BFC233620472
更新时间:2024-09-18 17:05:56
品牌:VISHAY
描述:CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.0047 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
BFC233620472 概述
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.0047 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT 薄膜电容器
BFC233620472 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Not Recommended | 包装说明: | , 4916 |
Reach Compliance Code: | unknown | ECCN代码: | EAR99 |
HTS代码: | 8532.25.00.70 | 风险等级: | 5.18 |
其他特性: | RATED AC VOLTAGE(V): 310, SAFETY CLASS X2 | 电容: | 0.0047 µF |
电容器类型: | FILM CAPACITOR | 介电材料: | POLYPROPYLENE |
高度: | 10 mm | JESD-609代码: | e3 |
长度: | 12.5 mm | 安装特点: | THROUGH HOLE MOUNT |
负容差: | 20% | 端子数量: | 2 |
最高工作温度: | 110 °C | 最低工作温度: | -55 °C |
封装形状: | RECTANGULAR PACKAGE | 封装形式: | Radial |
包装方法: | BULK | 正容差: | 20% |
额定(AC)电压(URac): | 310 V | 额定(直流)电压(URdc): | 630 V |
参考标准: | IEC60384-14 | 尺寸代码: | 4916 |
表面贴装: | NO | 端子面层: | Tin (Sn) |
端子节距: | 10 mm | 端子形状: | WIRE |
宽度: | 4 mm | Base Number Matches: | 1 |
BFC233620472 数据手册
通过下载BFC233620472数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
Interference Suppression Film Capacitors - Class X2
Radial MKP 310 VAC - Standard Across the Line
FEATURES
• 10 mm to 27.5 mm lead pitch
• Supplied loose in box, taped on reel
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
For standard across the line X2 applications
See also application note: www.vishay.com/doc?28153
QUICK REFERENCE DATA
Capacitance range (E12 series)
0.001 μF to 2.2 μF (preferred values acc. to E6)
20 %; 10 %; 5 %
Capacitance tolerance
Climatic testing class according to IEC 60068-1
Rated AC voltage
55/110/56/B
310 VAC; 50 Hz to 60 Hz
Permissible DC voltage
800 VDC at 85 °C, 630 VDC at 110 °C
C 470 nF: 110 °C (125 °C for less than 1000 h), C > 470 nF: 110 °C
Maximum application temperature
IEC 60384-14 ed-4 (2013) and EN 60384-14
IEC 60065, pass. flamm. class B for volumes > 1750 mm3
CQC GB/T6346.14-2015
Reference standards
UL 60384-14; CSA E384-14
Dielectric
Polypropylene film
Metallized film
Electrodes
Mono construction
Construction
Encapsulation
Leads
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Tinned wire
C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation;
code for dielectric material; manufacturer location; manufacturer’s logo;
year and week; safety approvals
Marking
Note
•
For more detailed data and test requirements, contact: rfi@vishay.com
DIMENSIONS in millimeters
l
w
h
lt
Ø d
t
P
0.4
Revision: 12-Sep-17
Document Number: 28120
1
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
MULTIPLIER
(nF)
CAPACITANCE
(numerically)
10.0 mm
336 2
X2
0.1
1
2
3
4
5
15.0 mm
22.5 mm
27.5 mm
10
100
Example:
104 = 10 x 10 = 100 nF
BFC2 336 2X XX X
2222(*) 336 2X XX X
(*) old ordering code
TYPE
PACKAGING
STANDARD DIMENSIONS
C-TOL.
CODE NUMBER
BFC2 336 20…
See tables
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm 0.3 mm
Lead length 5.0 mm 1.0 mm
Loose in box
20 ꢀ
10 ꢀ
Lead length 25.0 mm 2.0 mm
BFC2 336 26…
BFC2 336 23…
BFC2 336 21…
See tables
Taped on reel (1)
Loose in box
H = 18.5 mm; P0 = 12.7 mm
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm 0.3 mm
Lead length 5.0 mm 1.0 mm
Lead length 25.0 mm 2.0 mm
BFC2 336 27…
BFC2 336 24…
BFC2 336 22…
See tables
Taped on reel (1)
Loose in box
H = 18.5 mm; P0 = 12.7 mm
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm 0.3 mm
Lead length 5.0 mm 1.0 mm
5 ꢀ
C-TOL.
