首页 |元器件品牌

CBB0207002200GCT00 [VISHAY]

RESISTOR, CARBON FILM, 0.6 W, 2 %, 220 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;
CBB0207002200GCT00
型号： CBB0207002200GCT00
厂家： VISHAY    VISHAY
描述：

RESISTOR, CARBON FILM, 0.6 W, 2 %, 220 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
文件： 总9页 (文件大小：131K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
CBB 0207  
Vishay Beyschlag  
High Pulse Load Carbon Film Leaded Resistors  
FEATURES  
• Speciality product for EMC sensitive applications  
• Special carbon film technology for maximum  
heat stress capability  
• Up to 6 kV or 140 W pulse load capability  
• Resistance range: 10 Ω to 1.5 MΩ  
• Lead (Pb)-free solder contacts  
CBB 0207 leaded resistors with advanced pulse load  
capability, are the perfect choice for circuitries exposed  
to high levels of electromagnetic interference or electrostatic  
discharge. The resistors can also be used to protect  
the circuitry of signal and mains input lines from surge  
pulses. Applications are in all fields of automotive,  
telecommunication and industrial equipment.  
• Pure tin plating provides compatibility with lead (Pb)-free  
and lead containing soldering processes  
• Compliant to RoHS directive 2002/95/EC  
APPLICATIONS  
• Automotive  
METRIC SIZE  
• Telecommunication  
• Industrial equipment  
DIN  
0207  
B
CECC  
TECHNICAL SPECIFICATIONS  
DESCRIPTION  
CBB 0207  
CECC Size  
B
10 Ω to 1.5 MΩ  
Resistance Range  
Resistance Tolerance  
Temperature Coefficient  
Operation Mode  
2 ꢀ  
Refer to Temperature Coefficient graph  
Long term  
Standard  
55/155/56  
0.6 W  
Climatic Category (LCT/UCT/Days)  
Rated Dissipation, P70  
Operating Voltage, Umax. AC/DC  
Film Temperature  
55/125/56  
0.4 W  
350 V  
125 °C  
155 °C  
Max. Resistance Change at P70  
for Resistance Range,  
ΔR/R max., After:  
10 Ω to 100 kΩ  
1000 h  
8000 h  
1 ꢀ  
2 ꢀ  
+ 3 ꢀ/- 1 ꢀ  
+ 5 ꢀ/- 2 ꢀ  
Permissible Voltage Against Ambient:  
1 Minute; Uins  
500 V  
75 V  
Continuous  
Failure Rate: FITobserved  
≤ 0.1 x 10- 9/h  
Note  
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over  
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.  
www.vishay.com  
242  
For technical questions, contact: filmresistorsleaded@vishay.com  
Document Number: 28736  
Revision: 12-Oct-09  
CBB 0207  
High Pulse Load Carbon Film Leaded Resistors  
Vishay Beyschlag  
DIMENSIONS  
D
L
M
I
I
d
DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions  
Dmax. (mm)  
Lmax. (mm)  
dnom. (mm)  
Imin. (mm)  
Mmin. (mm)  
10.0  
TYPE  
MASS (mg)  
CBB 0207  
2.5  
6.3  
0.6  
28.0  
220  
PART NUMBER AND PRODUCT DESCRIPTION  
PART NUMBER: CBB0207001501GC100  
C
B
B
0
2
0
7
0
0
1
5
0
1
G
C
1
P
0
PACKAGING (1)  
MODEL/SIZE  
VARIANT  
TCR  
VALUE  
TOLERANCE  
SPECIAL  
CBB0207  
0 = Neutral  
0 = Standard  
See TCR graph  
3 digit value  
1 digit multiplier  
MULTIPLIER  
G = 2 ꢀ  
CT  
C1  
Up to 2 digits  
00 = Standard  
7 = *10- 3 2 = *102  
8 = *10- 2 3 = *103  
9 = *10- 1 4 = *104  
0 = *100 5 = *105  
1 = *101 6 = *106  
PRODUCT DESCRIPTION: CBB 0207 2 % C1 1K5  
CBB  
0207  
2 %  
C1  
1K5  
PACKAGING (1)  
MODEL  
SIZE  
TOLERANCE  
RESISTANCE VALUE  
CBB  
0207  
2 %  
CT  
C1  
47K = 47 kΩ  
51R1 = 51.1 Ω  
Notes  
(1) Please refer to table PACKAGING  
• The PART NUMBER is shown to facilitate the introduction of the unified part numbering system for ordering products  
PACKAGING  
BOX  
MODEL  
PIECES/BOX  
CODE  
1000  
5000  
C1  
CT  
CBB 0207  
TOLERANCE AND RESISTANCE RANGE  
RESISTANCE VALUE (1)  
