CMF600R1100GNEA [VISHAY]
RESISTOR, METAL FILM, 1 W, 2 %, 200 ppm, 0.11 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;型号: | CMF600R1100GNEA |
厂家: | VISHAY |
描述: | RESISTOR, METAL FILM, 1 W, 2 %, 200 ppm, 0.11 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT |
文件: | 总5页 (文件大小:171K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CMF Industrial
Vishay Dale
Metal Film Resistors, Industrial, Precision
FEATURES
• Small size - conformal coated
• Flame retardant epoxy coating
• Controlled temperature coefficient
• Excellent high frequency characteristics
• Exceptionally low noise; typically 0.10 µV/V
• Low voltage coefficient to 5 ppm/V
• Compliant to RoHS directive 2002/95/EC
• Special tolerance and or TC matching available
on request
Vishay Dale Model CMF is also available as Military Qualified Styles RN and RL. See appropriate catalog or web page for the
MIL-SPEC ratings/attributes. (Except for marking, the Industrial and Military versions are exactly the same. Depending upon
stock, military marked parts may be supplied as industrial rated parts).
STANDARD ELECTRICAL SPECIFICATIONS
MAXIMUM
RESISTANCE RANGE
1 % 2 %, 5 %
50 ppm/°C 50 ppm/°C 100 ppm/°C 100 ppm/°C 150 ppm/°C 150 ppm/°C 200 ppm/°C 200 ppm/°C
Ω
GLOBAL HISTORICAL WORKING
0.1 % to 1 % 0.1 % to 0.5 % 1 % to 5 %
1 %
2 %, 5 %
1 %
2 %, 5 %
MODEL
MODEL
VOLTAGE (1)
V
25 ppm/°C
10 to 2.5M
10 to 2.5M
10 to 2.5M
10 to 2.5M
10 to 2.5M
-
CMF50
CMF55
CMF60
CMF65
CMF70
CMF07
CMF20
CMF-50
CMF-55
CMF-60
CMF-65
CMF-70
CMF-07
CMF-20
200
250
500
500
500
250
500
10 to 2.5M
10 to 2.5M
10 to 2.5M
10 to 2.5M
10 to 2.5M
-
10 to 2.5M 10 to 2.5M 10 to 2.5M 10 to 22M
10 to 22M
10 to 22M
10 to 22M
10 to 5M 1 to 22.1M 1 to 22.1M 0.5 to 50M 0.5 to 50M 0.5 to 50M 0.1 to 50M
10 to 10M
1 to 10M
1 to 10M
1 to 15M
1 to 15M
5 to 5M
0.5 to 10M 0.5 to 10M 0.5 to 10M 0.1 to 10M
0.5 to 22M 0.5 to 22M 0.5 to 22M 0.1 to 22M
10 to 10M
1 to 15M
10 to 10M
1 to 15M
1 to 22M
1 to 22M
1 to 5M
1 to 22M
1 to 22M
1 to 5M
-
-
-
-
-
-
-
-
-
-
5 to 10M
1 to 10M
1 to 10M
Note
(1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less
MAXIMUM COMMERCIAL POWER RATING
MODEL
WATTAGE (2)
CMF50
0.25 W
0.125 W
CMF55
0.5 W
CMF60
1 W
CMF65
1 W
CMF70
1 W
CMF07
CMF20
At + 70 °C
0.5 W
-
1 W
-
At + 125 °C
0.25 W
0.5 W
0.75 W
0.75 W
Note
(2) See the load life shift due to power and derating table for a summary of the more common combinations of power rating, case size and ambient
operating temperature that prevail in various industrial and military resistor specifications. The “performance” table qualifies the load life
stability under these combinations.
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CMF55301R00FKRE (preferred part numbering format)
C
M
F
5
5
3
0
1
R
0
0
F
K
R
E
TEMPERATURE
COEFFICIENT (3)
E = 25 ppm
GLOBAL MODEL RESISTANCE VALUE
TOLERANCE
PACKAGING
SPECIAL
CODE
(See Standard
Electrical
R = Ω
K = kΩ
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1 %
G = 2 %
J = 5 %
EK = Lead (Pb)-free, bulk
EA = Lead (Pb)-free, T/R (full)
EB = Lead (Pb)-free,
Blank = Standard
(Dash Number)
(Up to 3 digits)
From 1 to 999
as applicable
70 = Color banded,
5 bands (≤ 1 %)
80 = Color banded,
4 bands (≥ 2 %)
H = 50 ppm
Specifications
table)
M = MΩ
K = 100 ppm
L = 150 ppm
N = 200 ppm
T/R (1000 pieces)
BF = Tin/lead, bulk
RE = Tin/lead, T/R (full)
R10000 = 0.1 Ω
680K00 = 680 kΩ
1M0000 = 1.0 MΩ
R6 = Tin/lead, T/R (1000 pieces)
Historical Part Number example: CMF-553010FT-1 (will continue to be accepted)
CMF-55
3010
F
T-1
R36
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
TEMP. COEFFICIENT
PACKAGING
Note
(3) Tolerances of 0.5 ꢀ (D), 0.25 ꢀ (C) and 0.1 ꢀ (B) are available only in 50 ppm and 25 ppm temperature coefficients
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
18
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31018
Revision: 20-Jul-10
CMF Industrial
Metal Film Resistors, Industrial, Precision
Vishay Dale
DIMENSIONS in inches (millimeters)
1.500 0.125 (1)
[38.10 3.18ꢀ
A
C
(Max.)
