CRCW1206RKNEI37 [VISHAY]
Lead (Pb)-Free Thick Film, Rectangular Chip Resistors;型号: | CRCW1206RKNEI37 |
厂家: | VISHAY |
描述: | Lead (Pb)-Free Thick Film, Rectangular Chip Resistors |
文件: | 总5页 (文件大小:111K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CRCW....-37 e3
Vishay
Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
FEATURES
• High pulse performance (time/power)
• Metal glaze on high quality ceramic
• Protective overglaze
• Lead (Pb)-free solder contacts on Ni barrier layer
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
STANDARD ELECTRICAL SPECIFICATIONS
SIZE
POWER RATING
RATED
VOLTAGE
V
TEMPERATURE
COEFFICIENT
ppm/K
RESISTANCE
RANGE
Ω
TOLERANCE
%
MODEL
P70 °C
E-SERIES
W
INCH METRIC
CRCW1206-37
CRCW1210-37
CRCW2512-37
1206
1210
2512
3216
3225
6332
0.25
0.33
1.0
200
200
500
200
10
5R1 to 10M
E24
Notes:
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime
• Marking and packaging: see appropriate catalog or web pages
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CRCW1206-37
CRCW1210-37
0.33
CRCW2512-37
(2)
Rated Dissipation at P70
W
0.25
200
1.0
Rated Voltage Umax. AC/DC
Insulation Voltage Uins (1 Min)
Thermal Resistance (1)
Category Temperature Range
Weight
V
200
500
V
> 300
K/W
≤ 220
≤ 140
≤ 65
°
C
- 55 to + 155
16
mg
10
40.5
Notes:
(1) For size 1206 the measuring conditions are in acc. to EN 140401-802. For all other sizes the result depends on the solder pad dimensions.
(2) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
www.vishay.com
1
For technical questions, contact: filmresistors.thickfilmchip@vishay.com
Document Number: 20045
Revision: 28-May-08
CRCW....-37 e3
Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
Vishay
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: CRCW120622K0KNEA37 (1)
C
R
C
W
1
2
0
6
2
2
K
0
K
N
E
A
3
7
MODEL
VALUE
TOLERANCE
TCR
PACKAGING (2)
SPECIAL
CRCW1206
CRCW1210
CRCW2512
R = Decimal
K = Thousand
M = Million
K = 10 ꢀ
N = 200 ppm/K
EA
EB
EC
EG
EH
EI
Up to 2 digits
37 = Non-trimmed
EL
PRODUCT DESCRIPTION: D25/CRCW1206-37 200 22K0 10 % ET1 e3
D25/CRCW1206
200
22K0
10 %
ET1
e3
PACKAGING (2)
MODEL
TCR
RESISTANCE VALUE TOLERANCE VALUE
LEAD (Pb)-FREE
CRCW1206
CRCW1210
CRCW2512
200 ppm/K
10R = 10 Ω
562R = 562 Ω
10K = 10 kΩ
1M = 1 MΩ
10 ꢀ
ET1
ET5
ET6
E67
E82
EG1
E20
e3 = Pure tin
termination
finish
Notes:
(1) Preferred way for ordering products is by use of the PART NUMBER
(2) Please refer to table PACKAGING, see below
PACKAGING
REEL
PACKAGING CODE
PART NUMBER PRODUCT DESC.
