EB633R14 [VISHAY]
Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C, Standard and Right Angle Terminals; 边板连接器,双读数, 0.125“ [ 3.17毫米] CC ,标准和直角终端型号: | EB633R14 |
厂家: | VISHAY |
描述: | Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C, Standard and Right Angle Terminals |
文件: | 总4页 (文件大小:148K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EB6
Vishay Dale
Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C,
Standard and Right Angle Terminals
FEATURES
• Grid Patterns: 0.125" C-C x 0.150" [3.17mm x 3.81mm],
0.125" C-C x 0.200" [3.17mm x 5.08mm] and
0.125" C-C x 0.250" [3.17mm x 6.35mm].
• Standard and right angle terminals.
• Greater design latitude:
3 body materials: Diallyl phthalate, phenolic, glass-filled
polyester and glass-filled polyphenylene sulfied.
7 contact termination styles: 3 standard, 4 right angle.
19 body sizes and 6 mounting styles.
• Selective gold plating.
• Accepts PC board thickness of 0.054" to 0.071" [1.37mm
to 1.80mm].
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without loss
of contact position.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File
E65524, Project 77CH3889.
ELECTRICAL SPECIFICATIONS
Current Rating: 3 amps.
Test Voltage Between Contacts:
At sea level: 1500VRMS.
At 70,000 feet [21,336 meters]: 325VRMS.
Insulation Resistance: 5000 Megohm minimum at 500VDC
potential.
APPLICATIONS
For use with 0.0625" [1.59mm] printed circuit boards requiring
an edgeboard type connector on 0.125" [3.17mm] centers.
Contact Resistance: 30 millivolts maximum at rated current
(with gold plating).
Operating Temperature: - 65°C to + 125°C.
MATERIAL SPECIFICATIONS
Body Material:
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
Humidity: 96 hours at 90% relative humidity at + 40°C, dried
at room temperature for 3 hours minimum, insulation
resistance was greater than 5000 Megohm.
Durability: After 500 cycles of insertion and withdrawal of a
0.070" [1.78mm] thick steel test board, contact resistance less
than 0.030V at 3 amps on gold plated contacts and individual
contact pair separation force when measured with a 0.054"
[1.37mm] thick steel test blade was greater than 1/2 ounce.
Shock: Three 50g shocks in each of 3 mutually perpendicular
planes with no loss of continuity.
Vibration: 2 hours in each of 3 mutually perpendicular planes,
frequency sweep 10 to 55cps at 0.06 double amplitude with
no loss of continuity.
“2” glass-filled phenolic per MIL-M-14, Type MFH dark green,
flame retardant (UL 94V-0).
“3” thermoplastic polyester, glass-filled, black, flame retardant
(UL 94V-0).
“5” thermoplastic polyphenylene sulfied, glass-filled, brown,
flame retardant (UL 94V-0).
Contacts: Phosphor bronze. (Ordering Information.)
Polarizing Key: Glass reinforced nylon, flame retardant
(UL94H-B).
Plating: Gold. (Ordering Information.)
ORDERING INFORMATION
K
EB6
3
40
SG
X
15
STANDARD
TERMINAL
VARIATIONS
MODEL
BODY MATERIAL
CONTACTS
CONTACT PLATING
MOUNTING
VARIATIONS
POLARIZING
KEY POSITIONS
SG = Selective Gold Plating
C, D, K,
1R, 2R,
3R, 4R
1 = Diallyl
6, 10, 12,
14, 15, 18,
22, 24, 25,
28, 30, 31,
32, 35, 36,
40, 43, 44,
49 and 50
per side.
Key(s) are located to
right of position(s)
designated. Use odd-
numbered contact for
ordering: -1, -3, -5, etc.
Required only when
polarizing keys are to
be factory installed.
NOTE: To order
(0.00003" [0.000762mm] minimum
thick) on contact area with Gold
Flash on terminal.
SGF = Selective Gold Plating
(0.000010" [0.000254mm] minimum
thick) on contact area with Gold
Flash on terminal.
All Gold Plating over 0.00005"
[0.00127mm] minimum Nickel
Underplate.
Contact factory for additional
plating options.
Phthalate
2 = Phenolic
3 = Glass-filled
Polyester
5 = Glass-filled
Polyphenylene
Sulfied
polarizing keys
individually, specify
Model PK-6.
For technical questions, contact Connectors@vishay.com
Document Number 36002
Revision 14-Aug-02
www.vishay.com
5
EB6
Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C,
Standard and Right Angle Terminals
Vishay Dale
DIMENSIONS in inches [millimeters]
0.060
[1.52]
R Typ.
0.060
[1.52]
Typ.
0.260
[6.60]
0.340
[8.64]
Typ.
A
B
C
0.125
[3.17]
Typ.
D
E
J
J
0.060
[1.52]
Typ.
See table for
contact and
mounting variations
0.365
[9.27]
Section J-J
0.250
[6.35]
Typ.
0.054 - 0.071 [1.37 - 1.80]
Card Thickness
0.180
[4.57]
Typ.
0.430
[10.92]
Typ.
0.610 [15.49]
Typ.
