DFP1411RJE05 [VISHAY]
Thick Film Resistor Networks Flat Pack, 11, 12 Schematics; 厚膜电阻器网络扁平封装， 11 ， 12示意图
| 型号： | DFP1411RJE05 |
| 厂家： | 
VISHAY |
| 描述： | Thick Film Resistor Networks Flat Pack, 11, 12 Schematics |
| 文件： | 总3页 (文件大小：275K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DFP
Vishay Dale
Thick Film Resistor Networks
Flat Pack, 11, 12 Schematics
FEATURES
• 11 and 12 Schematics
• 0.065" [1.65 mm] height for high density packaging
• Low temperature coefficient (- 55 °C to + 125 °C)
100 ppm/°C
• Hot solder dipped leads
• Highly stable thick film
• Wide resistance range
• All devices are capable of passing the MIL-STD-202,
Method 210, Condition C "Resistance to Soldering Heat"
test
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
LIMITING ELEMENT
TEMPERATURE
TEMPERATURE1) STANDARD2)
RESISTANCE
RANGE
Ω
P25 °C
ELEMENT
W
P25 °C
PACKAGE
W
GLOBAL
MODEL
CIRCUIT
SCHEMATIC
VOLTAGE
MAX.
COEFFICIENT
TRACKING
ppm/°C
COEFFICIENT
ppm/°C
TOLERANCE
%
V≅
0.25
0.15
0.65
0.65
11
12
75
75
100
100
2
2
10 - 1M
10 - 1M
50
50
DFP
Notes
1. Temperature Range: - 55 °C to + 125 °C
2. 1 % and 5 % tolerance available
• Consult factory for stocked values
TECHNICAL SPECIFICATIONS
11 Schematic
7 or 8 isolated resistors
The DFPxx11 provides the user with 7 or 8 nominally equal resistors with
each resistor isolated from all others. Commonly used in the following
applications:
• "Wired OR" Pull-up
• Power Driven Pull-up
• Power Gate Pull-up
• Line Termination
• Long-line Impedance Balancing
• LED Current Limiting
• ECL Output Pull-down
• TTL Input Pull-down
DFP1411
Pin #1
DFP1611
12 Schematic
13 or 15 resistors with one pin common
The DFPxx12 provides the user with a choice of 13 or 15 nominally equal
resistors, each connected to a common pin (14 or 16). Commonly used in
the following applications:
•
•
• • • • •
•
• MOS/ROM Pull-up/Pull-down
• Open Collector Pull-up
• "Wired OR" Pull-up
• TTL Input Pull-down
• Digital Pulse Squaring
• TTL Unused Gate Pull-up
• High Speed Parallel Pull-up
DFP1412
Pin #1
• Power Driven Pull-up
DFP1612
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DFP14121K00GD05 (preferred part numbering format)
D
F
P
1
4
1
2
1
K
0
0
G
D
0
5
GLOBAL MODEL PIN COUNT
SCHEMATIC
RESISTANCE
VALUE
TOLERANCE
PACKAGING
SPECIAL
CODE
DFP
14
16
11 = Isolated
12 = Bussed
R = Decimal
K = Thousand
M = Million
10R0 = 10 Ω
680K = 680 kΩ
1M00 = 1.0 MΩ
F = 1 %
G = 2 %
J = 5 %
E05 = Lead (Pb)-free, Tube
D05 = Tin/Lead, Tube
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999
as applicable
Historical Part Number example: DFP1412102G (will continue to be accepted)
DFP
14
12
102
RESISTANCE VALUE
G
D05
HISTORICAL MODEL
PIN COUNT
SCHEMATIC
TOLERANCE CODE
PACKAGING
www.vishay.com
328
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31513
Revision: 08-Sep-04
DFP
Thick Film Resistor Networks
Flat Pack, 11, 12 Schematics
Vishay Dale
DIMENSIONS in inches [millimeters]
Pin #1
0.250 [6.35]
Min.
0.250 [6.35]
Min.
0.005 + 0.004
- 0.002
0.365 [9.27] Min.
0.385 [9.78] Max.
0.050
[1.27]
Typ.
0.065
[1.65]
Max.
[0.127 + 0.102
- 0.051]
0.825 [20.96]
Max.
0.019 0.006
[0.48 0.15]
0.265 [6.73] Max.
GLOBAL MODEL
DFP14
DFP16
DIMENSION A
0.037 0.010 [0.94 0.25]
0.012 0.010 [0.30 0.25]
TECHNICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Marking
Model number, schematic number, value
tolerance, pin 1 indicator, date code.
PARAMETER
UNIT
DFP14/16
> 100
Isolation Resistance 11 Schematic
Voltage Coefficient of Resistance
Maximum Operating Voltage
Operating Temperature Range
Storage Temperature Range
MΩ
Marking Resistance Permanency testing per MIL-STD-202
to Solvents
Solderability
Terminals
Method 215.
ppm/V
VDC
°C
< 50 typical
75
Per MIL-STD-202, Method 208E.
Per MIL-STD-1276 DFPxx11, DFPxx12 =
Type G (hot solder dipped). Hot solder
dipped leads supplied as standard finish.
- 55 to + 125
- 55 to + 150
°C
Body
Epoxy filled ceramic sandwich
11 Schematic
12 Schematic
Package
Package
0.65
0.50
0.65
0.50
Single Resistor
0.25
Single Resistor
0.15
- 55
+ 25
+ 70
+ 125 + 150
- 55
+ 25
+ 70
+ 125 + 150
Derating
Ambient Temperature °C
Derating
Ambient Temperature °C
PERFORMANCE
TEST
CONDITIONS
MAX.
ΔR (Typical Test Lots)
1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF”
for 100 hours 4 hours at + 25 °C ambient temperature
Power Conditioning
0.50 % ΔR
Thermal Shock
5 cycles between - 65 °C and + 125 °C
0.50 % ΔR
0.25 % ΔR
0.25 % ΔR
0.50 % ΔR
0.25 % ΔR
0.25 % ΔR
0.25 % ΔR
Short Time Overload
2.5 x rated working voltage, 5 seconds
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
45 minutes at full rated working voltage at - 65 °C
240 hours with humidity ranging from 80 % RH to 98 % RH
Leads immersed in + 260 ° ΔC solder to within 1/16" of body for 10 seconds
Total of 18 shocks at 100 g's
Vibration
12 hours at maximum of 20 g's between 10 and 2000 Hz
1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF”
for full 1000 hour period. Derated according to the curve.
Load Life
0.50 % ΔR
Terminal Strength
1.5 pound pull for 30 seconds
10 000 Megohm (minimum)
0.25 % ΔR
Insulation Resistance
-
Dielectric Withstanding
Voltage
No evidence of arcing or damage (200 V RMS for 1 minute)
-
Document Number: 31513
Revision: 08-Sep-04
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
329
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
DFP1412120RGE05
RESISTOR, NETWORK, FILM, BUSSED, 0.65 W, THROUGH HOLE MOUNT, FLAT PACK, LEAD FREE
VISHAY
DFP1412130RGE05
RESISTOR, NETWORK, FILM, BUSSED, 0.65 W, THROUGH HOLE MOUNT, FLAT PACK, LEAD FREE
VISHAY
DFP141213K0GE05
RESISTOR, NETWORK, FILM, BUSSED, 0.65 W, THROUGH HOLE MOUNT, FLAT PACK, LEAD FREE
VISHAY
©2020 ICPDF网 联系我们和版权申明