EB453R60SGXS
更新时间：2024-10-30 04:52:11
品牌：VISHAY
描述：Card Edge Connector, 120 Contact(s), 2 Row(s), Female, Right Angle, Solder Terminal,
概述
规格参数
数据手册EB453R60SGXS 概述
Card Edge Connector, 120 Contact(s), 2 Row(s), Female, Right Angle, Solder Terminal, 单部分卡边缘连接器
EB453R60SGXS 规格参数
| 生命周期： | Active | Reach Compliance Code： | unknown |
| 风险等级： | 5.56 | 其他特性： | POLARIZED |
| 连接器类型： | CARD EDGE CONNECTOR | 联系完成配合： | GOLD (3) OVER NICKEL |
| 联系完成终止： | GOLD FLASH OVER NICKEL | 触点性别： | FEMALE |
| DIN 符合性： | NO | 滤波功能： | NO |
| IEC 符合性： | NO | JESD-609代码： | e4 |
| MIL 符合性： | NO | 混合触点： | NO |
| 安装方式： | RIGHT ANGLE | 安装类型： | BOARD |
| 装载的行数： | 2 | 选件： | GENERAL PURPOSE |
| 端子节距： | 2.54 mm | 端接类型： | SOLDER |
| 触点总数： | 120 | UL 易燃性代码： | 94V-0 |
EB453R60SGXS 数据手册
通过下载EB453R60SGXS数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载EB4
Vishay Dale
Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,
Standard and Right Angle Terminals
FEATURES
• Grid Patterns: 0.100" C-C x 0.150" (2.54 mm x 3.81 mm)
and 0.100" C-C x 0.200" (2.54 mm x 5.08 mm)
• Standard and right angle terminals
• Greater design latitude:
4 body materials: Diallyl phthalate, phenolic, glass-filled
polyester and glass-filled polyphenylene sulfied
7 contact termination styles - 3 standard, 4 right angle
20 body sizes and 6 mounting styles
• Selective gold plating
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of contact position.
ELECTRICAL SPECIFICATIONS
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
Current Rating: 3 A
Test Voltage Between Contacts:
At sea level: 650 VRMS
At 70 000 feet (21 336 meters): 275 VRMS
APPLICATIONS
For use with 0.0625" (1.59 mm) printed circuit boards
requiring an edgeboard type connector on 0.100" (2.54 mm)
centers
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Operating Temperature: - 65 °C to + 125 °C
MATERIAL SPECIFICATIONS
Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 MΩ
Body Material:
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94 V-0)
Durability: After 500 cycles of insertion and withdrawal of a
0.070" (1.78 mm) thick steel test board, contact resistance
less than 0.030 V at 3 A on gold plated contacts and
individual contact pair separation force when measured with
a 0.054" (1.37 mm) thick steel test blade was greater than
½ oz.
“2” glass-filled phenolic per MIL-M-14, Type MFH dark
green, flame retardant (UL 94 V-0)
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
”5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94 V-0)
Shock: Three 50G shocks in each of
3 mutually
Contacts: Phosphor bronze (See Ordering Information)
perpendicular planes with no loss of continuity
Polarizing Key: Glass reinforced nylon, flame retardant
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
(UL 94H-B)
Plating: Gold (See Ordering Information)
ORDERING INFORMATION
EB4
3
K
20
SG
X
15
MODEL
BODY
MATERIAL
STANDARD CONTACTS
CONTACT PLATING
MOUNTING
VARIATIONS
POLARIZING
KEY POSITIONS
TERMINAL
PER SIDE
VARIATIONS
SG = Selective gold plating (0.00003"
6, 10, 12, (0.000762 mm) minimum thick) on contact
1 = Diallyl
Phthalate
2 = Phenolic
3 = Glass-filled
Polyester
5 = Glass-filled
Polyphenylene
Sulfied
Key(s) are located to
right of position(s)
C, D, K,
1R, 2R,
3R, 4R
15, 18, 20,
22, 25, 28,
area with gold flash on terminal.
SGF = Selective gold plating (0.000010"
designated. Use odd-
numbered contact for
ordering: -1, -3, -5, etc.
Required only when
polarizing keys are to be
factory installed.
Note: To order polarizing
keys individually, specify
model PK-4.
30, 31, 35, (0.000254 mm) minimum thick) on contact
36, 40, 43,
44, 48, 49,
50, 60,
area with gold flash on terminal.
All gold plating over 0.00005"
(0.00127 mm) minimum nickel underplate.
Contact factory for additional plating
options.
and 65
www.vishay.com
2
For technical questions, contact: connectors@vishay.com
Document Number: 36001
Revision: 16-Feb-09
EB4
Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,
Standard and Right Angle Terminals
Vishay Dale
DIMENSIONS in inches (millimeters)
0.060
(1.52)
R Typ.
0.342
(8.69)
Typ.
0.050
(1.27)
Typ.
0.287
(7.29)
A
B
C
0.100
(2.54)
Typ.
D
E
J
J
0.060
(1.52)
Typ.
See table for
0.365
(9.27)
contact and
0.250
(6.35)
Typ.
