DG1413E [VISHAY]
Supports single and dual supply operation;
| 型号： | DG1413E |
| 厂家： | 
VISHAY |
| 描述： | Supports single and dual supply operation |
| 文件： | 总14页 (文件大小：347K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
1.5 On Resistance, 15 ꢀ ꢁ ꢂ12 ꢀ ꢁ 5 ꢀ, ꢃꢄau dꢅdP dꢆitcꢇes
DESCRIPTION
FEATURES
• 35 V supply max. rating
• On-resistance: 1.5
• On-resistance flatness: 0.2
• Channel to channel on-resistance match: 0.04
• Supports single and dual supply operation
• Fully specified at 15 V, 5 V, and +12 V
• Integrated VL supply
• 3 V logic compatible
• Low parasitic capacitance: CS(OFF): 24 pF, CD(ON): 87 pF
• Rail to rail signal handling
The DG1411E, DG1412E, DG1413E are 15 V precision
monolithic quad single-pole single-throw (SPST) CMOS
analog switches. Built on a new CMOS process, the Vishay
Siliconix DG1411E, DG1412E, and DG1413E offer low
on-resistance of 1.5 . The low and flat resistance over the
full signal range ensures excellent linearity and low signal
distortion. The new CMOS platform provides low power
dissipation, minimized parasitic capacitance, and low
charge injection.
The devices operate from either a single 4.5 V to 24 V power
supply, or from dual 4.5 V to 15 V power supplies. The
analog switches do not require a VL logic supply, while all
digital inputs have 0.8 V and 2 V logic thresholds to ensure
low voltage TTL / CMOS compatibility.
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
BENEFITS
The DG1411E, DG1412E, and DG1413E are bi-directional
and support analog signals up to the supply voltage when
on, and block them when off. The devices each feature four
independently selectable SPST switches. The DG1411E is
normally closed, while the DG1412E is normally open. The
DG1413E has two normally open and two normally closed
switches with guaranteed break-before-make operation.
• Low insertion loss
• Low distortion
• Break-before-make switching
• Low charge injection over the full signal range
APPLICATIONS
• Medical and healthcare equipment
• Data acquisition system
• Industrial control and automation
• Test and measurement equipment
• Communication systems
• Battery powered systems
• Sample and hold circuits
• Audio and video signal switching
• Relay replacement
Combined with fast 70 ns switching time, low and flat switch
resistance. The devices are ideal for signal switching and
relay replacement in data acquisition, industrial control and
automation, communication, and A/V systems, in addition to
medical instrumentation and automated test equipment.
The switches are available in RoHS-compliant, halogen-free
TSSOP16 and QFN16 4 mm by 4 mm packages.
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION - DG1411E
DG1411EEN
QFN-16 (4 mm x 4 mm)
DG1411EEQ
TSSOP
16
15
14
13
IN2
D2
S2
V+
IN1
D1
S1
1
2
3
4
5
6
7
8
16
15
14
13
12
11
S1
V-
S2
1
2
3
4
12
11
10
9
V+
V-
Top View
Top View
GND
S4
N.C.
S3
GND
S4
N.C.
S3
D4
10 D3
5
6
7
8
IN4
9
IN3
Notes
TRUTH TABLE - DG1411E
•
•
•
QFN exposed pad tied to V-
N.C. = no connect
Switches shown for logic “0” input
LOGIC
dWIPCH
On
0
1
Off
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION - DG1412E
DG1412EEN
QFN-16 (4 mm x 4 mm)
DG1412EEQ
TSSOP
16
15
14
13
IN2
D2
S2
V+
IN1
D1
S1
1
2
3
4
5
6
7
8
16
15
14
13
S1
V-
S2
1
2
3
4
12
11
10
9
V+
V-
Top View
Top View
GND
S4
N.C.
