首页 |元器件品牌

EB632R10 [VISHAY]

Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C, Standard and Right Angle Terminals; 边板连接器，双读数， 0.125“ [ 3.17毫米] CC ，标准和直角终端
EB632R10
型号： EB632R10
厂家： VISHAY    VISHAY
描述：

Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C, Standard and Right Angle Terminals
边板连接器，双读数， 0.125“ [ 3.17毫米] CC ，标准和直角终端

连接器
文件： 总4页 (文件大小：148K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
EB6  
Vishay Dale  
Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C,  
Standard and Right Angle Terminals  
FEATURES  
• Grid Patterns: 0.125" C-C x 0.150" [3.17mm x 3.81mm],  
0.125" C-C x 0.200" [3.17mm x 5.08mm] and  
0.125" C-C x 0.250" [3.17mm x 6.35mm].  
• Standard and right angle terminals.  
• Greater design latitude:  
3 body materials: Diallyl phthalate, phenolic, glass-filled  
polyester and glass-filled polyphenylene sulfied.  
7 contact termination styles: 3 standard, 4 right angle.  
19 body sizes and 6 mounting styles.  
• Selective gold plating.  
• Accepts PC board thickness of 0.054" to 0.071" [1.37mm  
to 1.80mm].  
• Polarization between contact positions in all sizes.  
Between contact polarization permits polarizing without loss  
of contact position.  
• Recognized under the Component Program of  
Underwriters Laboratories, Inc. Listed under File  
E65524, Project 77CH3889.  
ELECTRICAL SPECIFICATIONS  
Current Rating: 3 amps.  
Test Voltage Between Contacts:  
At sea level: 1500VRMS.  
At 70,000 feet [21,336 meters]: 325VRMS.  
Insulation Resistance: 5000 Megohm minimum at 500VDC  
potential.  
APPLICATIONS  
For use with 0.0625" [1.59mm] printed circuit boards requiring  
an edgeboard type connector on 0.125" [3.17mm] centers.  
Contact Resistance: 30 millivolts maximum at rated current  
(with gold plating).  
Operating Temperature: - 65°C to + 125°C.  
MATERIAL SPECIFICATIONS  
Body Material:  
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F  
green, flame retardant (UL 94V-0).  
Humidity: 96 hours at 90% relative humidity at + 40°C, dried  
at room temperature for 3 hours minimum, insulation  
resistance was greater than 5000 Megohm.  
Durability: After 500 cycles of insertion and withdrawal of a  
0.070" [1.78mm] thick steel test board, contact resistance less  
than 0.030V at 3 amps on gold plated contacts and individual  
contact pair separation force when measured with a 0.054"  
[1.37mm] thick steel test blade was greater than 1/2 ounce.  
Shock: Three 50g shocks in each of 3 mutually perpendicular  
planes with no loss of continuity.  
Vibration: 2 hours in each of 3 mutually perpendicular planes,  
frequency sweep 10 to 55cps at 0.06 double amplitude with  
no loss of continuity.  
“2” glass-filled phenolic per MIL-M-14, Type MFH dark green,  
flame retardant (UL 94V-0).  
“3” thermoplastic polyester, glass-filled, black, flame retardant  
(UL 94V-0).  
“5” thermoplastic polyphenylene sulfied, glass-filled, brown,  
flame retardant (UL 94V-0).  
Contacts: Phosphor bronze. (Ordering Information.)  
Polarizing Key: Glass reinforced nylon, flame retardant  
(UL94H-B).  
Plating: Gold. (Ordering Information.)  
ORDERING INFORMATION  
K
EB6  
3
40  
SG  
X
15  
STANDARD  
TERMINAL  
VARIATIONS  
MODEL  
BODY MATERIAL  
CONTACTS  
CONTACT PLATING  
MOUNTING  
VARIATIONS  
POLARIZING  
KEY POSITIONS  
SG = Selective Gold Plating  
C, D, K,  
1R, 2R,  
3R, 4R  
1 = Diallyl  
6, 10, 12,  
14, 15, 18,  
22, 24, 25,  
28, 30, 31,  
32, 35, 36,  
40, 43, 44,  
49 and 50  
per side.  
Key(s) are located to  
right of position(s)  
designated. Use odd-  
numbered contact for  
ordering: -1, -3, -5, etc.  
Required only when  
polarizing keys are to  
be factory installed.  
NOTE: To order  
(0.00003" [0.000762mm] minimum  
thick) on contact area with Gold  
Flash on terminal.  
SGF = Selective Gold Plating  
(0.000010" [0.000254mm] minimum  
thick) on contact area with Gold  
Flash on terminal.  
All Gold Plating over 0.00005"  
[0.00127mm] minimum Nickel  
Underplate.  