0.125 [3.17]
Point of
Contact
0.300 [7.62]
Depth of
Insertion
0.150 [3.81]
Polarizing Key:
When ordering polarizing
keys individually, specify
by the Model Number:
PK-6 between contacts.
Hand insertion tool, TPK-6,
provided upon request.
0.295
[7.49]
0.031
[0.787]
0.250
[6.35]
0.096 ± 0.002 [2.44 ± 0.050]
# OF CONTACT
POSITIONS
PER SIDE
A
B
C
D
E
6
1.555 [39.50]
2.055 [52.20]
2.305 [58.55]
2.555 [64.90]
2.680 [68.07]
3.055 [77.60]
3.555 [90.30]
3.805 [96.65]
3.930 [99.82]
4.305 [109.35]
4.555 [115.70]
4.680 [118.87]
4.805 [122.05]
5.180 [131.57]
5.305 [134.75]
5.805 [147.45]
6.180 [156.97]
6.305 [160.15]
6.930 [176.02]
7.055 [179.20]
1.295 [32.89]
1.795 [45.59]
2.045 [51.94]
2.295 [58.29]
2.420 [61.47]
2.795 [70.99]
3.295 [83.69]
3.545 [90.04]
3.670 [93.22]
4.045 [102.74]
4.295 [109.09]
4.420 [112.27]
4.545 [115.44]
4.920 [124.97]
5.045 [128.14]
5.545 [140.84]
5.920 [150.37]
6.045 [153.54]
6.670 [169.42]
6.795 [172.59]
0.875 [22.22]
1.375 [34.92]
1.625 [41.28]
1.875 [47.62]
2.000 [50.80]
2.375 [60.32]
2.875 [73.02]
3.125 [79.38]
3.250 [82.55]
3.625 [92.08]
3.875 [98.42]
4.000 [101.60]
4.125 [104.78]
4.500 [114.30]
4.625 [117.48]
5.125 [130.18]
5.500 [139.70]
5.625 [142.88]
6.250 [158.75]
6.375 [161.92]
1.035 [26.29]
1.535 [38.99]
1.785 [45.34]
2.035 [51.69]
2.160 [54.86]
2.535 [64.39]
3.035 [77.09]
3.285 [83.44]
3.410 [86.61]
3.785 [96.14]
4.035 [102.49]
4.160 [105.66]
4.285 [108.84]
4.660 [118.36]
4.785 [121.54]
5.285 [134.24]
5.660 [143.76]
5.785 [146.94]
6.410 [162.81]
6.535 [165.99]
0.875 [22.22]
1.375 [34.92]
1.625 [41.28]
1.875 [47.62]
2.000 [50.80]
2.375 [60.32]
2.875 [73.02]
3.125 [79.38]
3.250 [82.55]
3.625 [92.08]
3.875 [98.42]
4.000 [101.60]
4.125 [104.78]
4.500 [114.30]
4.625 [117.48]
5.125 [130.18]
5.500 [139.70]
5.625 [142.88]
6.250 [158.75]
6.375 [161.92]
10
12
14
15
18
22
24
25
28
30
31
32
35
36
40
43
44
49
50
For technical questions, contact Connectors@vishay.com
www.vishay.com
6
Document Number 36002
Revision 14-Aug-02
EB6
Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C,
Standard and Right Angle Terminals
Vishay Dale
PHYSICAL SPECIFICATIONS
Type “3R” - Dip Solder, 0.025" [0.635mm] square terminals,
0.180" [4.57mm] nominal terminal length x 0.150" [3.81mm]
nominal terminal row spacing.
Type “4R” - Dip Solder, 0.025" [0.635mm] square terminals,
0.180" [4.57mm] nominal terminal length x 0.200" [5.08mm]
nominal terminal row spacing.
Contact Spacing: 0.125" [3.17mm] center to center.
Contact Terminal Row Spacing:
Standard - 0.250" [6.35mm] nominal.
Right Angle - 0.200" [5.08mm] nominal and 0.150" [3.81mm]
nominal.
Card Thickness: 0.054" to 0.071" [1.37mm to 1.80mm].
Card Slot Depth: 0.300" [7.62mm].
Connector Polarization: Between contact polarization key(s)
are located to the right of the contact position(s) designated.
NOTE: High temperature burn-in, edgeboard connectors, with
Contact Type: Bifurcated Cantilever Beam.
Number of Contacts: 6, 10, 12, 14, 15, 18, 22, 24, 25, 28,
30, 31, 32, 35, 36, 40, 43, 44, 49 and 50 per side.
Contact Terminal Variation: Standard terminals.
Type “C” - Dip Solder, 0.025" [0.635mm] square terminals,
0.175" [4.44mm] nominal terminal length below standoffs.
Type “D” - Dip Solder, 0.025" [0.635mm] square terminals,
0.115" [2.92mm] nominal terminal length below standoffs.
Type “K” - Wire Wrap™, 0.025" [0.635mm] square terminals,
0.570" [14.48mm] nominal terminal length below standoffs.
Contact Terminal Variation: Right angle terminals.
Type “1R” - Dip Solder, 0.025" [0.635mm] square terminals,
0.120" [3.05mm] nominal terminal length x 0.150" [3.81mm]
nominal terminal row spacing.