20 ꢀ
336 2
X2
Lead length 25.0 mm 2.0 mm
BFC2 336 28…
Taped on reel (1)
H = 18.5 mm; P0 = 12.7 mm
BFC2 336 25…
PACKAGING
ALTERNATIVE LARGER PITCH SIZES
CODE NUMBER
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm 0.3 mm
Lead length 5.0 mm 1.0 mm
Loose in box
Lead length 25.0 mm 2.0 mm
Taped on reel (1)
Loose in box
H = 18.5 mm; P0 = 12.7 mm
See tables for details
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm 0.3 mm
Lead length 5.0 mm 1.0 mm
10 ꢀ
Lead length 25.0 mm 2.0 mm
Taped on reel (1)(2)
H = 18.5 mm P0 = 12.7 mm
Notes
(1)
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Taped on reel pitch = 27.5 mm is not available
(2)
Revision: 12-Sep-17
Document Number: 28120
2
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
310 V
Rated AC voltage URAC
Permissible DC voltage URDC
Tangent of loss angle:
630 V
at 1 kHz
at 10 kHz
20 x 10-4
70 x 10-4
-
C < 470 nF
10 x 10-4
20 x 10-4
30 x 10-4
470 nF C 1 μF
C > 1 μF
Rated voltage pulse slope (dU/dt)R at 435 VDC
Pitch = 10 mm
-
600 V/μs
400 V/μs
150 V/μs
100 V/μs
> 15 000 M
> 5000 s
> 30 000 M
Pitch = 15 mm and 7.5 mm (bent back)
Pitch = 22.5 mm
Pitch = 27.5 mm
R between leads, for C 0.33 μF at 100 V; 1 min
RC between leads, for C > 0.33 μF at 100 V; 1 min
R between leads and case; 100 V; 1 min
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s:
C 1 μF
2200 V; 1 min
1800 V; 1 min
2120 V; 1 min
C > 1 μF
Withstanding (AC) voltage between leads and case
Max. application temperature for 0.001 μF C 0.47 μF
Max. application temperature for C > 0.47 μF
110 °C (125 °C for less than 1000 h)
110 °C
Note
(1)
See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE - PITCH 10 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
LOOSE IN BOX
REEL (500 mm) (1)(2)
DIMENSIONS
w x h x l
(mm)
URAC
(V)
CAP.
(μF)
MASS
(g) (3)
H = 18.5 mm
P0 = 12.7 mm
SHORT LEADS
LONG LEADS
lt = 25.0 mm
lt = 3.5 mm
lt = 5.0 mm
1.0 mm
SPQ
SPQ
SPQ
+ 1 mm/- 0.5 mm
2.0 mm
PITCH = 10.0 mm 0.4 mm; dt = 0.6 mm 0.06 mm; C-TOL. = 20 ꢀ
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
20102
20152
20222
20332
20472
20682
20103
20153
20223
20333
29131
29132
29133
29134
29135
29136
29137
29138
29139
29141
26102
26152
26222
26332
26472
26682
26103
26153
26223
26333
23102
23152
23222
23332
23472
23682
23103
23153
23223
23333
1250
1400
1000
4.0 x 10.0 x 12.5
0.6
1000
750
1100
900
310
0.015
0.022
0.033
750
PITCH = 10.0 mm 0.4 mm; dt = 0.6 mm 0.06 mm; C-TOL. = 10 ꢀ
0.0010
0.0012
0.0015
0.0018
0.0022
21102
21122
21152
21182
21222
29154
-
27102
27122
27152
27182
27222
24102
24122
24152
24182
24222
4.0 x 10.0 x 12.5
0.6
29155
-
1000
1250
1400
29156
Revision: 12-Sep-17
Document Number: 28120
3
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE - PITCH 10 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
LOOSE IN BOX
REEL (500 mm) (1)(2)
DIMENSIONS
w x h x l
(mm)
URAC
(V)
CAP.
