EB41-S0C1260W [VISHAY]
CONN EDGE DUAL FMALE 24POS 0.100;
| 型号： | EB41-S0C1260W |
| 厂家： | 
VISHAY |
| 描述： | CONN EDGE DUAL FMALE 24POS 0.100 |
| 文件： | 总4页 (文件大小：166K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EB4
Vishay Dale
www.vishay.com
Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,
Standard and Right Angle Terminals
FEATURES
• Grid patterns: 0.100" C-C x 0.150" (2.54 mm x 3.81 mm)
and 0.100" C-C x 0.200" (2.54 mm x 5.08 mm)
• Standard and right angle terminals
• Greater design latitude:
body materials: glass-filled polyester and glass-filled
polyphenylene sulfide
7 contact termination styles - 3 standard, 4 right angle
20 body sizes and 6 mounting styles
• Selective gold plating
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of contact position
ELECTRICAL SPECIFICATIONS
Current Rating: 3 A
Test Voltage Between Contacts:
at sea level: 650 VRMS
APPLICATIONS
For use with 0.0625" (1.59 mm) printed circuit boards
requiring an edgeboard type connector on 0.100" (2.54 mm)
centers
At 70 000 feet (21 336 meters): 275 VRMS
Insulation Resistance: 5000 M minimum at 500 VDC
potential
MATERIAL SPECIFICATIONS
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Body Material:
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
Operating Temperature: -65 °C to +125 °C
Humidity: 96 h at 90 % relative humidity at +40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 M
Durability: after 500 cycles of insertion and withdrawal of a
0.070" (1.78 mm) thick steel test board, contact resistance
less than 0.030 V at 3 A on gold plated contacts and
individual contact pair separation force when measured with
a 0.054" (1.37 mm) thick steel test blade was greater than
½ oz.
”5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94 V-0)
Contacts: phosphor bronze (see Ordering Information)
Polarizing Key: glass reinforced nylon, flame retardant
(UL 94H-B)
Plating: gold (see Ordering Information)
Shock: three 50G shocks in each of
perpendicular planes with no loss of continuity
3 mutually
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
ORDERING INFORMATION
EB4
3
K
20
SG
X
15
MODEL
BODY
MATERIAL
STANDARD CONTACTS
CONTACT PLATING
MOUNTING
VARIATIONS
POLARIZING
KEY POSITIONS
TERMINAL
PER SIDE
VARIATIONS
SG = selective gold plating (0.00003"
6, 10, 12, (0.000762 mm) minimum thick) on contact
3 = glass-filled
polyester
5 = glass-filled
polyphenylene
sulfide
Key(s) are located to
right of position(s)
C, D, K,
1R, 2R,
3R, 4R
15, 18, 20,
22, 25, 28,
area with gold flash on terminal.
SGF = selective gold plating (0.000010"
designated. Use odd-
numbered contact for
ordering: -1, -3, -5, etc.
Required only when
polarizing keys are to be
factory installed.
Note: to order polarizing
keys individually, specify
model PK-4.
30, 31, 35, (0.000254 mm) minimum thick) on contact
36, 40, 43,
44, 48, 49,
50, 60,
area with gold flash on terminal.
All gold plating over 0.00005"
(0.00127 mm) minimum nickel underplate.
Contact factory for additional plating
options
and 65
Revision: 16-Feb-09
Document Number: 36001
1
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EB4
Vishay Dale
www.vishay.com
DIMENSIONS in inches (millimeters)
0.060
(1.52)
R Typ.
0.342
(8.69)
Typ.
0.050
(1.27)
Typ.
0.287
(7.29)
A
B
C
0.100
(2.54)
Typ.
D
E
J
J
0.060
(1.52)
Typ.
See table for
0.365
(9.27)
contact and
0.250
(6.35)
Typ.
Section J - J
mounting variations
0.180
(4.57)
Typ.
0.054 - 0.071 (1.37 - 1.80)
Card Thickness
0.430
(10.92)
Typ.
0.125
(3.17)
0.300 (7.62)
Depth of
Insertion
0.610 (15.49)
Typ.
Point of
Contact
0.150 (3.81)
Polarizing Key:
When ordering polarizing keys individually,
specify by the Model Number:
0.295
(7.49)
PK-4 between contacts. Hand insertion tool,
TPK-4, provided upon request.
