D2TO020C17R00JTE3 [VISHAY]
RES SMD 17 OHM 5% 20W TO263;
| 型号： | D2TO020C17R00JTE3 |
| 厂家： | 
VISHAY |
| 描述： | RES SMD 17 OHM 5% 20W TO263 |
| 文件： | 总6页 (文件大小：148K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
D2TO20
Vishay Sfernice
www.vishay.com
Surface Mount Power Resistor
Thick Film Technology
FEATURES
• AEC-Q200 qualified
• 20 W at 25 °C case temperature
• Surface mounted resistor - TO-263 (D2PAK)
style package
• Wide resistance range from 0.01 to 550 k
• Non inductive
• Resistor isolated from metal tab
• Solder reflow secure at 270 °C/10 s
LINKS TO ADDITIONAL RESOURCES
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3
D
3D Models
DIMENSIONS in millimeters
Footꢁrint recommendation for
solderable contact area:
4.5
10.5
1.25
8.7
7.8 min.
11.00
1.50
1.6
4.02
0.2
8.8
10.1
6.50
8.00
7.6
2.49
4.00
2.8
2.2
2.40
0.26
1.6
0.ꢂ
5.08
2
4.5
Tolerance: 0.ꢂ mm
Notes
•
•
For the assembly on board, we recommend the lead (Pb)-free thermal profile as per J-STD-020C
Power dissipation is 3.1 W at an ambient temperature of 25 °C when mounted on a double sided copper board using FR4 HTG, 70 μm of
copper, 39 mm x 30 mm x 1.6 mm, with thermal vias
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE RATED POWER LIMITINGELEMENT
TEMPERATURE
COEFFICIENT
ꢁꢁm/°C
CRITICAL
RESISTANCE
TOLERANCE
ꢀ
MODEL
SIZE
RANGE
P25 °C
VOLTAGE UL
W
V
D2TO20
TO-263
0.01 to 550K
20
500
1, 2, 5, 10
150, 250, 700, 1100
12.5K
MECHANICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Power Rating and
Thermal Resistance
of the Comꢁonent
20 W at 25 °C (case
temperature)
TH (j - c): 6.5 °C/W
Mechanical Protection
Resistive Element
Substrate
Molded
Thick film
R
Alumina
Tinned copper
2.2 g max.
Temꢁerature Coefficient
See Special Feature table
150 ppm/°C
Connections
Standard
Dielectric Strength
IEC 60115-1
2000 VRMS - 1 min - 10 mA max.
(between terminals and board)
Weight
Insulation Resistance
Inductance
104 M
0.1 μH
ENVIRONMENTAL SPECIFICATIONS
Temꢁerature Range
-55 °C to +155 °C
IEC 60695-11-5
DIMENSIONS
Flammability
Application time: ta = 10 s
Burning duration: tb < 30 s
TO-263 style
(D2PAK)
Standard Package
Revision: 07-Sep-2021
Document Number: 51055
1
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D2TO20
Vishay Sfernice
www.vishay.com
SPECIAL FEATURES
Resistance Values
0.010
0.045
0.1
0.5
Tolerances
1 % at 10 %
Requirement Temꢁerature Coefficient (TCR)
(-55 °C +150 °C)
IEC 60115-1
1100 ppm/°C
700 ppm/°C
250 ppm/°C
150 ppm/°C
PERFORMANCE
TESTS
CONDITIONS
IEC 60115-1 §4.13
REQUIREMENTS
2 Pr 5 s for R < 2
1.5 Pr 5 s for R 2
US < 1.5 UL
Momentary Overload
(0.25 % + 0.005 )
IEC 60115-1
1000 h, 90/30 Pr at +25 °C
Load Life
(1 % + 0.005 )
AEC-Q200 rev. D conditions:
MIL-STD-202 method 108
1000 h, +175 °C, unpowered
High Temꢁerature Exꢁosure
(0.25 % + 0.005 )
Pre-conditioning 3 reflows according
JESTD020D
Temꢁerature Cycling
IEC 60068-2-14 test Na
1000 cycles, -55 °C/+175 °C
Dwell time - 15 min
(0.5 % + 0.005 )
AEC-Q200 rev. D conditions:
MIL-STD-202 method 106
10 cycles, 24 h, unpowered
Moisture Resistance
Biased Humidity
(0.5 % + 0.005 )
(1 % + 0.005 )
AEC-Q200 rev. D conditions:
MIL-STD-202 method 103
1000 h, 85°C, 85 % RH
AEC-Q200 rev. D conditions:
Pre-conditioning 3 reflows according
JESTD020D
Oꢁerational Life
(1 % + 0.005 )
MIL-STD-202 method 108
2000 h, 90/30, powered, +125 °C
AEC-Q200 rev. D conditions:
AEC-Q200-002
ESD Human Body Model
(0.5 % + 0.005 )
(0.5 % + 0.005 )
25 kVAD
AEC-Q200 rev. D conditions:
MIL-STD-202 method 204
5 g’s for 20 min, 12 cycles
test from 10 Hz to 2000 Hz
Vibration
AEC-Q200 rev. D conditions:
MIL-STD-202 method 213
100 g’s, 6 ms, 3.75 m/s
3 shocks/direction
Mechanical Shock
(0.5 % + 0.005 )
AEC-Q200 rev. D conditions:
AEC-Q200-005
Board Flex
(0.25 % + 0.01 )
(0.25 % + 0.01 )
Bending 2 mm/60 s
AEC-Q200 rev. D conditions:
AEC-Q200-006
Terminal Strength
1.8 kgf/60 s
ASSEMBLY SPECIFICATIONS
For the assembly on board, we recommend the lead (Pb)-free thermal profile as per J-STD-020C
TESTS
CONDITIONS
REQUIREMENTS
IEC 60115-1
IEC 60068-2-58
Solder bath method: 270 °C/10 s
Resistance to Soldering Heat
(0.5 % + 0.005 )
Level: 1
+ pass requirements of TCR
overload and dielectric strength after MSL
IPC/JEDEC® J-STD-020C
85 °C / 85 % RH / 168 h
Moisture Sensitivity Level (MSL)
Revision: 07-Sep-2021
Document Number: 51055
2
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D2TO20
Vishay Sfernice
www.vishay.com
CHOICE OF THE BOARD
The user must choose the board according to the working conditions of the component (power, room temperature). Maximum
working temperature must not exceed 175 °C. The dissipated power is simply calculated by the following ratio:
1
T
P = -------------------------------------------------------------------------------------------
R
+ R
+ R
TH (j - c)
TH (c - h) TH (h - a)
P:
expressed in W
T:
difference between maximum working temperature and room temperature or fluid cooling temperature
RTH (j - c)
:
thermal resistance value measured between resistive layer and outer side of the resistor. It is the thermal resistance
of the component: 6.5 °C/W.
