EB7-D-C12 [VISHAY]
Card Edge Connector;
| 型号： | EB7-D-C12 |
| 厂家： | 
VISHAY |
| 描述： | Card Edge Connector 连接器 |
| 文件： | 总3页 (文件大小：57K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Model EB7D
Vishay Dale
Edgeboard Connectors
Dual Readout
FEATURES
• .156" C-C x .140" grid [3.96mm x 3.56mm].
• Bifurcated bellows contacts provide 2 flexing contact surfaces
to assure positive contact under adverse conditions such as
vibration or PC board irregularities.
• Accepts PC board thickness of .054" - .071" [1.37mm -
1.80mm].
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without loss of
a contact position.
• Selective gold plating.
• Polarizing key is reinforced nylon, may be inserted by hand,
requires no adhesive.
ELECTRICAL SPECIFICATIONS
Current Rating: 5 amps.
Test Voltage Between Contacts:
At sea level: 1800 V RMS.
• Protected entry, provided by recessed leading edge of contact,
permits the card slot to straighten and align the board before
electrical contact is made. Prevents damage to contact which
might be caused by warped or out of tolerance boards.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File E65524,
Project 77CH3889.
At 70,000 feet [21,336 meters]: 450 V RMS.
Insulation Resistance: 5000 Megohm minimum at
500 VDC potential.
Contact Resistance: 30 millivolts maximum at rated current
(with gold plating).
Operating Temperature: - 55°C to + 125°C.
Humidity: 96 hours at 90% relative humidity at + 40°C, dried
at room temperature for 3 hours minimum, insulation
resistance 5000 Megohm.
Durability: (With gold plating.) After 500 cycles of insertion
and withdrawal of .070" [1.78mm] thick steel test gauge,
contact resistance less than .030 V at 5 amps and
individual contact retention force when measured with a
.054" [1.37mm] thick steel test slug greater than 1/2 ounce.
Shock: Three 50g shocks in each of 3 mutually
perpendicular planes with no loss of continuity.
Vibration: 2 hours in each of 3 mutually perpendicular
planes, frequency sweep 10 to 55 cps at .06 double
amplitude with no loss of continuity.
APPLICATIONS
For use with .062" [1.57mm] printed circuit boards requiring an
edgeboard type connector on .156" [3.96mm] centers.
MATERIAL SPECIFICATIONS
Body: (Standard) Glass-filled phenolic per MIL-M-14, dark
green, flame retardant (UL 94V-0).
(Optional - See How to Order):
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94V-0).
“5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94V-0).
Contacts: Phosphor bronze.
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B).
Contact Plating: Gold (See How to Order).
NOTE: High temperature burn-in, edgeboard connectors,
.156" [3.96mm] center to center are on page 19 of this catalog.
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows.
Number of Contacts: 6, 10, 12, 15, 18, 22, 36, 43 per side.
Contact Spacing: .156" [3.96mm] center to center.
Card Thickness: .054" to .071" [1.37mm to 1.80mm].
Card Slot Depth: Dual Readout = .260" [6.60mm].
MOUNTING VARIATIONS [Numbers in brackets indicate millimeters]
Type “V”
Type “VI”
Type “W”
Type “X”
Clearance Hole
Clearance Hole
No Mounting Pad
No Mounting Flange
Clearance Hole
.250
[6.35]
Ref.
.250
[6.35]
Ref.
.250
[6.35]
Ref.
.010 [.254]
.000 [.000]
.142
[3.61]
Dia.
.220
[5.59]
Ref.
.142 [3.61] Dia.
.128 [3.25] Dia.
Type “XI”
Clearance Hole
No Mounting Pad
Type “Y”
Threaded Insert
Type “Z”
Floating Bushing Radial Float .047 [1.19]
.250
[6.35]
Ref.
.250 [6.35]
Ref.
.250
[6.35]
Ref.
NOTE: Overall body length
increased by .060 [1.52].
.250
[6.35]
Dia.
.116
[2.95]
Dia.
4-40
.218
[5.54]
Ref.
.128
[3.25]
Dia.
.220
[5.59]
Ref.
UNC-2B
.270 [6.86]
Document Number 36003
Revision 01-Nov-99
www.vishay.com
7
Model EB7D
Vishay Dale
DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters]
.030 [.762]
.062 ± .010
[1.57 ± .254]
R Typ.