Section J - J
mounting variations
0.180
(4.57)
Typ.
0.054 - 0.071 (1.37 - 1.80)
Card Thickness
0.430
(10.92)
Typ.
0.125
(3.17)
Point of
Contact
0.300 (7.62)
Depth of
Insertion
0.610 (15.49)
Typ.
0.150 (3.81)
Polarizing Key:
When ordering polarizing keys individually,
specify by the Model Number:
0.295
(7.49)
PK-4 between contacts. Hand insertion tool,
TPK-4, provided upon request.
0.031
(0.787)
0.200
(5.08)
0.096 0.002
(2.44 0.051)
# OF CONTACT
POSITIONS
PER SIDE
A
B
C
D
E
6
1.435 (36.45)
1.835 (46.61)
2.035 (51.69)
2.335 (59.31)
2.635 (66.93)
2.835 (72.01)
3.035 (77.09)
3.335 (84.71)
3.635 (92.33)
3.835 (97.41)
3.935 (99.95)
4.335 (110.11)
4.435 (112.65)
4.835 (122.81)
5.135 (130.43)
5.235 (132.97)
5.635 (143.13)
5.735 (145.67)
5.835 (148.21)
6.835 (173.61)
7.335 (186.31)
1.175 (29.85)
1.575 (40.00)
1.775 (45.08)
2.075 (52.70)
2.375 (60.32)
2.575 (65.40)
2.775 (70.48)
3.075 (78.10)
3.375 (85.72)
3.575 (90.80)
3.675 (93.34)
4.075 (103.50)
4.175 (106.04)
4.575 (116.20)
4.875 (123.82)
4.975 (126.36)
5.375 (136.52)
5.475 (139.06)
5.575 (141.60)
6.575 (167.00)
7.075 (179.70)
0.700 (17.78)
1.100 (27.94)
1.300 (33.02)
1.600 (40.64)
1.900 (48.26)
2.100 (53.34)
2.300 (58.42)
2.600 (66.04)
2.900 (73.66)
3.100 (78.74)
3.200 (81.28)
3.600 (91.44)
3.700 (93.98)
4.100 (104.14)
4.400 (111.76)
4.500 (114.30)
4.900 (124.46)
5.000 (127.00)
5.100 (129.54)
6.100 (154.94)
6.600 (167.64)
0.860 (21.84)
1.260 (32.00)
1.460 (37.08)
1.760 (44.70)
2.060 (52.32)
2.260 (57.40)
2.460 (62.48)
2.760 (70.10)
3.060 (77.72)
3.260 (82.80)
3.360 (85.34)
3.760 (95.50)
3.860 (98.04)
4.260 (108.20)
4.560 (115.82)
4.660 (118.36)
5.060 (128.52)
5.160 (131.06)
5.260 (133.60)
6.260 (159.00)
6.760 (171.70)
0.750 (19.05)
10
12
15
18
20
22
25
28
30
31
35
36
40
43
44
48
49
50
60
65
1.150 (29.21)
1.350 (34.29)
1.650 (41.91)
1.950 (49.53)
2.150 (54.61)
2.350 (59.69)
2.650 (67.31)
2.950 (74.93)
3.150 (80.01)
3.250 (82.55)
3.650 (92.71)
3.750 (95.25)
4.150 (105.41)
4.450 (113.03)
4.550 (115.57)
4.950 (125.73)
5.050 (128.27)
5.150 (130.81)
6.150 (156.21)
6.650 (168.91)
Document Number: 36001
Revision: 16-Feb-09
For technical questions, contact: connectors@vishay.com
www.vishay.com
3
EB4
Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,
Standard and Right Angle Terminals
Vishay Dale
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated cantilever beam
Type “3R” - dip solder, 0.025" (0.635 mm) square terminals,
0.180" (4.57 mm) nominal terminal length x 0.150" (3.81 mm)
nominal terminal row spacing
Number of Contacts: 10, 12, 15, 18, 20, 22, 25, 28, 30, 31,
35, 36, 40, 43, 44, 48, 49, 50, 60 and 65 per side
Type “4R” - dip solder, 0.025" (0.635 mm) square terminals,
0.180" (4.57 mm) nominal terminal length x 0.200" (5.08 mm)
nominal terminal row spacing
Contact Terminal Variation: Standard terminals
Type “C” - dip solder, 0.025" (0.635 mm) square terminals,
0.175" (4.44 mm) nominal terminal length below standoffs
Contact Spacing: 0.100" (2.54 mm) center to center
Type “D” - dip solder, 0.025" (0.635 mm) square terminals,
0.115" (2.92 mm) nominal terminal length below standoffs
Contact Terminal Row Spacing: Standard - 0.200"
(5.08 mm) nominal. Right angle - 0.200" (5.08 mm) nominal
and 0.150" (3.81 mm) nominal
Type “K” - Wire Wrap™, 0.025" (0.635 mm) square
terminals, 0.570" (14.48 mm) nominal terminal length below
standoffs
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Card Slot Depth: 0.300" (7.62 mm)
Contact Terminal Variation: Right angle terminals
Connector Polarization: Between contact polarization
key(s) are located to the right of the contact position(s)
designated
Type “1R” - dip solder, 0.025" (0.635 mm) square terminals,
0.120" (3.05 mm) nominal terminal length x 0.150" (3.81 mm)
nominal terminal row spacing
Note
•
Type “2R” - dip solder, 0.025" (0.635 mm) square terminals,
0.120" (3.05 mm) nominal terminal length x 0.200" (5.08 mm)
nominal terminal row spacing
High temperature burn-in, edgeboard connectors, with 0.100"
(2.54 mm) center to center are on www.vishay.com/doc?36006
MOUNTING VARIATIONS in inches (millimeters)
Type “X”
Type “XF”
Clearance Hole
Flush Mounting Flange
Type “XS”
Right Angle
Mounting Flange
Type “XFS”
Right Angle
Mounting Flange
Clearance Hole
Raised Mounting Flange
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.125
(3.17)
Dia.
