week 12
ORDERING INFORMATION
LEAD Ø
in millimeters
(inches)
ORDERING
QUANTITY
(pieces)
PRODUCT
TOLERANCE
VERSION
PACKAGING
CODE
2306 3ꢀ0 13xxx
2306 3ꢀ0 23xxx
2306 3ꢀ6 13xxx
2306 3ꢀ6 23xxx
2306 3ꢀ1 13xxx
2306 3ꢀ1 23xxx
2306 3ꢀ7 13xxx
2306 3ꢀ7 23xxx
2306 3ꢀ2 13xxx
2306 3ꢀ2 23xxx
2306 3ꢀ8 13xxx
2306 3ꢀ8 23xxx
2306 3ꢀ3 13xxx
2306 3ꢀ3 23xxx
2306 3ꢀ9 13xxx
2306 3ꢀ9 23xxx
2306 3ꢀ4 13xxx
2306 3ꢀ4 23xxx
2306 3ꢀꢀ 13xxx
2306 3ꢀꢀ 23xxx
FLAT
STAND-OFF
FLAT
AMW03
AMF03
AMW0ꢀ
AMF0ꢀ
AMW07
AMF07
AMW10
AMF10
AMW1ꢀ
AMW20
STAND-OFF
FLAT
STAND-OFF
FLAT
STAND-OFF
FLAT
2ꢀ0
STAND-OFF
FLAT
0.80
(0.031)
ꢀ %
BOX
STAND-OFF
FLAT
STAND-OFF
FLAT
STAND-OFF
FLAT
STAND-OFF
FLAT
100
STAND-OFF
Last Digit of Ordering Code
The resistors have 12 digit ordering code starting with 2306.
The next ꢀ digits indicate the resistor type and packaging,
see table ORDERING INFORMATION.
The last 3 digits indicate the resistance value:
- The first 2 digits of these last 3 indicate the actual
resistance value
RESISTANCE
DECADE
LAST DIGIT
0.1 - 0.91 Ω
1 - 9.1 Ω
7
8
9
1
2
3
4
10 - 91 Ω
- The last digit indicates the resistance decade in
accordance with table “Last Digit of Ordering Code”
100 - 910 Ω
1 - 9.1 kΩ
10 - 91 kΩ
100 - 910 kΩ
Example:
AMW0ꢀ, 47 Ω,
ꢀ %, flat case, box of 2ꢀ0 pieces is
230635113479
www.vishay.com
3
For technical questions, contact: ww2aresistors@vishay.com
Document Number: 30249
Revision: 14-Feb-08
End-of-Life Vishay Phoenix Product
AMW, AMF
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
NAFTA ORDERING INFORMATION
LEAD Ø
in millimeters
(inches)
NAFTA
ORDERING CODE
QUANTITY
(pieces)
PRODUCT
TOLERANCE
VERSION
PACKAGING
AMW03WxxxxxJ
AMW03WxxxxxJSO
AMF03WxxxxxJ
FLAT
STAND-OFF
FLAT
AMW03
AMF03
AMW0ꢀ
AMF0ꢀ
AMW07
AMF07
AMW10
AMF10
AMW1ꢀ
AMW20
AMF03WxxxxxJSO
AMW0ꢀWxxxxxJ
AMW0ꢀWxxxxxJSO
AMF0ꢀWxxxxxJ
STAND-OFF
FLAT
STAND-OFF
FLAT
AMF0ꢀWxxxxxJSO
AMW07WxxxxxJ
AMW07WxxxxxJSO
AMF07WxxxxxJ
STAND-OFF
FLAT
2ꢀ0
STAND-OFF
FLAT
0.80
(0.031)
ꢀ %
BOX
AMF07WxxxxxJSO
AMW10WxxxxxJ
AMW10WxxxxxJSO
AMF10WxxxxxJ
STAND-OFF
FLAT
STAND-OFF
FLAT
AMF10WxxxxxJSO
AMW1ꢀWxxxxxJ
AMW1ꢀWxxxxxJSO
AMW20WxxxxxJ
AMW20WxxxxxJSO
STAND-OFF
FLAT
STAND-OFF
FLAT
100
STAND-OFF
Examples of the Ohmic Value
Value
The ohmic value in the NAFTA ordering code (see table
NAFTA ORDERING INFORMATION) is represented by the
“xxxxx“ in the middle of the above ordering code. The table
“Examples of the Ohmic Value” gives some examples on
how to use these ꢀ digits.