CBB 0207  
TOLERANCE  
2 ꢀ  
10 Ω to 1.5 MΩ  
Note  
(1) Resistance values to be selected from E24 series  
Document Number: 28736  
Revision: 12-Oct-09  
For technical questions, contact: filmresistorsleaded@vishay.com  
www.vishay.com  
243  
CBB 0207  
High Pulse Load Carbon Film Leaded Resistors  
Vishay Beyschlag  
DESCRIPTION  
Production is strictly controlled and follows an extensive  
set of instructions established for reproducibility.  
suitability of conformal coatings, if applied, shall be qualified  
by appropriate means to ensure the long-term stability of the  
whole system. The resistors are completely lead (Pb)-free,  
the pure tin plating provides compatibility with lead (Pb)-free  
and lead-containing soldering processes. The immunity of  
the plating against tin whisker growth has been proven under  
A
homogeneous and dense carbon film is deposited on a high  
grade ceramic body (85 ꢀ Al2O3) and conditioned to achieve  
the desired temperature coefficient. Nickel plated steel  
termination caps are firmly pressed on the rods. A special  
laser is used to achieve the target value by smoothly cutting  
a helical groove in the resistive layer without damaging the  
ceramics. Connecting wires of electrolytic copper plated with  
100ꢀ pure tin are welded to the termination caps. The  
resistors are covered by protective coating designed for  
electrical, mechanical and climatic protection. The  
terminations receive a final pure tin on nickel plating. Five  
colour code rings designate the resistance value and  
tolerance in accordance with IEC 60062.  
extensive testing. All products comply with GADSL (1) and  
(2)  
the CEFIC-EECA-EICTA  
list of legal restrictions on  
hazardous substances. This includes full compliance with  
the following directives:  
• 2000/53/EC End of Vehicle Life Directive (ELV) and  
Annex II (ELVII)  
• 2002/95/EC Restriction of the use of Hazardous  
Substances Directive (RoHS)  
• 2002/96/EC Waste Electrical and Electrical Equipment  
Directive (WEEE)  
The result of the determined production is verified by an  
extensive testing procedure performed on 100 ꢀ of the  
individual resistors. Only accepted products are stuck  
directly on the adhesive tapes in accordance with  
IEC 60286-1.  
APPROVALS  
Where applicable, the resistors are tested in accordance with  
CECC 40101-806 which refers to EN 60115-1 and  
EN 140100.  
ASSEMBLY  
The resistors are suitable for processing on automatic  
insertion equipment and cutting and bending machines.  
Excellent solderability is proven, even after extended  
storage. They are suitable for automatic soldering using  
wave or dipping. The encapsulation is resistant to all  
cleaning solvents commonly used in the electronics industry,  
including alcohols, esters and aqueous solutions. The  
Vishay BEYSCHLAG has achieved “Approval of  
Manufacturer” in accordance with IEC QC 001002-3,  
clause 2. The release certificate for “Technology Approval  
Schedule” in accordance with CECC 240001 based on  
IEC QC 001002-3, clause 6 is granted for the Vishay  
BEYSCHLAG manufacturing process.  
Notes  
(1)  
Global Automotive Declarable Substance List, see www.gadsl.org  
(2)  
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European  
trade organisation representing the information and communications technology and consumer electronics), see  
www.eicta.org/index.php?id=1053&id_article=340  
FUNCTIONAL DESCRIPTION  
P
1
CBB 0207  
W
0.5  
0
- 50  
0
50  
70  
100  
150  
C
Ambient Temperatureϑamb  
