DBZ55135WP10136CB1 [VISHAY]
Two different versions of the outer electrode terminal;
| 型号： | DBZ55135WP10136CB1 |
| 厂家： | 
VISHAY |
| 描述： | Two different versions of the outer electrode terminal |
| 文件： | 总4页 (文件大小：93K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DB 055135 HQ, DBZ 055135 HQ
www.vishay.com
Vishay Draloric
RF Power Feed-Through Capacitors
with Conductor Rod, Class 1, R16 HQ Ceramic Dielectric
FEATURES
• High voltage ratings
• High feed-through currents
• Two different versions of the outer electrode terminal
APPLICATIONS
These capacitors feature a Q-factor greater than 10 000
which makes it well suited in operating frequency range
from 0.1 MHz up to 30 MHz where high voltages and
currents are present.
CAPACITANCE RANGE
100 pF
CAPACITANCE TOLERANCE
QUICK REFERENCE DATA
10 ꢀ
DESCRIPTION
Ceramic Class
Ceramic Dielectric
Type
VALUE
1
CERAMIC DIELECTRICS
R16 HQ
R16 High Q (TCC + 100 ppm/K)
DB 055135
DBZ 055135
RATED VOLTAGE
Voltage (Vp)
20 000
100
Min. Capacitance (pF)
Max. Capacitance (pF)
Mounting
20 kVp
100
DIELECTRIC STRENGTH TEST
Screw terminal
200 ꢀ of rated AC voltage (50 Hz, 5 minutes)
MATERIAL
RF POWER TEST
Capacitor elements made from class 1 ceramic dielectric
with noble metal electrodes.
114 ꢀ of rated power, for 5 minutes in a test generator
circuit
Connection terminals:
made from copper / brass, silver plated
DISSIPATION FACTOR
FINISH
Max. 0.025 ꢀ (1 MHz)
Capacitor body completely protective lacquered.
The contoured insulating rims are additionally glazed.
INSULATION RESISTANCE
Min. 100 000 M (at 25 °C)
MARKING
OPERATING TEMPERATURE RANGE
Type designator, capacitance value and tolerance, rated
peak voltage, ceramic material code, production date code,
manufacturer logo
-55 °C to +100 °C
ACCESSORIES ADDED
All feed-through capacitors are supplied with the necessary
nuts and washers to make the connection to the conductor
rod.
Revision: 02-Sep-15
Document Number: 22148
1
For technical questions, contact: powcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DB 055135 HQ, DBZ 055135 HQ
www.vishay.com
Vishay Draloric
SAP PART NUMBER AND ELECTRICAL DATA
CAP.
VALUES
(pF)
RATED
VOLTAGE
(kVP)
RATED
POWER (1)
(kvar)
RATED
FEED-THROUGH
CURRENT (2)
(A)
PART NUMBER
CERAMIC
CURRENT
(ARMS
)
TYPE DB 055135
DB055135WP10136CB1
TYPE DBZ 055135
R16 HQ
R16 HQ
100
100
20.0
20.0
Max. 900.0
Max. 900.0
150.0
150.0
80.0
80.0
DBZ55135WP10136CB1
Notes
(1)
The surface temperature during operation must not exceed +100 °C
DC or low frequency RMS current (< 20 kHz)
(2)
DIMENSIONS in millimeters (inches)
DB 055135
DBZ 055135
Ø 82
(3.23 Dia.)
Ø 75
(2.95 Dia.)
25
1
(0.98 0.04)
M10 Thread (both ends)
1
2 (0.08)
(0.04)
Ø 55
(2.17 Dia.)
SW 17 (0.67 HEX)
SW 17
(0.67 HEX)
M10 Thread
(both ends)
25
1
(0.98 0.04)
Ø 9.5 + 0.3
(0.374 + 0.012 Dia.)
60°
60°
Ø 5.5 + 0.2
(0.217 + 0.008 Dia.)
Revision: 02-Sep-15
Document Number: 22148
2
For technical questions, contact: powcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DB 055135 HQ, DBZ 055135 HQ
www.vishay.com
Vishay Draloric
MOUNTING GUIDELINES
• The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the
capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical
tolerances of these components.
• The capacitor elements must not be used as a mechanical support for other devices or components.
• Use two wrenches when tightening the nuts on both sides of the conductor rod.
The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner
electrode’s connection.
• Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque
less than 5 Nm is recommended.
DERATING DIAGRAM
DB055135WP10136CB1, DBZ55135WP10136CB1
Ig (ARMS
Qg (kvar)
1000
)
7.16 MHz
39.8 MHz
Ug (kVp)
100
Ug
10
1
100
10
1
Qg
Ig
0.1
1
10
100
1000
Frequency (MHz)
RELATED DOCUMENTS
General Information
www.vishay.com/doc?22071
Revision: 02-Sep-15
Document Number: 22148
3
For technical questions, contact: powcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明