BRT13H-X017T [VISHAY]
Trigger Output Optocoupler;
| 型号： | BRT13H-X017T |
| 厂家： | 
VISHAY |
| 描述： | Trigger Output Optocoupler 输出元件 光电 |
| 文件： | 总6页 (文件大小：207K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BRT11, BRT12, BRT13
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototriac Output, Non-Zero Crossing
FEATURES
• ITRMS = 300 mA
• High static dV/dt < 10 000 V/μs
• Electrically insulated between input and output
circuit
A
1
6
MT2
• Microcomputer compatible - very low trigger
current
C
2
3
5
4
NC
• Trigger current
- (IFT < 1.2 mA) BRT12F
NC
MT1
- (IFT < 2 mA) BRT11H, BRT12H, BRT13H
- (IFT < 3 mA) BRT11M, BRT12M, BRT13M
• Non-zero voltage detectors high input sensitivity
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
i179004-10
DESCRIPTION
APPLICATIONS
• Industrial controls
• Office equipment
• Consumer appliances
The BRT11, BRT12, and BRT13 product family consists of
AC optocouplers non-zero voltage detectors consisting of
two electrically insulated lateral power ICs which integrate a
thyristor system, a photo detector and noise suppression at
the output and an IR GaAs diode input.
AGENCY APPROVALS
• UL 1577, file no. E52744 system code H
• DIN EN 60747-5-2 (VDE 0844)/DIN EN 60747-5-5
(pending) available with option 1
• CQC
ORDERING INFORMATION
DIP-6
Option 6
B
R
T
1
#
x
-
X
0
#
#
T
10.16 mm
Option 9
PART NUMBER
PACKAGE OPTION
TAPE
AND
7.62 mm
Option 7
REEL
> 0.1 mm
> 0.7 mm
V
DRM (V)
AGENCY
CERTIFIED/PACKAGE
≤ 400
≤ 600
≤ 800
IFT = 2 mA
UL
IFT = 2 mA IFT = 3 mA
IFT = 1.2 mA
BRT12F
IFT = 2 mA
BRT12H
IFT = 3 mA
IFT = 3 mA
DIP-6
BRT11H
BRT11M
BRT12M
BRT13H
BRT13M
DIP-6, 400 mil, option 6
SMD-6, option 7
SMD-6, option 9
UL, VDE
-
-
-
-
-
-
BRT12F-X006
BRT12F-X007T (1) BRT12H-X007T (1)
BRT12H-X006
-
BRT13H-X006
BRT13H-X007T (1)
BRT13H-X009T
IFT = 2 mA
-
-
-
-
BRT12H-X009T
IFT = 2 mA
BRT12H-X001
BRT12H-X016
-
-
-
IFT = 2 mA IFT = 3 mA
IFT = 1.2 mA
IFT = 3 mA
IFT = 3 mA
DIP-6
-
-
-
-
-
-
-
BRT12M-X001
BRT12M-X016
-
-
-
-
-
DIP-6, option 6
SMD-6, option 7
BRT12F-X016
-
BRT13H-X016
BRT13H-X017T (1)
Note
(1)
Also available in tube, do not put T on the end.
Rev. 1.6, 02-Dec-11
Document Number: 83689
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BRT11, BRT12, BRT13
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
Forward current
Surge forward current
Power dissipation
OUTPUT
VR
IF
6
V
mA
A
20
1.5
30
IFSM
Pdiss
t ≤ 10 μs
mW
BRT11
BRT12
BRT13
VDRM
VDRM
VDRM
ITRMS
ITSM
400
600
800
300
3
V
V
Repetitive peak off-state voltage
V
RMS on-state current
Single cycle surge current
Power dissipation
mA
A
50 Hz
Pdiss
600
mW
COUPLER
Maximum power dissipation
Ptot
630
mW
Isolation test voltage
(between emitter and detector, climate
VISO
5300
VRMS
per DIN 500414, part 2, Nov. 74) (1)
Reference voltage in accordance
with VDE 0110 b
Vref
Vref
500
600
VRMS
VDC
Reference voltage in accordance
with VDE 0110 b (insulation group C)
Creepage distance
Clearance distance
≥ 7.2
≥ 7.2
mm
mm
Comparative tracking index per
DIN IEC 112/VDE 0303 part 1
group IIIa according to
DIN VDE 0109
CTI
≥ 175
V
IO = 500 V, Tamb = 25 °C
RIO
RIO
≥ 1012
≥ 1011
Ω
Ω
Isolation resistance
VIO = 500 V, Tamb = 100 °C
Storage temperature range
Ambient temperature range
Tstg
Tamb
- 40 to + 150
- 40 to + 100
°C
°C
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
Test AC voltage in accordance with DIN 57883, June 1980.