Derating - Standard Operation  
www.vishay.com  
244  
For technical questions, contact: filmresistorsleaded@vishay.com  
Document Number: 28736  
Revision: 12-Oct-09  
CBB 0207  
High Pulse Load Carbon Film Leaded Resistors  
Vishay Beyschlag  
P
1
CBB 0207  
W
0.5  
0
- 50  
0
50  
70  
100  
C
150  
Ambient Temperatureϑamb  
Derating - Long Term Operating  
T
CBB 0207  
80  
K
60  
40  
20  
0
0.9  
0
0.3  
0.4  
0.5  
0.6  
0.8  
1
0.2  
0.7  
1.1W 1.2  
0.1  
P
Load  
Temperature Rise  
P
CBB 0207  
100  
W
10  
1
0.1  
10 µs  
100 μµs  
1 ms  
10 ms  
100 ms  
1 s  
10 s  
Pulse Duration t  
i
Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation.  
Single Pulse  
Document Number: 28736  
Revision: 12-Oct-09  
For technical questions, contact: filmresistorsleaded@vishay.com  
www.vishay.com  
245  
CBB 0207  
High Pulse Load Carbon Film Leaded Resistors  
Vishay Beyschlag  
P
CBB 0207  
100  
W
10  
1
0.1  
10 µs  
100 µs  
1 ms  
10 ms  
100 ms  
1 s  
10 s  
Pulse Duration t  
i
Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation.  
Continuous Pulse  
U
CBB 0207  
1 kV  
100 V  
10 µs  
100 µs  
1 ms  
10 ms  
100 ms  
1 s  
10 s  
Pulse Duration  
t
i
Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation.  
Pulse Voltage  
10 kV  
1 kV  
100 V  
CBB 0207  
10 V  
10 Ω  
100 Ω  
1 kΩ  
10 kΩ  
100 kΩ  
1 MΩ  
10 MΩ  
Resistance Value  
R
Pulse load rating in accordance with IEC 60115-1, 4.27; 1.2 µs/50 µs; 5 pulses at 12 s intervals;  
for permissible resistance change 0.5 ꢀ.  
1.2/50 Pulse  
www.vishay.com  
246  
For technical questions, contact: filmresistorsleaded@vishay.com  
Document Number: 28736  
Revision: 12-Oct-09  
CBB 0207  
High Pulse Load Carbon Film Leaded Resistors  
Vishay Beyschlag  
10 kV  
1 kV  
100 V  
10 V  
CBB 0207  
10 Ω  
100 Ω  
1 kΩ  
10 kΩ  
100 kΩ  
1 MΩ  
10 MΩ  
Resistance Value R  
Pulse load rating in accordance with IEC 60115-1, 4.27; 10 µs/ 700 µs; 10 pulses at 1 minute intervals;  
for permissible resistance change 0.5 ꢀ.  
10/700 Pulse  
CBB 0207  
- 100  
ppm/K  
- 200  
- 300  
- 400  
- 500  
10 Ω  
100 Ω  
1 kΩ  
10 kΩ  
100 kΩ  
1 MΩ  
10 MΩ  
Resistance Value  
R
Temperature Coefficient (TCR)  
A
1
µV/V  
0.1  
CBB 0207  
0.01  
1 kΩ  
10 kΩ  
100 kΩ  
1 MΩ  
10 MΩ  
Resistance Value R  
Current Noise - A1 in accordance with IEC 60195  
Document Number: 28736  
Revision: 12-Oct-09  
For technical questions, contact: filmresistorsleaded@vishay.com  
www.vishay.com  
247  
CBB 0207  
High Pulse Load Carbon Film Leaded Resistors  
Vishay Beyschlag  
TESTS AND REQUIREMENTS  
Essentially all tests are carried out in accordance with the  
following specifications:  
Category Temperature; damp heat, long term, 56 days) is  
valid.  
EN 60115-1, generic specification (includes tests)  
Unless otherwise specified the following values apply:  
Temperature: 15 °C to 35 °C  
Relative humidity: 45 ꢀ to 75 ꢀ  
EN 140100, sectional specification (includes schedule for  
qualification approval)  
CECC 40101-806, detail specification (includes schedule for  
conformance inspection)  
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).  
The following table contains the applicable tests selected  
from the documents listed above.  
For testing the components are mounted on a test board in  
accordance with IEC 60115-1, 4.31 unless otherwise  
specified.  
The tests are carried out in accordance with IEC 60068-2-xx  
test method and under standard atmospheric conditions in  
accordance with  
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated  