S3
GND
S4
12 N.C.
S3
11
D4
10 D3
IN4
5
6
7
8
9
IN3
Notes
TRUTH TABLE - DG1412E
•
•
•
QFN exposed pad tied to V-
N.C. = no connect
Switches shown for logic “0” input
LOGIC
dWIPCH
Off
0
1
On
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION - DG1413E
DG1413EEN
QFN-16 (4 mm x 4 mm)
DG1413EEQ
TSSOP
16
15
14
13
IN2
D2
S2
V+
IN1
D1
S1
1
2
3
4
5
6
7
8
16
15
14
13
12
11
S1
V-
S2
1
2
3
4
12
11
10
9
V+
Top View
V-
GND
S4
N.C.
S3
Top View
GND
S4
N.C.
S3
D4
10 D3
5
6
7
8
IN4
9
IN3
Notes
TRUTH TABLE - DG1413E
•
•
•
QFN exposed pad tied to V-
N.C. = no connect
Switches shown for logic “0” input
LOGIC
dWIPCHEd 1, 4
dWIPCHEd 2, 3
0
1
Off
On
On
Off
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
2
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
DEVICE OPTIONS
dWIPCH
FUNCPION
PEMꢅERAPURE
ꢅACKAGE
RANGE
ꢅARP NUMBER
CONFIGURAPION
DG1411EEN-T1-GE4
DG1412EEN-T1-GE4
DG1413EEN-T1-GE4
DG1411EEQ-T1-GE4
DG1412EEQ-T1-GE4
DG1413EEQ-T1-GE4
Quad SPST
Quad SPST
Quad SPST
Quad SPST
Quad SPST
Quad SPST
NC
NO
-40 °C to +125 °C
-40 °C to +125 °C
-40 °C to +125 °C
-40 °C to +125 °C
-40 °C to +125 °C
-40 °C to +125 °C
QFN (4 mm x 4 mm) 16L (variation 2)
QFN (4 mm x 4 mm) 16L (variation 2)
QFN (4 mm x 4 mm) 16L (variation 2)
TSSOP-16
NC / NO
NC
NO
TSSOP-16
NC / NO
TSSOP-16
ABSOLUTE MAXIMUM RATINGS
ELECPRICAL ꢅARAMEPER
CONDIPIONd
Reference to GND
Reference to GND
LIMIPd
UNIP
V+
-0.3 to +25
V-
+0.3 to -25
V+ to V-
+35
V
Analog inputs (S or D)
Digital inputs
(V-) - 0.3 to (V+) + 0.3
GND - 0.3 to (V+) + 0.3
TSSOP-16, TA = 25 °C
190
250
90
QFN (4 mm x 4 mm) 16L, TA = 25 °C
TSSOP-16, TA = 125 °C
Maximum continuous switch current
mA
QFN (4 mm x 4 mm) 16L, TA = 125 °C
Pulse at 1 ms, 10 % duty cycle
TSSOP-16
100
500
130
32
Maximum pulse switch current
Thermal resistance
°C/W
QFN (4 mm x 4 mm) 16L
Pemperatꢄre
Operating temperature
Max. operating junction temperature
Operating junction temperature
Storage temperature
-40 to +125
150
°C
125
-65 to +150
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
3
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
ELECTRICAL CHARACTERISTICS - 15 V supply
PEdP CONDIPIONd
UNLEdd OPHERWIdE dꢅECIFIED
-40 °C to
ꢂ85 °C
-40 °C to
ꢂ125 °C
PYꢅ. ꢁ
MAX.
ꢅARAMEPER
dYMBOL
ꢂ25 °C
UNIP
V+ = 15 V, V- = -15 V
VINH = 2 V, VINL = 0.8 V
Analog dꢆitcꢇ
Analog signal range
VANALOG
RDS(on)
0 to V+
-
V
1.5
1.8
-
-
2.3
-
Typ.
Max.
-
VS = 10 V, IS = -10 mA
V+ = 13.5 V, V- = -13.5 V
Drain-source on-resistance
On-resistance flatness
2
0.2
-
Rflat(on)
RDS(on)
IS/Id(off)
Id(on)
VS = 10 V, IS = -10 mA
0.42
0.04
0.22
0.01
0.5
0.45
0.48
-
Max.
