D55342E07B100BPWS [VISHAY]

RES SMD 100K OHM 0.1% 1/4W 1206;


型号：	D55342E07B100BPWS
厂家：	VISHAY
描述：	RES SMD 100K OHM 0.1% 1/4W 1206
文件：	总5页 (文件大小：96K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

E/H (Military M/D55342)

www.vishay.com

Vishay Dale Thin Film

QPL MIL-PRF-55342 Qualified

Thin Film Resistor, Surface-Mount Chip

FEATURES

• Established reliability, “S” and “V” failure rate level

(10 ppm), C = 2

• High purity alumina substrate

• Wraparound termination featuring a tenacious adhesion

layer covered with an electroplated nickel barrier layer for

+150 °C operating conditions

• Very low noise and voltage coefficient

(< -25 dB, 0.5 ppm/V)

LINKS TO ADDITIONAL RESOURCES

• Non-inductive

• Laser-trimmed tolerances 0.1 %

• Wraparound resistance less than 0.010 Ω typical

• In-lot tracking less than 5 ppm/°C

• Complete MIL-testing available in-house

• Antistatic waffle pack or tape and reel packaging available

• Military / aerospace / QPL

3D Models

Thin Film Mil chip resistors feature all sputtered wraparound

termination for excellent adhesion and dimensional

uniformity. They are ideal in applications requiring stringent

performance requirements. Established reliability is assured

through 100 % screening and extensive environmental lot

testing.

CONSTRUCTION

TYPICAL PERFORMANCE

Resistor Film

Passivation

Solder

Coating

ABSOLUTE

TCR

TOL.

Nickel Barrier

High Purity

Alumina Substrate

0.1

Adhesion Layer

STANDARD ELECTRICAL SPECIFICATIONS

TEST

SPECIFICATIONS

CONDITIONS

Material

Tamelox resistor film (passivated nichrome)

Resistance Range

TCR: Absolute

10 Ω to 6.19 MΩ

25 ppm/°C to 300 ppm/°C

0.1 % to 10 %

ΔR 0.02 %

-55 °C to +125 °C

Tolerance: Absolute

Stability: Absolute

Stability: Ratio

+25 °C

2000 h at +70 °C

Voltage Coefficient

Working Voltage

Operating Temperature Range

Storage Temperature Range

Noise

0.1 ppm/V

30 V to 200 V

-65 °C to +150 °C

< - 25 dB

Shelf Life Stability: Absolute

ΔR 0.01 %

1 year at +25 °C

Revision: 30-Jun-2020

Document Number: 60018

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

E/H (Military M/D55342)

www.vishay.com

Vishay Dale Thin Film

COMPONENT RATINGS

RESISTANCE RANGE (Ω) BY CHARACTERISTICS TOLERANCE

POWER

RATING

(mW)

WORKING

VOLTAGE

(V)

CASE SIZE

H, K, L, M

(0.1 %, 0.25 %, 0.5 %)

H, K, L, M

(1 %, 2 %, 5 %)

(0.1 %, 0.25 %, 0.5 %)

(1 %, 2 %, 5 %)

M55342/01

M55342/02

M55342/03

M55342/04

M55342/05

M55342/06

D55342/07

M55342/08

M55342/09

M55342/10

M55342/11

M55342/12

125

200

150

225

150

250

800

1000

500

49.9 to 150K

49.9 to 301K

49.9 to 649K

49.9 to 1.69M

49.9 to 3.16M

49.9 to 475K

49.9 to 1.5M

49.9 to 4.02M

49.9 to 6.19M

49.9 to 1M

49.9 to 150K

49.9 to 301K

49.9 to 649K

49.9 to 1.69M

49.9 to 3.16M

49.9 to 475K

49.9 to 1.5M

49.9 to 4.02M

49.9 to 6.19M

49.9 to 1M

20 to 150K

20 to 301K

10 to 649K

10 to 1.69M

10 to 3.16M

10 to 475K

10 to 1.5M

10 to 4.02M

10 to 6.19M

49.9 to 1M

20 to 100K

10 to 258K

20 to 150K

20 to 301K

10 to 649K

10 to 1.69M

10 to 3.16M

10 to 475K

10 to 1.5M

10 to 4.02M

10 to 6.19M

49.9 to 1M

20 to 100K

10 to 261K

125

175

100

150

200

49.9 to 100K

49.9 to 258K

49.9 to 100K

49.9 to 261K

100

Note

•

Values listed are a guide, refer to MIL spec for value / tolerance allowance

DIMENSIONS in inches

CASE SIZE

M55342/01

M55342/02

M55342/03

M55342/04

M55342/05

M55342/06

D55342/07

M55342/08

M55342/09

M55342/10

M55342/11

M55342/12

TERM.