(μF)
MASS
(g) (3)
H = 18.5 mm
P0 = 12.7 mm
SHORT LEADS
LONG LEADS
lt = 3.5 mm
+ 1 mm/- 0.5 mm
lt = 5.0 mm
1.0 mm
lt = 25.0 mm
2.0 mm
SPQ
SPQ
SPQ
PITCH = 10.0 mm 0.4 mm; dt = 0.6 mm 0.06 mm; C-TOL. = 10 ꢀ
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.010
21272
21332
21392
21472
21562
21682
21822
21103
21123
21153
21183
21223
21273
21333
-
27272
27332
27392
27472
27562
27682
27822
27103
27123
27153
27183
27223
27273
27333
24272
29157
24332
24392
24472
24562
24682
24822
24103
24123
24153
24183
24223
24273
24333
-
29158
-
29159
1000
1000
1100
-
29161
-
4.0 x 10.0 x 12.5
0.6
0.012
0.015
29162
-
0.018
0.022
29163
-
0.027
750
750
900
0.033
29164
PITCH = 10.0 mm 0.4 mm; dt = 0.6 mm 0.06 mm; C-TOL. = 5 ꢀ
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.010
22102
22122
22152
22182
22222
22272
22332
22392
22472
22562
22682
22822
22103
22123
22153
22183
22223
22273
22333
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
28102
28122
28152
28182
28222
28272
28332
28392
28472
28562
28682
28822
28103
28123
28153
28183
28223
28273
28333
25102
25122
25152
25182
25222
25272
25332
25392
25472
25562
25682
25822
25103
25123
25153
25183
25223
25273
25333
310
1250
1400
1000
4.0 x 10.0 x 12.5
0.6
1000
1100
0.012
0.015
0.018
0.022
0.027
750
750
900
0.033
Notes
•
SPQ = Standard Packing Quantity
H = In-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
Reel diameter = 356 mm is available on request
(1)
(2)
(3)
Weight for short lead product only
Revision: 12-Sep-17
Document Number: 28120
4
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE - PITCH 15 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
LOOSE IN BOX
REEL (500 mm) (1)(2)
URAC
(V)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
H = 18.5 mm
P0 = 12.7 mm
CAP.
(μF)
SHORT LEADS
LONG LEADS
lt = 25.0 mm
lt = 3.5 mm
0.3 mm
lt = 5.0 mm
1.0 mm
SPQ
SPQ
SPQ
2.0 mm
PITCH = 15 mm 0.4 mm; dt = 0.60 0.06 mm; C-TOL. = 20 ꢀ
0.010
0.015
0.022
0.033
0.047
0.068
0.10
29001
29011
29021
29031
20473
20683
20104
20154
29273
29274
29275
29276
29142
29143
29144
29145
29097
29071
29076
29082
26473
26683
26104
26154
29004
29014
29024
29034
23473
23683
1100
5.0 x 11.0 x 17.5
0.98
1000
1000
23104
23154
900
650
0.15
6.0 x 12.0 x 17.5
7.0 x 13.5 x 17.5
1.4
500
PITCH = 15 mm 0.4 mm; dt = 0.80 0.08 mm; C-TOL. = 20 ꢀ
1.8 20224 29146 500 26224
PITCH = 15 mm 0.4 mm; dt = 0.60 0.06 mm; C-TOL. = 10 ꢀ
0.22
500
1000
500
23224
600
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
29002
29007
29012
29017
29022
29027
29032
21393
21473
21563
21683
21823
21104
21124
21154
29281
-
29282
-
29283
-
29284
-
29165
-
29166
-
29167
-
29168
29066
29068
29072
29074
29077
29079
29083
27393
27473
27563
27683
27823
27104
27124
27154
29005
29009
29015
29019
29025
29029
29035
24393
24473
24563
24683
24823
24104
24124
24154
1100
5.0 x 11.0 x 17.5
0.98
1000
900
800
650
310
0.12
0.15
6.0 x 12.0 x 17.5
7.0 x 13.5 x 17.5
1.4
PITCH = 15 mm 0.4 mm; dt = 0.80 0.08 mm; C-TOL. = 10 ꢀ
0.18
0.22
21184
21224
-
27184
27224
24184
24224
1.8
500
500
600
29169
PITCH = 15 mm 0.4 mm; dt = 0.60 0.06 mm; C-TOL. = 5 ꢀ
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
29003
29008
29013
29018
29023
29028
29033
22393
22473
22563
22683
22823
22104
22124
22154
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
29067
29069
29073
29075
29078
29081
29084
28393
28473
28563
28683
28823
28104
28124
28154
29006
29061
29016
29062
29026
29063
29036
25393
25473
25563
25683
25823
25104
25124
25154
1100
1000
5.0 x 11.0 x 17.5
0.98
1000
900
800
650
0.12
0.15
500
500
6.0 x 12.0 x 17.5
7.0 x 13.5 x 17.5
1.4
PITCH = 15 mm 0.4 mm; dt = 0.80 0.08 mm; C-TOL. = 5 ꢀ
1.8 22184 500 28184
0.18
-
25184
600
Notes
•
SPQ = Standard Packing Quantity
H = In-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
Reel diameter = 356 mm is available on request
(1)
(2)
(3)
Weight for short lead product only
Revision: 12-Sep-17
Document Number: 28120
5
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE - PITCH 22.5 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
LOOSE IN BOX
SHORT LEADS
REEL (500 mm) (1)(2)
DIMENSIONS
w x h x l
(mm)
URAC CAP.