temperature range: Lower Category Temperature, Upper  
In the Test Procedures and Requirements table only the  
tests and requirements are listed with reference to the  
relevant clauses of IEC 60115-1 and IEC 60068-2-xx test  
methods. A short description of the test procedure is also  
given.  
TEST PROCEDURES AND REQUIREMENTS  
IEC  
60068-2-xx  
TEST  
METHOD  
IEC  
60115-1  
CLAUSE  
REQUIREMENTS  
PERMISSIBLE CHANGE (ΔR)  
TEST  
PROCEDURE  
Stability for product types:  
CBB 0207  
10 Ω to 1.5 MΩ  
4.5  
4.8  
-
-
Resistance  
2 ꢀ  
Temperature  
coefficient  
At (20/LCT/20) °C and  
(20/UCT/20) °C  
-
U = P70 x R or  
U = Umax.  
1.5 h ON; 0.5 h OFF  
;
Endurance at  
70 °C: standard  
operation mode  
4.25.1  
4.25.1  
-
-
70 °C; 1000 h  
(2 ꢀ R + 0.05 Ω)  
(4 ꢀ R + 0.05 Ω)  
70 °C; 8000 h  
U = P70 x R or  
Endurance  
at 70 °C:  
long term  
U = Umax.  
;
1.5 h ON; 0.5 h OFF  
70 °C; 1000 h  
(1 ꢀ R + 0.05 Ω)  
(2 ꢀ R + 0.05 Ω)  
operation mode  
70 °C; 8000 h  
Endurance at  
upper category  
temperature  
125 °C; 1000 h  
155 °C; 1000 h  
(2 ꢀ R + 0.05 Ω)  
(4 ꢀ R + 0.1 Ω)  
4.25.3  
4.24  
-
Damp heat,  
steady state  
(40 2) °C; 56 days;  
(93 3) ꢀ RH  
78 (Cab)  
(1 ꢀ R + 0.1 Ω)  
Climatic  
sequence:  
4.23  
4.23.2  
2 (Ba)  
Dry heat  
155 °C; 16 h  
55 °C; 24 h;  
90 ꢀ to 100 ꢀ RH;  
1 cycle  
Damp heat,  
cyclic  
4.23.3  
30 (Db)  
4.23.4  
4.23.5  
1 (Aa)  
13 (M)  
Cold  
- 55 °C; 2 h  
Low air pressure  
8.5 kPa; 2 h; 15 °C to 35 °C  
55 °C; 5 days;  
95 ꢀ to 100 ꢀ RH;  
5 cycles  
Damp heat,  
cyclic  
(1 ꢀ R + 0.1 Ω)  
no visible damage  
4.23.6  
-
30 (Db)  
1 (Aa)  
Cold  
- 55 °C; 2 h  
(0.5 ꢀ R + 0.1 Ω)  
www.vishay.com  
248  
For technical questions, contact: filmresistorsleaded@vishay.com  
Document Number: 28736  
Revision: 12-Oct-09  
CBB 0207  
High Pulse Load Carbon Film Leaded Resistors  
Vishay Beyschlag  
TEST PROCEDURES AND REQUIREMENTS  
IEC  
60068-2-xx  
TEST  
IEC  
60115-1  
CLAUSE  
REQUIREMENTS  
PERMISSIBLE CHANGE (ΔR)  
TEST  
PROCEDURE  
METHOD  
Stability for product types:  
CBB 0207  
10 Ω to 1.5 MΩ  
Room temperature;  
U = 2.5 x P70 x R or  
U = 2 x Umax.; 5 s  
Short time  
overload  
(0.5 ꢀ R + 0.1 Ω)  
no visible damage  
4.13  
4.19  
-
30 min at LCT = - 55 °C and  
30 min at UCT = 155 °C;  
200 cycles  
Rapid change of  
temperature  
(0.5 ꢀ R + 0.05 Ω)  
no visible damage  
14 (Na)  
Component  
solvent resistance  
Isopropyl alcohol + 23 °C;  
toothbrush method  
marking legible;  
no visible damage  
4.29  
45 (XA)  
20 (Tb)  
Resistance to  
soldering heat  
Unmounted components;  
(260 3) °C; (10 1) s  
(0.5 ꢀ R + 0.05 Ω)  
no visible damage  
4.18.2  
+ 235 °C; 2 s  
solder bath method  
SnPb40  
Good tinning (≥ 95 ꢀ covered,  
4.17  
4.22  
20 (Ta)  
Solderability  
no visible damage)  
+ 245 °C; 3 s  
solder bath method  
SnAg3Cu0.5  
6 h;  
6 (B4)  
Vibration  
10 Hz to 2000 Hz  
1.5 mm or 196 m/s2  
(0.5 ꢀ R + 0.05 Ω)  
21 (Ua1)  
21 (Ub)  
21 (Uc)  
Robustness of  
terminations  
4.16  
4.7  
Tensil, bending and torsion  
(0.5 ꢀ R + 0.05 Ω)  
-
Voltage proof  
URMS = Uins; 60 s  
No flashover or breakdown  
Electrostatic  
discharge  
(human body  
model)  
IEC 61340-3-1;  
3 pos. + 3 neg.  
16 kV  
4.40  
-
(0.5 ꢀ R + 0.05 Ω)  
12NC INFORMATION FOR HISTORICAL CODING REFERENCE  
• The resistors have a 12-digit numeric code starting with  
Last Digit of 12NC Indicating Resistance Decade  
2312.  
RESISTANCE DECADE  
LAST DIGIT  
10 Ω to 99.9 Ω  
100 Ω to 999 Ω  
1 kΩ to 9.99 kΩ  