Type “2R” - Dip Solder, 0.025" [0.635mm] square terminals,
0.120" [3.05mm] nominal terminal length x 0.200" [5.08mm]
nominal terminal row spacing.
0.125" [3.17mm] center to center are on page 20 of this catalog.
MOUNTING VARIATIONS in inches [millimeters]
Type “X”
Type “XF”
Type “XS”
Right Angle
Type “XFS”
Right Angle
Clearance Hole
Clearance Hole
Raised Mounting Flange
Flush Mounting Flange
Mounting Flange
Mounting Flange
0.060 [1.52] Ref.
0.060 [1.52] Ref.
0.060 [1.52] Ref.
0.060 [1.52] Ref.
Ø 0.125
[3.17]
0.125
[3.17]
Dia.
0.125
[3.17]
Dia.
0.125
[3.17]
Dia.
0.125
[3.17]
0.250
[6.35]
0.250
[6.35]
0.250
[6.35]
0.125 [3.17]
0.250 [6.35]
0.430
[10.92]
0.610
[15.49]
Ref.
0.430
[10.92]
0.610
[15.49]
Ref.
0.610
[15.49]
Ref.
0.610 [15.49]
Ref.
Type “Y”
Type “YF”
Type “W”
Threaded Insert
Threaded Insert
No Mounting Flange
Raised Mounting Flange
Flush Mounting Flange
0.060 [1.52] Ref.
0.060 [1.52] Ref.
0.060 [1.52] Ref.
0.205 [5.21]
4-40
0.430
[10.92]
UNC-2B
4-40
UNC-2B
0.250
[6.35]
0.250
[6.35]
0.610
[15.49]
Ref.
0.430
[10.92]
0.610
[15.49]
Ref.
0.610 [15.49]
Ref.
TERMINAL VARIATIONS in inches [millimeters]
Type “1R”, “2R”, “3R” and “4R”
Right Angle
0.025 [0.635] Square Terminals
Type “C” and “D”
Solder Dip, Standard
0.025 [0.635] Square Terminals 0.025 [0.635] Square Terminals
Type “K”
Wire Wrap™, Standard
TYPE
A
B
1R
0.150 0.120 ± 0.030
[3.81] [3.05 ± 0.762]
B
0.250
[6.35]
0.250 [6.35]
2R
3R
4R
0.200 0.120 ± 0.030
[5.08] [3.05 ± .762]
To Fit
0.590
[14.99]
0.050 ± 0.002
[1.27 ± 0.051]
Dia. Eyelet
0.150 0.180 ± 0.030
[3.81] [4.57 ± 0.762]
A
0.570
[14.48]
0.200 0.180 ± 0.030
[5.08] [4.57 ± 0.762]
“C” = 0.175 [4.44]
“D” = 0.115 [2.92]
For technical questions, contact Connectors@vishay.com
Document Number 36002
Revision 14-Aug-02
www.vishay.com
7
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
EB633R14SG
Card Edge Connector, 28 Contact(s), 2 Row(s), Right Angle, 0.125 inch Pitch, Solder Terminal, Locking, Black Insulator
VISHAY
EB633R14SGFW15
Card Edge Connector, 28 Contact(s), 2 Row(s), Right Angle, 0.125 inch Pitch, Solder Terminal, Black Insulator, Receptacle
VISHAY
EB633R14SGW15
Card Edge Connector, 28 Contact(s), 2 Row(s), Right Angle, 0.125 inch Pitch, Solder Terminal, Black Insulator, Receptacle
VISHAY
EB633R14SGX15
Edgeboard Connectors, Dual Readout, 0.125 (3.17 mm) C-C, Standard and Right Angle Terminals
VISHAY
EB633R14SGXFS15
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,28 CONTACTS,0.125 PITCH,R ANGLE PC TAIL TERMINAL,HOLE .125-.137
VISHAY
EB633R14SGXS
CONNECTOR, 28 CONTACT(S), FEMALE, RIGHT ANGLE SINGLE PART CARD EDGE CONN, SOLDER
VISHAY
EB633R14SGXS15
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,28 CONTACTS,0.125 PITCH,R ANGLE PC TAIL TERMINAL,HOLE .125-.137
VISHAY
EB633R15
Edgeboard Connectors, Dual Readout, 0.125" [3.17mm] C-C, Standard and Right Angle Terminals
VISHAY
EB633R15SGFW15
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,30 CONTACTS,0.125 PITCH,R ANGLE PC TAIL TERMINAL
VISHAY
EB633R15SGFXS15
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,30 CONTACTS,0.125 PITCH,R ANGLE PC TAIL TERMINAL,HOLE .125-.137
VISHAY
EB633R15SGW15
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,30 CONTACTS,0.125 PITCH,R ANGLE PC TAIL TERMINAL
VISHAY
EB633R15SGXS15
Card Edge Connector, 30 Contact(s), 2 Row(s), Right Angle, 0.125 inch Pitch, Solder Terminal, Hole .125-.137, Black Insulator, Receptacle
VISHAY
©2020 ICPDF网 联系我们和版权申明