MASS
(g) (3)
H = 18.5 mm
LONG LEADS
(V)
(μF)
P0 = 12.7 mm
SPQ
lt = 3.5 mm
0.3 mm
lt = 5.0 mm
1.0 mm
lt = 25.0 mm
2.0 mm
SPQ
SPQ
PITCH = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 20 ꢀ
0.15
0.22
0.33
0.47
29041
29051
20334
20474
29277
29278
29147
29148
29087
29093
26334
26474
29044
29053
23334
23474
600
550
450
400
6.0 x 15.5 x 26.0
7.0 x 16.5 x 26.0
2.4
300
500
2.9
200
500
PITCH = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 10 ꢀ
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
29037
29042
29047
29052
21274
21334
21394
21474
-
29285
-
29085
29088
29091
29094
27274
27334
27394
27474
29039
29045
29049
29054
24274
24334
24394
24474
600
550
450
400
6.0 x 15.5 x 26.0
7.0 x 16.5 x 26.0
2.4
300
29286
-
500
310
29171
-
2.9
200
29172
PITCH = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 5 ꢀ
0.12
0.15
0.18
0.22
0.27
0.33
0.39
29038
29043
29048
22224
22274
22334
22394
-
-
-
-
-
-
-
29086
29089
29092
28224
28274
28334
28394
29064
29046
29065
25224
25274
25334
25394
600
550
6.0 x 15.5 x 26.0
7.0 x 16.5 x 26.0
2.4
2.9
300
200
500
450
400
Notes
•
SPQ = Standard Packing Quantity
H = In-tape height; P0 = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
Reel diameter = 356 mm is available on request
(1)
(2)
(3)
Weight for short lead product only
Revision: 12-Sep-17
Document Number: 28120
6
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
ELECTRICAL DATA AND ORDERING CODE - PITCH 27.5 mm
CATALOG NUMBER BFC2 336 ..... AND PACKAGING
LOOSE IN BOX
SHORT LEADS
lt = 5.0 mm
DIMENSIONS
w x h x l
(mm)
URAC
(V)
CAP.
(μF)
MASS
(g) (1)
LONG LEADS
lt = 3.5 mm
0.3 mm
lt = 25.0 mm
SPQ
SPQ
1.0 mm
2.0 mm
PITCH = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 20 ꢀ
0.47
0.68
1.0
29055
20684
20105
20155
20225
29279
29149
29151
29152
29153
29095
26684
26105
26155
26225
150
125
75
9.0 x 19.0 x 31.5
5.5
11.0 x 21.0 x 31.0
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.5
7.4
9.2
100
1.5
2.2
12.3
PITCH = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 10 ꢀ
0.47
0.56
0.68
0.82
1.0
29056
21564
21684
21824
21105
21125
21155
21185
21225
29287
29096
27564
27684
27824
27105
27125
27155
27185
27225
150
9.0 x 19.0 x 31.5
5.5
-
29173
-
11.0 x 21.0 x 31.0
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.5
7.4
9.2
125
75
29174
-
100
1.2
310
1.5
29175
-
1.8
12.3
2.2
29176
PITCH = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 5 ꢀ
0.47
0.56
0.68
0.82
1.0
22474
22564
22684
22824
22105
22125
22155
22185
22225
-
-
-
-
-
-
-
-
-
28474
28564
28684
28824
28105
28125
28155
28185
28225
9.0 x 19.0 x 31.5
5.5
125
11.0 x 21.0 x 31.0
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.5
7.4
9.2
100
1.2
1.5
1.8
12.3
75
2.2
Notes
•
SPQ = Standard Packing Quantity
Weight for short lead product only
(1)
Revision: 12-Sep-17
Document Number: 28120
7
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
APPROVALS
SAFETY APPROVALS X2
VOLTAGE
VALUE
FILE NUMBERS
LINK
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-4 (2013))
310 VAC
1 nF to 2.2 μF
FI 2016052
www.vishay.com/doc?28179
UL 60384-14
310 VAC
310 VAC
1 nF to 2.2 μF
1 nF to 2.2 μF
E354331
E354331
www.vishay.com/doc?28184
CSA-E 384-14
CQC07001021280 (L)
CQC04001009262 (F)
FI 9369
www.vishay.com/doc?28199
www.vishay.com/doc?28200
www.vishay.com/doc?28175
CQC GB/T6346.14-2015
310 VAC
1 nF to 2.2 μF
CB test certificate
310 VAC
1 nF to 2.2 μF
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in pinted-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed
circuit board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped.