Typ.
Max.
Typ.
Max.
Typ.
Max.
nA
V
-
On-resistance matching
Switch off leakage current
Channel on leakage current
0.23
0.24
-
-
V+ = 16.5 V, V- = -16.5 V
10 V
VS = 10 V, VD
VS = VD
=
2
-
12
-
0.05
1
=
10 V
3
40
Digital Control
Input, high voltage
Input, low voltage
VINH
VINL
-
-
-
-
-
-
-
2
0.8
-
Vmin.
Vmax.
Typ.
Max.
Typ.
0.001
-
Input leakage
IIN
VIN = VGND or V+
μA
pF
0.1
-
Digital input capacitance
CIN
3.5
Dynamic Cꢇaracteristics
24
-
-
-
Typ.
Min.
Typ.
Max.
Typ.
Max.
Typ.
Typ.
Typ.
Typ.
VS1= VS2 = 10 V
RL= 300 , CL = 35 pF
Break-before-make time
Turn-on time
tOPEN
tON
-
10
70
-
-
ns
110
50
130
140
VS = 10 V
RL = 300 , CL = 35 pF
-
-
Turn-off time
tOFF
90
100
110
Charge injection
Off isolation
Cross talk
QINj
CL = 1 nF, RGEN = 0 , VS = 0 V
CL = 5 pF, RL = 50 , 100 kHz
CL = 5 pF, RL = 50 , 1 MHz
f = 1MHz, RL = 50 , CL = 5 pF
-41
-78
-104
-0.16
-
-
-
-
-
-
-
-
pC
dB
OIRR
XTALK
Insertion loss
RL = 110 , 15 Vp-p
,
Total harmonic distortion
THD
0.0039
-
-
Typ.
%
f = 20 Hz to 20 kHz
Bandwidth, -3 dB
BW
CL = 5 pF, RL = 50
150
24
-
-
-
-
-
-
-
-
Typ.
Typ.
Typ.
Typ.
MHz
Source off capacitance
Drain off capacitance
Drain on capacitance
ꢅoꢆer Reqꢄirements
Power supply range
CS(off)
CD(off)
CD(on)
f = 1 MHz, VS = 0 V
23
pF
V
87
GND = 0 V
4.5 V min. / 16.5 max.
0.001
-
-
1
Typ.
Max.
Typ.
Max.
Typ.
Max.
Digital inputs 0 or V+
V+ = 16.5 V, V- = -16.5 V
-
113
-
-
I+
I-
-
260
-
-
Power supply current
IN1 = IN2 = IN3 = IN4 = 5 V
Digital inputs 0 or V+
μA
290
-
0.001
-
-
1
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
4
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
ELECTRICAL CHARACTERISTICS - Single 12 V supply
PEdP CONDIPIONd
UNLEdd OPHERWIdE dꢅECIFIED
-40 °C to -40 °C to
PYꢅ. ꢁ
MAX.
ꢅARAMEPER
dYMBOL
ꢂ25 °C
UNIP
V+ = 12 V, V- = -0 V
ꢂ85 °C
ꢂ125 °C
V
INH = 2 V, VINL = 0.8 V
Analog dꢆitcꢇ
Analog signal range
VANALOG
RDS(on)
0 to V+
V
2.5
3.1
-
3.8
-
-
4.4
-
Typ.
Max.
Typ.
Max.
Typ.
Max.
Typ.
Max.
Typ.
Max.
VS = 0 V to 10 V, IS = -10 mA;
V+ = 10.8 V, V- = 0 V
Drain-source on-resistance
On-resistance flatness
0.7
Rflat(on)
RDS(on)
IS/Id(off)
Id(on)
VS = 0 V to 10 V; IS = -10 mA
0.9
1
1.1
-
nA
V
0.04
0.19
0.02
0.55
0.01
1
-
On-resistance matching
Switch off leakage current
Channel on leakage current
0.22
-
0.25
-
V+ = 10.8 V, V- = 0 V
VS = 1 V/10 V; VD = 10 V/1 V
1.2
-
10
-
VS = VD = 3.2 V/10 V
2
35
Digital Control
Input, high voltage
Input, low voltage
VINH
VINL
-
-
-
-
-
-
-
2
0.8
-
Min.
