DG9424EDQ-T1-GE3 [VISHAY]
On Resistance, 5 V, 12 V, and 3 V Quad SPST Switches;型号: | DG9424EDQ-T1-GE3 |
厂家: | VISHAY |
描述: | On Resistance, 5 V, 12 V, and 3 V Quad SPST Switches |
文件: | 总13页 (文件大小:262K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
1.6 On Resistance, 5 ꢀ, ꢁ12 ꢀ, anꢂ ꢁ+ ꢀ ꢃQaꢂ ꢄSꢄꢅ ꢄꢆitcꢇes
DESCRIPTION
FEATURES
The DG9424E, DG9425E, DG9426E are monolithic quad
single-pole-single-throw analog switches. The G9424E and
DG9425E differ only in that they respond to opposite logic
levels. The DG9426E has two normally open and two
normally closed switches. It can be given various
configurations, including four SPST, two SPDT, and one
DPDT.
• 3 V to 16 V single supply or ± 3 V thru ± ± V dual supply
operation
• 1.6 typical on resistance
• 3 V logic compatible for control
• Bi-directional rail to rail signal switching
• Fast switching speed
• < 0.2 nA switch on leakage
Using BiCMOS wafer fabrication technology allows the
DG9424E, DG9425E, and DG9426E to operate on single
and dual supplies. Single supply voltage ranges from 3 V to
16 V while dual supply operation is recommended with
± 3 V to ± ± V. Each switch conducts equally well in both
direction when on, and blocks input voltages up to the
supply levels when off.
• Break-before-make switching - DG9426
BENEFITS
• Wide operation voltage range
• Low signal errors and distortion
• Fast switching time
• Simple interfacing
The low and flat on resistance over the full input signal
voltage rang bring excellent linearity, reduce insertion loss
and signal distortion, make them ideal for data acquisition
and programmable gain control applications. These switch
characters also make them ideal fit for audio signal switch
and reed relay replacement.
APPLICATIONS
• Automatic test equipment
• Data acquisition systems
• Meters and instruments
• Medical and healthcare systems
• Communication systems
• Audio and video signal routing
• Relay replacement
The DG9424E, DG9425E, DG9426E feature low power
dissipation, fast switching speed, and low voltage logic
control threshold. Proprietary design enables the low charge
injection that minimize the switching transient.
Operation temperature is specified from -40 °C to +±5 °C.
The DG9424E, DG9425E, DG9426E are available in 16 lead
TSSOP packages.
• Battery powered systems
• Computer peripherals
• Audio and video signal routing
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG9424E / DG9425E
TSSOP
IN
IN
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
2
1
1
1
COM
COM
2
TRUTH TABLE
NC /NO
1
NC /NO
2
2
LOGIC
DG9424E
OFF
DG9425E
ON
V+
V-
GND
0
1
V
L
ON
OFF
NC /NO
3
NC /NO
3
4
4
4
COM
COM
3
IN
4
IN
3
Top View
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG9426E
TSSOP
IN
COM
NC
1
2
3
4
5
6
7
8
16 IN
2
1
1
1
COM
15
2
TRUTH TABLE
14 NO
LOGIC
ꢄW1, ꢄW4
ON
ꢄW2, ꢄW+
OFF
2
0
1
V-
V+
13
12
11
10
9
OFF
ON
GND
V
L
NC
4
NO
3
COM
IN
COM
3
4
4
IN
3
Top View
ORDERING INFORMATION
ꢅEMS. RANGE
SACKAGE
SARꢅ NUMBER
SARꢅ MARKING
9424E
ꢄꢅD SACK ꢃUANꢅIꢅY
Tape and Reel 3000 Units
Tape and Reel 3000 Units
Tape and Reel 3000 Units
DG9424EDQ-T1-GE3
DG9425EDQ-T1-GE3
DG9426EDQ-T1-GE3
-40 °C to +±5 °C
16-Pin TSSOP
9425E
9426E
ABSOLUTE MAXIMUM RATINGS
SARAMEꢅER
LIMIꢅ
UNIꢅ
V+ to V-
-0.3 to +1±
GND to V-
1±
V
VL
(GND - 0.3) to (V+) + 0.3
IN, COM, NC, NO a
(V-) - 0.3 to (V+) + 0.3
Continuous Current (NO, NC, COM Pins)
100
200
mA
Peak Current, S or D (Pulsed 1 ms, 10 % Duty Cycle)
Storage Temperature
Power Dissipation (Package) b
Thermal Resistance b
ESD Human Body Model (HBM); per ANSI / ESDA / JEDEC® JS-001
-65 to +150
450
°C
mW
°C/W
V
16-Pin TSSOP c
17±
>1500
400
Latch Up Current, per JESD7±D
mA
Notes
a. Signals on NC, NO, COM or IN exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current
ratings.