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
• For products with pitch 15 mm, w = l = 0.3 mm; h = 0.1 mm
• For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm; h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
CBA116
Imax. = I + Δ
hmax. = h + Δ
Seating plane
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % 2 %.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 12-Sep-17
Document Number: 28120
8
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
CHARACTERISTICS
3
4
10
1 nF
4.7 nF
10 n
2
typical
47 nF
100 nF
1
0
0
- 2
- 4
- 6
10
10
470 nF
max.
1000 nF
-1
10
10
min.
Tamb (°C) 100
-2
- 50
0
50
4
5
6
7
8
f (Hz)
10
10
10
10
10
Capacitance as a function of ambient temperature
(typical curve)
Impedance as a function of frequency
(typical curve)
102
103
101
102
101
1 µF
1 µF
>
≤
C
< C
220 nF
≤
220 nF
47 nF
10 nF
≤
≤
47 nF < C
< C
100
10 nF
C
100
10-1
101
102
103
104
105
f (Hz)
C (nF)
10 000
1
10
100
1000
Tangent of loss angle as a function of frequency
(typical curve)
Resonant frequency as a function of capacitance
(typical curve)
103
10 4
2200 nF
1000 nF
470 nF
10 2
10 1
100 nF
47 nF
102
10 nF
4.7 nF
10 0
1nF
Tamb ≤ 110 °C
Tamb
≤
110 °C
10 -1
101
101
102
103
104
105
10 1
10 2
10 3
104
105
f (Hz)
f (Hz)
Max. RMS voltage as a function of frequency
(typical curve)
Max. RMS current as a function of frequency
(typical curve)
Revision: 12-Sep-17
Document Number: 28120
9
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
106
105
104
80
Insulation resistance
0
20
40
60
100
Tamb (°C)
APPLICATION NOTES
• For X2 electromagnetic interference suppression in standard across the line applications (50/60 Hz) with a maximum mains
voltage of 310 VAC
.
• For series impedance applications we refer to the application note www.vishay.com/doc?28153
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com.
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C 470 nF and 110 °C for
C > 470 nF
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and
divided by the applied voltage
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC Publication
IEC 60384-14 ed-4 (2013) and Specific Reference Data”.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF
SAMPLE OF SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapters “General Data” of this
specification
Initial measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.3 Robustness of terminations
4.4 Resistance to soldering heat
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
No visible damage
No pre-drying
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 10 s
Revision: 12-Sep-17
Document Number: 28120
10
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF
SAMPLE OF SUB-GROUP C1
4.19 Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time:
Min. 1 h, max. 2 h
4.4.2 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured initially
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation resistance”
of this specification
SUB-GROUP C1B PART OF
SAMPLE OF SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.20 Solvent resistance of the
marking: see section
Isopropylalcohol at room temperature
Method: 1
No visible damage
Legible marking
“General notes”; item 5
Rubbing material: Cotton wool
Immersion time: 5 min 0.5 min
4.6 Rapid change of temperature
A = - 55 °C
B = + 110 °C
5 cycles
Duration t = 30 min
4.6.1 Inspection
4.7 Vibration
Visual examination
No visible damage
Mounting: See section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/sꢀ
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection
4.9 Shock
Visual examination
No visible damage
Mounting: See section “Mounting” for more
information
Pulse shape: Half sine
Acceleration: 490 m/sꢀ
Duration of pulse: 11 ms
Revision: 12-Sep-17
Document Number: 28120
11
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B PART OF
SAMPLE OF SUB-GROUP C1
4.9.2 Final measurements
Visual examination
Capacitance
No visible damage
|C/C| 5 % of the value measured initially
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation resistance”
of this specification
SUB-GROUP C1
COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.11 Climatic sequence
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 110 °C
4.11.3 Damp heat cyclic
Test Db
Duration: 16 h
First cycle
4.11.4 Cold
Temperature: - 55 °C
4.11.5 Damp heat cyclic
Test Db
Duration: 2 h
remaining cycles
4.11.6 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.11.1.