PAPER BLISTER
MODEL
TAPE
PIECES/
REEL
DIAMETER
PITCH
WIDTH
PAPER
BLISTER
180 mm/7"
285 mm/11.25"
330 mm/13"
180 mm/7"
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
8 mm
4 mm
5000
10 000
20 000
5000
EA
EB
EC
EA
EB
EC
EI
ET1
ET5
ET6
ET1
ET5
ET6
EG1
CRCW1206-37
8 mm
EL
E20
CRCW1210-37
CRCW2512-37
12 mm
12 mm
285 mm/11.25"
330 mm/13"
10 000
20 000
2000
EG
EH
E67
E82
180 mm/7"
4000
Document Number: 20045
Revision: 28-May-08
For technical questions, contact: filmresistors.thickfilmchip@vishay.com
www.vishay.com
2
CRCW....-37 e3
Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
Vishay
DIMENSIONS
SOLDER PAD DIMENSIONS [in millimeters]
REFLOW SOLDERING WAVE SOLDERING
SIZE
DIMENSIONS [in millimeters]
INCH METRIC
L
W
H
T1
1.6 0.15 0.55 0.05 0.45 0.2
2.5 0.2 0.55 0.05 0.45 0.2
6.3 0.2 3.15 0.15 0.6 0.1 0.6 0.2
T2
a
b
l
a
b
l
+ 0.10
- 0.20
1206
3216
3.2
0.4 0.2
0.9
1.7
2.0
1.1
1.7
2.3
1210
2512
3225
6332
3.2 0.2
0.4 0.2
0.6 0.2
0.9
1.0
2.5
3.2
2.0
5.2
1.1
1.2
2.5
3.2
2.2
5.2
FUNCTIONAL PERFORMANCE
10 000
1000
100
10
1
10-1
10-2
10-6
10-5
10-4
10-3
10-2
10-1
1
10
100
Pulse Duration (s)
Maximum pulse dissipation as a function of the pulse duration for one.pulse loading of CRCW...-37 resistors
120
100
80
60
40
20
0
- 55
- 25
0
25
50
75
70
100
125
155 175
Ambient Temperature in °C
Derating
www.vishay.com
3
For technical questions, contact: filmresistors.thickfilmchip@vishay.com
Document Number: 20045
Revision: 28-May-08
CRCW....-37 e3
Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
REQUIREMENTS
TEST (clause)
CONDITIONS OF TEST
STABILITY CLASS 2 OR BETTER
Stability for product types:
5.1 Ω to 10 MΩ
CRCW....-37
Resistance
(4.5)
-
10 ꢀ
Temperature coefficient
(4.8.4.2)
20/- 55/20 °C and
20/125/20 °C
200 ppm/K
U = 2.5 x (P70 x R)1/2
Overload
(4.13)
≤ 2 x Umax.
;
(0.25 ꢀ R + 0.05 Ω)
Duration: according the style
Aging 4 h at 155 °C, dryheat
solder bath method; 235 °C; 2 s
visual examination
Solderability
(4.17.5)
Good tinning (≥ 95 ꢀ covered)
no visible damage
Solder bath method;
(260 5) °C; (10 1) s
Resistance to soldering heat (4.18.2)
Rapid change of temperature (4.19)
(0.25 ꢀ R + 0.05 Ω)
(0.25 ꢀ R + 0.05 Ω)
(1 ꢀ R + 0.05 Ω)
30 min at LCT = - 55 °C;
30 min at UCT = 125 °C; 5 cycles
Damp heat, steady state
(4.24)
(40 2) °C; 56 days;
(93 3) ꢀ RH
16 h at UCT = 125 °C; 1 cycle at 55 °C;
2 h at LCT = - 55 °C;
Climatic sequence
(4.23)
1 h/1 kPa at 15 °C to 35 °C;
5 cycles at 55 °C
(1 ꢀ R + 0.05 Ω)
(1 ꢀ R + 0.05 Ω)
U = (P70 × R)1/2
U = Umax.; whichever is less severe
U = (P70 × R)1/2
U = Umax.; whichever is less severe
1.5 h ON; 0.5 h OFF;
Endurance at 70 °C
(4.25.1)
70 °C; 1000 h
Extended endurance
(4.25.1.8)
Duration extended to 8000 h
UCT = 125 °C; 1000 h
(2 ꢀ R + 0.1 Ω)
(1 ꢀ R + 0.05 Ω)
Endurance at upper category temperature
(4.25.3)
APPLICABLE SPECIFICATIONS
•
•
•
•
•
EN 60115-1
Generic Specification
Sectional Specification
Detail Specification
EN 140400
EN 140401-802
IEC 60068-2-X
IEC 60286-3
Variety of environmental test procedures
Packaging of SMD components
Document Number: 20045
Revision: 28-May-08
For technical questions, contact: filmresistors.thickfilmchip@vishay.com
www.vishay.com
4
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
CRCW1206TR160KRT5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 16ohm, 200V, 10% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP
VISHAY
CRCW1206TR330KRT1
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 33ohm, 200V, 10% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP
VISHAY
©2020 ICPDF网 联系我们和版权申明