5 DIGITS
1 Ω
10 Ω
1R000
10R00
100R0
1K000
10K00
100K0
100 Ω
1 kΩ
Example:
AMW03, 47 Ω,
ꢀ %, flat case, box of 2ꢀ0 pieces is
230635113479
10 kΩ
100 kΩ
Document Number: 30249
Revision: 14-Feb-08
For technical questions, contact: ww2aresistors@vishay.com
www.vishay.com
4
End-of-Life Vishay Phoenix Product
AMW, AMF
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
PACKAGING in millimeters (inches)
P
N
M
QUANTITY
(pieces)
PRODUCT
VERSION
FLAT
P
M
N
227 (8.94)
227 (8.94)
92 (3.62)
92 (3.62)
92 (3.62)
92 (3.62)
10ꢀ (4.13)
10ꢀ (4.13)
118 (4.6ꢀ)
118 (4.6ꢀ)
119 (4.69)
119 (4.69)
13ꢀ (ꢀ.32)
13ꢀ (ꢀ.32)
100 (3.94)
AMW03
AMF03
STAND-OFF
FLAT
-
2ꢀ6 (10.08)
2ꢀ6 (10.08)
2ꢀ6 (10.08)
2ꢀ6 (10.08)
2ꢀ6 (10.08)
2ꢀ6 (10.08)
264 (10.39)
264 (10.39)
264 (10.39)
264 (10.39)
10ꢀ (4.13)
AMW0ꢀ
AMF0ꢀ
STAND-OFF
FLAT
-
2ꢀ0
10ꢀ (4.13)
AMW07
AMF07
STAND-OFF
FLAT
-
10ꢀ (4.13)
AMW10
AMF10
STAND-OFF
FLAT
-
72 (2.83)
AMW1ꢀ
AMW20
STAND-OFF
FLAT
-
100
72 (2.83)
-
STAND-OFF
www.vishay.com
ꢀ
For technical questions, contact: ww2aresistors@vishay.com
Document Number: 30249
Revision: 14-Feb-08
End-of-Life Vishay Phoenix Product
AMW, AMF
Wirewound/Metal Film Resistors,
Commercial Power, Axial Lead
Vishay Phoenix
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance to the schedule of IEC publications 6011ꢀ-1, category 6ꢀ/27ꢀ/ꢀ6 (rated
temperature range - 6ꢀ °C to + 27ꢀ °C; damp heat, long term, ꢀ6 days and along the lines of IEC publications 60068-2);
“Recommended basic climatic and mechanical robustness testing procedure for electronic components” and under standard
atmosphere conditions according to IEC 60068-1 subclause ꢀ.3, unless otherwise specified. In some instances deviations from
IEC applications were necessary for our method specified.
PERFORMANCE
IEC
IEC
60068-2
60115-1
TEST
PROCEDURE
REQUIREMENTS
TEST
METHOD
CLAUSE
ꢀ00 VDC during 1 min;
V-block method
4.6.1.1
4.7
Insulation resistance
Rins min 100 MΩ
Voltage proof on
insulation
1000 VRMS during 1 min;
V-block method
No breakdown or flashover
Between
- ꢀꢀ °C at + 27ꢀ °C
AMW
Temperature
coefficient
4.8
R < 10 Ω
R ≥ 10 Ω
0 to 600 ppm/°C;
- 100 to 1ꢀ0 ppm/°C
AMF
2ꢀ0 ppm/°C
Dissipation ꢀ x Pn; ꢀ s, Vmax. for:
AMF03 ≤ 1ꢀ00 V
4.13
Short time overload
AMF0ꢀ ≤ 2000 V
ΔR/Rmax. 4 % + 0.0ꢀ Ω
AMF07 ≤ 2ꢀ00 V
AMF10 ≤ 3000 V
Robustness of
terminations:
4.16
21(U)
21(Ua1)
21(Ub)
4.16.2
4.16.3
Tensile all samples
Load 10 N; 10 s
Load ꢀ N; 4 x 90°
No visible damage
ΔR/Rmax. 2 % + 0.0ꢀ Ω
Bending half number
of samples
Tension other half
of samples
3 x 360° in
opposite directions
4.16.4
21(Uc)
16 h at 1ꢀꢀ °C;
leads immersed in flux 600,
leads immersed 2 mm
for 2 0.ꢀ s
Solderability
(after aging)
Good tinning; no damage
ΔR/Rmax. 0.ꢀ % + 0.0ꢀ Ω
4.17
20(Ta)
in a solder bath at 23ꢀ ꢀ °C
Resistance to
soldering heat
Thermal shock: 3 s,
3ꢀ0 °C; 6 mm from body
4.18
4.19
20(Tb)
14(Na)
ΔR/Rmax. 4 % + 0.0ꢀ Ω
30 min at - ꢀꢀ °C and
30 min + 27ꢀ °C;
ꢀ cycles
Rapid change of
temperature
No visual damage
ΔR/Rmax. ꢀ % + 0.0ꢀ Ω
4.23
Climatic sequence:
Dry heat
4.23.2
2(Ba)
30(Db)
1(Aa)
16 h, 27ꢀ °C
Damp heat
(accelerated)
1st cycle
24 h, 2ꢀ °C to ꢀꢀ °C;
4.23.3
4.23.4
4.23.6
90 to 100 % RH
ΔR/Rmax. 3 % + 0.0ꢀ Ω
Cold
2 h, - 6ꢀ °C
Damp heat
(accelerated)
6 days; ꢀꢀ °C;
30 (Db)
90 to 98 % RH
remaining cycles
Damp heat
(steady state)
ꢀ6 days; 40 °C; 90 to 9ꢀ % RH;
4.24
3 (Ca)
ΔR/Rmax. 3 % + 0.0ꢀ Ω
loaded with 0.01 Pn
1000 h loaded
Endurance
(at 40 °C)
with Pn or Vmax.
1.ꢀ h ON and
0.ꢀ h OFF
;
No damage
ΔR/Rmax. ꢀ % + 0.1 Ω
4.2ꢀ.1
Document Number: 30249
Revision: 14-Feb-08
For technical questions, contact: ww2aresistors@vishay.com
www.vishay.com
6
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明