D2512068B4429FP5 [VISHAY]
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 44.2ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT;型号: | D2512068B4429FP5 |
厂家: | VISHAY |
描述: | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 44.2ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT 电阻器 |
文件: | 总7页 (文件大小:145K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
D.. AP
Vishay
Thick Film, Rectangular Chip Resistors
for Conductive Gluing
FEATURES
• AgPd-Terminations for conductive gluing
• Protective overglaze
• Metal glaze on high quality ceramic
• Compliant with "Restriction of the use of Hazardous
Substances" (RoHS) directive 2002/95/EC (issue 2004)
• Excellent stability (ΔR/R ≤ 1 % for 1000 h at 70 °C)
STANDARD ELECTRICAL SPECIFICATIONS
LIMITING
SIZE
POWER RATING
ELEMENT TEMPERATURE
RESISTANCE
RANGE
Ω
TOLERANCE
%
P70 °C
MODEL
VOLTAGE
MAX
COEFFICIENT
ppm/K
E-SERIES
INCH METRIC
W
V≅
1
5
100
200
100R - 10M
10R - 10M
24 + 96
24
0.063
50
D10 AP
D11 AP
D12 AP
D25 AP
0402
0603
0805
1206
1005
1608
2012
3216
Zero-Ohm-Resistor: Rmax < 200 mΩ, Imax = 0.5 A
1
5
100
200
18R - 10M
3R6 - 10M
24 + 96
24
0.1
75
Zero-Ohm-Resistor: Rmax < 200 mΩ, Imax = 0.7 A
1
5
100
200
18R - 10M
3R6 - 10M
24 + 96
24
0.125
150
Zero-Ohm-Resistor: Rmax < 200 mΩ, Imax = 0.8 A
1
5
100
200
18R - 10M
3R6 - 10M
24 + 96
24
0.25
200
Zero-Ohm-Resistor: Rmax < 200 mΩ, Imax = 1 A
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional time.
• Marking and packaging: see appropriate catalog or web pages
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
W
D10 AP
0.063
50
D11 AP
0.10
D12 AP
0.125
150
D25 AP
0.25
Rated Dissipation at 70 °C 3)
Limiting Element Voltage 2)
Insulation Voltage (1 min)
Thermal Resistance 1)
Insulation Resistance
Category Temperature Range
Failure Rate
V≅
75
200
Vpeak
K/W
Ω
> 75
> 100
≤ 550
> 200
≤ 440
> 300
≤ 220
≤ 870
> 109
°C
- 55 to + 125 (+ 155)
h-1
g
0.3 • 10-9
Weight/1000 pcs
0.65
2
5.5
10
Notes
1. Measuring conditions in acc. to EN 140401-802
2. Rated voltage: PxR
3. The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceed.
www.vishay.com
1
For technical questions in Europe, contact: ff1aresistors@vishay.com
For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com
Document Number: 20038
Revision: 27-Mar-07
D.. AP
Thick Film, Rectangular Chip Resistors
for Conductive Gluing
Vishay
PART NUMBER AND PRODUCT DESCRIPTION D.. AP - SERIES
Part Numbering: D1208058B5620FP51)
D
1
2
0
8
0
5
8
B
5
6
2
0
F
P
5
PACKAGING2)
MODEL/SIZE
SPECIAL CHARACTER
TCR
VALUE
TOLERANCE
SPECIAL
D100402
D110603
D120805
D251206
8 = AgPd terminations
for conductive glueing
B = 100 ppm/K
A = 200 ppm/K
0 = Jumper
3 digit value
F = 1 %
J = 5 %
P0
P5
PN
PZ
B5
BN
up to 2 digits
1 digit multiplier
MULTIPLIER
7 = *10-3
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
6 = *106
0000 = Jumper
Product Description: D12 AP 100 562R 1 % P5
BVxxxx
D12 AP
100
562R
1 %
P5
PACKAGING2)
SPECIAL3)