D
B
C
GLOBAL MODEL
CMF50
A
B
D
(Max.)
0.150 0.020
(3.81 0.51)
0.065 0.015
(1.65 0.38)
0.016 0.002
(0.41 0.05)
0.187 (4.75)
0.278 (7.06) (3)
0.425 (10.80)
0.687 (17.45)
0.687 (17.45)
0.278 (7.06)
0.240 0.020 (4)
(6.10 0.51)
0.090 0.008
(2.29 0.20)
0.025 0.002
(0.64 0.05)
CMF55
0.344 0.031
(8.74 0.79)
0.145 0.015
(3.68 0.38)
0.025 0.002 (2)
(0.64 0.05)
CMF60
0.562 0.031
(14.27 0.79)
0.180 0.015
(4.57 0.38)
0.025 0.002
(0.64 0.05)
CMF65
0.562 0.031
(14.27 0.79)
0.180 0.015
(4.57 0.38)
0.032 0.002
(0.81 0.05)
CMF70
0.240 0.020
(6.10 0.51)
0.090 0.008
(2.29 0.20)
0.025 0.002
(0.64 0.05)
CMF07
0.375 0.040
(9.53 1.02)
0.145 0.015
(3.68 0.38)
0.032 0.002
(0.81 0.05)
CMF20
0.425 (10.80)
Notes
(1) 1.08" 0.125" (27.43 mm 3.18 mm) if tape and reel
(2) Available with 0.032" (0.813 mm) lead [CMF60..95]
(3) 0.290" (7.37 mm) for 0.25 ꢀ and 0.1 ꢀ resistance tolerances and values > 1 MΩ
(4) 0.260" 0.020" (6.60 mm 0.51 mm) for values > 5 MΩ
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CMF50
CMF55
CMF07
CMF60
≤ 500
> 500
5 (measured between 10 ꢀ and full rated voltage)
CMF20
CMF65
CMF70
Maximum Working Voltage
Insulation Voltage (1 Min)
Voltage Coefficient (Max.)
Dielectric Strength
V≅
≤ 200
≤ 250
≤ 250
≤ 500
≤ 500
≤ 500
Veff
ppm/V
VAC
Ω
450
450
450
750
≥ 1011
750
900
900
Insulation Resistance
Operating Temperature Range
Terminal Strength (Pull Test)
°C
- 55 to + 175
2
lb
2
2
5
5
2
5
0.10 µV/V over a decade of frequency, with low and intermediate resistance values typically
below 0.5 µV/V
Noise
dB
g
Weight (Max.)
0.12
0.20
0.20
0.50
0.60
1.00
1.10
TEMPERATURE COEFFICIENT CODES
GLOBAL TC CODE
HISTORICAL TC CODE
TEMPERATURE COEFFICIENT
25 ppm/°C
E
H
K
L
T-9
T-2
50 ppm/°C
T-1
100 ppm/°C
T-0
150 ppm/°C
N
T-00
200 ppm/°C
Document Number: 31018
Revision: 20-Jul-10
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
19
CMF Industrial
Metal Film Resistors, Industrial, Precision
Vishay Dale
LOAD LIFE SHIFT DUE TO POWER AND DERATING (AT 70 °C AND AT + 125 °C)
The power rating for the CMF parts is tied to the derating temperature, the heat rise of the parts, and the ΔR for the load life performance.
When the tables/graphs below are used together they show that when the parts are run at their higher power ratings, the parts will run
hotter, which has the potential of causing the resistance of the parts to shift more over the life of the part.