b. All leads welded or soldered to PC board.
c. Derate 7 mW/°C above 25 °C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
2
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a Single Supply 12 V
ꢅEꢄꢅ CONDIꢅIONꢄ UNLEꢄꢄ
LIMIꢅꢄ
OꢅHERWIꢄE ꢄSECIFIED
ꢀꢁ = 12 ꢀ, ꢀ- = 0 ꢀ
-40 °C to ꢁ85 °C
SARAMEꢅER
ꢄYMBOL
ꢅEMS. b
UNIꢅ
MIN. ꢂ ꢅYS. c MAX. ꢂ
ꢀL = 5 ꢀ, ꢀIN = 2.4 ꢀ, 0.8 ꢀ f
Analog ꢄꢆitcꢇ
Analog Signal Range e
VANALOG
RON
Full
Room
Full
0
-
-
1.6
-
12
3
V
V+ = 10.± V, V- = 0 V
NO, INC = 50 mA, VCOM = 2/9 V
On-Resistance
I
-
4
Digital Control
Input Current
IINL or IINH
Full
-1
0.01
1
μA
ns
Dynamic Cꢇaracteristics
Room
Full
-
-
-
-
36
-
51
65
35
44
Turn-On Time e
tON
RL = 300 , CL = 35 pF
V
NO, VNC = 5 V, see fig. 2
Room
Full
20
-
Turn-Off Time e
tOFF
DG9426E only, VNO, VNC = 5 V
Break-Before-Make Time Delay e
tD
Room
2
-
-
RL = 300 , CL = 35 pF
Charge Injection e
QINJ
OIRR
Vg = 0 V, Rg = 0 , CL = 1 nF
Room
Room
Room
-
-
-
3±
-56
-77
-
-
-
pC
dB
Off-Isolation e
RL = 50 , CL = 5 pF
f = 1 MHz
Channel-to-Channel Crosstalk e
XTALK
CNO(off)
CNC(off)
CCOM(off)
CCOM(on)
NO, NC Off Capacitance e
Room
-
49
-
f = 1 MHz
pF
COM Off Capacitance e
Channel On Capacitance e
Soꢆer ꢄQpplies
Room
Room
-
-
37
±9
-
-
Room
Full
-
-
0.02
1
5
-
Positive Supply Current
Negative Supply Current
Logic Supply Current
Ground Current
I+
I-
-
Room
Full
-1
-5
-
-0.002
-
-
VIN = 0 or VL
μA
Room
Full
0.002
1
5
-
IL
-
-
-0.002
-
Room
Full
-1
-5
IGND
-
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
+
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a Dual Supply ± 5 V
ꢅEꢄꢅ CONDIꢅIONꢄ UNLEꢄꢄ
LIMIꢅꢄ
OꢅHERWIꢄE ꢄSECIFIED
ꢀꢁ = 5 ꢀ, ꢀ- = 5 ꢀ
-40 °C to ꢁ85 °C
SARAMEꢅER
ꢄYMBOL
ꢅEMS.b
UNIꢅ
MIN. ꢂ ꢅYS. c MAX. ꢂ
ꢀL = 5 ꢀ, ꢀIN = 2.4 ꢀ, 0.8 ꢀ f
Analog ꢄꢆitcꢇ
Analog Signal Range e
VANALOG
RON
Full
Room
Full
-5
-
5
3.3
4.3
1
V
1.9
-
V+ = 4.5 V, V- = -4.5 V
On-Resistance
I
NO, INC = 50 mA
-
INO(off)
INC(off)
Room
Full
-1
-10
-1
-10
-1
-10
-
-
10
1
V+ = 5.5 V, V- = -5.5 V
COM = ± 4.5 V, VNO, VNC = ± 4.5 V
Switch Off Leakage Current
Channel On Leakage Current
V
Room
Full
-
ICOM(off)
nA
-
10
1
Room
Full
-
V+ = 5.5 V, V- = -5.5 V,
NO, VNC = VCOM = ± 4.5 V
ICOM(on)
V
-
10
Digital Control
Input Current a
IINL or IINH
Full
-1
0.05
1
μA
ns
Dynamic Cꢇaracteristics
Room
Full
-
-
-
-
4±
-
67
±1
57
67
Turn-On Time e
tON
RL = 300 , CL = 35 pF
NO, VNC = ± 3.5 V, see fig. 2
V
Room
Full
34
-
Turn-Off Time e
tOFF
DG9426E only, VNO, VNC = 3.5 V
Break-Before-Make Time Delay e
tD
Room
2
-
-
RL = 300 , CL = 35 pF
Charge Injection e
QINJ
OIRR
XTALK
Vg = 0 V, Rg = 0 , CL = 1 nF
Room
Room
Room
-
-
-
112
-56
-±2
-
-
-
pC
dB
Off Isolation e
RL = 50 , CL = 5 pF, f = 1 MHz
Channel-to-Channel Crosstalk e
CNO(off)
CNC(off)
Source Off Capacitance e
Room
-
3±
-
f = 1 MHz
pF
Drain Off Capacitance e
Channel On Capacitance e