10 kΩ to 99.9 kΩ  
100 kΩ to 999 kΩ  
1 MΩ to 9.99 MΩ  
9
1
2
3
4
5
• The subsequent 4 digits indicate the resistor type,  
specification and packaging; see the 12NC table.  
• The remaining 4 digits indicate the resistance value:  
– The first 3 digits indicate the resistance value.  
– The last digit indicates the resistance decade in  
accordance with the 12NC Indicating Resistance  
Decade table.  
12NC Example  
The 12NC of a CBB 0207 resistor, value 47 kΩ with 2 ꢀ  
tolerance, supplied on bandolier in a box of 5000 units is:  
2312 955 24703.  
12NC - Resistor types and packaging  
2312 ... .....  
DESCRIPTION  
BANDOLIER IN BOX  
TYPE  
TOL.  
2 ꢀ  
C1 1000 units  
950 2....  
CT 5000 units  
CBB 0207  
955 2....  
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.  
Document Number: 28736  
Revision: 12-Oct-09  
For technical questions, contact: filmresistorsleaded@vishay.com  
www.vishay.com  
249  
Legal Disclaimer Notice  
Vishay  
Disclaimer  
All product specifications and data are subject to change without notice.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf  
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein  
or in any other disclosure relating to any product.  
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any  
information provided herein to the maximum extent permitted by law. The product specifications do not expand or  
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed  
therein, which apply to these products.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this  
document or by any conduct of Vishay.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless  
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such  
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting  
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding  
products designed for such applications.  
Product names and markings noted herein may be trademarks of their respective owners.  
Document Number: 91000  
Revision: 18-Jul-08  
www.vishay.com  
1

相关型号：

CBB0207002201GC100

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 2200 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207002700GC100

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 270 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207002702GCT00

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 27000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207002709GCT00

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 27 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207003001GC100

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 3000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207003002GCT00

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 30000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207003003GC100

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 300000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207003300GCT00

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 330 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207003303GC100

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 330000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207003309GC100

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 33 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207003603GC100

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 360000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY

CBB0207003900GCT00

 RESISTOR, CARBON FILM, 0.6 W, 2 %, 390 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明