Max.
Typ.
Max.
Typ.
0.001
-
Input leakage
IIN
VIN = VGND or V+
μA
pF
0.1
-
Digital input capacitance
CIN
3.5
Dynamic Cꢇaracteristics
90
-
-
-
Typ.
Min.
Typ.
Max.
Typ.
Max.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
VS1= VS2 = 8 V
RL= 300 , CL = 35 pF
Break-before-make time
Turn-on time
tOPEN
tON
-
50
150
190
60
-
-
ns
230
260
VS = 8 V
RL = 300 , CL = 35 pF
-
-
Turn-off time
tOFF
100
6
110
120
Charge injection
Off isolation
QINj
CL = 1 nF, RGEN = 0 , VS = 6 V
RL = 50 , CL = 5 pF, 100 kHz
RL = 50 , CL = 5 pF, 1 MHz
f = 1 MHz, RL = 50 , CL = 5 pF
RL = 50 , CL = 5 pF
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
pC
dB
OIRR
XTALK
-78
-106
-0.23
150
31
Cross talk
Insertion loss
Bandwidth, -3 dB
Source off capacitance
Drain off capacitance
Drain on capacitance
ꢅoꢆer Reqꢄirements
Power supply range
BW
MHz
pF
CS(off)
CD(off)
CD(on)
f = 1 MHz, VS = 6 V
29
93
GND = 0 V, V- = 0 V
5 V min. / 16.5 max.
V
0.001
-
-
-
1
Typ.
Max.
Typ.
Max.
Digital inputs 0 or V+
V+ = 13.2 V
-
54
-
Power supply current
I+
μA
-
-
IN1 = IN2 = IN3 = IN4 = 5 V
150
190
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
5
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
ELECTRICAL CHARACTERISTICS - 5 V supply
PEdP CONDIPIONd
UNLEdd OPHERWIdE dꢅECIFIED
-40 °C to -40°Cto
PYꢅ. ꢁ
MAX.
ꢅARAMEPER
dYMBOL
ꢂ25 °C
UNIP
V+ = 5 V, V- = -5 V
ꢂ85 °C
ꢂ125 °C
V
INH = 2 V, VINL = 0.8 V
Analog dꢆitcꢇ
Analog signal range
VANALOG
RDS(on)
0 to V+
V
3
-
-
4.7
-
Typ.
Max.
Typ.
Max.
Typ.
Max.
Typ.
Max.
Typ.
Max.
VS = 4.5 V, IS = -10 mA
V+ = 4.5 V, V- = -4.5 V
Drain-source on-resistance
On-resistance flatness
3.3
4
0.7
-
1
Rflat(on)
RDS(on)
IS/Id(off)
Id(on)
VS = 4.5 V, IS = -10 mA
0.9
1.1
-
0.04
0.19
0.004
0.5
-
On-resistance matching
Switch off leakage current
Channel on leakage current
0.22
-
0.25
-
V+ = 5.5 V, V- = -5.5 V
4.5 V
VS = 4.5 V, VD
VS = VD
=
1.5
-
10
-
nA
V
0.003
0.5
=
4.5 V
2
35
Digital Control
Input, high voltage
Input, low voltage
VINH
VINL
-
-
-
-
-
-
-
2
0.8
-
Min.
Max.
Typ.
Max.
Typ.
0.001
-
Input leakage
IIN
VIN = VGND or V+
μA
pF
0.1
-
Digital input capacitance
CIN
3.5
Dynamic Cꢇaracteristics
110
-
-
-
Typ.
Min.
Typ.
Max.
Typ.