Soꢆer ꢄQpplies
CCOM(off)
CCOM(on)
Room
Room
-
-
3±
±9
-
-
Room
Full
-
-
0.03
1
5
-
Positive Supply Current e
Negative Supply Current e
Logic Supply Current e
Ground Current e
I+
I-
-
Room
Full
-1
-5
-
-0.002
-
-
VIN = 0 or VL
μA
Room
Full
0.002
1
5
-
IL
-
-
-0.002
-
Room
Full
-1
-5
IGND
-
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
4
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a Single Supply 5 V
ꢅEꢄꢅ CONDIꢅIONꢄ UNLEꢄꢄ
LIMIꢅꢄ
OꢅHERWIꢄE ꢄSECIFIED
ꢀꢁ = 5 ꢀ, ꢀ- = 0 ꢀ
-40 °C to ꢁ85 °C
SARAMEꢅER
ꢄYMBOL
ꢅEMS.b
UNIꢅ
MIN. ꢂ ꢅYS. c MAX. ꢂ
ꢀL = 5 ꢀ, ꢀIN = 2.4 ꢀ, 0.8 ꢀ f
Analog ꢄꢆitcꢇ
Analog Signal Range e
VANALOG
RON
Full
Room
Full
-
-
-
-
3.1
-
5
V
4.±
5.±
On-Resistance e
V+ = 4.5 V, INO, INC = 50 mA
Dynamic Cꢇaracteristics
Turn-On Time e
Room
Hot
-
-
-
-
62
-
7±
106
44
tON
RL = 300 , CL = 35 pF
NO, VNC = 3.5 V, see fig. 2
V
Room
Hot
29
-
ns
Turn-Off Time e
tOFF
56
DG9426E only, VNO, VNC = 3.5 V
Break-Before-Make Time Delay e
tD
Room
Room
5
-
-
-
-
RL = 300 , CL = 35 pF
Charge Injection e
QINJ
Vg = 0 V, Rg = 0 , CL = 1 nF
10
pC
Soꢆer ꢄQpplies
Room
Hot
-
-
0.02
1
5
-
Positive Supply Current e
Negative Supply Current e
Logic Supply Current e
Ground Current e
I+
I-
-
Room
Hot
-1
-5
-
-0.002
-
-
VIN = 0 or VL
μA
Room
Hot
0.002
1
5
-
IL
-
-
-0.002
-
Room
Hot
-1
-5
IGND
-
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
5
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a Single Supply 3 V
ꢅEꢄꢅ CONDIꢅIONꢄ UNLEꢄꢄ
LIMIꢅꢄ
OꢅHERWIꢄE ꢄSECIFIED
ꢀꢁ = + ꢀ, ꢀ- = 0 ꢀ
-40 °C to ꢁ85 °C
SARAMEꢅER
ꢄYMBOL
ꢅEMS.b
UNIꢅ
MIN. ꢂ ꢅYS. c MAX. ꢂ
ꢀL = + ꢀ, ꢀIN = 2.4 ꢀ, 0.4 ꢀ f
Analog ꢄꢆitcꢇ
Analog Signal Range e
VANALOG
RON
Full
Room
Full
0
-
-
6
-
-
-
-
-
-
-
3
-
V
V+ = 2.7 V, V- = 0 V
NO, INC = 5 mA, VCOM = 0.5, 2.2 V
On-Resistance
I
-
-
INO(off)
INC(off)
Room
Full
-1
-10
-1
-10
-1
-10
1
10
1
V+ = 3.3 V, V- = 0 V
COM = 0.3, 3 V, VNO, VNC = 3, 0.3 V
Switch Off Leakage Current a
Channel On Leakage Current a
V
Room
Full
ICOM(off)
nA
10
1
Room
Full
V+ = 3.3 V, V- = 0 V,
NO, VNC = VCOM = 0.3, 3 V
ICOM(on)
V
10
Digital Control e
Input Current
IINL or IINH
Full
-1
0.005
1
μA
ns
Dynamic Cꢇaracteristics
Room
Full
-
-
-
-
140
-
-
193
-
Turn-On Time
tON
RL = 300 , CL = 35 pF
NO, VNC = 1.5 V, see fig. 2
V
Room
Full
65
-
Turn-Off Time
tOFF
±9
DG9426E only, VNO, VNC = 1.5 V
Break-Before-Make Time Delay
tD
Room
5
RL = 300 , CL = 35 pF
Charge Injection e
QINJ
OIRR
Vg = 0 V, Rg = 0 , CL = 1 nF
Room
Room
Room
-
-
-
15
-56
-±0
-
-
-
pC
dB
Off Isolation e
RL = 50 , CL = 5 pF
f = 1 MHz
Channel-to-Channel Crosstalk e
XTALK
CNO(off)
CNC(off)
CCOM(off)
CCOM(on)
Source Off Capacitance e
Room
-
53
-
f = 1 MHz
pF
Drain Off Capacitance e
Room
Room
-
-
42
92
-
-
Channel On Capacitance e
Notes
a. Leakage parameters are guaranteed by worst case test conditions and not subject to production test.