Contact factory for additional  
plating options.  
Phthalate  
2 = Phenolic  
3 = Glass-filled  
Polyester  
5 = Glass-filled  
Polyphenylene  
Sulfied  
polarizing keys  
individually, specify  
Model PK-6.  
For technical questions, contact Connectors@vishay.com  
Document Number 36002  
Revision 14-Aug-02  
www.vishay.com  
5
EB6  
Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C,  
Standard and Right Angle Terminals  
Vishay Dale  
DIMENSIONS in inches [millimeters]  
0.060  
[1.52]  
R Typ.  
0.060  
[1.52]  
Typ.  
0.260  
[6.60]  
0.340  
[8.64]  
Typ.  
A
B
C
0.125  
[3.17]  
Typ.  
D
E
J
J
0.060  
[1.52]  
Typ.  
See table for  
contact and  
mounting variations  
0.365  
[9.27]  
Section J-J  
0.250  
[6.35]  
Typ.  
0.054 - 0.071 [1.37 - 1.80]  
Card Thickness  
0.180  
[4.57]  
Typ.  
0.430  
[10.92]  
Typ.  
0.610 [15.49]  
Typ.  
0.125 [3.17]  
Point of  
Contact  
0.300 [7.62]  
Depth of  
Insertion  
0.150 [3.81]  
Polarizing Key:  
When ordering polarizing  
keys individually, specify  
by the Model Number:  
PK-6 between contacts.  
Hand insertion tool, TPK-6,  
provided upon request.  
0.295  
[7.49]  
0.031  
[0.787]  
0.250  
[6.35]  
0.096 ± 0.002 [2.44 ± 0.050]  
# OF CONTACT  
POSITIONS  
PER SIDE  
A
B
C
D
E
6
1.555 [39.50]  
2.055 [52.20]  
2.305 [58.55]  
2.555 [64.90]  
2.680 [68.07]  
3.055 [77.60]  
3.555 [90.30]  
3.805 [96.65]  
3.930 [99.82]  
4.305 [109.35]  
4.555 [115.70]  
4.680 [118.87]  
4.805 [122.05]  
5.180 [131.57]  
5.305 [134.75]  
5.805 [147.45]  
6.180 [156.97]  
6.305 [160.15]  
6.930 [176.02]  
7.055 [179.20]  
1.295 [32.89]  
1.795 [45.59]  
2.045 [51.94]  
2.295 [58.29]  
2.420 [61.47]  
2.795 [70.99]  
3.295 [83.69]  
3.545 [90.04]  
3.670 [93.22]  
4.045 [102.74]  
4.295 [109.09]  
4.420 [112.27]  
4.545 [115.44]  
4.920 [124.97]  
5.045 [128.14]  
5.545 [140.84]  
5.920 [150.37]  
6.045 [153.54]  
6.670 [169.42]  
6.795 [172.59]  
0.875 [22.22]  
1.375 [34.92]  
1.625 [41.28]  
1.875 [47.62]  
2.000 [50.80]  
2.375 [60.32]  
2.875 [73.02]  
3.125 [79.38]  
3.250 [82.55]  
3.625 [92.08]  
3.875 [98.42]  
4.000 [101.60]  
4.125 [104.78]  
4.500 [114.30]  
4.625 [117.48]  
5.125 [130.18]  
5.500 [139.70]  
5.625 [142.88]  
6.250 [158.75]  
6.375 [161.92]  
1.035 [26.29]  
1.535 [38.99]  
1.785 [45.34]  
2.035 [51.69]  
2.160 [54.86]  
2.535 [64.39]  
3.035 [77.09]  
3.285 [83.44]  
3.410 [86.61]  
3.785 [96.14]  
4.035 [102.49]  
4.160 [105.66]  
4.285 [108.84]  
4.660 [118.36]  
4.785 [121.54]  
5.285 [134.24]  
5.660 [143.76]  
5.785 [146.94]  
6.410 [162.81]  
6.535 [165.99]  
0.875 [22.22]  
1.375 [34.92]  
1.625 [41.28]  
1.875 [47.62]  
2.000 [50.80]  
2.375 [60.32]  
2.875 [73.02]  
3.125 [79.38]  
3.250 [82.55]  
3.625 [92.08]  
3.875 [98.42]  
4.000 [101.60]  
4.125 [104.78]  
4.500 [114.30]  
4.625 [117.48]  
5.125 [130.18]  
5.500 [139.70]  
5.625 [142.88]  
6.250 [158.75]  
6.375 [161.92]  
10  
12  
14  
15  
18  
22  
24  
25  
28  
30  
31  
32  
35  
36  
40  
43  
44  
49  
50  
For technical questions, contact Connectors@vishay.com  
www.vishay.com  
6
Document Number 36002  
Revision 14-Aug-02  
EB6  
Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C,  
Standard and Right Angle Terminals  
Vishay Dale  
PHYSICAL SPECIFICATIONS  
Type “3R” - Dip Solder, 0.025" [0.635mm] square terminals,  
0.180" [4.57mm] nominal terminal length x 0.150" [3.81mm]  
nominal terminal row spacing.  
Type “4R” - Dip Solder, 0.025" [0.635mm] square terminals,  
0.180" [4.57mm] nominal terminal length x 0.200" [5.08mm]  
nominal terminal row spacing.  
Contact Spacing: 0.125" [3.17mm] center to center.  
Contact Terminal Row Spacing:  
Standard - 0.250" [6.35mm] nominal.  
Right Angle - 0.200" [5.08mm] nominal and 0.150" [3.81mm]  
nominal.  
Card Thickness: 0.054" to 0.071" [1.37mm to 1.80mm].  
Card Slot Depth: 0.300" [7.62mm].  
Connector Polarization: Between contact polarization key(s)  
are located to the right of the contact position(s) designated.  