0.031
(0.787)
0.096 0.002
(2.44 0.051)
0.200
(5.08)
# OF CONTACT
POSITIONS
PER SIDE
A
B
C
D
E
6
1.435 (36.45)
1.835 (46.61)
2.035 (51.69)
2.335 (59.31)
2.635 (66.93)
2.835 (72.01)
3.035 (77.09)
3.335 (84.71)
3.635 (92.33)
3.835 (97.41)
3.935 (99.95)
4.335 (110.11)
4.435 (112.65)
4.835 (122.81)
5.135 (130.43)
5.235 (132.97)
5.635 (143.13)
5.735 (145.67)
5.835 (148.21)
6.835 (173.61)
7.335 (186.31)
1.175 (29.85)
1.575 (40.00)
1.775 (45.08)
2.075 (52.70)
2.375 (60.32)
2.575 (65.40)
2.775 (70.48)
3.075 (78.10)
3.375 (85.72)
3.575 (90.80)
3.675 (93.34)
4.075 (103.50)
4.175 (106.04)
4.575 (116.20)
4.875 (123.82)
4.975 (126.36)
5.375 (136.52)
5.475 (139.06)
5.575 (141.60)
6.575 (167.00)
7.075 (179.70)
0.700 (17.78)
1.100 (27.94)
1.300 (33.02)
1.600 (40.64)
1.900 (48.26)
2.100 (53.34)
2.300 (58.42)
2.600 (66.04)
2.900 (73.66)
3.100 (78.74)
3.200 (81.28)
3.600 (91.44)
3.700 (93.98)
4.100 (104.14)
4.400 (111.76)
4.500 (114.30)
4.900 (124.46)
5.000 (127.00)
5.100 (129.54)
6.100 (154.94)
6.600 (167.64)
0.860 (21.84)
1.260 (32.00)
1.460 (37.08)
1.760 (44.70)
2.060 (52.32)
2.260 (57.40)
2.460 (62.48)
2.760 (70.10)
3.060 (77.72)
3.260 (82.80)
3.360 (85.34)
3.760 (95.50)
3.860 (98.04)
4.260 (108.20)
4.560 (115.82)
4.660 (118.36)
5.060 (128.52)
5.160 (131.06)
5.260 (133.60)
6.260 (159.00)
6.760 (171.70)
0.750 (19.05)
10
12
15
18
20
22
25
28
30
31
35
36
40
43
44
48
49
50
60
65
1.150 (29.21)
1.350 (34.29)
1.650 (41.91)
1.950 (49.53)
2.150 (54.61)
2.350 (59.69)
2.650 (67.31)
2.950 (74.93)
3.150 (80.01)
3.250 (82.55)
3.650 (92.71)
3.750 (95.25)
4.150 (105.41)
4.450 (113.03)
4.550 (115.57)
4.950 (125.73)
5.050 (128.27)
5.150 (130.81)
6.150 (156.21)
6.650 (168.91)
Revision: 16-Feb-09
Document Number: 36001
2
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EB4
Vishay Dale
www.vishay.com
PHYSICAL SPECIFICATIONS
Contact Type: bifurcated cantilever beam
Type “3R” - dip solder, 0.025" (0.635 mm) square
terminals, 0.180" (4.57 mm) nominal terminal length x 0.150"
(3.81 mm) nominal terminal row spacing
Number of Contacts: 10, 12, 15, 18, 20, 22, 25, 28, 30, 31,
35, 36, 40, 43, 44, 48, 49, 50, 60 and 65 per side
Type “4R” - dip solder, 0.025" (0.635 mm) square
terminals, 0.180" (4.57 mm) nominal terminal length x 0.200"
(5.08 mm) nominal terminal row spacing
Contact Terminal Variation: Standard terminals
Type “C” - dip solder, 0.025" (0.635 mm) square terminals,
0.175" (4.44 mm) nominal terminal length below standoffs
Contact Spacing: 0.100" (2.54 mm) center to center
Type “D” - dip solder, 0.025" (0.635 mm) square terminals,
0.115" (2.92 mm) nominal terminal length below standoffs
Contact Terminal Row Spacing: Standard - 0.200"
(5.08 mm) nominal. Right angle - 0.200" (5.08 mm) nominal
and 0.150" (3.81 mm) nominal
Type “K” - Wire Wrap™, 0.025" (0.635 mm) square
terminals, 0.570" (14.48 mm) nominal terminal length below
standoffs
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Card Slot Depth: 0.300" (7.62 mm)
Contact Terminal Variation: Right angle terminals
Connector Polarization: between contact polarization
key(s) are located to the right of the contact position(s)
designated
Type “1R” - dip solder, 0.025" (0.635 mm) square
terminals, 0.120" (3.05 mm) nominal terminal length x 0.150"
(3.81 mm) nominal terminal row spacing
Note
•
Type “2R” - dip solder, 0.025" (0.635 mm) square
terminals, 0.120" (3.05 mm) nominal terminal length x 0.200"
(5.08 mm) nominal terminal row spacing
High temperature burn-in, edgeboard connectors, with 0.100"
(2.54 mm) center to center are on www.vishay.com/doc?36006
MOUNTING VARIATIONS in inches (millimeters)
Type “X”
Type “XF”
Clearance Hole
Flush Mounting Flange
Type “XS”
Right Angle
Mounting Flange
Type “XFS”
Right Angle
Mounting Flange
Clearance Hole
Raised Mounting Flange
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.125
(3.17)
Dia.
0.125
(3.17)
Dia.
0.125
(3.17)
0.125
(3.17)
Dia.
0.125
(3.17)
0.430
Dia.
0.250
(6.35)
0.250
(6.35)
0.250
(6.35)
0.125 (3.17)
0.250 (6.35)
0.430
(10.92)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
(10.92)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
Type “Y”
Type “YF”
Type “W”
No Mounting Flange
Threaded Insert
Threaded Insert
Raised Mounting Flange
Flush Mounting Flange
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.180 (4.57)
4-40
0.430
(10.92)
UNC-2B
4-40
UNC-2B
0.610
(15.49)
Ref.
0.250
(6.35)
0.250
(6.35)
0.430
(10.92)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
TERMINAL VARIATIONS in inches (millimeters)
TYPE
A
B
Type “1R”, “2R”, “3R” and “4R”
Type “C” and “D”
Solder Dip, Standard
Type “K”
Right Angle
Wire Wrap™, Standard
0.025 (0.635) Square Terminals
0.150 0.120 0.030
(3.81) (3.05 0.762)
1R
2R
3R
4R
0.025 (0.635) Square Terminals
B
0.025 (0.635) Square Terminals
0.200
(5.08)
0.200 (5.08)
0.200 0.120 0.030
(5.08) (3.05 0.762)
To Fit
0.590
(14.99)
0.050 0.002
(1.27 0.051)
Dia. Eyelet
0.150 0.180 0.030
(3.81) (4.57 0.762)
A
0.200 0.180 0.030
(5.08) (4.57 0.762)
“C” = 0.175 (4.44)
“D” = 0.115 (2.92)
0.570 (14.48)
Revision: 16-Feb-09
Document Number: 36001
3
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明