CS33-100RFRD0016 [VISHAY]
Dual Value Chip Resistors, Center Tap; 超值双片式电阻器，中心抽头
| 型号： | CS33-100RFRD0016 |
| 厂家： | 
VISHAY |
| 描述： | Dual Value Chip Resistors, Center Tap |
| 文件： | 总3页 (文件大小：89K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CS 33
Vishay Sfernice
Dual Value Chip Resistors, Center Tap
FEATURES
• Center tap feature
• Small size 30 mil x 30 mil
• Very high ohmic values (up to 5 MΩ)
• Good stability 0.1 % (2000 h, rated power,
at + 70 °C)
Actual Size
• Wirebondable
Chromium silicon thin film is very well suited to produce high
density and high ohmic value resistor chips. Performances
and sizes are greatly improved compared to Thick Film
counterparts. The center tap configuration offers a greater
flexibility for hybrid layout design.
TYPICAL PERFORMANCE
ABS
TRACKING
5 ppm/°C
RATIO
TCR
TOL.
100 ppm/°C
ABS
0.5 %
0.5 %
SCHEMATIC
RT
R1
R2
RT = R1 + R2 with R1 = R2 Standard
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
PASSIVATED CHROMIUM SILICON
10 kΩ to 5 MΩ
CONDITIONS
MATERIAL
Resistance range
for RT = R1 + R2
- 55 °C to + 155 °C
- 55 °C to + 155 °C
Tracking
Absolute
Ratio
5 ppm/°C
TCR:
100 ppm/°C ( 50 ppm/°C on request)
1/1 standard (unequal values: please consult)
0.5 %, 1 %, 2 %
Ohmic value
Tolerance:
Absolute
Matching
0.5 % standard
Power rating
Stability
250 mW at + 25 °C, 125 mW at + 70 °C, 50 mW at + 125 °C
0.1 % typical, 0.2 maximum
0.1 ppm/V
2000 h at + 70 °C under Pn
Voltage coefficient
Working voltage
100 VDC on RT
Operating temperature range
Storage temperature range
Noise
- 55 °C to + 155 °C
- 55 °C to + 155 °C
< - 20 dB typical
MIL-STD-202 Method 308
1 year at + 25 °C
Thermal EMF
< 0.01 µV/°C
Shelf life stability
200 ppm
* Please see document “Vishay Green and Halogen-Free Definitions (5-2008)” http://www.vishay.com/doc?99902
www.vishay.com
24
For technical questions, contact: sfer@vishay.com
Document Number: 60067
Revision: 06-Oct-08
CS 33
Dual Value Chip Resistors, Center Tap
Vishay Sfernice
DIMENSIONS
DIMENSION
INCHES
MILLIMETERS
0.76 0.10
0.76 0.10
0.25 0.40
0.10
B
Bonding Pad Area
D
A
B
C
D
E
F
0.03 0.004
0.03 0.004
0.01 0.015
0.004
A
E
0.006
0.15
C
F
0.006
0.15
MECHANICAL SPECIFICATIONS
Resistive element
Chromium Silicon
Silicone Nitride
Passivation
Substrate material
Bonding pads
Silicon (Consult Vishay for Al2O3)
Aluminum
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CS33-100KF1MD0016 (preferred part number format)
C
S
3
3
-
1
0
0
K
F
1
M
D
0
0
1
6
GLOBAL MODEL
R1 VALUE
ABS. TOLERANCE
R2 VALUE
RAT. TOLERANCE
OPTION
Decimal
R, K or M
D = 0.5 %
F = 1.0 %
G = 2.0 %
Decimal
R, K or M
D = 0.5 %
leave blank if no
option
Historical Part Number example: CS 33 100K 1M 1 % 0.5 % R0016 (will continue to be accepted)
CS 33
100K 1M
1 % 0.5 %
R0016
ABS. TOLERANCE
AND RATIO TOLERANCE
HISTORICAL MODEL
R1/R2 VALUE
OPTION
Document Number: 60067
Revision: 06-Oct-08
For technical questions, contact: sfer@vishay.com
www.vishay.com
25
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明