b. Room = 25 °C, Full = As determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet.
e. Guaranteed by design, not subject to production test.
f.
VIN = Input voltage to perform proper function.
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
6
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
10
9
±
7
6
5
4
3
2
1
0
12
10
±
V+/- = 2.7/0 V
S = 50 mA
TA = 25 °C
S = -1 mA
V+ = 2.7V, V- = 0V
I
I
V+ = 4.5V, V- = 0V
V+ = 7.2V, V- = 0V
V+ = 10.±V, V- = 0V
V+ = 14.4V, V- = 0V
+±5 °C
6
4
-40 °C
+25 °C
2
0
0
2
4
6
±
10
12
14
16
0
1
2
3
VCOM - Analog Voltage (V)
VCOM - Analog Voltage (V)
RON vs. ꢀCOM anꢂ ꢄQpply ꢀoltage
RON vs. Analog ꢀoltage anꢂ ꢅemperatQre
±
120
110
100
90
±0
70
60
50
40
30
20
10
0
V+ = ± 5 V
Is = 50 mA
VSUPPLY = ± 5V
7
6
5
4
3
2
1
0
tON Vs = -3.5 V
tOFF Vs = -3.5 V
tON Vs = +3.5 V
tOFF Vs = +3.5 V
+±5C
-40C
-4
+25C
-2
-5
-3
-1
0
1
2
3
4
5
-60 -40 -20
0
20 40 60 ±0 100 120 140
Temperature (°C)
VCOM - Analog Voltage (V)
RON vs. Analog ꢀoltage anꢂ ꢅemperatQre
ꢄꢆitcꢇing ꢅime vs. ꢅemperatQre anꢂ DQal ꢄQpply ꢀoltage
200.0
1±0
150
120
90
V+ = 5 V
V- = -5 V
150.0
tON V+ = 3 V
100.0
50.0
tON V+ = 5 V
tOFF V+ = 3 V
0
tON V+ = 12 V
-50.0
-100.0
-150.0
-200.0
tOFF V+ = 5 V
60
tOFF V+ = 12 V
30
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
-40
-20
0
20
40
60
±0
100 120
Temperature (°C)
VCOM, VNO, VNC - Analog Voltage (V)
ꢄꢆitcꢇing ꢅime vs. ꢅemperatQre anꢂ ꢄingle ꢄQpply ꢀoltage
Leakage CQrrent vs. Analog ꢀoltage
Document Number: 75770
S16-0320-Rev. A, 29-Feb-16
7
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
100,000
10,000
1,000
100
5.0
V+ = +5.5 V
V- = -5.5 V
-40 °C to +85 °C
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
VL = V+
ID(ON)
ID(OFF)
VINH
IS(OFF)
VINL
10
1
-60 -40 -20
0
20 40 60 ±0 100 120 140
2
4
6
±
10
12
14
Temperature (°C)
V+ - Supply Voltage (V)
Leakage CQrrent vs. ꢅemperatQre
ꢄꢆitcꢇing ꢅꢇresꢇolꢂ vs. ꢄQpply ꢀoltage
10
0
100000
10000
1000
100
V+ = +5 V
V- = -5 V
Insertion Loss
-10
-20
-30
-40
-50
-60
-70
-±0
-90
-100
-110
Off Isolation
10
1
Crosstalk
0.1
V+ = 3 V
V- = 0 V
0.01
0.001
R
L = 50
100K
1M
10M
100M
1G
10
100
1000
10K
100K
1M
10M
Input Switching Frequency (Hz)
Frequency (Hz)
ꢄꢆitcꢇing CQrrent vs. InpQt ꢄꢆitcꢇing FreqQency
Insertion Loss, Off Isolation anꢂ Crosstalk vs. FreqQency
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
8
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
Vishay Siliconix
