CHPHT0603K4993FGTA [VISHAY]
RES SMD 499K OHM 1% 0.0125W 0603;
| 型号： | CHPHT0603K4993FGTA |
| 厂家： | 
VISHAY |
| 描述： | RES SMD 499K OHM 1% 0.0125W 0603 |
| 文件： | 总6页 (文件大小：108K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CHPHT
Vishay Sfernice
www.vishay.com
High Temperature (245 °C) Thick Film Chip Resistor
FEATURES
• High temperature (245 °C)
• Large ohmic value range 0.1 to 100 M
Available
• Operating temperature range
(-55 °C to +230 °C)
• SMD wraparound chip resistor
• Storage temperature range
(-55 °C to +245 °C)
click logo to get started
DESIGN SUPPORT TOOLS
Models
• Gold terminations for HMP process (< 1 μm thick) for
temperature up to 245 °C
• Tin / silver terminations for operating temperature up to
200 °C
Available
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
For applications such as down hole applications or aircraft breaking systems, the need for parts able to withstand very severe
conditions (temperature as high as 230 °C powered or up to 245 °C un-powered) has leaded Vishay Sfernice to push out the
limit of the thick film technology. Designers might read the application note “Power Dissipation Considerations in High Precision
Vishay Sfernice Thin Film Chips Resistors and Arrays (P, PRA etc.) (High Temperature Applications)”
(www.vishay.com/doc?53047) in conjunction with this data sheet to help them to properly design their PCBs and get the best
performances of the CHPHT. Vishay Sfernice R&D engineers will be willing to support any customer design considerations.
DIMENSIONS in millimeters
D
E
C
B
A
A
B
C
D
E
CASE SIZE
0.152
1.60
1.85
3.00
5.03
0.127
0.90
1.25
1.73
2.64
0.127
0.38
0.38
0.38
0.50
0.127
0.31
0.31
0.40
0.50
0.127
0.40
0.50
0.50
0.50
0603
0805
1206
2010
SUGGESTED LAND PATTERN (to IPC-7351A)
Gmin.
Xmax.
Zmax.
CASE SIZE
0603
Zmax.
2.15
2.70
3.85
5.88
Gmin.
0.39
0.44
1.59
3.62
Xmax.
1.03
1.38
1.85
2.77
0805
1206
2010
Revision: 24-Jan-18
Document Number: 52032
1
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHPHT
Vishay Sfernice
www.vishay.com
STANDARD ELECTRICAL SPECIFICATIONS
RATED
LIMITING
ELEMENT
VOLTAGE
V
MAX.
OVERLOAD
VOLTAGE
V
RESISTANCE
RANGE
POWER
Pn
TEMPERATURE
COEFFICIENT
ppmꢁ°C
TOLERANCE
MODEL
SIZE
ꢀ
W
(at 230 °C)
CHPHT
CHPHT
CHPHT
CHPHT
0603
0805
1206
2010
0.1 to 25M
0.1 to 25M
0.1 to 50M
0.1 to 100M
0.0125
0.02
50
100
300
400
400
1, 2, 5
1, 2, 5
1, 2, 5
1, 2, 5
100, 200
100, 200
100, 200
100, 200
150
200
200
0.025
0.1
PACKAGING
CLIMATIC SPECIFICATIONS
ESD packaging available: Waffle pack and plastic tape and
reel (low conductivity). Paper tapes available on request
(ESD only). (For 0603, 0805, and 1206 only.)
Operating temperature range
-55 °C to +230 °C
Storage temperature range
-55 °C to +245 °C
NUMBER OF PIECESPER PACKAGE
TAPE
MECHANICAL SPECIFICATIONS
Substrate
Alumina
SIZE
TAPE AND REEL
WAFFLE
PACK
WIDTH
Technology
Thick film (Ruthenium oxyde)
MIN.
MAX.
0.5 < R < 100 M:
double organic coating
R 0.5 : overglaze protection
(no organic coating)
0603
0805
1206
2010
5000
Protection
100
100
4000
2000
8 mm
N (WꢁA): SnAg over nickel
barrier for temperature
up to 200 °C
140
60
Terminations
G (WꢁA) type: Gold (< 1 μm) over
nickel barrier for temperature
up to 245 °C
PACKAGING RULES
Note
Waffle Pack
•
Refer to Application Note “Guidelines for Vishay Sfernice
Resistive and Inductive Components” (document number:
52029) for recommended reflow profile. Profile #3 applies
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code
BEST TOL. AND TCR VERSUS OHMIC VALUE
TIGHTEST
TOLERANCE
OHMIC
VALUES
BEST TCR
ppmꢁ°C
1 % (F)
2 % (G)
5 % (J)
5 < R < 10M
1 < R < R max.
0.1 < R < R max.
100 (K)
200 (L)
200 (L)
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code
POWER DERATING CURVE
1200
1000
800
600
400
200
0
0
50
100
150
200
250
300
Ambient Temperature in °C
Revision: 24-Jan-18
Document Number: 52032
2
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHPHT
Vishay Sfernice
www.vishay.com
POPULAR OPTIONS
For any option it is recommended to consult Vishay Sfernice for availability first.
Option: Enlarged terminations:
For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint
can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heat
sinks (see application note: “Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA
Arrays, CHP Thick Film” (www.vishay.com/doc?53048).
Option to order: 0063 (applies to size 1206/2010).