Max.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
VS1= VS2 = 3 V
RL= 300 , CL = 35 pF
Break-before-make time
Turn-on time
tOPEN
tON
-
65
280
330
180
220
7
-
-
ns
400
440
VS = 3 V
RL = 300 , CL = 35 pF
-
-
Turn-off time
tOFF
260
280
Charge injection
Off isolation
QINj
CL = 1 nF, RGEN = 0 , VS = 0 V
RL = 50 , CL = 5 pF, 100 kHz
RL = 50 , CL = 5 pF, 1 MHz
f = 1 MHz, RL = 50 , CL = 5 pF
RL = 50 , CL = 5 pF
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
pC
dB
OIRR
XTALK
-78
-106
-0.26
160
34
Cross talk
Insertion loss
%
Bandwidth, -3 dB
Source off capacitance
Drain off capacitance
Drain on capacitance
ꢅoꢆer Reqꢄirements
Power supply range
BW
MHz
CS(off)
CD(off)
CD(on)
f = 1 MHz, VS = 0 V
31
pF
94
GND = 0 V
4.5 V min. / 16.5 max.
V
0.001
-
-
-
-
-
1
-
Typ.
Max.
Typ.
Max.
Digital inputs 0 V or V+
V+ = 5.5 V, V- = -5.5 V
I+
I-
-
0.001
-
Power supply current
μA
Digital inputs = 0 V or V+
1
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
6
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
Axis Title
Axis Title
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
10000
1000
100
3
2
1
0
10000
1000
100
V
=
4.5 V
V
=
5 V
+125 °C
+85 °C
V
=
7 V
V
=
12 V
V
=
10 V
+25 °C
-40 °C
V
=
15 V
V
=
13.5 V
V
=
16.5 V
V
=
15 V
IS = -10 mA
I
S = -10 mA
10
10
-18 -14 -10 -6 -2
2
6
10 14 18
-15
-10
-5
0
5
10
15
VD - Analog Voltage (V)
2nd line
VD - Analog Voltage (V)
2nd line
On-Resistance vs. Analog ꢀoltage
On-Resistance vs. Pemperatꢄre
Axis Title
V+ = +5 V
Axis Title
+125 °C
6
5
4
3
2
1
0
10000
1000
100
4
3
2
1
0
10000
1000
100
V+ = +8 V
V+ = +10.8 V
+85 °C
+25 °C
V+ = +12 V
V+ = +13.2 V
V+ = +15 V
V+ = +18 V
-40 °C
V+ = +24 V
V+ = +12 V
S = -10 mA
IS = -10 mA
I
10
10
0
5
10
15
20
0
1
2
3
4
5
6
7
8
9
10 11 12
VD - Analog Voltage (V)
2nd line
VD - Analog Voltage (V)
2nd line
On-Resistance vs. Analog ꢀoltage
On-Resistance vs. Pemperatꢄre
Axis Title
Axis Title
10
5
10000
1000
100
5
4
3
2
1
0
10000
1000
100
IS(OFF), VS = -10 V
+125 °C
+85 °C
ID(OFF), VD = 10 V
ID(ON), VD = 10 V
0
IS(OFF), VS = 10 V
-5
+25 °C
-40 °C
ID(OFF), VD = -10 V
ID(ON), VD = -10 V
-10
-15
-20
-25
V
=
5 V
V
=
15 V
0
I
S = -10 mA
10
10
-40 -20
20 40 60 80 100 120
-5 -4 -3 -2 -1
0
1
2
3
4
5
Temperature (°C)
2nd line
VD - Analog Voltage (V)
2nd line
Leakage Cꢄrrent vs. Pemperatꢄre
On-Resistance vs. Pemperatꢄre
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
7
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
Axis Title
Axis Title
300
250
200
150
100
50
10000
1000
100
10
5
10000
1000
100
I+ per logic input
IS(OFF), VS = 1 V