Voltage proof
No permanent breakdown or flash-over
1350 VDC; 1 min between terminations
Insulation resistance
50 % of values specified in section “Insulation
resistance” of this specification
SUB GROUP C2
4.12 Damp heat steady state
56 days, 40 °C, 90 % to 95 % RH
No load
4.12.1 Initial measurements
Capacitance
Tangent of loss angle at 1 kHz
Revision: 12-Sep-17
Document Number: 28120
12
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB GROUP C2
4.12.3 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C| 5 % of the value measured in 4.12.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.12.1.
Voltage proof
No permanent breakdown or flash-over
1350 VDC; 1 min between terminations
Insulation resistance
50 % of values specified in section “Insulation
resistance” of this specification
SUB-GROUP C3
4.13.1 Initial measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.13 Impulse voltage
4.14 Endurance
3 successive impulses, full wave, peak voltage:
2.5 kV for C 1 μF
2.5 kV/C for C > 1 μF
No selfhealing breakdowns or flashover
Max. 24 pulses
Duration: 1000 h
1.25 x URAC at 110 °C
Once in every hour the voltage is increased to
1000 VRMS for 0.1 s via resistor of 47 5 %
4.14.7 Final measurements
Visual examination
Capacitance
No visible damage
Legible marking
|C/C| 10 % compared to values measured in
4.13.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.13.1.
Voltage proof
No permanent breakdown or flash-over
1350 VDC; 1 min between terminations
2120 VAC; 1 min between terminations
and case
Insulation resistance
50 % of values specified in section “Insulation
resistance” of this specification
SUB-GROUP C4
4.15 Charge and discharge
10 000 cycles
Charged to 435 VDC
Discharge resistance:
435 VDC
R = -----------------------------------------------
1.25 x C dU/dt
Revision: 12-Sep-17
Document Number: 28120
13
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP339 X2
MKP336 2 X2
Vishay BCcomponents
www.vishay.com
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C4
4.15.1 Initial measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.15.3 Final measurements
Capacitance
|C/C| 10 % compared to values measured in
4.15.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.15.1.
Insulation resistance
Resonance frequency
50 % of values specified in section “Insulation
resistance” of this specification
SUB-GROUP C5
4.16 Radio frequency
characteristic
0.9 times the value as specified in section
“Resonant frequency” of this specification
SUB-GROUP C6
4.17 Passive flammability
Class B
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mmꢁ:
V 250: 10 s
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 10 s. No burning particle must drop from
the sample.
250 < V 500: 20 s
500 < V 1750: 30 s
V > 1750: 60 s
One flame application
12 mm
~ 8 mm
45.0°
SUB-GROUP C7
4.18 Active flammability
20 cycles of 2.5 kV discharges on the test
The cheese cloth around the capacitors shall
not burn with a flame.
capacitor connected to URAC
.
No electrical measurements are required.
Revision: 12-Sep-17
Document Number: 28120
14
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
BFC233620472 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
BFC233620473 | VISHAY | Interference Suppression Film Capacitors MKP Radial Potted Type | 获取价格 | |
BFC233620474 | VISHAY | Interference Suppression Film Capacitors MKP Radial Potted Type | 获取价格 | |
BFC2336205 | VISHAY | Interference Suppression Film Capacitors MKP Radial Potted Type | 获取价格 | |
BFC233620682 | VISHAY | Interference Suppression Film Capacitors MKP Radial Potted Type | 获取价格 | |
BFC233620683 | VISHAY | Interference Suppression Film Capacitors MKP Radial Potted Type | 获取价格 | |
BFC233620684 | VISHAY | Interference Suppression Film Capacitors MKP Radial Potted Type | 获取价格 | |
BFC233621102 | VISHAY | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
BFC233621103 | VISHAY | Interference Suppression Film Capacitors MKP Radial Potted Type | 获取价格 | |
BFC233621104 | VISHAY | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.1 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
BFC233621105 | VISHAY | Interference Suppression Film Capacitors MKP Radial Potted Type | 获取价格 |
BFC233620472 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6