0.125
(3.17)
Dia.
0.125
(3.17)
0.125
(3.17)
Dia.
0.125
(3.17)
0.430
Dia.
0.250
(6.35)
0.250
(6.35)
0.250
(6.35)
0.125 (3.17)
0.250 (6.35)
0.430
(10.92)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
(10.92)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
Type “Y”
Type “YF”
Type “W”
No Mounting Flange
Threaded Insert
Threaded Insert
Raised Mounting Flange
Flush Mounting Flange
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.180 (4.57)
4-40
0.430
(10.92)
UNC-2B
4-40
UNC-2B
0.610
(15.49)
Ref.
0.250
(6.35)
0.250
(6.35)
0.430
(10.92)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
TERMINAL VARIATIONS in inches (millimeters)
TYPE
A
B
Type “1R”, “2R”, “3R” and “4R”
Type “C” and “D”
Solder Dip, Standard
Type “K”
Right Angle
Wire Wrap™, Standard
0.025 (0.635) Square Terminals
0.150 0.120 0.030
(3.81) (3.05 0.762)
1R
2R
3R
4R
0.025 (0.635) Square Terminals
B
0.025 (0.635) Square Terminals
0.200
(5.08)
0.200 (5.08)
0.200 0.120 0.030
(5.08) (3.05 0.762)
To Fit
0.590
(14.99)
0.050 0.002
(1.27 0.051)
Dia. Eyelet
0.150 0.180 0.030
(3.81) (4.57 0.762)
A
0.200 0.180 0.030
(5.08) (4.57 0.762)
“C” = 0.175 (4.44)
“D” = 0.115 (2.92)
0.570 (14.48)
www.vishay.com
4
For technical questions, contact: connectors@vishay.com
Document Number: 36001
Revision: 16-Feb-09
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
EB453R60SGXS 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| EB453R60SGXS15 | VISHAY | Card Edge Connector, 120 Contact(s), 2 Row(s), Right Angle, 0.1 inch Pitch, Solder Terminal, Hole .125-.137, Brown Insulator, Receptacle, | 获取价格 |
|
| EB453R60SGY | VISHAY | CONNECTOR, 60 CONTACT(S), FEMALE, RIGHT ANGLE SINGLE PART CARD EDGE CONN, SOLDER | 获取价格 |
|
| EB453R65 | VISHAY | Edgeboard Connectors, Dual Readout, 0.100" [2.54mm] C-C, Standard and Right Angle Terminals | 获取价格 |
|
| EB453R65SG | VISHAY | Card Edge Connector, 130 Contact(s), 2 Row(s), Right Angle, Solder Terminal, Locking, Brown Insulator | 获取价格 |
|
| EB453R65SGFXF | VISHAY | Card Edge Connector, 65 Contact(s), 1 Row(s), Female, Right Angle, Solder Terminal, | 获取价格 |
|
| EB453R65SGFXFS15 | VISHAY | Card Edge Connector, 130 Contact(s), 2 Row(s), Right Angle, 0.1 inch Pitch, Solder Terminal, Hole .125-.137, Brown Insulator, Receptacle, | 获取价格 |
|
| EB453R65SGFXS | VISHAY | Card Edge Connector, 130 Contact(s), 2 Row(s), Female, Right Angle, Solder Terminal, | 获取价格 |
|
| EB453R65SGFXS15 | VISHAY | Card Edge Connector, 130 Contact(s), 2 Row(s), Right Angle, 0.1 inch Pitch, Solder Terminal, Hole .125-.137, Brown Insulator, Receptacle, | 获取价格 |
|
| EB453R65SGW15 | VISHAY | Card Edge Connector, 130 Contact(s), 2 Row(s), Right Angle, 0.1 inch Pitch, Solder Terminal, Brown Insulator, Receptacle, | 获取价格 |
|
| EB453R65SGXFS | VISHAY | CONNECTOR, 130 CONTACT(S), FEMALE, RIGHT ANGLE SINGLE PART CARD EDGE CONN, SOLDER | 获取价格 |
|
EB453R60SGXS 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