RTH (c - h): thermal resistance value measured between outer side of the resistor and upper side of the board. This is the thermal
resistance of the solder layer.
RTH (h - a): thermal resistance of the board.
Examꢁle:
RTH (c - h) + RTH (h - a) for D2TO20 power rating 2.5 W at ambient temperature +25 °C.
Thermal resistance RTH (j - c): 6.5 °C/W
Considering equation (1) we have:
T = 155 °C - 25 °C = 130 °C
RTH (j - c) + RTH (c - h) + RTH (h - a) = T/P = 130/2.5 = 52 °C/W
RTH (c - h) + RTH (h - a) = 52 °C/W - 6.5 °C/W = 45.5 °C/W
Single Pulse:
These informations are for a single pulse on a cold resistor at 25 °C (not already used for a dissipation) and for pulses of
100 ms maximum duration.
The formula used to calculate E is:
U2
E = P x t = ------- x t
R
with:
E (J): pulse energy
P (W): pulse power
t (s): pulse duration
U (V): pulse voltage
R (): resistor
The energy calculated must be less than that allowed by the graph.
Revision: 07-Sep-2021
Document Number: 51055
3
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D2TO20
Vishay Sfernice
www.vishay.com
POWER RATING
The temperature of the case should be maintained within the limits specified.
Axis Title
125
10000
1000
100
100
75
50
25
0
10
0
20
40
60
80
100
120
140
160
155
Case Temperature (°C)
OVERLOADS
In any case the applied voltage must be lower than the maximum overload voltage of 750 V. The values indicated on the graph
below are applicable to resistors in air or mounted onto a board.
ENERGY CURVE
Axis Title
100
10000
1000
100
10
1
0.1
0.01
0.001
10
0.0000001
0.000001
0.00001
0.0001
0.001
0.01
0.1
Overloard Duration (s)
POWER CURVE
Axis Title
100 000
10000
1000
100
10 000
1000
100
0.0000001
10
0.000001
0.00001
0.0001
0.001
0.01
0.1
Overload Duration (s)
Revision: 07-Sep-2021
Document Number: 51055
4
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D2TO20
Vishay Sfernice
www.vishay.com
IMPEDANCE CURVE 10 to 1 k from 100 kHz to 300 MHz
Axis Title
10000
1.90
1.70
1.50
1.30
10 Ω
1000
25 Ω
50 Ω, 75 Ω, 100 Ω
1.10
1.00
0.90
250 Ω
100
470 Ω
0.70
0.50
0.30
1000 Ω
10
100 kHz
1 MHz
10 MHz
100 MHz
1000 MHz
300 MHz
Frequency (Hz)
MARKING
PACKAGING
• Reel
• Tube
Model, style, resistance value (in ), tolerance (in %),
manufacturing date, Vishay Sfernice trademark
• Tape dimensions (mm) for reel:
16
5.ꢂ
24
16.4
11
ORDERING INFORMATION
D2TO
020
C
100 K
1 ꢀ
XXX
e3
MODEL
STYLE
CONNECTIONS
RESISTANCE
VALUE
TOLERANCE
CUSTOM DESIGN
LEAD (Pb)-FREE
F = 1 %
G = 2 %
J = 5 %
K = 10 %
Optional on request:
shape, etc.
SAP PART NUMBERING GUIDELINES
D
2
T
O
0
2
0
C
R
2
0
0
0
K
R
E
3
GLOBAL
SIZE
020
LEADS
OHMIC VALUE
TOLERANCE
PACKAGING
LEAD (Pb)-FREE
MODEL
D2TO
C = surface-mount
The first four digits are
significant figures and the
last digit specifies the
number of zeros to follow.
F = 1 %
G = 2 %
J = 5 %
K = 10 %
R = reel 500 pieces
T = tube 50 pieces
E3 = pure tin
R
designates decimal
point.
48R70 = 48.7
48701 = 48 700
10002 = 100 000
R0100 = 0.01
R6800 = 0.68
27000 = 2700 = 2.7 k
Revision: 07-Sep-2021
Document Number: 51055
5
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
D2TO020C1R500JRE3
RESISTOR, METAL GLAZE/THICK FILM, 20 W, 5 %, 150 ppm, 1.5 ohm, SURFACE MOUNT, TO-263, ROHS COMPLIANT
VISHAY
D2TO020C20000JRE3
RESISTOR, METAL GLAZE/THICK FILM, 20 W, 5 %, 150 ppm, 2000 ohm, SURFACE MOUNT, TO-263, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明