A
B
D
E
C
C
.156 ± .005
[3.96 ± .127]
Non-Cumulative
See Table
for Mounting
Variations
See Table
for Contact
Variations
.250
F
[6.35]
± .010 [.254]
.440
[11.18]
Section C-C
Polarizing Key
Type “A”
Types “C” and “K”
.028
[.711]
.054 - .071
[1.37 - 1.80]
.054 - .071
[1.37 - 1.80]
.230
[5.84]
.260 [6.60]
Depth of Card
Insertion
.260 [6.60]
Depth of Card
.245
[6.22]
Insertion
.250
[6.35]
When ordering polarizing keys individually, specify
Model Number: PK-7 between contacts. Hand
insertion tool, TPK-7, provided on request.
.140 [3.56]
# OF CONTACT
POSITIONS
A
B
D
E
F
6
10
12
15
18
22
36
43
1.78 [45.21]
2.41 [61.21]
2.72 [69.09]
3.19 [81.03]
3.66 [92.96]
4.28 [108.71]
6.53 [165.86]
7.62 [193.55]
1.53 [38.86]
1.22 [30.99]
1.84 [46.74]
2.16 [54.86]
2.62 [66.55]
3.09 [78.49]
3.72 [94.49]
5.91 [150.11]
7.00 [177.80]
1.10 [27.94]
1.72 [43.69]
2.04 [51.82]
2.50 [63.50]
2.97 [75.44]
3.60 [91.44]
5.78 [146.81]
6.80 [172.72]
.328 [8.33]
.328 [8.33]
.328 [8.33]
.328 [8.33]
.328 [8.33]
.328 [8.33]
.438 [11.13]
.500 [12.70]
2.16 [54.86]
2.47 [62.74]
2.94 [74.68]
3.41 [86.61]
4.03 [102.36]
6.22 [157.99]
7.30 [185.42]
www.vishay.com
8
Document Number 36003
Revision 01-Nov-99
Model EB7D
Vishay Dale
TERMINAL VARIATIONS [Numbers in brackets indicate millimeters]
Type “A”
Pierced
Type “C” and “K”
Solder Dip
Type “E”
Card Extender
To fit .051 [1.30]
Dia. Eyelet
To fit 3,
#22 AWG
Wires
.200 ± .015
[5.08 ± .381]
.086
[2.18]
.100
[2.54]
.086 x .008
[2.18 x .203]
.140 ± .015
[3.56 ± .381]
.050
[1.27]
G
See Table
120°
Typ.
15°
Typ.
Uses
Type “A”
Contact
TYPE
G
.220 ± .015
[5.59 ± .381]
C
K
.125 ± .015 [3.18 ± .381]
.200 ± .015 [5.08 ± .381]
HOW TO ORDER
EB7
1
D
B
A
22
G
X
A
MODEL
BODY
MATERIAL
DUAL
READOUT
OPTIONAL
CONTACTS
STANDARD
TERMINAL
VARIATIONS
CONTACTS
CONTACT
PLATING
MOUNTING
VARIATIONS
POLARIZING
KEY
POSITIONS
A, E,
C or K
Optional Body Material
1 = Diallyl Phthalate.
3 = Glass-filled
Polyester.
5 = Glass-filled
Polyphenylene
Sulfied.
Key(s) are located to
right of position(s)
designated.
Required only when
polarizing keys are to
be factory installed.
Omit for standard
phenolic.
Beryllium Copper contacts
optional. Available in “A”
and “E” contact styles only.
(Omit for standard.)
6, 10, 12, 15,
18, 22, 36 or 43
SG = Selective Gold Plating (.00003"
[.000762mm] minimum thick) on contact
area with Gold Flash on terminal.
SGF = Selective Gold Plating (.00001"
[.000254mm] minimum thick) on contact
area with Gold Flash on terminal.
All Gold Plating over .00005" [.00127mm]
minimum, Nickel Underplate.
Contact factory for additional plating
options.
Document Number 36003
Revision 01-Nov-99
www.vishay.com
9
相关型号：
EB7-D-E10
CONNECTOR, 20 CONTACT(S), FEMALE, VERTICAL SINGLE PART CARD EDGE CONN, CARD EXTENDER
VISHAY
©2020 ICPDF网 联系我们和版权申明