Rev. 1.6, 02-Dec-11
Document Number: 83689
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BRT11, BRT12, BRT13
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Reverse current
IF = 10 mA
VF
IR
1.1
1.35
10
V
V
R = 6 V
μA
Thermal resistance,
RthJA
750
°C/W
junction to ambient (1)
OUTPUT
BRT11
BRT12
BRT13
400
600
800
0.5
μA
μA
μA
μA
V
Peak off-state voltage
I
D(RMS) = 100 μA
VDM
Off-state current
On-state voltage
T
C = 80 °C, VDRM
IT = 300 mA
ID
100
2.3
VT
tp ≤ 5 μs, f = 100 Hz,
dItp/dt ≤ 8 A/μs
Pulse current
Itp
2
A
V
D = 0.67 VDRM, Tj = 25 °C
D = 0.67 VDRM, Tj = 80 °C
dV/dtcr
dV/dtcr
10
5
kV/μs
kV/μs
Critical rate of rise of off-state
voltage
V
V
V
D = 0.67 VDRM, Tj = 25 °C,
dV/dtcrq
dV/dtcrq
10
5
kV/μs
kV/μs
dI/dtcrq ≤ 15 A/ms
Critical rate of rise of voltage at
current commutation
D = 0.67 VDRM, Tj = 80 °C,
dI/dtcrq ≤ 15 A/ms
Critical rate of rise of on-state at
current
dI/dtcr
IH
8
A/μs
μA
Holding current
V
D = 10 V
80
500
125
Thermal resistance, junction to
ambient
RthJA
°C/W
COUPLER
V
D = 10 V, F - versions
IFT
IFT
IFT
1.2
2
mA
mA
mA
Trigger current
V
D = 10 V, H - versions
0.4
0.8
V
D = 10 V, M - versions
3
Trigger current temperature
gradient
ΔIFT/ΔTj
7
14
2
μA/°C
pF
Capacitance (input to output)
f = 1 MHz, VR = 0 V
CIO
Notes
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Static air, SITAC soldered in PCB or base plate.
(1)
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
3
0.6
W
10
tgd
P
=
P
(ITRMS
)
tot
tot
tgd= f(IF/IFT25 °C)
0.5
VD = 200 V
2
10
0.4
5
TJ = 25°C
100°C
0.3
0.2
180°
120°
90°
1
10
60°
5
30°
0.1
0.0
0
10
1
0
2
5
5
0
200 mA
300
10
100
10
10
17240
IF/IFT25°C
17239
/
TRMS
Fig. 1 - Typical Trigger Delay Time
Rev. 1.6, 02-Dec-11
Fig. 2 - Power Dissipation 60 Hz to 60 Hz Line Operation
Document Number: 83689
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BRT11, BRT12, BRT13
www.vishay.com
Vishay Semiconductors
- 3
- 3
10
10
ID
I
I
= ƒ(V )
T
nA
T
T
ID = f(T )
j
mA
V
= 800 V
D
- 2
5
T = 25 °C
10
10
10
j
100 °C
- 2
10
5
- 1
5
- 1
5
10
10
- 0
5
- 0
0
17244
- 1
10
1
0
20
40
60
2
3
V
4
°C 100
TJ
80
17241
V
T
Fig. 3 - Typical Off-State Current
Fig. 6 - Typical Output Characteristics
400
ITRMS
mA
I
=ƒ(T )
=125 K/W3)
A
TRMS
IFTN=f(tpIF)
IFTN normalized to IFT refering
R
thJA
300
to tpIF ≥ 1 m
Vop=220V,f= 4 0 ...60Hz typ.
200
100
0
60
100
0
20
40
80 °C
TA
17242
17245
Fig. 4 - Pulse Trigger Current
Fig. 7 - Current Reduction
- 2
10
IF
I
= ƒ(V )
F
F
mA
T
j
= 75 °C
50 °C
- 1
5
10
10
10
25 °C
- 0
5
ITRMS = ƒ(TPIN5)
RthJ-PIN5= 16,5 K/W 4)
- 1
0.9
17243
V
1.0
1.1
1.2
17246
VF
Fig. 5 - Typical Input Characteristics
Fig. 8 - Current Reduction
Rev. 1.6, 02-Dec-11
Document Number: 83689
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BRT11, BRT12, BRT13
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
pin one ID
3
2
1
6.4 0.1
ISO method A
9.78 0.25
7.62 ref.
4
6
5
8.6 0.1
1.27 0.05
1 min.
0.1755 0.0735
0.30 typ.
15° max.
3.555 0.255
4° typ.
0.84 typ.
0.84 typ.
0.765 0.255
0.485 0.025
2.54 typ.
17222
Option 7
Option 8
Option 9
Option 6
10.3 max.
7.62 typ.
7.62 typ.
7.62 typ.
7.62 typ.
0.7 min.
0.25 0.1
0.1 0.1
0.6 min.
3.6 0.3
3.5 0.3
3.5 0.3
0.1 min.
4.3 0.3
0.6 min.
9.27 min.
12.1 max.
8 min.
2.55 0.25
10.3 max.
8 min.
10.16 typ.
20802-40
PACKAGE MARKING (example)
BRT12H
V YWW H 68
Notes
•
•
•
Only options 1, and 7 are reflected in the package marking.
The VDE logo is only marked on option 1 parts.
Tape and reel suffix (T) is not part of the package marking.
Rev. 1.6, 02-Dec-11
Document Number: 83689
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
BRT13M-X001
Optocoupler - Trigger Device Output, 1 CHANNEL TRIGGER OUTPUT OPTOCOUPLER, DIP-6
INFINEON
©2020 ICPDF网 联系我们和版权申明