SCHEMATIC DIAGRAM (typical channel)
V+
V
L
S
Level
Shift/
Drive
V
IN
D
GND
V-
Fig. 1
TEST CIRCUITS
V
t < 5 ns
r
t < 5 ns
f
V
L
V+
V+
INH
Logic
Input
50 %
V
INL
V
L
t
OFF
NO or NC
COM
V
IN
V
OUT
V
0.9 x V
OUT
OUT
90 %
IN
GND
R
300 Ω
C
L
35 pF
L
0 V
V-
V-
Switch
Output
t
ON
Switch
C
(includes fixture and stray capacitance)
L
R
L
Note: Logic input waveform is inverted for switches that
have the opposite logic sense control
V
OUT
= V
IN
R
L
+ r
ON
Fig. 2 - ꢄꢆitcꢇing ꢅime
V
L
V+
3 V
0 V
Logic
Input
50 %
NO
COM
COM
1
1
V
V
IN1
V
V
O1
IN1
O1
IN
1
V
90 %
V
O2
NC
2
2
IN2
Switch
Output
0 V
V
IN2
IN
2
R
300 Ω
L1
C
L1
35 pF
V
O2
90 %
V-
V-
GND
R
300 Ω
L2
C
L2
0 V
Switch
Output
t
D
t
D
35 pF
C
L
(includes fixture and stray capacitance)
Fig. + - Break-Before-Make (DG9426E)
9
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9424E, DG9425E, DG9426E
www.vishay.com
TEST CIRCUITS
Vishay Siliconix
ΔV
O
V
V+
V+
L
V
O
V
L
IN
X
R
g
COM
NO or NC
OFF
OFF
ON
ON
OFF
OFF
V
OUT
IN
C
V
g
L
10 nF
V-
V-
GND
IN
X
Q = ΔV x C
O
L
IN dependent on switch configuration Input polarity determined
X
V
IN
= 0 - V+
by sense of switch.
Fig. 4 - Cꢇarge Injection
V
L
V+
C
C
V
L
V+
NO
COM
V
S
1
1
2
R
g
= 50 Ω
50 Ω
IN
1
0 V, 2.4 V
NC
NO
COM
2
V
OUT
R
L
IN
2
0 V, 2.4 V
GND
V-
V-
C
V
OUT
X
TALK
Isolation = 20 log
V
IN
C = RF bypass
Fig. 5 - Crosstalk
V
L
V+
V+
V
V
L
V+
V+
C
C
C
C
V
L
V
OUT
NO or NC
COM
V
IN
L
COM
R
g
= 50 Ω
R
50 Ω
L
Meter
IN
0 V, 2.4 V
IN
HP4192A
Impedance
Analyzer
GND
V-
V-
C
0 V, 2.4 V
or Equivalent
NO or NC
V-
GND
C
V
OUT
Off Isolation = 20 log
C = RF Bypass
V
IN
V-
Fig. 7 - ꢄoQrce/Drain Capacitances
Fig. 6 - Off-Isolation
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?75770.
S16-0320-Rev. A, 29-Feb-16
Document Number: 75770
10
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
TSSOP: 16-LEAD
DIMENSIONS IN MILLIMETERS
Symbols
Min
-
Nom
1.10
0.10
1.00
0.28
0.127
5.00
6.40
4.40
0.65
0.60
1.00
-
Max
1.20
0.15
1.05
0.38
-
A
A1
A2
B
0.05
-
0.22
-
C
D
4.90
6.10
4.30
-
5.10
6.70
4.50
-
E
E1
e
L
0.50
0.90
-
0.70
1.10
0.10
6°
L1
y
θ1
0°
3°
ECN: S-61920-Rev. D, 23-Oct-06
DWG: 5624
Document Number: 74417
23-Oct-06
www.vishay.com
1
PAD Pattern
Vishay Siliconix
www.vishay.com
RECOMMENDED MINIMUM PAD FOR TSSOP-16
0.193
(4.90)
0.055
(1.40)
0.012
(0.30)
0.026
0.014
(0.35)
(0.65)
Recommended Minimum Pads
Dimensions in inches (mm)
Revision: 02-Sep-11
Document Number: 63550
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明