NOTE: High temperature burn-in, edgeboard connectors, with  
Contact Type: Bifurcated Cantilever Beam.  
Number of Contacts: 6, 10, 12, 14, 15, 18, 22, 24, 25, 28,  
30, 31, 32, 35, 36, 40, 43, 44, 49 and 50 per side.  
Contact Terminal Variation: Standard terminals.  
Type “C” - Dip Solder, 0.025" [0.635mm] square terminals,  
0.175" [4.44mm] nominal terminal length below standoffs.  
Type “D” - Dip Solder, 0.025" [0.635mm] square terminals,  
0.115" [2.92mm] nominal terminal length below standoffs.  
Type “K” - Wire Wrap™, 0.025" [0.635mm] square terminals,  
0.570" [14.48mm] nominal terminal length below standoffs.  
Contact Terminal Variation: Right angle terminals.  
Type “1R” - Dip Solder, 0.025" [0.635mm] square terminals,  
0.120" [3.05mm] nominal terminal length x 0.150" [3.81mm]  
nominal terminal row spacing.  
Type “2R” - Dip Solder, 0.025" [0.635mm] square terminals,  
0.120" [3.05mm] nominal terminal length x 0.200" [5.08mm]  
nominal terminal row spacing.  
0.125" [3.17mm] center to center are on page 20 of this catalog.  
MOUNTING VARIATIONS in inches [millimeters]  
Type “X”  
Type “XF”  
Type “XS”  
Right Angle  
Type “XFS”  
Right Angle  
Clearance Hole  
Clearance Hole  
Raised Mounting Flange  
Flush Mounting Flange  
Mounting Flange  
Mounting Flange  
0.060 [1.52] Ref.  
0.060 [1.52] Ref.  
0.060 [1.52] Ref.  
0.060 [1.52] Ref.  
Ø 0.125  
[3.17]  
0.125  
[3.17]  
Dia.  
0.125  
[3.17]  
Dia.  
0.125  
[3.17]  
Dia.  
0.125  
[3.17]  
0.250  
[6.35]  
0.250  
[6.35]  
0.250  
[6.35]  
0.125 [3.17]  
0.250 [6.35]  
0.430  
[10.92]  
0.610  
[15.49]  
Ref.  
0.430  
[10.92]  
0.610  
[15.49]  
Ref.  
0.610  
[15.49]  
Ref.  
0.610 [15.49]  
Ref.  
Type “Y”  
Type “YF”  
Type “W”  
Threaded Insert  
Threaded Insert  
No Mounting Flange  
Raised Mounting Flange  
Flush Mounting Flange  
0.060 [1.52] Ref.  
0.060 [1.52] Ref.  
0.060 [1.52] Ref.  
0.205 [5.21]  
4-40  
0.430  
[10.92]  
UNC-2B  
4-40  
UNC-2B  
0.250  
[6.35]  
0.250  
[6.35]  
0.610  
[15.49]  
Ref.  
0.430  
[10.92]  
0.610  
[15.49]  
Ref.  
0.610 [15.49]  
Ref.  
TERMINAL VARIATIONS in inches [millimeters]  
Type “1R”, “2R”, “3R” and “4R”  
Right Angle  
0.025 [0.635] Square Terminals  
Type “C” and “D”  
Solder Dip, Standard  
0.025 [0.635] Square Terminals 0.025 [0.635] Square Terminals  
Type “K”  
Wire Wrap™, Standard  
TYPE  
A
B
1R  
0.150 0.120 ± 0.030  
[3.81] [3.05 ± 0.762]  
B
0.250  
[6.35]  
0.250 [6.35]  
2R  
3R  
4R  
0.200 0.120 ± 0.030  
[5.08] [3.05 ± .762]  
To Fit  
0.590  
[14.99]  
0.050 ± 0.002  
[1.27 ± 0.051]  
Dia. Eyelet  
0.150 0.180 ± 0.030  
[3.81] [4.57 ± 0.762]  
A
0.570  
[14.48]  
0.200 0.180 ± 0.030  
[5.08] [4.57 ± 0.762]  
“C” = 0.175 [4.44]  
“D” = 0.115 [2.92]  
For technical questions, contact Connectors@vishay.com  
Document Number 36002  
Revision 14-Aug-02  
www.vishay.com  
7
Legal Disclaimer Notice  
Vishay  
Disclaimer  
All product specifications and data are subject to change without notice.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf  
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein  
or in any other disclosure relating to any product.  
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any  
information provided herein to the maximum extent permitted by law. The product specifications do not expand or  
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed  
therein, which apply to these products.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this  
document or by any conduct of Vishay.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless  
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such  
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting  
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding  
products designed for such applications.  
Product names and markings noted herein may be trademarks of their respective owners.  
Document Number: 91000  
Revision: 18-Jul-08  
www.vishay.com  
1

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
©2020 ICPDF网 联系我们和版权申明