CCF0263R4FKE36 [VISHAY]
RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 63.4 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT;型号: | CCF0263R4FKE36 |
厂家: | VISHAY |
描述: | RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 63.4 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT 电阻器 |
文件: | 总3页 (文件大小:155K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CCF02 (CCF-2)
Vishay Dale
Metal Film Resistors, Industrial Power, Flameproof
FEATURES
• Small size suitable for 1/2 W, 1 W and 2 W
applications
• High power rating, small size
• Flameproof, high temperature coating meets
EIA RS-325-A
• Excellent high frequency characteristics
• Low noise
• Low voltage coefficient
• Tape and reel packaging for automatic
insertion (52.4 mm inside tape spacing per
EIA-296-E)
• Halogen-free according to IEC 61249-2-21 definition
• Compliant to RoHS directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
POWER
RATING
P70 °C
W
MAXIMUM
WORKING
VOLTAGE (1)
V
TEMPERATURE
COEFFICIENT
ppmꢀ°C
RESISTANCE
RANGE
Ω
GLOBAL HISTORICAL
TOLERANCE
ppmꢀ°C
E-SERIES
MODEL
MODEL
96 for 1 % tolerance
24 for 5 % tolerance
CCF02
CCF-2
2.0
350
100
1, 5
4.99 to 1M
Note
(1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less.
TECHNICAL SPECIFICATIONS
MATERIAL SPECIFICATIONS
PARAMETER
UNIT
CCF02
2.0
Element
Solderability
Core
Proprietary nickel-chrome film
Rated Dissipation at 70 °C
Maximum Working Voltage
Insulation Voltage (1 Min)
Dielectric Strength
W
Satisfactory per MIL-STD-202, Method 208.
Fire-cleaned high purity ceramic
V
≤ 350
> 500
900
Veff
VAC
Ω
Standard lead material is solder-coated
copper. Solderable and weldable per
MIL-STD-1276, Type C.
Termination
Insulation Resistance
Operating Temperature Range
Terminal Strength (Pull Test)
Failure Rate
≥ 1011
- 65/+ 230
2
°C
MARKING
lb
- 5 band colorband for 1 %
- 4 band colorband for 5 %
10-9/h
g
< 1
Weight (Max.)
0.35
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CCF02301RFKR36 (preferred part numbering format)
C
C
F
0
2
3
0
1
R
F
K
R
3
6
TEMPERATURE
COEFFICIENT
TOLERANCE
GLOBAL MODEL
RESISTANCE VALUE
PACKAGING
SPECIAL
CODE
F = 1 %
J = 5 %
K = 100 ppm
E36 = Lead (Pb)-free,
T/R (2500 pieces)
R36 = Tin/Lead,
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
R = Ω
CCF02
K = kΩ
MΩ
M =
4R99 = 4.99 Ω
680K = 680 kΩ
1M00 = 1.0 MΩ
T/R (2500 pieces)
Historical Part Number example: CCF-23010F (will continue to be accepted)
CCF-2
3010
F
R36
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
96
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31012
Revision: 16-Feb-10
CCF02 (CCF-2)
Metal Film Resistors, Industrial Power, Flameproof
Vishay Dale
DIMENSIONS in inches (millimeters)
0.344 0.031
(8.74 0.79)
1.030 0.130
(26.16 3.30)
0.032 0.002
(0.81 0.05)
0.425
(10.80)
Max.
0.145 0.015
(3.68 0.38)
120
100
80
60
40
20
0
Surface temperatures
were taken with an
infrared pyrometer
in + 25 °C still air.
250
200
150
Resistors were
supported by their
leads in test clips at a
point 0.5" (12.70 mm)
out from the resistor
body ends.
100
50
0
1
2
3
4
5
APPLIED POWER (W)
- 65 - 50 - 25
0
25
50 75 100 125 150 175 200 225 250
AMBIENT TEMPERATURE IN °C
70
DERATING
THERMAL RESISTANCE
PERFORMANCE
TEST
MAX. ΔR (TYPICAL TEST LOTS)
1.0 %
0.5 %
0.5 %
1.5 %
0.5 %
0.5 %
0.5 %
0.5 %
0.5 %
2.0 %
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Terminal Strength
Dielectric Withstanding Voltage
Life
Document Number: 31012
Revision: 16-Feb-10
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
97
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号:
CCF02649KFKE36
RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 649000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
CCF02649RFKE36
RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 649 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
CCF0264R9FKE36
RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 64.9 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
CCF02665KFKE36
RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 665000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
CCF02665RFKE36
RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 665 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
CCF0266K5FKE36
RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 66500 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
CCF0266R5FKE36
RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 66.5 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明