MODEL
TCR
RESISTANCE VALUE
TOLERANCE
D10 AP
D11 AP
D12 AP
D25 AP
100 ppm/K
200 ppm/K
49K9 = 49.9 kΩ
5R1 = 5.1 Ω
0R0 = Jumper
1 %
5 %
P0
P5
PN
PZ
B5
BN
Customized
part number is
available on
request
Notes
1. Preferred way for ordering products is by use of the PART NUMBER.
2. Please refer to table PACKAGING, see below.
3. Detailed BV Number will appear on the Packaging Label.
PACKAGING
REEL
PACKAGING CODE
MODEL
TAPE WIDTH
DIAMETER
PITCH
PIECES/REEL
PAPER1)
BLISTER
180 mm/7"
330 mm/13"
180 mm/7"
255 mm/10"
330 mm/13"
180 mm/7"
255 mm/10"
330 mm/13"
180 mm/7"
255 mm/10"
330 mm/13"
2 mm
2 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
10 000
50 000
5000
P0
D10 AP
D11 AP
8 mm
PZ
P5
B5
10 000
20 000
5000
8 mm
8 mm
8 mm
P0
PN
P5
BN
B5
D12 AP
D25 AP
10 000
20 000
5000
P0
PN
P5
BN
B5
10 000
20 000
P0
BN
PN
Note
1. Flame treated paper for sizes D10 and D11. Regular paper for sizes D12 and D25.
Document Number: 20038
Revision: 27-Mar-07
For technical questions in Europe, contact: ff1aresistors@vishay.com
For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com
www.vishay.com
2
D.. AP
Thick Film, Rectangular Chip Resistors
for Conductive Gluing
Vishay
DIMENSIONS
SIZE
DIMENSIONS [in millimeters]
T1
INCH METRIC
L
W
H
T2
0.2 + 0.10
- 0.15
0402
0603
0805
1206
1005
1608
2012
3216
1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05
1.55 + 0.10
0.85 0.1 0.45 0.05
1.25 0.15 0.45 0.05
0.3 0.2
0.3 0.2
0.3 0.2
0.4 0.2
- 0.05
2.0 + 0.20
0.3 + 0.20
- 0.10
- 0.10
3.2 + 0.10
- 0.20
1.6 0.15 0.55 0.05 0.45 0.2
SOLDER PAD DIMENSIONS [in millimeters]
REFLOW SOLDERING WAVE SOLDERING
SIZE
INCH METRIC
a
b
l
a
b
l
0402
0603
0805
1206
1005
1608
2012
3216
0.4
0.6
0.5
0.5
0.7
0.9
0.9
1.3
1.7
1.0
1.2
2.0
0.9
0.9
1.1
0.9
1.3
1.7
1.0
1.3
2.3
FUNCTIONAL PERFORMANCE
90
120
100
80
1206
0402
0805
0603
70
60
50
40
30
80
60
40
20
20
10
0
0
0
0.1
0.2
0.3
0.4
0.5
Dera-ti5n5g
70 Ambient Temperature in °C
- 25
0
25
50
75
100
125
150 175
Temperature Rise
Power in Watts
120
110
100
10
1
100
90
80
70
60
50
0402
0603
1206
0805
0603
0402
05
8
0
1206
40
30
20
10
0.1
100
1K
10K
100K
1M
10M
100
1K
10K
100K
1M
10M
Non-Linearity
Resistance Value in Ω
Current Noise
Resistance Value in Ω
www.vishay.com
3
For technical questions in Europe, contact: ff1aresistors@vishay.com
For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com
Document Number: 20038
Revision: 27-Mar-07
D.. AP
Thick Film, Rectangular Chip Resistors
for Conductive Gluing
Vishay
Single Pulse
1000
100
10
1206
0805
0603
0402
1
0.1
0.01
10-6
10-5
10-4
10-3
10-2
10-1
1
10
Pulse Duration ti (s)
Maximum pulse load, single pulse; applicable if P 0 and n ≤ 1000 and U ≤ Umax
for permissible resistance change equivalent to 8000 h operation
;
Continuous Pulse
100
1206
1
0805
0
0
0603
10
0402
1
0.10
0.01
10-6
10-5
10-4
10-3
10-2
10-1
1
10
Pulse Duration ti (s)
Maximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb) and Û ≤ Ûmax
for permissible resistance change equivalent to 8000 h operation
;
Pulse Voltage
1400
1300
1200
1100
1000
900
800
700
1206
600
500
400
0805
300
200
0603
100
0402
0
10-6
10-5
10-4
10-3
10-2
10-1
1
10
Pulse Duration ti (s)
Maximum pulse voltage, single and continuous pulses; applicable if
P ≤ Pmax; for permissible resistance change equivalent to 8000 h operation
Document Number: 20038
Revision: 27-Mar-07
For technical questions in Europe, contact: ff1aresistors@vishay.com
For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com
www.vishay.com
4
D.. AP
Thick Film, Rectangular Chip Resistors
for Conductive Gluing
Vishay
140
120
100
80
140
120
100
80
°C
ϑ
= f [ϑ ]
s
ü
= 20
Parameter: ϑ
u
ü
ϑ
D1
1.. AP
40 °C
60 °C
D
25.. AP
0 °C
8
60
60
100 °C
120 °C
140 °C
40
40
ϑ
= f [P]
ü
20
20