DIMENSIONS (Option 0063) in millimeters
Bottom view for mounting
Uncoated
ceramic
A
Enlarged
termination
B
F
D
E
A
B
E
D
MAX. TOL.
+0.152
MIN. TOL.
-0.152
MAX. TOL.
+0.127
MIN. TOL.
-0.127
MAX. TOL.
+0.13
MIN. TOL.
-0.13
MAX. TOL.
+0.13
MIN. TOL.
-0.13
F
CASE
SIZE
NOMINAL
3.06 (0.120)
5.08 (0.200)
NOMINAL
1.60 (0.063)
2.54 (0.100)
NOMINAL
0.40 (0.016)
0.48 (0.019)
NOMINAL
1.22 (0.048)
2.23 (0.088)
NOMINAL
0.63 (0.024)
0.63 (0.024)
MIN.
MAX.
1206
2010
0.50 (0.020)
0.50 (0.020)
0.76 (0.030)
0.76 (0.030)
SUGGESTED LAND PATTERN (Option 0063)
Gmin.
Xmax.
Zmax.
DIMENSIONS (in millimeters)
Gmin.
CHIP SIZE
Zmax.
Xmax.
1206
2010
3.91 (0.154)
5.93 (0.233)
0.50 (0.020)
1.73 (0.068)
2.67 (0.105)
0.50 (0.020)
Revision: 24-Jan-18
Document Number: 52032
3
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHPHT
Vishay Sfernice
www.vishay.com
PERFORMANCE
TYPICAL VALUES
AND DRIFTS
TESTS
CONDITIONS
REQUIREMENTS
Termination adhesion
5N for 10 s
(0.25 % + 0.05 )
<
0.1 %
Immersion 10 s
in Sn/Pb 60/40
at +260 °C
Resistance to solder heat
Rapid temperature change
(0.25 % + 0.05 )
(0.25 % + 0.05 )
<
0.1 %
5 cycles
-55 °C to +155 °C
<
0.1 %
Phase A dry heat
Phase B damp heat
Phase C cold -55 °C
Climatic sequence
(1 % + 0.05 )
<
<
0.2 %
0.2 %
Phase D damp heat 5 cycles
Humidity (steady state)
Moisture resistance
56 days
(1 % + 0.05 )
3 % + 0.05
AEC-Q200
85 °C / 85 % RH / Pn
1000 h
Max. < 3 % + 0.05
6.25 Pn
for 2 s
Short time overload
(0.25 % + 0.05 )
<
0.1 %
1000 h at rated power
at 230 °C
Load life
Shelf life
-
-
1 % max.
1 % max.
1000 h at 245 °C
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: CHPHT0805K1001FGT
C
H
P
H
T
0
8
0
5
K
1
0
0
1
F
G
T
GLOBAL
MODEL
SIZE
TCR
VALUE
TOLERANCE
TERMINATION (1)
N: SnAg over nickel barrier
PACKAGING
For more
OPTION
CHPHT
0603
0805
1206
2010
K = 100 ppm
L = 200 ppm
The first 3 digits
are significant
figures and the
last digit specifies
the number of
zeros to follow.
R designates
F = 1 %
G = 2 %
J = 5 %
Leave blank
G: gold over nickel barrier information see if no option
“Codificationof
packaging”
table
decimal point
10R0 = 10
3901 = 3900
1004 = 1 M
Note
(1)
N terminations for temperature up to 200 °C
G terminations for temperature up to 230 °C
Revision: 24-Jan-18
Document Number: 52032
4
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHPHT
Vishay Sfernice
www.vishay.com
CODIFICATION OF PACKAGING
WAFFLE PACK
W
100 min., 1 mult
WA
100 min., 100 mult (available only in size 1206)
PLASTIC TAPE (Standard for all sizes)
T
100 min., 1 mult
100 min., 100 mult
TA
TB
TC
TD
TE
TF
250 min., 250 mult
500 min., 500 mult
1000 min., 1000 mult
2500min., 2500 mult
Full tape (quantity depending on size of chips)
PAPER TAPE (Available for 0603, 0805, and 1206. Please consult Vishay Sfernice for other sizes)
PT
PA
PB
PC
PD
PE
PF
100 min., 1 mult
100 min., 100 mult
250 min., 250 mult
500 min., 500 mult
1000 min., 1000 mult
2500min., 2500 mult
Full tape (quantity depending on size of chips)
CODIFICATION OF OPTIONS ON TWO DIGITS
CODIFICATION OF SIZES
OPTION 2
DIGITS
OPTION 2
DIGITS
CODE 18
CODE 40
02016
0302
0402
0502
0505
0603
0805
1005
1010
1020
1206
1505
2010
2208
2512
CODE 18
CODE 40
22
OPTION
OPTION
7
8
9
A
B
C
D
E
F
G
H
I
M
N
O
P
Q
R
S
T
..
..
0126
0127
0128
..
1A
1B
1C
..
33
0099
0100
0101
0102
0103
0104
0105
..
99
0A
0B
0C
0D
0E
0F
..
44
55
515
48
0320
0321
0322
0323
0324
0325
..
8M
8N
8O
8P
8Q
8R
..
408
816
914
073
074
100
135
182
U
V
0124
0125
0Y
0Z
W
X
J
Y
Z
K
L
Revision: 24-Jan-18
Document Number: 52032
5
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
CHPHT0805K1004FG
Fixed Resistor, Metal Glaze/thick Film, 0.02W, 1000000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明