CPL15R0300FE313 [VISHAY]
RES 0.03 OHM 15W 1% AXIAL;
| 型号： | CPL15R0300FE313 |
| 厂家： | 
VISHAY |
| 描述： | RES 0.03 OHM 15W 1% AXIAL |
| 文件： | 总3页 (文件大小：99K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
End of Life May-2021
CPL
Vishay Dale
www.vishay.com
Wirewound Resistors, Commercial Power, Axial Lead, Low Value
FEATURES
• High power to size ratio
• Low inductance, less than 5 nH
• Ceramic cases are available with circuit board
Available
stand-offs (designated with a -3 model ending)
• Superior surge capability
• Extremely low resistance values
Available
• Complete welded construction
• Special inorganic potting compound and
ceramic case provide high thermal conductivity
in a fireproof package
Available
• Material categorization:
Available
for definitions of compliance please see
www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
RESISTANCE
RANGE (1)
Ω
WEIGHT
(typical)
g
GLOBAL
MODEL
HISTORICAL
MODEL
TOLERANCE
ꢀ
P40 °C
W
CPL03
CPL-3
CPL-3-3
CPL-5
3
3
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
3.4
3.6
CPL03...3
CPL05
5
4.8
CPL05...3
CPL07
CPL-5-3
CPL-7
5
5.0
7
6.8
CPL07...3
CPL10
CPL-7-3
CPL-10
CPL-10-3
CPL-15
CPL-15-3
7
7.0
10
10
15
15
9.5
CPL10...3
CPL15
9.9
16.8
17.4
CPL15...3
Note
(1)
Resistance is measured 3/8" [9.52 mm] from resistor body
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CPL RESISTOR CHARACTERISTICS
Temperature Coefficient
Short Time Overload
ppm/°C
300
5 x rated power for 5 s
(P x R)1/2
-
V
Maximum Working Voltage
Operating Temperature Range
Terminal Strength
°C
lb
-65 to +275
10 minimum
1000
Dielectric Withstanding Voltage
VAC
GLOBAL PART NUMBER INFORMATION
Global Part Numbering Example: CPL05R0500JB143
C
P
L
0
5
R
0
5
0
0
J
B
1
4
3
GLOBAL MODEL
VALUE
TOLERANCE
PACKAGING
SPECIAL
CPL03
CPL05
CPL07
CPL10
CPL15
R = decimal
R1000 = 0.10 Ω
F = 1.0 ꢀ
G = 2.0 ꢀ
H = 3.0 ꢀ
J = 5.0 ꢀ
K = 10.0 ꢀ
E14 = lead (Pb)-free bulk
(dash number)
(up to 3 digits)
from 1 to 999
as applicable
E31 = lead (Pb)-free four layer bulk
E01 = lead (Pb)-free skin pack
B14 = tin / lead bulk
B31 = tin / lead four layer bulk
J01 = tin / lead skin pack
Historical Part Numbering Example: CPL-5-3 0.05 Ω 5 ꢀ B14
CPL-5-3
0.05 Ω
5 ꢀ
B14
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
Revision: 11-Jan-2021
Document Number: 30212
1
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2021
CPL
Vishay Dale
www.vishay.com
DIMENSIONS in inches [millimeters]
CPLxx
CPLxx...3
B
E
1.0 [25.4]
minimum
A
1.0 [25.4]
minimum
A
C
D
C
0.125 [3.18]
typical
E
B
DIMENSIONS in inches [millimeters]
GLOBAL
A (1)
B
C
D
E
MODEL
0.031 ꢁ0.794ꢂ
0.031 ꢁ0.794ꢂ
0.313 [7.94]
0.313 [7.94]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.500 [12.70]
0.500 [12.70]
0.031 ꢁ0.794ꢂ
0.313 [7.94]
0.313 [7.94]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.500 [12.70]
0.500 [12.70]
0.031 ꢁ0.794ꢂ
0.001 ꢁ0.025ꢂ
CPL03
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
1.391 [35.32]
1.391 [35.32]
1.875 [47.62]
1.875 [47.62]
1.875 [47.62]
1.875 [47.62]
-
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
CPL03...3
CPL05
0.375 [9.52]
-
CPL05...3
CPL07
0.406 [10.32]
-
CPL07...3
CPL10
0.469 [11.91]
-
CPL10...3
CPL15
0.469 [11.91]
-
CPL15...3
0.625 [15.87]
Note
(1)
Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side
MATERIAL SPECIFICATIONS
DERATING
120
Element: self-supporting copper-nickel alloy or nickel-
chrome alloy, depending on resistance range
100
80
60
Body: steatite ceramic case with inorganic potting
compound
Terminals: tinned copper
40
20
Part Marking: Dale, model, wattage, value, tolerance, date
code
0
-65 -25
25
40
75
125
175
225
275
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST
CONDITIONS OF TEST
-55 °C to +275 °C, 5 cycles, 30 min dwell time
TEST LIMITS (EIA RS-344)
ꢀ5ꢁ0 ꢂ ꢃ 0ꢁ05 Ω) ΔR
ꢀ4ꢁ0 ꢂ ꢃ 0ꢁ05 Ω) ΔR
ꢀ2ꢁ0 ꢂ ꢃ 0ꢁ05 Ω) ΔR
ꢀ(ꢁ0 ꢂ ꢃ 0ꢁ05 Ω) ΔR
ꢀ5ꢁ0 ꢂ ꢃ 0ꢁ05 Ω) ΔR
ꢀ5ꢁ0 ꢂ ꢃ 0ꢁ05 Ω) ΔR
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Operation
Bias Humidity
5 x rated power for 5 s
1000 VRMS for 1 min
-65 °C, full rated working voltage for 45 min
75 °C, 90 ꢀ to 100 ꢀ RH, 240 h
1000 h at rated power, +40 °C, 1.5 h “ON”, 0.5 h “OFF”
Load Life
5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions,
360° each
Terminal Strength
ꢀ1ꢁ0 ꢂ ꢃ 0ꢁ05 Ω) ΔR
ꢀ1ꢁ0 ꢂ ꢃ 0ꢁ05 Ω) ΔR
Resistance to Solder Heat
Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body
Revision: 11-Jan-2021
Document Number: 30212
2
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
CPL15R0360HJ01
RESISTOR, WIRE WOUND, 15 W, 3 %, 300 ppm, 0.036 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
CPL15R0360HJ013
RESISTOR, WIRE WOUND, 15 W, 3 %, 300 ppm, 0.036 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明