Parameter: size
0
0
20
40
60
80
100
120
140
160
180
0.5
0.4
0.3
0.2
0.1
0
Film temperature ϑ in°C
Load in W
s
0.01
0.1
1
0.01
0.1
1
Δ R/R (t) = f [ΔR/R (t = 1000 h)]
Parameter: time
≤
10K
h
0
0
0
0
0
1
=
t
h
0
0
0
h
0
0
0
h
0
1
0
Δ R/R [t = 1000h] = f [ϑs]
Parameter: resistance value
h
5
0
0
0
0
2
0
1
20
40
60
80
100
120 140 160 180
10
1
0.1
0.01
Resistance change Δ R/R %
Film temperature ϑs in°C
Stability nomogram typical values (for handling see general explanations)
120
100
= 20 °C
= 40 °C
ϑu
80
ϑu
ϑu
60
0.25 W
= 60 °C
40
0 °C
0.125 W
8
=
ϑu
20
0.0625 W
= 120 °C
= 100 °C
ϑu
ϑu
60
80
100
120
140
1
2
3
5
7
10
2
3
5
7
100
2
3
5
7
number of mounted resistors [pcs]
surface temperature ϑs [°C]
Power rating as a function of packaging density (guideline)
www.vishay.com
5
For technical questions in Europe, contact: ff1aresistors@vishay.com
For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com
Document Number: 20038
Revision: 27-Mar-07
D.. AP
Thick Film, Rectangular Chip Resistors
for Conductive Gluing
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
REQUIREMENTS PERMISSIBLE
CHANGE (ΔR/R)
STABILITY CLASS 1 OR BETTER
D11 AP
TEST
(clause)
CONDITIONS OF TEST
D10 AP
D12 AP
D25 AP
stability for product types:
100 Ω to 10 MΩ
18 Ω to 10 MΩ
D..AP
-
1 %
1 %
Resistance (4.5)
U = √(P70 x R)
Endurance at 70 °C (4.25.1)
U = Umax; whichever is less severe
1.5 h on; 0.5 h off; 70 °C; 1000 h
1.0 %
1.0 %
Endurance at upper category
temperature (4.25.3)
UCT = 125 °C; 1000 h
U = 2.5 x √(P70 x R)
Overload (4.13)
≤ 2 x Umax
;
0.25 %
Duration: according the style
30 min. at LCT = - 55 °C
Rapid change of temperature (4.19)
Damp heat, steady state (4.24)
0.25 %
1.0 %
30 min. at UCT = 125 °C; 5 cycles
(40 2) °C; 56 days;
(93 3) % RH
APPLICABLE SPECIFICATIONS
•
•
•
•
•
EN 60115-1
Generic Specification
EN 140400
Sectional Specification
EN 140401-802
IEC 60068-2-X
IEC 60286-3
Detail Specification
Variety of environmental test procedures
Packaging of SMD components
Document Number: 20038
Revision: 27-Mar-07
For technical questions in Europe, contact: ff1aresistors@vishay.com
For technical questions in Americas/Asia, contact: ff2bresistors@vishay.com
www.vishay.com
6
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
D2512068B4649FP0
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 46.4ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D2512068B8459FP0
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 84.5ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D2512068B8459FP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 84.5ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A1100JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 110ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A1302JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 13000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A1604JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1600000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A2200JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 220ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A2702JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 27000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A3304JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 3300000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A4708JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 4.7ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A5608JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 5.6ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
D251206A6808JP5
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 6.8ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明