ID(OFF), VD = 10 V
IS(OFF), VS = 10 V
0
V
=
16.5 V
-5
ID(OFF), VD = 1 V
ID(ON), VD = 10 V
ID(ON), VD = 1 V
-10
-15
-20
-25
V+ = +13.2 V
V- = 0 V
V
=
5.5 V
V+ = +12 V
-40 -20
10
0
10
0
20 40 60 80 100 120
0
2
4
6
8
10
12
14
Temperature (°C)
2nd line
VIN (V)
2nd line
Leakage Cꢄrrent vs. Pemperatꢄre
Iꢂ - dꢄpply Cꢄrrent vs. Logic Level
Axis Title
Axis Title
10
5
10000
1000
100
250
200
150
100
50
10000
1000
100
IS(OFF), VS = -4.5 V
V+ = +12 V, VS = +8 V, tON
ID(OFF), VD = 4.5 V
IS(OFF), VS = 4.5 V
0
ID(OFF), VD = -4.5 V
V
=
15 V
-5
VS = +10 V, tON
ID(ON), VD = 4.5 V
ID(ON), VD = -4.5 V
-10
-15
-20
-25
V+ = +12 V, VS = +8 V, tOFF
V
=
5 V
V
=
15 V, VS = +10 V, tOFF
10
0
10
-40 -20
0
20 40 60 80 100 120
-40 -20
0
20 40 60 80 100 120
Temperature (°C)
2nd line
Temperature (°C)
2nd line
Leakage Cꢄrrent vs. Pemperatꢄre
dꢆitcꢇing Pime vs. Pemperatꢄre
Axis Title
Axis Title
Loss
150
100
50
10000
1000
100
10
0
10000
1000
100
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
V
=
15 V
V
=
5 V
OIRR
0
XTALK
-50
-100
-150
V+ = +12 V
V- = GND
V
=
15 V
1G
10
10
-15
-10
-5
0
5
10
15
100K
1M
10M
100M
VS - Analog Voltage (V)
2nd line
Frequency (Hz)
2nd line
Cꢇarge Injection vs. Analog ꢀoltage
BW, OIRR, XPALK vs. Freqꢄency
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
8
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
Axis Title
Axis Title
0.1
10000
1000
100
0.1
0.01
10000
1000
100
V
=
15 V
V
=
5 V
T
A = 25 °C
TA = 25 °C
VS = 10 Vp-p
VS = 20 Vp-p
0.01
VS = 5 Vp-p
VS = 15 Vp-p
VS = 2.5 Vp-p
VS = 10 Vp-p
0.001
10
20K
0.001
10
20K
10
200
2K
10
200
2K
Frequency (Hz)
2nd line
Frequency (Hz)
2nd line
PHD ꢂ N vs. Freqꢄency
PHD ꢂ N vs. Freqꢄency
Axis Title
2.0
1.8
1.6
1.4
1.2
1.0
10000
1000
100
VIH
VIL
10
4
6
8
10
12
14
16
V+ - Supply Voltage (V)
2nd line
Logic Pꢇresꢇolu vs. dꢄpply ꢀoltage
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
9
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG1411E, DG1412E, DG1413E
www.vishay.com
TEST CIRCUITS
Vishay Siliconix
V+
V+
V
INH
t
r
t
f
< 5 ns
< 5 ns
Logic
Input
50 %
V
INL
Switch Output
S
D
Switch
Input
V
OUT
0.9 x V
OUT
IN
GND
Switch
Output
R
300 Ω
C
L
35 pF
L
0 V
Logic
Input
t
t
OFF
ON
Logic "1" = Switch On
Logic input waveforms inverted for switches that have
the opposite logic sense.
C
L
(includes fixture and stray capacitance)
R
L
+ R
V
=
V
OUT
D
R
L
ON
Fig. 1 - dꢆitcꢇing Pime
V+
V+
V
OUT
R
gen
V
OUT
D
S
V
OUT
+
IN
IN
V
gen
V
C = 1 nF
L
On
On
Off
GND
Q =
V
x C
OUT L
= 0 - V+
IN
IN depends on switch configuration: input polarity
determined by sense of switch.