0.055 0.006

0.105 0.007

0.155 0.007

0.230 0.007

0.080 0.006

0.126 0.008

0.209 + 0.009/- 0.018

0.259 + 0.009/- 0.015

0.105 0.007

0.040 0.005

0.064 0.006

0.025 0.005

0.050 0.005

0.075 0.005

0.050 0.005

0.063 0.005

0.098 0.005

0.124 0.005

0.100 0.005

0.022 0.005

0.032 0.005

0.010 to 0.033

0.015 to 0.033

0.010 to 0.033

0.010 0.005

0.015 0.005

0.020 0.005

0.016 0.008

0.015 0.005

0.020 0.005

0.015 0.005

0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010

0.020 0.005

0.015 0.005

0.010 0.005

0.012 0.005

0.020 0.005

0.015 0.005

0.010 0.005

0.015 0.005

Revision: 30-Jun-2020

Document Number: 60018

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

E/H (Military M/D55342)

www.vishay.com

Vishay Dale Thin Film

ENVIRONMENTAL TESTS

MIL-PRF-55342 LIMITS

(ΔR

VISHAY PERFORMANCE

ENVIRONMENTAL TEST

)

(ΔR )

Thermal Shock

0.1 %

0.020 %

0.025 %

0.050 %

0.009 %

0.006 %

0.004 %

< 15 ppm/°C

0.02 %

Low Temperature Operation

Short Time Overload

High Temperature Exposure

Resistance to Bonding

Moisture Resistance

TCR

0.1 %

0.2 %

25 ppm/°C

0.5 %

Life (2000 h at + 70 °C)

Life (10 000 h at + 70 °C)

2.0 %

0.04 %

MECHANICAL SPECIFICATIONS

Resistive Element

Substrate Material

Chip Terminations

Fused Solder

Tamelox

FSCM CAGE # - 57489

Alumina

Solder over nickel

Tin / lead solder alloy

DERATING

Axis Title

100

10000

1000

100

-75 -50 -25

25 50 75 100 125 150 175

Ambient Temperature (°C)

Revision: 30-Jun-2020

Document Number: 60018

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

E/H (Military M/D55342)

www.vishay.com

Vishay Dale Thin Film

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: M55342E06B1C00RTS

GLOBAL

MODEL CHARACTERISTIC

TCR

CASE

SIZE

FAILURE

RATE

THIN FILM

CODE ⁽¹⁾

TERMINATION

OHMIC VALUE

PACKAGING

Standard Packaging:

M55342 E = 25 ppm/°C 01 = 0502 B = solderable Three digits and a letter. Letter

= 1.0 %

for

or H = 50 ppm/°C 02 = 0505 identifies tolerance, acts as per 1000 h BS = BULK

D55342 K = 100 ppm/°C 03 = 1005

(/07 size L = 200 ppm/°C 04 = 1505

only)

multiplier and decimal locator.

MULTIPLIER

= 0.1 %

per 1000 h

= 0.01 %

per 1000 h

= 0.01 %

per 1000 h ⁽³⁾TAPE AND REEL

= 0.001 % T0 = 100 min., 100 mult.

per 1000 h T1 = 1000 min., 1000 mult.

= 0.001 % T3 = 300 min., 300 mult.

per 1000 h ⁽³⁾T5 = 500 min., 500 mult.

= non ER TF = full reel (2K, 4K, or

25 min., 1 mult.

WS = WAFFLE

25 min., 1 mult.

W0 = WAFFLE

100 min.,100 mult.

K, L, and M

TCR

M = 300 ppm/°C 05 = 2208

06 = 0705

W/tolerance

≥ 1 %

Tolerance 1 Ω 1 kΩ 1 MΩ

07 = 1206

M = part

0.1 %

0.25 %

0.5 %

1 %

08 = 2010

marked ⁽²⁾

09 = 2512

10 = 1010

11 = 0402

12 = 0603

2 %

version

5K dependent on case

size) per tape and reel

document 60034

TS = 25 min., 1 mult.

Special Packaging:

WAFFLE

5 %

10 %

WI = 25 min., 1 mult.

(item single lot date

code)

WP = 25 min., 1 mult.

(package unit single lot

date code)

TAPE AND REEL

TI = 25 min., 1 mult.

(item single lot date

code)

TP = 25 min., 1 mult.

(package unit single lot

date code)

Historical Part Number Example: M55342K06B5E60R (for reference purposes only)

M55342

5E60

SERIES

TCR

CASE SIZE

TERMINATION

VALUE AND

TOLERANCE

FAILURE RATE

CHARACTERISTIC

Notes

•

For M/D55342 T-level failure rate options please see VTF E/H (T-level) datasheet: www.vishay.com/ppg?60060

Only add a V at the end of part number to specify Vishay Dale Thin Film for K, L and M TCR and tolerance 1 % and higher

Option 1 marking only. Case sizes 01, 02, 11, and 12 not available due to size

(1)

(2)

(3)

Failure rate U and V require group A and B testing on a production lot basis

Revision: 30-Jun-2020

Document Number: 60018

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

D55342E07B100BPWS [VISHAY]

相关型号：

D55342E07B100BRT0

D55342E07B100BRT5

D55342E07B100BRTI

D55342E07B100BRTP

D55342E07B100BRWP

D55342E07B100BRWS

D55342E07B100DMT0

D55342E07B100DRBS

D55342E07B100DRT0

D55342E07B100DRT3

D55342E07B100DRTF

D55342E07B100DRWS