CPWN0515R00JB14 [VISHAY]
RES 15 OHM 5W 5% AXIAL;型号: | CPWN0515R00JB14 |
厂家: | VISHAY |
描述: | RES 15 OHM 5W 5% AXIAL |
文件: | 总3页 (文件大小:99K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CPW, CPWN
www.vishay.com
Vishay Dale
Wirewound Resistors, Commercial Power, Axial Lead
FEATURES
• High power to size ratio
• Ceramic cases are available with circuit board
stand-offs (designated with a -3 model ending)
• Superior surge capability
Available
• Complete welded construction
• Available in non-inductive styles with Aryton-
Perry winding (CPWN in lieu of CPW, maximum
resistance is one-half CPW range)
• Special inorganic potting compound and
ceramic case provide high thermal conductivity
in a fireproof package
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Available
Available
Available
Note
*
This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING P40 °C RESISTANCE RANGE
TOLERANCE
ꢀ
WEIGHT (typical)
g
W
Ω
CPW02
CPW02...3
CPW03
CPW03...3
CPW05
CPW05...3
CPW07
CPW07...3
CPW10
CPW10...3
CPW15
CPW15...3
CPW20
CPW20...3
CPW-2
CPW-2-3
CPW-3
CPW-3-3
CPW-5
2
2
3
3
5
5
7
7
10
10
15
15
20
20
0.1 to 7K
0.1 to 7K
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
2.0
2.2
3.4
3.6
4.8
5.0
6.8
7.0
9.5
0.1 to 7.5K
0.1 to 7.5K
0.1 to 8.5K
0.1 to 8.5K
0.1 to 18K
0.1 to 18K
0.12 to 30K
0.12 to 30K
0.12 to 30K
0.12 to 30K
0.18 to 45K
0.18 to 45K
CPW-5-3
CPW-7
CPW-7-3
CPW-10
CPW-10-3
CPW-15
CPW-15-3
CPW-20
CPW-20-3
9.9
16.8
17.4
22.8
23.6
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CPW RESISTOR CHARACTERISTICS
Temperature Coefficient
Short Time Overload
Maximum Working Voltage
Operating Temperature Range
Terminal Strength
ppm/°C
30 for 10 Ω and above; 50 for 1.0 Ω to 9.9 Ω; 90 for 0.5 Ω to 0.99 Ω
-
V
°C
lb
5 x rated power for 5 s
(P x R)1/2
-65 to +275
10 minimum
1000
Dielectric Withstanding Voltage
VAC
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CPW0515R00JB313
C
P
W
0
5
1
5
R
0
0
J
B
3
1
3
GLOBAL MODEL
VALUE
TOLERANCE
PACKAGING
SPECIAL
(See Standard Electrical
Specifications Global
Model column for
options)
R = Decimal
K = Thousand
R1500 = 0.15 Ω
1K500 = 1500 Ω
D = 0.5 ꢀ
F = 1.0 ꢀ
G = 2.0 ꢀ
H = 3.0 ꢀ
J = 5.0 ꢀ
K = 10.0 ꢀ
E14 = Lead (Pb)-free bulk
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
E31 = Lead (Pb)-free four layer bulk
E01 = Lead (Pb)-free skin pack
B14 = Tin/lead bulk
B31 = Tin/lead four layer bulk
J01 = Tin/lead skin pack
Historical Part Numbering example: CPW-5-3 15 Ω 5 ꢀ B31
CPW-5-3
15 Ω
5 ꢀ
B31
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
Document Number: 30216
Revision: 22-Dec-15
1
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CPW, CPWN
www.vishay.com
Vishay Dale
DIMENSIONS in inches [millimeters]
CPWxx
CPWxx...3
B
E
E
1.0 [25.4]
min.
1.0 [25.4]
A
A
D
min.
C
C
0.125
[3.18]
typical
B
DIMENSIONS in inches [millimeters]
GLOBAL
MODEL
A (1)
0ꢁ031 ꢂ0ꢁ794]
B
C
D
E
0ꢁ031 ꢂ0ꢁ794]
0ꢁ031 ꢂ0ꢁ794]
0ꢁ031 ꢂ0ꢁ794]
0ꢁ001 ꢂ0ꢁ025]
CPW02
0.688 [17.46]
0.688 [17.46]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
1.391 [35.32]
1.391 [35.32]
1.875 [47.62]
1.875 [47.62]
1.875 [47.62]
1.875 [47.62]
2.500 [63.50]
2.500 [63.50]
0.250 [6.35]
0.250 [6.35]
0.313 [7.94]
0.313 [7.94]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.250 [6.35]
0.250 [6.35]
0.313 [7.94]
0.313 [7.94]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
-
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
CPW02ꢁꢁꢁ3
CPW03
0.313 [7.94]
-
CPW03ꢁꢁꢁ3
CPW05
0.375 [9.52]
-
CPW05ꢁꢁꢁ3
CPW07
0.406 [10.32]
-
CPW07ꢁꢁꢁ3
CPW10
0.469 [11.91]
-
CPW10ꢁꢁꢁ3
CPW15
0.469 [11.91]
-
CPW15ꢁꢁꢁ3
CPW20
0.625 [15.87]
-
CPW20ꢁꢁꢁ3
0.625 [15.87]
Note
(1)
Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.
MATERIAL SPECIFICATIONS
Element: copper-nickel alloy or nickel-chrome alloy,
DERATING
120
100
80
60
40
20
depending on resistance value
Core: ceramic
End Caps: stainless steel
Body: steatite ceramic case with inorganic potting
compound
Terminals: tinned copperweld®
Part Marking: DALE, model, wattage, value, tolerance, date
code
0
- 65 - 25
25
75
125
175
225
275
AMBIENT TEMPERATURE IN °C
40
PERFORMANCE
TEST LIMITS
(EIA RS-344)
TEST
CONDITIONS OF TEST
-55 °C to +275 °C, 5 cycles, 30 min dwell time
Thermal Shock
(2.0 ꢀ + 0.05 Ω) ΔR
(2.0 ꢀ + 0.05 Ω) ΔR
(0.1 ꢀ + 0.05 Ω) ΔR
(2.0 ꢀ + 0.05 Ω) ΔR
(2.0 ꢀ + 0.05 Ω) ΔR
(3.0 ꢀ + 0.05 Ω) ΔR
Short Time Overload
Dielectric Withstanding
Low Temperature Storage
Bias Humidity
5 x rated power for 5 s
1000 VRMS for 1 min
-65 °C, full rated working voltage for 45 min
75 °C, 90 ꢀ to 100 ꢀ RH, 240 h
1000 h at rated power, +40 °C, 1.5 h “ON”, 0.5 h “OFF”
Load Life
Terminal Strength
Resistance to Solder Heat
5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions, 360° each
Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body
(1.0 ꢀ + 0.05 Ω) ΔR
(1.0 ꢀ + 0.05 Ω) ΔR
Revision: 22-Dec-15
Document Number: 30216
2
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明