LOAD LIFE SHIFT VS. POWER RATING
MAXIMUM ΔR (TYPICAL TEST LOTS)
LOAD LIFE
0.15 ꢀ
0.5 ꢀ
1.0 ꢀ
0.15 ꢀ
0.5 ꢀ
1.0 ꢀ
MODEL
POWER RATING AT + 70 °C
POWER RATING AT + 125 °C
CMF50
1/20 W and 1/10 W
1/10 W and 1/8 W
1/8 W and 1/4 W
1/4 W and 1/2 W
1/4 W and 1/2 W
1/8 W
1/4 W
1/2 W
3/4 W
3/4 W
1/4 W
1/2 W
1/20 W
1/10 W
1/8 W
1/4 W
1/2 W
1/2 W
1/8 W
CMF55, CMF07
CMF60, CMF20
CMF65
1/10 W
1/8 W
1/4 W
1/4 W
1/4 W
1/2 W
3/4 W
3/4 W
3/4 W and 1 W
1 W
CMF70
1 W
CMF resistors have an operating temperature range of - 55 °C to
+ 175 °C. They must be derated at high ambient temperatures
according to the derating curve.
120
100
80
60
40
20
0
120
100
80
60
40
20
0
CMF50
CMF55,
CMF07
CMF60,
CMF20
CMF65,
CMF70
0
0.125 0.25 0.375
0.5 0.625 0.75 0.875
1
1.125
- 50
0
- 55
- 25
25
50 70 75 100 125 150 165 175 200
APPLIED POWER IN W
AMBIENT TEMPERATURE IN °C
DERATING
THERMAL RESISTANCE
Example:
When a CMF55 part is run at 1/8 W in a 70 °C ambient environment, the resistor will generate enough heat that the surface temperature of
the part will reach about 19 °C over the ambient temperature, and over the life of the part this could cause the resistance value to shift up to
0.15 ꢀ.
If the same resistor was instead run at 1/4 W in a 70 °C environment, the element will heat up to about 30 °C over ambient, and over the life
of the part the resistance value could shift roughly 0.5 ꢀ.
And if the resistor was run at it maximum power rating of 1/2 W in a 70 °C environment, it will heat up to about 58 °C over ambient, and you
could see the resistance value shift roughly 1 ꢀ over the life of the part.
MATERIAL SPECIFICATIONS
Flame retardant epoxy, formulated for superior
Element:
Vacuum-deposited nickel-chrome alloy
Coating:
moisture protection
Continuous satisfactory coverage when tested
in accordance with MIL-R-10509
Core:
Fire-cleaned high purity ceramic
Solderability:
www.vishay.com
20
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31018
Revision: 20-Jul-10
CMF Industrial
Metal Film Resistors, Industrial, Precision
Vishay Dale
SPECIAL MODIFICATIONS
1. Terminals may be supplied in any commercial material
with several type finishes.
MARKING
2. Special pre-conditioning (power aging, temperature
cycling, etc.) to customer specifications.
- Value
- Decade and tolerance
- Date code
3. Non-helixed resistors can be supplied for critical high
frequency applications.
(Alternately, parts may be MIL marked)
4. Fusible, flameproof versions available.
Note
• CMF07 and CMF20 parts are marked with color bands, either per
MIL-PRF-22684 (with a wide white band) or using commercial
color bands. CMFxx..70 and CMFxx..80 parts are marked using
commercial color bands.
PERFORMANCE
AT + 70 °C
AT + 125 °C
TEST
(TEST METHODS - MIL-STD-202)
MAXIMUM ΔR (TYPICAL TEST LOTS)
Short Time Overload
Low Temperature Operation
Moisture Resistance
Shock
0.05 ꢀ
0.05 ꢀ
0.05 ꢀ
0.01 ꢀ
0.004 ꢀ
0.15 ꢀ
0.05 ꢀ
0.05 ꢀ
0.05 ꢀ
0.01 ꢀ
0.04 ꢀ
0.15 ꢀ
Vibration
Temperature Cycling
Load Life
Varies based on power rating used; see load life shift due to power and derating table
Dielectric Withstanding Voltage
Effect of Solder
0.01 ꢀ
0.03 ꢀ
0.01 ꢀ
0.03 ꢀ
Document Number: 31018
Revision: 20-Jul-10
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
21
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号:
CMF600R1500GNEA
RESISTOR, METAL FILM, 1 W, 2 %, 200 ppm, 0.15 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
CMF600R1500JNEA
RESISTOR, METAL FILM, 1 W, 5 %, 200 ppm, 0.15 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
CMF600R1600GNEA
RESISTOR, METAL FILM, 1 W, 2 %, 200 ppm, 0.16 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
CMF600R1600JNEA
RESISTOR, METAL FILM, 1 W, 5 %, 200 ppm, 0.16 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明