Fig. 2 - Cꢇarge Injection
V+
V+
V+
10 nF
10 nF
V+
S
D
0 V, 2.4 V
D
IN
Meter
IN
HP4192A
Impedance
Analyzer
0 V, 2.4 V
R
L
or Equivalent
GND
S
GND
f = 1 MHz
Analyzer
V
D
Off Isolation = 20 log
V
S
Fig. 3 - Off-Isolation
Fig. 4 - Cꢇannel OffꢁOn Capacitance
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?75104.
S17-0054-Rev. C, 23-Jan-17
Document Number: 75104
10
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
Vishay Siliconix
QFN 4x4-16L Case Outline
(5)
(4)
VARIATION 1
VARIATION 2
(1)
(1)
DIM
INCHES
INCHES
MILLIMETERS
MILLIMETERS
MIN.
NOM.
0.85
MAX.
0.95
0.05
MIN.
0.029
0
NOM.
0.033
MAX.
0.037
0.002
MIN.
0.75
0
NOM.
0.85
MAX.
0.95
0.05
MIN.
0.029
0
NOM.
0.033
MAX.
0.037
0.002
A
A1
A3
b
0.75
0
-
-
-
-
0.20 ref.
0.30
0.008 ref.
0.012
0.20 ref.
0.30
0.008 ref.
0.012
0.25
2.0
0.35
2.2
0.010
0.079
0.014
0.087
0.25
2.5
0.35
2.7
0.010
0.098
0.014
0.106
D
4.00 BSC
2.1
0.157 BSC
0.083
4.00 BSC
2.6
0.157 BSC
0.102
D2
e
0.65 BSC
4.00 BSC
2.1
0.026 BSC
0.157 BSC
0.083
0.65 BSC
4.00 BSC
2.6
0.026 BSC
0.157 BSC
0.102
E
2.2
0.7
0.087
0.028
2.7
0.5
0.106
0.020
E2
K
2.0
0.5
0.079
0.020
2.5
0.3
0.098
0.012
0.20 min.
0.008 min.
0.20 min.
0.008 min.
L
0.6
16
4
0.024
0.4
16
4
0.016
N(3)
Nd(3)
Ne(3)
16
4
16
4
4
4
4
4
Notes
(1)
(2)
(3)
(4)
(5)
(6)
Use millimeters as the primary measurement.
Dimensioning and tolerances conform to ASME Y14.5M. - 1994.
N is the number of terminals. Nd and Ne is the number of terminals in each D and E site respectively.
Dimensions b applies to plated terminal and is measured between 0.15 mm and 0.30 mm from terminal tip.
The pin 1 identifier must be existed on the top surface of the package by using identification mark or other feature of package body.
Package warpage max. 0.05 mm.
ECN: S13-0893-Rev. B, 22-Apr-13
DWG: 5890
Revision: 22-Apr-13
Document Number: 71921
1
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
TSSOP: 16-LEAD
DIMENSIONS IN MILLIMETERS
Symbols
Min
-
Nom
1.10
0.10
1.00
0.28
0.127
5.00
6.40
4.40
0.65
0.60
1.00
-
Max
1.20
0.15
1.05
0.38
-
A
A1
A2
B
0.05
-
0.22
-
C
D
4.90
6.10
4.30
-
5.10
6.70
4.50
-
E
E1
e
L
0.50
0.90
-
0.70
1.10
0.10
6°
L1
y
θ1
0°
3°
ECN: S-61920-Rev. D, 23-Oct-06
DWG: 5624
Document Number: 74417
23-Oct-06
www.vishay.com
1
PAD Pattern
Vishay Siliconix
www.vishay.com
RECOMMENDED MINIMUM PAD FOR TSSOP-16
0.193
(4.90)
0.055
(1.40)
0.012
(0.30)
0.026
0.014
(0.35)
(0.65)
Recommended Minimum Pads
Dimensions in inches (mm)
Revision: 02-Sep-11
Document Number: 63550
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明